From nobody Thu Dec 26 01:43:59 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1507459795845553.3245474807575; Sun, 8 Oct 2017 03:49:55 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 8321C2095B073; Sun, 8 Oct 2017 03:46:28 -0700 (PDT) Received: from mail-lf0-x231.google.com (mail-lf0-x231.google.com [IPv6:2a00:1450:4010:c07::231]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 488DC2095B070 for ; Sun, 8 Oct 2017 03:46:27 -0700 (PDT) Received: by mail-lf0-x231.google.com with SMTP id b127so24477568lfe.9 for ; Sun, 08 Oct 2017 03:49:53 -0700 (PDT) Received: from enkidu.local (31-172-191-173.noc.fibertech.net.pl. [31.172.191.173]) by smtp.gmail.com with ESMTPSA id y17sm930370lfj.0.2017.10.08.03.49.49 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sun, 08 Oct 2017 03:49:50 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: None (no SPF record) identity=mailfrom; client-ip=2a00:1450:4010:c07::231; helo=mail-lf0-x231.google.com; envelope-from=mw@semihalf.com; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=semihalf-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=uGfBw4HminSdXGovi0RmbYEgBI1Oy/8SoyXNyfCkU44=; b=zlwDD1Yg35I4x67CQV9LGsVRUdjwt0R+v7heixwA04522nVbf9eg8ad348Gldfkf2O Hj1YLwfBqC83CJelMQAb8ognhv36yPyjMmfl9pokd2Bx27Tsao7iyn6ZfRHUl7ZSGOGT 0UWsfdvFOUdu2nV07jtFfIYsMtOLuz1rnAP26G94pjlSSBP9hZ8iUkIRcw3tOgIZStUt R+xwBmNDUukWz+aMXz1Cev7uNQZCWwIumTh95gRMgZtkJhv8K556t0aQVk4gkC16I3ep iPtUoQsYlUkupQk9ArduefXS+yu2hrRvijzpGEbA186St8FY7sJ0fuF50x5tFW7BiTd0 Ut3A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=uGfBw4HminSdXGovi0RmbYEgBI1Oy/8SoyXNyfCkU44=; b=YZUYmahIF2SUNS2F8hQIQzhU1wtts3o2V9DKNenEv375045w7J0q5q0Nvz0CGigID1 t5KJeoUKl2xFJPhoLblek0/Ng+iCIR7Z4Irx5muO7bcMThRkHXDbjoJ2RPIRguaTveuW qqCTHS7TbE+ghJxog/zW0hURB7tU36JSCblWt/U2b91CXT1GfOEniYDXfDvK2EK16GHx cQrECetE/q3CqFWXcFu1JaxsRBZ+jzbCnw58TFWToOLykAlvUJF++Plk4UqtjI8n5bA/ Kg8syhI4yuIpsm7mISKdRdcFsSD2rzcX2+oJDPz4EMIxFfq/SztEV9so8WURZgExR8nj rJIw== X-Gm-Message-State: AMCzsaW4uaU3851IfLCITVLj8OMnKrydwxDT6lGR3CfiDNT250bEafX/ E23TEMzI8k+KTiQtpXg4wz5d553ETw8= X-Google-Smtp-Source: AOwi7QBzrDCu1l8AG72/aExtDr+h5kLnRQmjizRYwhF1ZeWozp2dBwXwvesxQDXsQbhrjjQfgoOrcg== X-Received: by 10.25.143.156 with SMTP id s28mr2798698lfk.236.1507459790964; Sun, 08 Oct 2017 03:49:50 -0700 (PDT) From: Marcin Wojtas To: edk2-devel@lists.01.org Date: Sun, 8 Oct 2017 12:56:48 +0200 Message-Id: <1507460212-10323-2-git-send-email-mw@semihalf.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1507460212-10323-1-git-send-email-mw@semihalf.com> References: <1507460212-10323-1-git-send-email-mw@semihalf.com> Subject: [edk2] [platforms: PATCH v2 1/5] Marvell/Library: ComPhyLib: Remove PCD string parsing X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: jinghua@marvell.com, ard.biesheuvel@linaro.org, leif.lindholm@linaro.org, nadavh@marvell.com, neta@marvell.com, kostap@marvell.com MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" Simplify obtaining lane data, using arrays with direct enum values, rather than strings. This is another step to completely remove ParsePcdLib. This patch replaces string-based description of ComPhy lanes on Armada 70x0 DB with the enum values of type and speed - for that purpose new [Defines] section was added to Armada.dsc.inc file in order to increase readability. PortingGuide is updated accordingly. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas --- Platform/Marvell/Armada/Armada.dsc.inc | 44 +++++++++++++ Platform/Marvell/Armada/Armada70x0.dsc | 11 +++- Platform/Marvell/Library/ComPhyLib/ComPhyLib.c | 65 ++++--------------- Platform/Marvell/Library/ComPhyLib/ComPhyLib.h | 25 +++----- Platform/Marvell/Library/ComPhyLib/ComPhyLib.inf | 1 - Silicon/Marvell/Documentation/PortingGuide.txt | 67 +++++++++++++++----- 6 files changed, 124 insertions(+), 89 deletions(-) diff --git a/Platform/Marvell/Armada/Armada.dsc.inc b/Platform/Marvell/Arma= da/Armada.dsc.inc index 9549091..cd26506 100644 --- a/Platform/Marvell/Armada/Armada.dsc.inc +++ b/Platform/Marvell/Armada/Armada.dsc.inc @@ -479,3 +479,47 @@ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000 } + +##########################################################################= ###### +# +# Defines - platform description macros +# +##########################################################################= ###### +[Defines] + # ComPhy speed + DEFINE CP_1_25G =3D 0x1 + DEFINE CP_1_5G =3D 0x2 + DEFINE CP_2_5G =3D 0x3 + DEFINE CP_3G =3D 0x4 + DEFINE CP_3_125G =3D 0x5 + DEFINE CP_5G =3D 0x6 + DEFINE CP_5_15625G =3D 0x7 + DEFINE CP_6G =3D 0x8 + DEFINE CP_6_25G =3D 0x9 + DEFINE CP_10_3125G =3D 0xA + + # ComPhy type + DEFINE CP_UNCONNECTED =3D 0x0 + DEFINE CP_PCIE0 =3D 0x1 + DEFINE CP_PCIE1 =3D 0x2 + DEFINE CP_PCIE2 =3D 0x3 + DEFINE CP_PCIE3 =3D 0x4 + DEFINE CP_SATA0 =3D 0x5 + DEFINE CP_SATA1 =3D 0x6 + DEFINE CP_SATA2 =3D 0x7 + DEFINE CP_SATA3 =3D 0x8 + DEFINE CP_SGMII0 =3D 0x9 + DEFINE CP_SGMII1 =3D 0xA + DEFINE CP_SGMII2 =3D 0xB + DEFINE CP_SGMII3 =3D 0xC + DEFINE CP_QSGMII =3D 0xD + DEFINE CP_USB3_HOST0 =3D 0xE + DEFINE CP_USB3_HOST1 =3D 0xF + DEFINE CP_USB3_DEVICE =3D 0x10 + DEFINE CP_XAUI0 =3D 0x11 + DEFINE CP_XAUI1 =3D 0x12 + DEFINE CP_XAUI2 =3D 0x13 + DEFINE CP_XAUI3 =3D 0x14 + DEFINE CP_RXAUI0 =3D 0x15 + DEFINE CP_RXAUI1 =3D 0x16 + DEFINE CP_SFI =3D 0x17 diff --git a/Platform/Marvell/Armada/Armada70x0.dsc b/Platform/Marvell/Arma= da/Armada70x0.dsc index 467dfa3..dae9715 100644 --- a/Platform/Marvell/Armada/Armada70x0.dsc +++ b/Platform/Marvell/Armada/Armada70x0.dsc @@ -100,8 +100,15 @@ =20 #ComPhy gMarvellTokenSpaceGuid.PcdComPhyDevices|{ 0x1 } - gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes|L"SGMII1;USB3_HOST0;SFI;SATA1= ;USB3_HOST1;PCIE2" - gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|L"1250;5000;10310;5000;5000;= 5000" + # ComPhy0 + # 0: SGMII1 1.25 Gbps + # 1: USB3_HOST0 5 Gbps + # 2: SFI 10.31 Gbps + # 3: SATA1 5 Gbps + # 4: USB3_HOST1 5 Gbps + # 5: PCIE2 5 Gbps + gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes|{ $(CP_SGMII1), $(CP_USB3_HOS= T0), $(CP_SFI), $(CP_SATA1), $(CP_USB3_HOST1), $(CP_PCIE2) } + gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|{ $(CP_1_25G), $(CP_5G), $(C= P_10_3125G), $(CP_5G), $(CP_5G), $(CP_5G) } =20 #UtmiPhy gMarvellTokenSpaceGuid.PcdUtmiPhyCount|2 diff --git a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.c b/Platform/Marv= ell/Library/ComPhyLib/ComPhyLib.c index 3eb5d9f..bf21dca 100644 --- a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.c +++ b/Platform/Marvell/Library/ComPhyLib/ComPhyLib.c @@ -113,47 +113,6 @@ RegSetSilent16( MmioWrite16 (Addr, RegData); } =20 -/* This function returns enum with SerDesType */ -UINT32 -ParseSerdesTypeString ( - CHAR16* String - ) -{ - UINT32 i; - - if (String =3D=3D NULL) - return COMPHY_TYPE_INVALID; - - for (i =3D 0; i < COMPHY_TYPE_MAX; i++) { - if (StrCmp (String, TypeStringTable[i]) =3D=3D 0) { - return i; - } - } - - /* PCD string doesn't match any supported SerDes Type */ - return COMPHY_TYPE_INVALID; -} - -/* This function converts SerDes speed in MHz to enum with SerDesSpeed */ -UINT32 -ParseSerdesSpeed ( - UINT32 Value - ) -{ - UINT32 i; - UINT32 ValueTable [] =3D {0, 1250, 1500, 2500, 3000, 3125, - 5000, 5156, 6000, 6250, 10310}; - - for (i =3D 0; i < COMPHY_SPEED_MAX; i++) { - if (Value =3D=3D ValueTable[i]) { - return i; - } - } - - /* PCD SerDes speed value doesn't match any supported SerDes speed */ - return COMPHY_SPEED_INVALID; -} - CHAR16 * GetTypeString ( UINT32 Type @@ -182,7 +141,8 @@ GetSpeedString ( =20 VOID ComPhyPrint ( - IN CHIP_COMPHY_CONFIG *PtrChipCfg + IN CHIP_COMPHY_CONFIG *PtrChipCfg, + IN UINT8 Index ) { UINT32 Lane; @@ -191,7 +151,7 @@ ComPhyPrint ( for (Lane =3D 0; Lane < PtrChipCfg->LanesCount; Lane++) { SpeedStr =3D GetSpeedString(PtrChipCfg->MapData[Lane].Speed); TypeStr =3D GetTypeString(PtrChipCfg->MapData[Lane].Type); - DEBUG((DEBUG_ERROR, "Comphy-%d: %-13s %-10s\n", Lane, TypeStr, SpeedSt= r)); + DEBUG ((DEBUG_ERROR, "Comphy%d-%d: %-13s %-10s\n", Index, Lane, TypeSt= r, SpeedStr)); } =20 DEBUG((DEBUG_ERROR, "\n")); @@ -238,16 +198,16 @@ InitComPhyConfig ( */ switch (Id) { case 0: - GetComPhyPcd (ChipConfig, LaneData, 0); + GetComPhyPcd (LaneData, 0); break; case 1: - GetComPhyPcd (ChipConfig, LaneData, 1); + GetComPhyPcd (LaneData, 1); break; case 2: - GetComPhyPcd (ChipConfig, LaneData, 2); + GetComPhyPcd (LaneData, 2); break; case 3: - GetComPhyPcd (ChipConfig, LaneData, 3); + GetComPhyPcd (LaneData, 3); break; } } @@ -288,12 +248,9 @@ MvComPhyInit ( /* Get the count of the SerDes of the specific chip */ MaxComphyCount =3D PtrChipCfg->LanesCount; for (Lane =3D 0; Lane < MaxComphyCount; Lane++) { - /* Parse PCD with string indicating SerDes Type */ - PtrChipCfg->MapData[Lane].Type =3D - ParseSerdesTypeString (LaneData[Index].TypeStr[Lane]); - PtrChipCfg->MapData[Lane].Speed =3D - ParseSerdesSpeed (LaneData[Index].SpeedValue[Lane]); - PtrChipCfg->MapData[Lane].Invert =3D (UINT32)LaneData[Index].InvFlag= [Lane]; + PtrChipCfg->MapData[Lane].Type =3D LaneData[Index].Type[Lane]; + PtrChipCfg->MapData[Lane].Speed =3D LaneData[Index].SpeedValue[Lane]; + PtrChipCfg->MapData[Lane].Invert =3D LaneData[Index].InvFlag[Lane]; =20 if ((PtrChipCfg->MapData[Lane].Speed =3D=3D COMPHY_SPEED_INVALID) || (PtrChipCfg->MapData[Lane].Speed =3D=3D COMPHY_SPEED_ERROR) || @@ -311,7 +268,7 @@ MvComPhyInit ( return Status; } =20 - ComPhyPrint (PtrChipCfg); + ComPhyPrint (PtrChipCfg, Index); =20 /* PHY power UP sequence */ PtrChipCfg->Init (PtrChipCfg); diff --git a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.h b/Platform/Marv= ell/Library/ComPhyLib/ComPhyLib.h index 3898978..5899a4a 100644 --- a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.h +++ b/Platform/Marvell/Library/ComPhyLib/ComPhyLib.h @@ -43,7 +43,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMA= GE. #include #include #include -#include =20 #define MAX_LANE_OPTIONS 10 =20 @@ -52,14 +51,10 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DA= MAGE. #define GET_LANE_SPEED(id) PcdGetPtr(PcdChip##id##ComPhySpeeds) #define GET_LANE_INV(id) PcdGetPtr(PcdChip##id##ComPhyInvFlags) =20 -#define FillLaneMap(chip_struct, lane_struct, id) { \ - ParsePcdString((CHAR16 *) GET_LANE_TYPE(id), chip_struct[id].LanesCount,= NULL, lane_struct[id].TypeStr); \ - ParsePcdString((CHAR16 *) GET_LANE_SPEED(id), chip_struct[id].LanesCount= , lane_struct[id].SpeedValue, NULL); \ - ParsePcdString((CHAR16 *) GET_LANE_INV(id), chip_struct[id].LanesCount, = lane_struct[id].InvFlag, NULL); \ -} - -#define GetComPhyPcd(chip_struct, lane_struct, id) { \ - FillLaneMap(chip_struct, lane_struct, id); \ +#define GetComPhyPcd(lane_struct, id) { \ + lane_struct[id].Type =3D (UINT8 *)GET_LANE_TYPE(id); \ + lane_struct[id].SpeedValue =3D (UINT8 *)GET_LANE_SPEED(id); \ + lane_struct[id].InvFlag =3D (UINT8 *)GET_LANE_SPEED(id); \ } =20 /***** ComPhy *****/ @@ -573,15 +568,15 @@ typedef struct { } COMPHY_MUX_DATA; =20 typedef struct { - UINT32 Type; - UINT32 Speed; - UINT32 Invert; + UINT8 Type; + UINT8 Speed; + UINT8 Invert; } COMPHY_MAP; =20 typedef struct { - CHAR16 *TypeStr[MAX_LANE_OPTIONS]; - UINTN SpeedValue[MAX_LANE_OPTIONS]; - UINTN InvFlag[MAX_LANE_OPTIONS]; + UINT8 *Type; + UINT8 *SpeedValue; + UINT8 *InvFlag; } PCD_LANE_MAP; =20 typedef diff --git a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.inf b/Platform/Ma= rvell/Library/ComPhyLib/ComPhyLib.inf index e0f4634..c223fe5 100644 --- a/Platform/Marvell/Library/ComPhyLib/ComPhyLib.inf +++ b/Platform/Marvell/Library/ComPhyLib/ComPhyLib.inf @@ -51,7 +51,6 @@ MemoryAllocationLib PcdLib IoLib - ParsePcdLib =20 [Sources.common] ComPhyLib.c diff --git a/Silicon/Marvell/Documentation/PortingGuide.txt b/Silicon/Marve= ll/Documentation/PortingGuide.txt index 83ebe9d..25cb66b 100644 --- a/Silicon/Marvell/Documentation/PortingGuide.txt +++ b/Silicon/Marvell/Documentation/PortingGuide.txt @@ -57,35 +57,68 @@ Every ComPhy PCD has part where stands for = chip ID (order is not important, but configuration will be set for first PcdComPhyChipCount chip= s). =20 Every chip has 3 ComPhy PCDs and three of them comprise per-board lanes -settings for this chip. Their format is unicode string, containing settings -for up to 10 lanes. Setting for each one is separated with semicolon. -These PCDs together describe outputs of PHY integrated in simple cihp. -Below is example for the first chip (Chip0). +settings for this chip. Their format is array of up to 10 values reflecting +defined numbers for SPEED/TYPE/INVERT, whose description can be found in: =20 - - gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes - (Unicode string indicating PHY types. Currently supported are: + OpenPlatformPkg/Platforms/Marvell/Library/ComPhyLib/ComPhyLib.h =20 - { L"unconnected", L"PCIE0", L"PCIE1", L"PCIE2", L"PCIE3", - L"SATA0", L"SATA1", L"SATA2", L"SATA3", L"SGMII0", - L"SGMII1", L"SGMII2", L"SGMII3", L"QSGMII", - L"USB3_HOST0", L"USB3_HOST1", L"USB3_DEVICE", - L"XAUI0", L"XAUI1", L"XAUI2", L"XAUI3", L"RXAUI0", - L"RXAUI1", L"KR" } ) + - gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes + (Array of types - currently supported are: + + CP_UNCONNECTED 0x0 + CP_PCIE0 0x1 + CP_PCIE1 0x2 + CP_PCIE2 0x3 + CP_PCIE3 0x4 + CP_SATA0 0x5 + CP_SATA1 0x6 + CP_SATA2 0x7 + CP_SATA3 0x8 + CP_SGMII0 0x9 + CP_SGMII1 0xA + CP_SGMII2 0xB + CP_SGMII3 0xC + CP_QSGMII 0xD + CP_USB3_HOST0 0xE + CP_USB3_HOST1 0xF + CP_USB3_DEVICE 0x10 + CP_XAUI0 0x11 + CP_XAUI1 0x12 + CP_XAUI2 0x13 + CP_XAUI3 0x14 + CP_RXAUI0 0x15 + CP_RXAUI1 0x16 + CP_SFI 0x17 ) =20 - gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds - (Indicates PHY speeds in MHz. Currently supported are: - { 1250, 1500, 2500, 3000, 3125, 5000, 6000, 6250, 1031 } ) + (Array of speeds - currently supported are: + + CP_1_25G 0x1 + CP_1_5G 0x2 + CP_2_5G 0x3 + CP_3G 0x4 + CP_3_125G 0x5 + CP_5G 0x6 + CP_5_15625G 0x7 + CP_6G 0x8 + CP_6_25G 0x9 + CP_10_3125G 0xA ) =20 - gMarvellTokenSpaceGuid.PcdChip0ComPhyInvFlags - (Indicates lane polarity invert) + (Array of lane inversion types - currently supported are: + + CP_NO_INVERT 0x0 + CP_TXD_INVERT 0x1 + CP_RXD_INVERT 0x2 + CP_ALL_INVERT 0x3 ) =20 Example ------- =20 #ComPhy gMarvellTokenSpaceGuid.PcdComPhyDevices|{ 0x1 } - gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes|L"SGMII1;USB3_HOST0;SFI;SAT= A1;USB3_HOST1;PCIE2" - gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|L"1250;5000;10310;5000;500= 0;5000" + gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes|{ $(CP_SGMII1), $(CP_USB3_H= OST0), $(CP_SFI), $(CP_SATA1), $(CP_USB3_HOST1), $(CP_PCIE2) } + gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|{ $(CP_1_25G), $(CP_5G), $= (CP_10_3125G), $(CP_5G), $(CP_5G), $(CP_5G) } =20 =20 PHY Driver configuration --=20 1.8.3.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel