On Thu, Oct 26, 2017 at 03:19:31AM +0200, Marcin Wojtas wrote:
> From: Joe Zhou <shjzhou@marvell.com>
>
> After enabling dynamic PCDs, it is possible to reconfigure
> MPP during platform initialization. It occurred that due to
> a faulty way of passing temporary values, information obtained
> from PCDs was overwritten. This patch fixes the issue, which
> on the occasion simplifies PcdToMppRegs function.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Joe Zhou <shjzhou@marvell.com>
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Platform/Marvell/Library/MppLib/MppLib.c | 21 ++++++++------------
> 1 file changed, 8 insertions(+), 13 deletions(-)
>
> diff --git a/Platform/Marvell/Library/MppLib/MppLib.c b/Platform/Marvell/Library/MppLib/MppLib.c
> index c09acf9..383c820 100644
> --- a/Platform/Marvell/Library/MppLib/MppLib.c
> +++ b/Platform/Marvell/Library/MppLib/MppLib.c
> @@ -74,7 +74,7 @@ STATIC
> VOID
> SetRegisterValue (
> UINT8 RegCount,
> - UINT8 **MppRegPcd,
> + UINT8 MppRegPcd[][MPP_PINS_PER_REG],
> UINTN BaseAddr,
> BOOLEAN ReverseFlag
> )
> @@ -99,10 +99,10 @@ STATIC
> UINT8
> PcdToMppRegs (
> UINTN PinCount,
> - UINT8 **MppRegPcd
> + UINT8 **MppRegPcd,
> + UINT8 MppRegPcdTmp[][MPP_PINS_PER_REG]
> )
> {
> - UINT8 MppRegPcdTmp[MPP_MAX_REGS][MPP_PINS_PER_REG];
> UINT8 PcdGroupCount, MppRegCount;
> UINTN i, j, k, l;
>
> @@ -125,14 +125,7 @@ PcdToMppRegs (
> for (j = 0; j < PCD_PINS_PER_GROUP; j++) {
> k = (PCD_PINS_PER_GROUP * i + j) / MPP_PINS_PER_REG;
> l = (PCD_PINS_PER_GROUP * i + j) % MPP_PINS_PER_REG;
> - MppRegPcdTmp[k][l] = MppRegPcd[i][j];
> - }
> - }
> -
> - /* Update input table */
> - for (i = 0; i < MppRegCount; i++) {
> - for (j = 0; j < MPP_PINS_PER_REG; j++) {
> - MppRegPcd[i][j] = MppRegPcdTmp[i][j];
> + MppRegPcdTmp[k][l] = (UINT8)MppRegPcd[i][j];
> }
> }
>
> @@ -191,6 +184,7 @@ MppInitialize (
> BOOLEAN ReverseFlag[MAX_CHIPS];
> UINT8 *MppRegPcd[MAX_CHIPS][MPP_MAX_REGS];
> UINT32 i, ChipCount;
> + UINT8 TmpMppValue[MPP_MAX_REGS][MPP_PINS_PER_REG];
>
> ChipCount = PcdGet32 (PcdMppChipCount);
>
> @@ -203,8 +197,9 @@ MppInitialize (
> for (i = 0; i < MAX_CHIPS; i++) {
> if (i == ChipCount)
> break;
> - RegCount = PcdToMppRegs (PinCount[i], MppRegPcd[i]);
> - SetRegisterValue (RegCount, MppRegPcd[i], BaseAddr[i], ReverseFlag[i]);
> +
> + RegCount = PcdToMppRegs (PinCount[i], MppRegPcd[i], TmpMppValue);
> + SetRegisterValue (RegCount, TmpMppValue, BaseAddr[i], ReverseFlag[i]);
>
> /*
> * eMMC PHY IP has its own MPP configuration.
> --
> 2.7.4
>
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel