Add .dsc, .fdf and .dec files for a Cadence CSP platform configured
with a single Cortex-A53, GIC-500, Cadence UART and Cadence PCIe Root
Complex.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Scott Telford <stelford@cadence.com>
---
CadencePkg/CadenceCsp.dsc | 672 +++++++++++++++++++++++++++++++++++++++++++
CadencePkg/CadenceCsp.fdf | 412 ++++++++++++++++++++++++++
CadencePkg/CadenceCspPkg.dec | 55 ++++
3 files changed, 1139 insertions(+)
create mode 100644 CadencePkg/CadenceCsp.dsc
create mode 100644 CadencePkg/CadenceCsp.fdf
create mode 100644 CadencePkg/CadenceCspPkg.dec
diff --git a/CadencePkg/CadenceCsp.dsc b/CadencePkg/CadenceCsp.dsc
new file mode 100644
index 0000000..eb98a29
--- /dev/null
+++ b/CadencePkg/CadenceCsp.dsc
@@ -0,0 +1,672 @@
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = CadenceCsp
+ PLATFORM_GUID = 262f8c6b-047b-4afe-b317-7c90b795beb8
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 1.25
+!ifdef $(EDK2_OUT_DIR)
+ OUTPUT_DIRECTORY = $(EDK2_OUT_DIR)
+!else
+ OUTPUT_DIRECTORY = Build/CadenceCsp
+!endif
+ SUPPORTED_ARCHITECTURES = AARCH64
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = CadencePkg/CadenceCsp.fdf
+
+ SECURE_BOOT_ENABLE = FALSE
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+
+ # Virtio Support
+ VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+!endif
+
+!if $(TARGET) == RELEASE
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+!else
+ DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+!endif
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+ PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ ReportStatusCodeLib|MdePkg/Library/BaseReportStatusCodeLibNull/BaseReportStatusCodeLibNull.inf
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+
+ UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+
+ #
+ # Assume everything is fixed at build
+ #
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+
+ # Networking Requirements
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+ DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
+ UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+ IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+
+ # ARM Architectural Libraries
+ CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
+ CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
+ ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
+ DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf
+ ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicLib.inf
+ ArmGicArchLib|ArmPkg/Library/ArmGicArchLib/ArmGicArchLib.inf
+ ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+ ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
+
+ PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
+ EfiResetSystemLib|CadencePkg/Library/CadenceCspResetSystemLib/CadenceCspResetSystemLib.inf
+
+ RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/TemplateRealTimeClockLib.inf
+
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+ GenericBdsLib|IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsLib.inf
+ PlatformBdsLib|ArmPlatformPkg/Library/PlatformIntelBdsLib/PlatformIntelBdsLib.inf
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+
+ BdsLib|ArmPkg/Library/BdsLib/BdsLib.inf
+
+# CSP Libraries
+ SerialPortLib|CadencePkg/Library/CadenceCspSerialPortLib/CspSerialPortLib.inf
+
+ #
+ # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
+ # in the debugger will show load and unload commands for symbols. You can cut and paste this
+ # into the command window to load symbols. We should be able to use a script to do this, but
+ # the version of RVD I have does not support scripts accessing system memory.
+ #
+ #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
+ PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+ #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+
+ DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+ DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
+
+ AcpiLib|EmbeddedPkg/Library/AcpiLib/AcpiLib.inf
+ FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
+
+ ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+ FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+
+ #
+ # Secure Boot dependencies
+ #
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
+ OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
+ TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
+ AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+
+ # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
+ PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
+!else
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+!endif
+ VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+
+[LibraryClasses.common.SEC]
+ ArmPlatformSecLib|CadencePkg/Library/CadenceCspSecLib/CadenceCspSecLib.inf
+ ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLibSec.inf
+ DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLibBase.inf
+
+!ifdef $(EDK2_SKIP_PEICORE)
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+!endif
+
+ # Trustzone Support
+ ArmTrustedMonitorLib|ArmPlatformPkg/Library/ArmTrustedMonitorLibNull/ArmTrustedMonitorLibNull.inf
+
+ ArmGicArchLib|ArmPkg/Library/ArmGicArchSecLib/ArmGicArchSecLib.inf
+
+
+[LibraryClasses.common.PEI_CORE]
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.PEIM]
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.SEC, LibraryClasses.common.PEIM]
+ MemoryInitPeiLib|ArmPlatformPkg/MemoryInitPei/MemoryInitPeiLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+ HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+ MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+ DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
+!endif
+
+[LibraryClasses.ARM, LibraryClasses.AARCH64]
+ #
+ # It is not possible to prevent the ARM compiler for generic intrinsic functions.
+ # This library provides the instrinsic functions generate by a given compiler.
+ # [LibraryClasses.ARM] and NULL mean link this library into all ARM images.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+ # Add support for GCC stack protector
+ NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION, LibraryClasses.common.DXE_RUNTIME_DRIVER, LibraryClasses.common.DXE_DRIVER]
+ PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+ PciHostBridgeLib|CadencePkg/Library/CadencePciHostBridgeLib/CdnsPciHostBridgeLib.inf
+ PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
+ PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
+ PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
+
+[BuildOptions]
+ GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+ GCC:*_*_ARM_DLINK_FLAGS = -z common-page-size=0x1000
+ GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|TRUE
+
+ #
+ # Control what commands are supported from the UI
+ # Turn these on and off to add features or save size
+ #
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE
+
+ # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
+ gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+
+[PcdsFixedAtBuild.common]
+ gArmPlatformTokenSpaceGuid.PcdFirmwareVendor|"Cadence CSP"
+!ifdef $(FIRMWARE_VER)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"$(FIRMWARE_VER)"
+!endif
+
+ # Only one core enters UEFI, and PSCI is implemented in EL3 by ATF
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+
+ # Stacks for MPCores in Normal World
+ # Non-Trusted SRAM
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gArmPlatformTokenSpaceGuid.PcdCPUCoreSecondaryStackSize|0x0
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+ #
+ # ARM Pcds
+ #
+ # Stacks for MPCores in Secure World
+ gArmPlatformTokenSpaceGuid.PcdCPUCoresSecStackBase|0x3F000000
+ # Stacks for MPCores in Normal World
+ gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x3F020000
+
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x10000000
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x30000000
+
+ ## Trustzone enable (to make the transition from EL3 to NS EL2 in ArmPlatformPkg/Sec)
+ gArmTokenSpaceGuid.PcdTrustzoneSupport|TRUE
+
+ #
+ # ARM General Interrupt Controller
+ #
+ gArmTokenSpaceGuid.PcdGicDistributorBase|0xfd100000
+ gArmTokenSpaceGuid.PcdGicRedistributorsBase|0xfd140000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE
+
+ #
+ # Cadence PCIe Root Complex
+ #
+ gArmTokenSpaceGuid.PcdPciBusMax|31
+ gArmTokenSpaceGuid.PcdPciIoBase|0x0
+ gArmTokenSpaceGuid.PcdPciIoSize|0x01000000
+ gArmTokenSpaceGuid.PcdPciMmio32Base|0x42000000
+ gArmTokenSpaceGuid.PcdPciMmio32Size|0x01000000
+
+ gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0x40000000
+ gArmTokenSpaceGuid.PcdPciIoTranslation|0x43000000
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|24
+
+ # Use the serial console (ConIn & ConOut)
+ gArmPlatformTokenSpaceGuid.PcdDefaultConOutPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()"
+ gArmPlatformTokenSpaceGuid.PcdDefaultConInPaths|L"VenHw(D3987D4B-971A-435F-8CAF-4967EB627241)/Uart(115200,8,N,1)/VenPcAnsi()"
+
+ #
+ # ARM Architectural Timer Frequency
+ #
+ # Set tick frequency value to 100MHz
+ gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|100000000
+
+ # the entire address space can be covered by 36 bit VAs
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|36
+
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
+ gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
+ gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
+
+ # DEBUG_ASSERT_ENABLED 0x01
+ # DEBUG_PRINT_ENABLED 0x02
+ # DEBUG_CODE_ENABLED 0x04
+ # CLEAR_MEMORY_ENABLED 0x08
+ # ASSERT_BREAKPOINT_ENABLED 0x10
+ # ASSERT_DEADLOOP_ENABLED 0x20
+!if $(TARGET) == RELEASE
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
+!endif
+
+ # DEBUG_INIT 0x00000001 // Initialization
+ # DEBUG_WARN 0x00000002 // Warnings
+ # DEBUG_LOAD 0x00000004 // Load events
+ # DEBUG_FS 0x00000008 // EFI File system
+ # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
+ # DEBUG_PAGE 0x00000020 // Alloc & Free (page)
+ # DEBUG_INFO 0x00000040 // Informational debug messages
+ # DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers
+ # DEBUG_VARIABLE 0x00000100 // Variable
+ # DEBUG_BM 0x00000400 // Boot Manager
+ # DEBUG_BLKIO 0x00001000 // BlkIo Driver
+ # DEBUG_NET 0x00004000 // SNP Driver
+ # DEBUG_UNDI 0x00010000 // UNDI Driver
+ # DEBUG_LOADFILE 0x00020000 // LoadFile
+ # DEBUG_EVENT 0x00080000 // Event messages
+ # DEBUG_GCD 0x00100000 // Global Coherency Database changes
+ # DEBUG_CACHE 0x00200000 // Memory range cachability changes
+ # DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may
+ # // significantly impact boot performance
+ # DEBUG_ERROR 0x80000000 // Error
+# gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000000F
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0x8000054F
+
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedAutomaticBootCommand|""
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedDefaultTextColor|0x07
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedMemVariableStoreSize|0x10000
+
+ #
+ # Optional feature to help prevent EFI memory map fragments
+ # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
+ # Values are in EFI Pages (4K). DXE Core will make sure that
+ # at least this much of each type of memory can be allocated
+ # from a single memory range. This way you only end up with
+ # maximum of two fragements for each type in the memory map
+ # (the memory used, and the free memory that was prereserved
+ # but not used).
+ #
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|80
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|65
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|400
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|20000
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
+
+ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ # override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
+ gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04
+!endif
+
+# Generic UART PCDs
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1
+
+#
+# Cadence CSP Base Components PCDs
+#
+ gCadenceCspTokenSpaceGuid.PcdCspSysRegBase|0xfd020000
+ gCadenceCspTokenSpaceGuid.PcdCspSysRegSize|0x00001000
+ gCadenceCspTokenSpaceGuid.PcdCspSerialBase|0xfd000000
+ gCadenceCspTokenSpaceGuid.PcdCspSerialSize|0x00001000
+
+# Cadence xHCI
+# gCadenceCspTokenSpaceGuid.PcdCadenceUsbXhciBaseAddress|0x70000000
+# gCadenceCspTokenSpaceGuid.PcdCadenceUsbXhciSize|0x7009ffff
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+
+ #
+ # SEC
+ #
+ CadencePkg/Sec/Sec.inf {
+ <LibraryClasses>
+ # Use the implementation which set the Secure bits
+ ArmGicLib|ArmPkg/Drivers/ArmGic/ArmGicSecLib.inf
+ }
+
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+
+ #
+ # SATA Controller
+ #
+ MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
+ EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf
+
+ #
+ # NVMe boot devices
+ #
+ MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+ #
+ # Networking stack
+ #
+ MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+ MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+ # FV Filesystem
+ MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ ShellPkg/Application/Shell/Shell.inf {
+ <LibraryClasses>
+ ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf
+ HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+ }
+
+!ifdef ARM_SBSA_ACS
+ # ARM SBSA ACS app
+ AppPkg/Applications/sbsa-acs/uefi_app/SbsaAvs.inf {
+ <LibraryClasses>
+ SbsaPalLib|AppPkg/Applications/sbsa-acs/platform/pal_uefi/SbsaPalLib.inf
+ SbsaValLib|AppPkg/Applications/sbsa-acs/val/SbsaValLib.inf
+ ShellCEntryLib|ShellPkg/Library/UefiShellCEntryLib/UefiShellCEntryLib.inf
+ }
+!endif
+
+ #
+ # PEI Phase modules
+ #
+!ifdef EDK2_SKIP_PEICORE
+ # UEFI is placed in RAM by bootloader
+ ArmPlatformPkg/PrePi/PeiUniCore.inf {
+ <LibraryClasses>
+ ArmPlatformLib|CadencePkg/Library/CadenceCspLib/CadenceCspLib.inf
+ }
+!else
+ # UEFI lives in FLASH and copies itself to RAM
+ ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+ MdeModulePkg/Core/Pei/PeiMain.inf
+ MdeModulePkg/Universal/PCD/Pei/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+ ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+ ArmPkg/Drivers/CpuPei/CpuPei.inf
+ IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
+ Nt32Pkg/BootModePei/BootModePei.inf
+ MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+ MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ }
+!endif
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ }
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
+ <LibraryClasses>
+ NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
+ }
+ SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!else
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!endif
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # ACPI Support
+ #
+ MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+ CadencePkg/AcpiTables/AcpiTables.inf
+
+ ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ # Required by PCI
+ UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+
+ #
+ # PCI Support
+ #
+ MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
+ MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
+
+!ifdef INTEL_UNDI_BIN
+ CadencePkg/Drivers/IntelUndiPkg/Binary/GigUndiDxe.inf
+!endif
+
+ # Simple TextIn/TextOut for UEFI Terminal
+ EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
+
+ # SMBIOS Support
+
+ MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+ #
+ # Platform Driver
+ #
+ OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
diff --git a/CadencePkg/CadenceCsp.fdf b/CadencePkg/CadenceCsp.fdf
new file mode 100644
index 0000000..ecea87a
--- /dev/null
+++ b/CadencePkg/CadenceCsp.fdf
@@ -0,0 +1,412 @@
+#
+# Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.
+# Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+[FD.Sec_CDNS_CSP_AARCH64_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device.
+Size = 0x00020000|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device
+ErasePolarity = 1
+BlockSize = 0x00002000
+NumBlocks = 0x10
+
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x00020000
+gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
+FV = FVMAIN_SEC
+
+
+[FD.CDNS_CSP_AARCH64_EFI]
+BaseAddress = 0x0020000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
+Size = 0x00400000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
+ErasePolarity = 1
+
+# This one is tricky, it must be: BlockSize * NumBlocks = Size
+BlockSize = 0x00001000
+NumBlocks = 0x400
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+0x00000000|0x00280000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FVMAIN_SEC]
+FvAlignment = 8
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF CadencePkg/Sec/Sec.inf
+
+
+[FV.FvMain]
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+FvNameGuid = b1e2a5cf-5357-4fc8-9532-49f3ce327bd3
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!endif
+ INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ # Required by PCI
+ INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
+
+ #
+ # PCI Support
+ #
+ INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
+ INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
+!ifdef INTEL_UNDI_BIN
+ INF CadencePkg/Drivers/IntelUndiPkg/Binary/GigUndiDxe.inf
+!endif
+
+ # ACPI Support
+ #
+ INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
+ INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ INF RuleOverride=ACPITABLE CadencePkg/AcpiTables/AcpiTables.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+
+ INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatBinPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ # SMBIOS Support
+ #
+ INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
+
+ #
+ # Platform Driver
+ #
+ INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
+ #
+ # SATA Controller
+ #
+ INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
+ INF EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf
+
+ #
+ # NVMe boot devices
+ #
+ INF MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+
+ #
+ # Networking stack
+ #
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
+ INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+!ifdef ARM_SBSA_ACS
+ # ARM SBSA ACS app
+ INF AppPkg/Applications/sbsa-acs/uefi_app/SbsaAvs.inf
+!endif
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
+
+ #
+ # TianoCore logo (splash screen)
+ #
+ FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
+ SECTION RAW = MdeModulePkg/Logo/Logo.bmp
+ }
+
+ # FV Filesystem
+ INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
+
+ #
+ # FDT installation
+ #
+ # The UEFI driver is at the end of the list of the driver to be dispatched
+ # after the device drivers (eg: Ethernet) to ensure we have support for them.
+# INF EmbeddedPkg/Drivers/FdtPlatformDxe/FdtPlatformDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+!if $(EDK2_SKIP_PEICORE) == 1
+ INF ArmPlatformPkg/PrePi/PeiUniCore.inf
+!else
+ INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
+ INF MdeModulePkg/Core/Pei/PeiMain.inf
+ INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
+ INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
+ INF ArmPkg/Drivers/CpuPei/CpuPei.inf
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
+ INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
+ INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
+ INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
+!endif
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) FIXED {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED 4caac18f-ffe5-48f2-86a5-23a615120637 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ }
diff --git a/CadencePkg/CadenceCspPkg.dec b/CadencePkg/CadenceCspPkg.dec
new file mode 100644
index 0000000..c5776cf
--- /dev/null
+++ b/CadencePkg/CadenceCspPkg.dec
@@ -0,0 +1,55 @@
+#/** @file
+# Cadence CSP package.
+#
+# Copyright (c) 2012-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2017, Cadence Design Systems, Inc. All rights reserved.
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ DEC_SPECIFICATION = 1.25
+ PACKAGE_NAME = CadenceCspPkg
+ PACKAGE_GUID = 593f66c2-fb57-4aa7-8bd0-149d52443f21
+ PACKAGE_VERSION = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+[Includes.common]
+ Include # Root include for the package
+
+[Guids.common]
+ gCadenceCspTokenSpaceGuid = { 0x593f66c2, 0xfb57, 0x4aa7, { 0x8b, 0xd0, 0x14, 0x9d, 0x52, 0x44, 0x3f, 0x21 } }
+
+[PcdsFixedAtBuild.common]
+ # Cadence CSP System Registers
+ gCadenceCspTokenSpaceGuid.PcdCspSysRegBase|0|UINT64|0x000000C0
+ gCadenceCspTokenSpaceGuid.PcdCspSysRegSize|0|UINT32|0x000000D0
+
+ # Cadence UART
+ gCadenceCspTokenSpaceGuid.PcdCspSerialBase|0|UINT64|0x000000C1
+ gCadenceCspTokenSpaceGuid.PcdCspSerialSize|0|UINT32|0x000000D1
+
+ # Cadence PCIe
+ gCadenceCspTokenSpaceGuid.PcdPcieRootPortBaseAddress|0xfb000000|UINT64|0x0000000C
+ gCadenceCspTokenSpaceGuid.PcdPcie1RootPortBaseAddress|0xfc000000|UINT64|0x000000CD
+ gCadenceCspTokenSpaceGuid.PcdPciConfigurationSpaceBaseAddress|0x40000000|UINT64|0x00000011
+ gCadenceCspTokenSpaceGuid.PcdPciConfigurationSpaceSize|0x02000000|UINT64|0x00000012
+
+ ## Timeout value for displaying progressing bar in before boot OS.
+ # According to UEFI 2.0 spec, the default TimeOut should be 0xffff.
+ gArmPlatformTokenSpaceGuid.PcdPlatformBootTimeOut|3|UINT16|0x0000001A
--
2.2.2
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.