MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 2 +- MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 13 ++++++------- 2 files changed, 7 insertions(+), 8 deletions(-)
This patch is following 2c656af04d7f.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 2 +-
MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 13 ++++++-------
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
index 279407475b66..715a5ab1c142 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
@@ -99,7 +99,7 @@ struct _PEI_USB2_HC_DEV {
EDKII_IOMMU_PPI *IoMmu;
EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
//
- // EndOfPei callback is used to stop the XHC DMA operation
+ // EndOfPei callback is used to stop the EHC DMA operation
// after exit PEI phase.
//
EFI_PEI_NOTIFY_DESCRIPTOR EndOfPeiNotifyList;
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
index 3dadcd60b6fe..baacf5d56080 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
@@ -576,7 +576,12 @@ EhcCreateUrb (
if (Urb->Qh == NULL) {
goto ON_ERROR;
}
-
+
+ Urb->RequestPhy = NULL;
+ Urb->RequestMap = NULL;
+ Urb->DataPhy = NULL;
+ Urb->DataMap = NULL;
+
//
// Map the request and user data
//
@@ -591,9 +596,6 @@ EhcCreateUrb (
Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
Urb->RequestMap = Map;
- } else {
- Urb->RequestPhy = NULL;
- Urb->RequestMap = NULL;
}
if (Data != NULL) {
@@ -613,9 +615,6 @@ EhcCreateUrb (
Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
Urb->DataMap = Map;
- } else {
- Urb->DataPhy = NULL;
- Urb->DataMap = NULL;
}
Status = EhcCreateQtds (Ehc, Urb);
--
2.7.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
Reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: Zeng, Star
> Sent: Tuesday, November 21, 2017 5:04 PM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>
> Subject: [PATCH] MdeModulePkg EhciPei: Minor refinement about IOMMU
>
> This patch is following 2c656af04d7f.
> 1. Fix typo "XHC" to "EHC".
> 2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
> in Urb, otherwise the last time value of them may
> be used in error handling when error happens.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Star Zeng <star.zeng@intel.com>
> ---
> MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 2 +-
> MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 13 ++++++-------
> 2 files changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> index 279407475b66..715a5ab1c142 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
> @@ -99,7 +99,7 @@ struct _PEI_USB2_HC_DEV {
> EDKII_IOMMU_PPI *IoMmu;
> EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
> //
> - // EndOfPei callback is used to stop the XHC DMA operation
> + // EndOfPei callback is used to stop the EHC DMA operation
> // after exit PEI phase.
> //
> EFI_PEI_NOTIFY_DESCRIPTOR EndOfPeiNotifyList;
> diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> index 3dadcd60b6fe..baacf5d56080 100644
> --- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
> @@ -576,7 +576,12 @@ EhcCreateUrb (
> if (Urb->Qh == NULL) {
> goto ON_ERROR;
> }
> -
> +
> + Urb->RequestPhy = NULL;
> + Urb->RequestMap = NULL;
> + Urb->DataPhy = NULL;
> + Urb->DataMap = NULL;
> +
> //
> // Map the request and user data
> //
> @@ -591,9 +596,6 @@ EhcCreateUrb (
>
> Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
> Urb->RequestMap = Map;
> - } else {
> - Urb->RequestPhy = NULL;
> - Urb->RequestMap = NULL;
> }
>
> if (Data != NULL) {
> @@ -613,9 +615,6 @@ EhcCreateUrb (
>
> Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
> Urb->DataMap = Map;
> - } else {
> - Urb->DataPhy = NULL;
> - Urb->DataMap = NULL;
> }
>
> Status = EhcCreateQtds (Ehc, Urb);
> --
> 2.7.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2025 Red Hat, Inc.