Edk2Setup.bat | 541 ---------------------------------------------------------- 1 file changed, 541 deletions(-) delete mode 100755 Edk2Setup.bat
Edk2Setup.bat is out of maintain. It is a draft version batch file, and not
implement all features listed in its header file. To avoid the confuse,
drop it from edk2 project, and keep edksetup.bat only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
---
Edk2Setup.bat | 541 ----------------------------------------------------------
1 file changed, 541 deletions(-)
delete mode 100755 Edk2Setup.bat
diff --git a/Edk2Setup.bat b/Edk2Setup.bat
deleted file mode 100755
index 017e88d..0000000
--- a/Edk2Setup.bat
+++ /dev/null
@@ -1,541 +0,0 @@
-@REM @file
-@REM Windows batch file, Edk2Setup.bat, to set up an EDK II build environment
-@REM
-@REM This script will be renamed to edksetup.bat after initial testing and
-@REM acceptance by the open source community.
-@REM
-@REM This script will set the following system environment variables:
-@REM WORKSPACE, EDK_TOOLS_PATH, PATH
-@REM If rebuilding the tools:
-@REM BASE_TOOLS_PATH, PYTHON_FREEZER_PATH, PYTHONPATH
-@REM It will also create a Conf/target.txt, tools_def.txt and build_rule.txt files
-@REM if they do not exist
-@REM If the reset flag is set, all environment variables will be reset and
-@REM the Conf/target.txt, tools_def.txt and build_rule.txt files will be overwritten
-@REM
-@REM Three other scripts, located in the BaseTools\Scripts directory, may be called
-@REM by this script.
-@REM SetVisualStudio.bat - will set the Visual Studio environment based on the --vs* flags
-@REM it is also used to build the Win32 binaries, calling nmake
-@REM using the WORKSPACE\BaseTools\Makefile
-@REM ShowEnvironment.bat - will display the current EDK II Build environment
-@REM UpdateBuildVersions.py - script is called prior to building the EDK II BaseTools from
-@REM Sources. This tool will modify the BuildVersion.* files so that
-@REM when the tools get built, they will have a custom version entry
-@REM similar to the following:
-@REM e:\edk2>build --version
-@REM build.exe Version 0.51 Developer Build based on Revision: 15668
-@REM
-@REM Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
-@REM (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
-@REM This program and the accompanying materials
-@REM are licensed and made available under the terms and conditions of the BSD License
-@REM which accompanies this distribution. The full text of the license may be found at
-@REM http://opensource.org/licenses/bsd-license.php
-@REM
-@REM THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-@REM WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-@REM
-@REM
-@REM usage:
-@REM Edk2Setup.bat [--help | -h] [-v | --version] [-r | --reset]
-@REM [--reconfig] [--edk-tools-path DirName]
-@REM [--pull [Directory]| --rebuild [Directory]]
-@REM [--nt32 [X64]]
-
-@REM ##############################################################
-@REM # You should not have to modify anything below this line
-@REM #
-@echo off
-@set SCRIPT_NAME=%0
-@set SCRIPT_VERSION=0.9.2.
-@set SVN_REVISION=$Revision$
-@set RESET_ENVIRONMENT=FALSE
-@set NT32PKG=FALSE
-@set NT32_X64=
-@set BUILD_TOOLS_WITH=
-@set LOCATION=
-@set REBUILD_TOOLS=
-@set SVN_PULL=
-@set SRC_CONF=
-@set ARGUMENT=
-@set SCRIPT=EDKSETUP_BAT
-@set PYTHON_BUILD=
-
-@if not defined ORIGINAL_PATH set "ORIGINAL_PATH=%PATH%"
-@REM Always set the WORKSPACE environment variable to the current directory
-@if not defined WORKSPACE (
- @set "WORKSPACE=%CD%"
-)
-@if not exist "%BASE_TOOLS_PATH%" (
- @if exist "%WORKSPACE%\BaseTools" (
- set "BASE_TOOLS_PATH=%WORKSPACE%\BaseTools"
- ) else (
- @if defined PACKAGES_PATH (
- @for %%i IN (%PACKAGES_PATH%) DO (
- @if exist %%~fi\BaseTools (
- @set BASE_TOOLS_PATH=%%~fi\BaseTools
- @goto checkBaseTools
- )
- )
- )
- )
-)
-:checkBaseTools
-@if not defined BASE_TOOLS_PATH (
- @echo.
- @echo !!! ERROR !!! The BaseTools Package was not found !!!
- @echo.
- @goto ExitFailure
-)
-@if not exist "%WORKSPACE%\Conf" @mkdir "%WORKSPACE%\Conf"
-
-@@if not defined EDK_TOOLS_PATH @set "EDK_TOOLS_PATH=%BASE_TOOLS_PATH%"
-
-@REM Keep the existing EDK_TOOLS_PATH value, the --reset flag will set it
-@REM back to WORKSPACE\BaseTools while the --location DIRECTORY flag will
-@REM still take precedence if the location option follows the reset option
-@REM on the command line.
-@if defined EDK_TOOLS_PATH @set "LOCATION=%EDK_TOOLS_PATH%"
-
-:parse_cmd_line
-@if "%1"=="" @goto MainRoutine
-@if /I "%1"=="-h" @goto Usage
-@if /I "%1"=="--help" @goto Usage
-@if /I "%1"=="/?" @goto Usage
-@if /I "%1"=="--version" @goto Version
-
-@REM These options will reset the system environment
-@if /I "%1"=="-r" (
- @setlocal EnableDelayedExpansion
- @set "WORKSPACE=%CD%"
- @set "EDK_TOOLS_PATH=%CD%\BaseTools"
- @set "LOCATION=!EDK_TOOLS_PATH!"
- @endlocal
- @shift
- @goto parse_cmd_line
-)
-@if /I "%1"=="--reset" (
- @set "WORKSPACE=%CD%"
- @set "EDK_TOOLS_PATH=%WORKSPACE%\BaseTools"
- @set "LOCATION=%WORKSPACE%\BaseTools"
- @shift
- @goto parse_cmd_line
-)
-
-@REM This option is used to overwrite the Conf/*.txt files with the
-@REM WORKSPACE\BaseTools\Conf\*.template files.
-@if /I "%1"=="--reconfig" (
- @set RECONFIG=TRUE
- @shift
- @goto parse_cmd_line
-)
-
-@REM This option can be used to set the EDK_TOOLS_PATH containing the Win32 binaries to an
-@REM alternate directory
-@if /I "%1"=="--edk-tools-path" (
- @setlocal EnableDelayedExpansion
- @set ARGUMENT=%2
- @if "!ARGUMENT:~0,2!"=="--" (
- @echo.
- @echo ERROR : The --edk-tools-path flag requires an argument
- @echo.
- @endlocal
- @goto Usage
- )
- @endlocal
- @set "LOCATION=%WORKSPACE%\%2"
- @shift
- @shift
- @goto parse_cmd_line
-)
-
-@REM Force pulling updated (or checkout if they do not exist) from SVN for the BaseTools\Bin\Win32 directory
-@REM or the directory pointed to by the --location option
-@if /I "%1"=="--pull" (
- @if "%REBUILD_TOOLS%"=="TRUE" (
- @echo.
- @echo ERROR: The --pull option may not be used with the --rebuild option
- @shift
- @goto ExitFailure
- )
- @set SVN_PULL=TRUE
- @setlocal EnableDelayedExpansion
- @set ARGUMENT=%2
- @if not "!ARGUMENT:~0,2!"=="--" (
- @endlocal
- @set "LOCATION=%2"
- @shift
- )
- @shift
- @goto parse_cmd_line
-)
-
-@REM This options forces rebuilding the tools (provided the required tools are available
-@if /I "%1"=="--rebuild" (
- @if "%SVN_PULL%"=="TRUE" (
- @echo.
- @echo ERROR: The --reset option may not be used with the --pull option
- @shift
- @goto ExitFailure
- )
- @set REBUILD_TOOLS=TRUE
- @setlocal EnableDelayedExpansion
- @set ARGUMENT=%2
- @if not "!ARGUMENT:~0,2!"=="--" (
- @endlocal
- @set "LOCATION=%2"
- @shift
- )
- @shift
- goto parse_cmd_line
-)
-
-@REM This option will try to set the compiler environment for building Nt32Pkg/Nt32Pkg.dsc
-@REM If the compiler environment is already installed, then no additional work is required.
-@if /I "%1"=="--nt32" (
- @set NT32PKG=TRUE
- @if not defined BUILD_TOOLS_WITH (
- @set BUILD_TOOLS_WITH=Latest
- )
- @REM This option will try to set the environment for building the Nt32Pkg/Nt32Pkg; on a 64-bit
- @REM Windows OS
- @if /I "%2"=="X64" (
- @set NT32_X64=TRUE
- @shift
- )
- @shift
- @goto parse_cmd_line
-)
-
-@if not "%1"=="" goto UnknownOptionOrArgument
-@goto MainRoutine
-
-:Usage
-@echo Usage: %SCRIPT_NAME% [Options]
-@echo Copyright(c) 2014, Intel Corporation. All rights reserved.
-@echo.
-@echo The system environment variable, WORKSPACE, is always set to the current
-@echo working directory.
-@echo.
-@echo Options:
-@echo --help, -h Print this help screen and exit.
-@echo.
-@echo --version Print this script's version and exit.
-@echo.
-@echo --reset, -r Reset the EDK_TOOLS_PATH and PATH system environment
-@echo variables. The EDK_TOOLS_PATH default is
-@echo WORKSPACE\BaseTools, however, it may be overridden by
-@echo arguments given to the --edk-tools-path, --pull and/or
-@echo --rebuild options.
-@echo Once set, the EDK_TOOLS_PATH environment variable reset
-@echo by opening up a new command prompt window or through one
-@echo of the options provided by this tool
-@echo.
-@echo --reconfig Overwrite the WORKSPACE/Conf/*.txt files with the
-@echo template files from the BaseTools/Conf directory.
-@echo.
-@echo --edk-tools-path DIRECTORY
-@echo This option sets the EDK_TOOLS_PATH to the DIRECTORY
-@echo value instead of the default (WORKSPACE\BaseTools).
-@echo.
-@echo --nt32 [X64] If a compiler tool chain is not available in the
-@echo environment, call a script to attempt to set one up.
-@echo This flag is only required if building the
-@echo Nt32Pkg/Nt32Pkg.dsc system emulator.
-@echo If the X64 argument is set, and a compiler tool chain is
-@echo not available, attempt to set up a tool chain that will
-@echo create X64 binaries. Setting these two options have the
-@echo potential side effect of changing tool chains used for a
-@echo rebuild.
-@echo.
-@pause
-@echo.
-@echo --pull [DIRECTORY] Get the EDK II BaseTools binaries from source control
-@echo (must not be used with --rebuild).
-@echo If the optional DIRECTORY argument is specified, the tool
-@echo sets EDK_TOOLS_PATH to DIRECTORY.
-@echo If the DIRECTORY argument is not specified, the tools are
-@echo placed in the directory tree pointed to by the current
-@echo EDK_TOOLS_PATH environment variable. If the binaries
-@echo cannot be obtained from source control, the
-@echo EDK_TOOLS_PATH will be set to the default,
-@echo WORKSPACE\BaseTools directory.
-@echo.
-@echo --rebuild [DIRECTORY]
-@echo Force Rebuilding the EDK II BaseTools from source
-@echo (must not be used with --pull).
-@echo NOTE: The build will use whatever compiler tool set
-@echo is available in the environment prior to
-@echo running edksetup.bat.
-@echo If the optional DIRECTORY argument is specified, the tool
-@echo sets EDK_TOOLS_PATH to DIRECTORY. Tools binaries will be
-@echo placed in the appropriate subdirectory in the
-@echo EDK_TOOLS_PATH directory. If the build fails, the
-@echo EDK_TOOLS_PATH will be set to the default,
-@echo WORKSPACE\BaseTools directory.
-@goto ExitSuccess
-
-:Version
-@echo %SCRIPT_NAME% Version: %SCRIPT_VERSION%%SVN_REVISION:~11,-1%
-@echo Copyright(c) 2014, Intel Corporation. All rights reserved.
-@set HIDE_PATH=TRUE
-@call "%BASE_TOOLS_PATH%\Scripts\ShowEnvironment.bat"
-@set HIDE_PATH=
-@goto ExitSuccess
-
-:UnknownOptionOrArgument
-@echo. ERROR : This argument is not valid: %1
-@echo.
-@goto ExitFailure
-
-:NoVisualStudio
-@echo ERROR : Unable to determine if a compiler tool chain has been enabled in this
-@echo command-prompt window. Rebuilding of the tools with this script is not
-@echo possible.
-@echo Refer to the BaseTools\BuildNotes.txt for directions for building
-@echo the BaseTools binaries.
-@echo.
-@goto ExitFailure
-
-:NoPython
-@echo ERROR : Unable to rebuild the BaseTools binaries, python does not appear to be
-@echo installed. If python is installed, please set the environment
-@echo variable, PYTHONHOME to the Path to the python.exe, for example,
-@echo if python.exe is located in the C:\Python27 directory, then:
-@echo set PYTHONHOME=C:\Python27
-@echo.
-@goto ExitFailure
-
-:BadPython
-@echo ERROR : Unable to rebuild the BaseTools binaries, python does not appear to be
-@echo installed.
-@echo The python executable was not found in the PYTHONHOME: %PYTHONHOME%
-@echo If python is installed, please set the environment variable, PYTHONHOME
-@echo to the Path that contains python.exe, for example, if python.exe is
-@echo located in the C:\Python27 directory, then:
-@echo set PYTHONHOME=C:\Python27
-@echo.
-@goto ExitFailure
-
-:NoCxFreeze
-@echo ERROR : Unable to locate cx_Freeze 4.2.3. The cxfreeze.bat file must be located
-@echo in the %PYTHONHOME%\Scripts directoryin order to rebuild the BaseTools
-@echo binaries.
-@echo.
-@goto ExitFailure
-
-:NoBaseTools
-@echo ERROR: Unable to locate the BaseTools directory containing the Source tree
-@echo.
-@goto ExitFailure
-
-@REM #########################################################################################
-@REM MAIN ROUTINE
-@REM Set up the Build System environment
-@REM #########################################################################################
-:MainRoutine
-@if defined LOCATION @set "EDK_TOOLS_PATH=%LOCATION%"
-@REM SET the EDK_TOOLS_PATH.
-@if not exist "%EDK_TOOLS_PATH%" (
- @mkdir %EDK_TOOLS_PATH%
-)
-@if not defined NASM_PREFIX (
- @echo.
- @echo WARNING : NASM_PREFIX environment variable is not set
- @if exist "C:\nasm\nasm.exe" @set "NASM_PREFIX=C:\nasm\"
- @if exist "C:\nasm\nasm.exe" @echo Found nasm.exe, setting the environment variable to C:\nasm\
- @if not exist "C:\nasm\nasm.exe" echo Attempting to build modules that require NASM will fail.
-)
-@REM Set up the path to include the EDK_TOOLS_PATH\Bin\Win32 directory; this test determines
-@REM whether the path is in the workspace or a fully qualified path that may be outside of
-@REM the workspace
-@if exist "%WORKSPACE%\%EDK_TOOLS_PATH%" @set "EDK_TOOLS_PATH=%WORKSPACE%\%EDK_TOOLS_PATH%"
-
-@if defined REBUILD_TOOLS goto SetConf
-@if defined SVN_PULL goto SetConf
-
-@REM call set_vsprefix_envs.bat to set up the PREFIX env for VS tool path.
-@IF NOT exist "%EDK_TOOLS_PATH%\set_vsprefix_envs.bat" (
- @echo.
- @echo !!! ERROR !!! The set_vsprefix_envs.bat was not found !!!
- @echo.
- @goto ExitFailure
-)
-@call %EDK_TOOLS_PATH%\set_vsprefix_envs.bat
-
-@echo.
-@echo Rebuilding of the tools is not required. Binaries of the latest,
-@echo tested versions of the tools have been tested and included in the
-@echo EDK II repository.
-@echo.
-@echo If you really want to build the tools, use the --rebuild option.
-@echo.
-@if not defined CYGWIN_HOME @echo "!!! WARNING !!! No CYGWIN_HOME set, gcc build may not be used !!!"
-@if not defined CYGWIN_HOME @echo.
-@REM Make sure the WORKSPACE\Conf directory contains the required text files that will be
-@REM copied or replaced from the WORKSPACE\BaseTools\Conf directories' template files.
-:SetConf
-@if not exist "%EDK_TOOLS_PATH%\Conf" (
- @if exist "%BASE_TOOLS_PATH%\Conf" (
- @set "SRC_CONF=%BASE_TOOLS_PATH%\Conf"
- )
-) else (
- @set "SRC_CONF=%EDK_TOOLS_PATH%\Conf"
-)
-@if not defined SRC_CONF (
- @echo ERROR : Unable to locate the BaseTools directory tree
- @goto ExitFailure
-)
-
-@REM The script will test to see if the files exist, and also use the RESET_ENVIRONMENT flag
-@REM to overwrite the WORKSPACE\Conf *.txt files.
-@call "%BASE_TOOLS_PATH%\Scripts\ShowEnvironment.bat"
-@if errorlevel 1 (
- @echo Unable to copy the template files from "%SRC_CONF%" to "%WORKSPACE%\Conf"
- @goto ExitFailure
-)
-@set SRC_CONF=
-
-@REM Set up Visual Studio if required to build the Nt32Pkg/Nt32Pkg.dsc emulator
-@if "%NT32PKG%"=="TRUE" (
- @if not defined VSINSTALLDIR @set "PATH=%ORIGINAL_PATH%"
- @if not defined NT32_X64 @call "%BASE_TOOLS_PATH%\get_vsvars.bat"
- @if defined NT32_X64 call "%BASE_TOOLS_PATH%\Scripts\SetVisualStudio.bat"
-)
-@if "%NT32PKG%"=="TRUE" (
- @if not defined VS_PATH set "VS_PATH=%PATH%"
-)
-@if defined VS_PATH @set "PATH=%VS_PATH%"
-@if not defined VS_PATH @set "PATH=%ORIGINAL_PATH%"
-@if not defined EDK_TOOLS_BIN (
- @if exist %EDK_TOOLS_PATH%\Bin\Win32 (
- @set EDK_TOOLS_BIN=%EDK_TOOLS_PATH%\Bin\Win32
- ) else (
- @echo.
- @echo !!! ERROR !!! Cannot find BaseTools Bin Win32!!!
- @echo Please check the directory %EDK_TOOLS_PATH%\Bin\Win32
- @echo Or configure EDK_TOOLS_BIN env to point Win32 directory.
- @echo.
- @goto ExitFailure
- )
-)
-@set "PATH=%EDK_TOOLS_BIN%;%PATH%"
-
-@if NOT EXIST "%EDK_TOOLS_BIN%\build.exe" @set PYTHON_BUILD=TRUE
-@if NOT EXIST "%EDK_TOOLS_BIN%\GenFds.exe" @set PYTHON_BUILD=TRUE
-@if NOT EXIST "%EDK_TOOLS_BIN%\TargetTool.exe" @set PYTHON_BUILD=TRUE
-@if NOT EXIST "%EDK_TOOLS_BIN%\Trim.exe" @set PYTHON_BUILD=TRUE
-
-@if not defined PYTHON_BUILD goto SvnPull
-
-@echo !!! WARNING !!! Setup environment to run Python scripts directly.
-
-@if not defined PYTHON_HOME (
- @if defined PYTHONHOME (
- @set PYTHON_HOME=%PYTHONHOME%
- ) else (
- @echo.
- @echo !!! ERROR !!! PYTHON_HOME is required to build or execute the tools, please set it. !!!
- @echo.
- @goto ExitFailure
- )
-)
-
-@set PATH=%PATH%;%BASE_TOOLS_PATH%\BinWrappers\WindowsLike
-@set BASETOOLS_PYTHON_SOURCE=%BASE_TOOLS_PATH%\Source\Python
-@set PYTHONPATH=%BASETOOLS_PYTHON_SOURCE%;%PYTHONPATH%
-
-:SvnPull
-@if "%REBUILD_TOOLS%"=="TRUE" @goto Rebuild
-@if "%SVN_PULL%"== "TRUE" (
- if defined PYTHONHOME (
- @REM Use the python script if possible to test is the svn command is available, if it fails, the user may be
- @REM able to rebuild the Win32 binaries
- @call "%BASE_TOOLS_PATH%\Scripts\UpdateBuildVersions.py" --svn-test -v
- @if errorlevel 1 (
- @echo ERROR : The command-line svn tool is not available and the Win32 binaries do not exist
- @echo Please re-run this script again with the --rebuild option to attempt to build
- @echo the binaries
- @echo.
- @goto ExitFailure
- )
- @if exist %EDK_TOOLS_PATH%\Bin\Win32 @rmdir /S /Q %EDK_TOOLS_PATH%\Bin\Win32
- @call svn co https://svn.code.sf.net/p/edk2-toolbinaries/code/trunk/Win32 "%EDK_TOOLS_PATH%\Bin\Win32"
- ) else (
- @call svn co https://svn.code.sf.net/p/edk2-toolbinaries/code/trunk/Win32 "%EDK_TOOLS_PATH%\Bin\Win32"
- @if errorlevel 1 (
- @echo ERROR : The command-line svn tool is not available and the Win32 binaries do not exist
- @echo Python does not appear to be available either. This script cannot be used to
- @echo build the Win32 binaries or to obtain them from this repository:
- @echo https://svn.code.sf.net/p/edk2-toolbinaries/code/trunk/Win32
- @goto ExitFailure
- )
- )
- @goto ShowAndExit
-)
-
-@if not "%REBUILD_TOOLS%"=="TRUE" @goto ShowAndExit
-
-@REM The following code is used to rebuild the Win32 BaseTools binaries - check that required tools are available
-:Rebuild
-@if not exist "%BASE_TOOLS_PATH%\Source" @goto NoBaseTools
-@endlocal
-@if not defined VCINSTALLDIR @goto NoVisualStudio
-@if not defined PYTHONHOME @goto NoPython
-@if not exist "%PYTHONHOME%\python.exe" @goto BadPython
-@REM python.exe has been located, now make sure it's in the PATH
-@call python --version > nul 2>&1
-@if errorlevel 1 @set "PATH=%PYTHONHOME%\python.exe;%PATH%"
-@if not defined PYTHON_FREEZER_PATH (
- @if not exist "%PYTHONHOME%\Scripts\cxfreeze.bat" @goto NoCxFreeze
- @set "PYTHON_FREEZER_PATH=%PYTHONHOME%\Scripts"
-)
-@call "%BASE_TOOLS_PATH%\Scripts\SetVisualStudio.bat"
-@if errorlevel 1 @goto ExitFailure
-
-:ShowAndExit
-@call "%BASE_TOOLS_PATH%\Scripts\ShowEnvironment.bat"
-
-@REM #########################################################################################
-@REM EXIT ROUTINES
-@REM #########################################################################################
-:ExitSuccess
-@set SCRIPT_NAME=
-@set SCRIPT_VERSION=
-@set SVN_REVISION=
-@set RESET_ENVIRONMENT=
-@set RECONFIG=
-@set NT32PKG=
-@set BUILD_TOOLS_WITH=
-@set LOCATION=
-@set REBUILD_TOOLS=
-@set SVN_PULL=
-@set SRC_CONF=
-@set ARGUMENT=
-@set SCRIPT=
-@set LIST_VS_VERSIONS=
-@set PYTHON_FREEZER_PATH=
-@set PYTHON_BUILD=
-@echo on
-@exit /B 0
-
-:ExitFailure
-@set SCRIPT_NAME=
-@set SCRIPT_VERSION=
-@set SVN_REVISION=
-@set RESET_ENVIRONMENT=
-@set RECONFIG=
-@set NT32PKG=
-@set BUILD_TOOLS_WITH=
-@set LOCATION=
-@set REBUILD_TOOLS=
-@set SVN_PULL=
-@set SRC_CONF=
-@set ARGUMENT=
-@set SCRIPT=
-@set LIST_VS_VERSIONS=
-@set PYTHON_FREEZER_PATH=
-@set PYTHON_BUILD=
-@echo on
-@exit /B 1
--
2.8.0.windows.1
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
On 01/11/18 09:21, Liming Gao wrote: > Edk2Setup.bat is out of maintain. It is a draft version batch file, and not > implement all features listed in its header file. To avoid the confuse, > drop it from edk2 project, and keep edksetup.bat only. > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Liming Gao <liming.gao@intel.com> > --- > Edk2Setup.bat | 541 ---------------------------------------------------------- > 1 file changed, 541 deletions(-) > delete mode 100755 Edk2Setup.bat Meta-question: who is supposed to review such (top-level) patches? FWIW, I'm fine with the proposal. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Thanks Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
Laszlo: BaseTools owner should fix and review those batch files. And, thanks for your review. Hi, all I don't get the different opinion so far. I will wait for one more week. If no comments, I will do this change. Thanks Liming >-----Original Message----- >From: Laszlo Ersek [mailto:lersek@redhat.com] >Sent: Thursday, January 11, 2018 6:30 PM >To: Gao, Liming <liming.gao@intel.com> >Cc: edk2-devel@lists.01.org >Subject: Re: [edk2] [Patch] Edk2: Retire Edk2Setup.bat > >On 01/11/18 09:21, Liming Gao wrote: >> Edk2Setup.bat is out of maintain. It is a draft version batch file, and not >> implement all features listed in its header file. To avoid the confuse, >> drop it from edk2 project, and keep edksetup.bat only. >> >> Contributed-under: TianoCore Contribution Agreement 1.1 >> Signed-off-by: Liming Gao <liming.gao@intel.com> >> --- >> Edk2Setup.bat | 541 ---------------------------------------------------------- >> 1 file changed, 541 deletions(-) >> delete mode 100755 Edk2Setup.bat > >Meta-question: who is supposed to review such (top-level) patches? > >FWIW, I'm fine with the proposal. > >Reviewed-by: Laszlo Ersek <lersek@redhat.com> > >Thanks >Laszlo _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.