OptionRomPkg/MarvellYukonDxe/ComponentName.c | 313 +++ OptionRomPkg/MarvellYukonDxe/DriverBinding.c | 671 +++++ OptionRomPkg/MarvellYukonDxe/MarvellYukon.h | 782 ++++++ OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc | 79 + OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf | 65 + OptionRomPkg/MarvellYukonDxe/Snp.c | 1469 +++++++++++ OptionRomPkg/MarvellYukonDxe/e1000phy.c | 622 +++++ OptionRomPkg/MarvellYukonDxe/e1000phyreg.h | 410 +++ OptionRomPkg/MarvellYukonDxe/if_media.h | 273 ++ OptionRomPkg/MarvellYukonDxe/if_msk.c | 2978 ++++++++++++++++++++++ OptionRomPkg/MarvellYukonDxe/if_msk.h | 66 + OptionRomPkg/MarvellYukonDxe/if_mskreg.h | 2516 ++++++++++++++++++ OptionRomPkg/MarvellYukonDxe/miivar.h | 187 ++ OptionRomPkg/OptionRomPkg.dsc | 3 + 14 files changed, 10434 insertions(+) create mode 100644 OptionRomPkg/MarvellYukonDxe/ComponentName.c create mode 100644 OptionRomPkg/MarvellYukonDxe/DriverBinding.c create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukon.h create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf create mode 100644 OptionRomPkg/MarvellYukonDxe/Snp.c create mode 100644 OptionRomPkg/MarvellYukonDxe/e1000phy.c create mode 100644 OptionRomPkg/MarvellYukonDxe/e1000phyreg.h create mode 100644 OptionRomPkg/MarvellYukonDxe/if_media.h create mode 100644 OptionRomPkg/MarvellYukonDxe/if_msk.c create mode 100644 OptionRomPkg/MarvellYukonDxe/if_msk.h create mode 100644 OptionRomPkg/MarvellYukonDxe/if_mskreg.h create mode 100644 OptionRomPkg/MarvellYukonDxe/miivar.h
The Marvell Yukon Ethernet controller driver has existed in
OpenPlatformPkg for a while now. The chip exists on plug-in cards,
as well as (at least) the ARM Juno development board and the
Softiron 1000 platform.
Buildable as a standalone driver, also as EBC.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Due to its origin in FreeBSD, parts of this driver are extremely
nonconformant to the coding style. And it is generally a bit messy,
although it has seen functional improvements over the last year.
Sending this as an RFC to:
1) gain some feedback as to how strictly coding style conformance
should be applied to code imported from external projects.
2) have some feedback on the driver binding and language support
implementation
OptionRomPkg/MarvellYukonDxe/ComponentName.c | 313 +++
OptionRomPkg/MarvellYukonDxe/DriverBinding.c | 671 +++++
OptionRomPkg/MarvellYukonDxe/MarvellYukon.h | 782 ++++++
OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc | 79 +
OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf | 65 +
OptionRomPkg/MarvellYukonDxe/Snp.c | 1469 +++++++++++
OptionRomPkg/MarvellYukonDxe/e1000phy.c | 622 +++++
OptionRomPkg/MarvellYukonDxe/e1000phyreg.h | 410 +++
OptionRomPkg/MarvellYukonDxe/if_media.h | 273 ++
OptionRomPkg/MarvellYukonDxe/if_msk.c | 2978 ++++++++++++++++++++++
OptionRomPkg/MarvellYukonDxe/if_msk.h | 66 +
OptionRomPkg/MarvellYukonDxe/if_mskreg.h | 2516 ++++++++++++++++++
OptionRomPkg/MarvellYukonDxe/miivar.h | 187 ++
OptionRomPkg/OptionRomPkg.dsc | 3 +
14 files changed, 10434 insertions(+)
create mode 100644 OptionRomPkg/MarvellYukonDxe/ComponentName.c
create mode 100644 OptionRomPkg/MarvellYukonDxe/DriverBinding.c
create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukon.h
create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc
create mode 100644 OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf
create mode 100644 OptionRomPkg/MarvellYukonDxe/Snp.c
create mode 100644 OptionRomPkg/MarvellYukonDxe/e1000phy.c
create mode 100644 OptionRomPkg/MarvellYukonDxe/e1000phyreg.h
create mode 100644 OptionRomPkg/MarvellYukonDxe/if_media.h
create mode 100644 OptionRomPkg/MarvellYukonDxe/if_msk.c
create mode 100644 OptionRomPkg/MarvellYukonDxe/if_msk.h
create mode 100644 OptionRomPkg/MarvellYukonDxe/if_mskreg.h
create mode 100644 OptionRomPkg/MarvellYukonDxe/miivar.h
diff --git a/OptionRomPkg/MarvellYukonDxe/ComponentName.c b/OptionRomPkg/MarvellYukonDxe/ComponentName.c
new file mode 100644
index 0000000000..c3523a2425
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/ComponentName.c
@@ -0,0 +1,313 @@
+/**
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include "MarvellYukon.h"
+
+//
+// EFI Component Name Functions
+//
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ <at> param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ <at> param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ <at> param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ <at> retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ <at> retval EFI_INVALID_PARAMETER Language is NULL.
+
+ <at> retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SimpleNetworkComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ <at> param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ <at> param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ <at> param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ <at> param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ <at> param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ <at> retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ <at> retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+ <at> retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ <at> retval EFI_INVALID_PARAMETER Language is NULL.
+
+ <at> retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SimpleNetworkComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gSimpleNetworkComponentName = {
+ SimpleNetworkComponentNameGetDriverName,
+ SimpleNetworkComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gSimpleNetworkComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) SimpleNetworkComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) SimpleNetworkComponentNameGetControllerName,
+ "en"
+};
+
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSimpleNetworkDriverNameTable[] = {
+ {
+ "eng;en",
+ L"Marvell Yukon Simple Network Protocol Driver"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ <at> param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ <at> param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ <at> param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ <at> retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ <at> retval EFI_INVALID_PARAMETER Language is NULL.
+
+ <at> retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SimpleNetworkComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mSimpleNetworkDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gSimpleNetworkComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+ Currently not implemented.
+
+ <at> param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL
+ or EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ <at> param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ <at> param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ <at> param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ <at> param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ <at> retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ <at> retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+ <at> retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ <at> retval EFI_INVALID_PARAMETER Language is NULL.
+
+ <at> retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ <at> retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+SimpleNetworkComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ return EFI_UNSUPPORTED;
+}
diff --git a/OptionRomPkg/MarvellYukonDxe/DriverBinding.c b/OptionRomPkg/MarvellYukonDxe/DriverBinding.c
new file mode 100644
index 0000000000..8941e5398b
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/DriverBinding.c
@@ -0,0 +1,671 @@
+/** <at> file
+ Implementation of driver entry point and driver binding protocol.
+
+Copyright (c) 2004 - 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2016, ARM Limited. All rights reserved.
+Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
+
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/NetLib.h>
+#include <Library/DevicePathLib.h>
+#include "MarvellYukon.h"
+#include "if_msk.h"
+
+STATIC LIST_ENTRY MarvellYukonDrvDataHead;
+
+/**
+ Test to see if this driver supports ControllerHandle. This service
+ is called by the EFI boot service ConnectController(). In
+ order to make drivers as small as possible, there are a few calling
+ restrictions for this service. ConnectController() must
+ follow these calling restrictions. If any other agent wishes to call
+ Supported() it must also follow these calling restrictions.
+
+ <at> param This Protocol instance pointer.
+ <at> param ControllerHandle Handle of device to test.
+ <at> param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ <at> retval EFI_SUCCESS This driver supports this device.
+ <at> retval EFI_ALREADY_STARTED This driver is already running on this device.
+ <at> retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDriverSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ //
+ // Test that the PCI IO Protocol is attached to the controller handle and no other driver is consuming it
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (!EFI_ERROR (Status)) {
+ //
+ // Test whether the controller is on a supported NIC
+ //
+ Status = mskc_probe (PciIo);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_UNSUPPORTED;
+ } else {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: MarvellYukonDriverSupported: Supported Controller = %p\n", Controller));
+ }
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ }
+
+ return Status;
+}
+
+/**
+ Start this driver on Controller by opening PciIo and DevicePath protocols.
+ Initialize PXE structures, create a copy of the Controller Device Path with the
+ NIC's MAC address appended to it, install the NetworkInterfaceIdentifier protocol
+ on the newly created Device Path.
+
+ @param [in] pThis Protocol instance pointer.
+ @param [in] Controller Handle of device to work with.
+ @param [in] pRemainingDevicePath Not used, always produce all possible children.
+
+ @retval EFI_SUCCESS This driver is added to Controller.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDriverStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL * pThis,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL * pRemainingDevicePath
+ )
+{
+
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ MAC_ADDR_DEVICE_PATH MacDeviceNode;
+ VOID *ChildPciIo;
+ YUKON_DRIVER *YukonDriver;
+ struct msk_softc *ScData;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINTN Port;
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ pThis->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: OpenProtocol: EFI_PCI_IO_PROTOCOL ERROR Status = %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Initialize Marvell Yukon controller
+ // Get number of ports and MAC address for each port
+ //
+ Status = mskc_attach (PciIo, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = MarvellYukonAddControllerData (Controller, ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ for (Port = 0; Port < ScData->msk_num_port; Port++) {
+ if (ScData->msk_if[Port] == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: invalid buffer size\n"));
+ return EFI_BAD_BUFFER_SIZE;
+ }
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (YUKON_DRIVER),
+ (VOID**) &YukonDriver);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", Status));
+ return Status;
+ }
+
+ gBS->SetMem (YukonDriver, sizeof (YUKON_DRIVER), 0);
+ EfiInitializeLock (&YukonDriver->Lock, TPL_NOTIFY);
+
+ //
+ // Set the structure signature
+ //
+ YukonDriver->Signature = YUKON_DRIVER_SIGNATURE;
+
+ //
+ // Set MAC address
+ //
+ gBS->CopyMem (&YukonDriver->SnpMode.PermanentAddress, &(ScData->msk_if[Port])->MacAddress,
+ sizeof (EFI_MAC_ADDRESS));
+
+ //
+ // Set Port number
+ //
+ YukonDriver->Port = Port;
+
+ //
+ // Initialize the simple network protocol
+ //
+ Status = InitializeSNPProtocol (YukonDriver);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: InitializeSNPProtocol: ERROR Status = %r\n", Status));
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+ }
+
+ //
+ // Set Device Path
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &ParentDevicePath,
+ pThis->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: OpenProtocol:EFI_DEVICE_PATH_PROTOCOL error. Status = %r\n", Status));
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ gBS->FreePool (YukonDriver);
+ return Status;
+ }
+
+ gBS->SetMem (&MacDeviceNode, sizeof (MAC_ADDR_DEVICE_PATH), 0);
+ MacDeviceNode.Header.Type = MESSAGING_DEVICE_PATH;
+ MacDeviceNode.Header.SubType = MSG_MAC_ADDR_DP;
+
+ SetDevicePathNodeLength (&MacDeviceNode, sizeof (MacDeviceNode));
+
+ //
+ // Assign fields for device path
+ //
+ gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress,
+ sizeof (EFI_MAC_ADDRESS));
+ gBS->CopyMem (&MacDeviceNode.MacAddress, &YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS));
+
+ MacDeviceNode.IfType = YukonDriver->SnpMode.IfType;
+ YukonDriver->DevicePath = AppendDevicePathNode (ParentDevicePath, &MacDeviceNode.Header);
+ if (YukonDriver->DevicePath == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: AppendDevicePathNode: ERROR Status = %r\n", EFI_OUT_OF_RESOURCES));
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+ gBS->FreePool (YukonDriver);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Install both the simple network and device path protocols.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &YukonDriver->Controller,
+ &gEfiSimpleNetworkProtocolGuid,
+ &YukonDriver->Snp,
+ &gEfiDevicePathProtocolGuid,
+ YukonDriver->DevicePath,
+ NULL
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: InstallMultipleProtocolInterfaces error. Status = %r\n", Status));
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ gBS->FreePool (YukonDriver->DevicePath);
+ gBS->FreePool (YukonDriver);
+ return Status;
+ } else {
+
+ //
+ // Hook as a child device
+ //
+ Status = gBS->OpenProtocol (Controller,
+ &gEfiPciIoProtocolGuid,
+ &ChildPciIo,
+ pThis->DriverBindingHandle,
+ YukonDriver->Controller,
+ EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: OpenProtocol: child controller error. Status = %r\n", Status));
+
+ gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiSimpleNetworkProtocolGuid,
+ &YukonDriver->Snp,
+ &gEfiDevicePathProtocolGuid,
+ YukonDriver->DevicePath,
+ NULL
+ );
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ gBS->FreePool (YukonDriver->DevicePath);
+ gBS->FreePool (YukonDriver);
+ return Status;
+ } else {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: MarvellYukonDriverSupported: New Controller Handle = %p\n",
+ YukonDriver->Controller));
+ }
+
+ Status = MarvellYukonAddControllerData (YukonDriver->Controller, ScData);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Failed to register port %d with controller handle %p\n", Port,
+ YukonDriver->Controller));
+ }
+
+ }
+
+ if (!EFI_ERROR (Status)) {
+ Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
+ &MarvellYukonNotifyExitBoot, YukonDriver, &YukonDriver->ExitBootEvent);
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Stop this driver on Controller by removing NetworkInterfaceIdentifier protocol and
+ closing the DevicePath and PciIo protocols on Controller.
+
+ @param [in] pThis Protocol instance pointer.
+ @param [in] Controller Handle of device to stop driver on.
+ @param [in] NumberOfChildren How many children need to be stopped.
+ @param [in] pChildHandleBuffer Not used.
+
+ @retval EFI_SUCCESS This driver is removed Controller.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+ @retval other This driver was not removed from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDriverStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL * pThis,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE * ChildHandleBuffer
+ )
+{
+ EFI_SIMPLE_NETWORK_PROTOCOL *SimpleNetwork;
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ UINTN ChildController;
+ struct msk_softc *ScData;
+
+ if (pThis == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: MarvellYukonDriverStop() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (NumberOfChildren > 0 && ChildHandleBuffer == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: MarvellYukonDriverStop() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ for (ChildController = 0; ChildController < NumberOfChildren; ChildController ++) {
+
+ Status = gBS->OpenProtocol (
+ ChildHandleBuffer[ChildController],
+ &gEfiSimpleNetworkProtocolGuid,
+ (VOID **) &SimpleNetwork,
+ pThis->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+
+ if (!EFI_ERROR(Status)) {
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (SimpleNetwork);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ ASSERT (YukonDriver->Controller == ChildHandleBuffer[ChildController]);
+ if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {
+
+ //
+ // Device in use, cannot stop driver instance
+ //
+ Status = EFI_DEVICE_ERROR;
+ DEBUG ((DEBUG_ERROR,
+ "Marvell Yukon: MarvellYukonDriverStop: Error: SNP is not stopped. Status %r\n", Status));
+ } else {
+
+ //
+ // Unhook the child controller
+ //
+ Status = gBS->CloseProtocol (Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ YukonDriver->Controller);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "Marvell Yukon: MarvellYukonDriverStop:Close Child EfiPciIoProtocol error. Status %r\n", Status));
+ }
+
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ YukonDriver->Controller,
+ &gEfiSimpleNetworkProtocolGuid,
+ &YukonDriver->Snp,
+ &gEfiDevicePathProtocolGuid,
+ YukonDriver->DevicePath,
+ NULL
+ );
+
+ if (EFI_ERROR(Status)){
+ DEBUG ((DEBUG_ERROR,
+ "Marvell Yukon: MarvellYukonDriverStop:UninstallMultipleProtocolInterfaces error. Status %r\n",
+ Status));
+ }
+
+ MarvellYukonDelControllerData (YukonDriver->Controller);
+
+ gBS->CloseEvent (YukonDriver->ExitBootEvent);
+ gBS->FreePool (YukonDriver->DevicePath);
+ gBS->FreePool (YukonDriver);
+ }
+ gBS->RestoreTPL (OldTpl);
+ }
+ }
+
+ Status = gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close EfiPciIoProtocol error. Status %r\n", Status));
+ }
+
+ Status = MarvellYukonGetControllerData (Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ mskc_detach (ScData);
+ gBS->FreePool (ScData);
+ Status = MarvellYukonDelControllerData (Controller);
+
+ return Status;
+}
+
+/**
+ Process exit boot event.
+
+ @param [in] Event Event id.
+ @param [in] Context Driver context.
+
+**/
+VOID
+EFIAPI
+MarvellYukonNotifyExitBoot (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ YUKON_DRIVER *YukonDriver;
+ EFI_STATUS Status;
+
+ if (Context == NULL) {
+ DEBUG ((DEBUG_ERROR,
+ "Marvell Yukon: MarvellYukonNotifyExitBoot() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ } else {
+
+ YukonDriver = Context;
+
+ if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {
+ Status = YukonDriver->Snp.Shutdown(&YukonDriver->Snp);
+ if (!EFI_ERROR (Status)) {
+ YukonDriver->Snp.Stop(&YukonDriver->Snp);
+ }
+ }
+ }
+}
+
+/**
+ Get driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonGetControllerData (
+ IN EFI_HANDLE Controller,
+ OUT struct msk_softc **Data
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (!EFI_ERROR (Status)) {
+ *Data = DrvNode->Data;
+ }
+ return Status;
+}
+
+/**
+ Add driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [in] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonAddControllerData (
+ IN EFI_HANDLE Controller,
+ IN struct msk_softc *Data
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (EFI_ERROR (Status)) {
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (MSK_LINKED_DRV_BUF),
+ (VOID**) &DrvNode);
+ if (!EFI_ERROR (Status)) {
+ DrvNode->Signature = MSK_DRV_SIGNATURE;
+ DrvNode->Controller = Controller;
+ DrvNode->Data = Data;
+ InsertTailList (&MarvellYukonDrvDataHead, &DrvNode->Link);
+ }
+ } else {
+ Status = EFI_ALREADY_STARTED;
+ }
+
+ return Status;
+}
+
+/**
+ Delete driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDelControllerData (
+ IN EFI_HANDLE Controller
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (!EFI_ERROR (Status)) {
+ RemoveEntryList (&DrvNode->Link);
+ gBS->FreePool (DrvNode);
+ }
+
+ return Status;
+}
+
+/**
+ Find node associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] DrvLinkedBuff Controller's node.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonFindControllerNode (
+ IN EFI_HANDLE Controller,
+ OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvBuffNode;
+ EFI_STATUS Status;
+ LIST_ENTRY *Node;
+
+ Status = EFI_NOT_FOUND;
+
+ Node = GetFirstNode (&MarvellYukonDrvDataHead);
+ while (!IsNull (&MarvellYukonDrvDataHead, Node)) {
+ DrvBuffNode = MSK_DRV_INFO_FROM_THIS (Node);
+ if (DrvBuffNode->Controller == Controller) {
+ *DrvLinkedBuff = DrvBuffNode;
+ Status = EFI_SUCCESS;
+ break;
+ }
+ Node = GetNextNode (&MarvellYukonDrvDataHead, Node);
+ }
+
+ return Status;
+}
+
+//
+// Simple Network Protocol Driver Global Variables
+//
+EFI_DRIVER_BINDING_PROTOCOL gMarvellYukonDriverBinding = {
+ MarvellYukonDriverSupported,
+ MarvellYukonDriverStart,
+ MarvellYukonDriverStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+/**
+ The Marvell Yukon driver entry point.
+
+ <at> param ImageHandle The driver image handle.
+ <at> param SystemTable The system table.
+
+ <at> retval EFI_SUCCESS Initialization routine has found and initialized
+ hardware successfully.
+ <at> retval Other Return value from HandleProtocol for
+ DeviceIoProtocol or LoadedImageProtocol
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeMarvellYukonDriver (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: InitializeMarvellYukonDriver()\n"));
+
+ if (SystemTable == NULL) {
+ DEBUG ((DEBUG_ERROR,
+ "Marvell Yukon: InitializeMarvellYukonDriver() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gMarvellYukonDriverBinding,
+ NULL,
+ &gSimpleNetworkComponentName,
+ &gSimpleNetworkComponentName2
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: InitializeMarvellYukonDriver(): Driver binding failed\n"));
+ return Status;
+ }
+
+ InitializeListHead (&MarvellYukonDrvDataHead);
+
+ return Status;
+}
diff --git a/OptionRomPkg/MarvellYukonDxe/MarvellYukon.h b/OptionRomPkg/MarvellYukonDxe/MarvellYukon.h
new file mode 100644
index 0000000000..a419234097
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/MarvellYukon.h
@@ -0,0 +1,782 @@
+/**
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef _SNP_H_
+#define _SNP_H_
+
+
+#include <Uefi.h>
+
+#include <Protocol/SimpleNetwork.h>
+#include <Protocol/PciIo.h>
+#include <Protocol/DevicePath.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseLib.h>
+#include <Library/UefiLib.h>
+#include <Library/NetLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+
+#include <IndustryStandard/Pci.h>
+
+#define YUKON_DRIVER_SIGNATURE SIGNATURE_32 ('m', 'y', 'u', 'k')
+
+typedef struct {
+ UINT32 Signature;
+ EFI_LOCK Lock;
+
+ EFI_HANDLE Controller;
+ UINTN Port;
+ EFI_EVENT ExitBootEvent;
+
+ EFI_SIMPLE_NETWORK_PROTOCOL Snp;
+ EFI_SIMPLE_NETWORK_MODE SnpMode;
+
+ EFI_HANDLE DeviceHandle;
+ EFI_DEVICE_PATH_PROTOCOL* DevicePath;
+ EFI_PCI_IO_PROTOCOL* PciIo;
+
+} YUKON_DRIVER;
+
+#define YUKON_DEV_FROM_THIS_SNP(a) CR (a, YUKON_DRIVER, Snp, YUKON_DRIVER_SIGNATURE)
+
+#define SNP_MEM_PAGES(x) (((x) - 1) / 4096 + 1)
+
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+ EFI_HANDLE Controller;
+ struct msk_softc *Data;
+} MSK_LINKED_DRV_BUF;
+
+#define MSK_DRV_SIGNATURE SIGNATURE_32 ('m', 's', 'k', 'c')
+
+#define MSK_DRV_INFO_FROM_THIS(a) \
+ CR (a, \
+ MSK_LINKED_DRV_BUF, \
+ Link, \
+ MSK_DRV_SIGNATURE \
+ );
+
+//
+// Global Variables
+//
+extern EFI_COMPONENT_NAME_PROTOCOL gSimpleNetworkComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gSimpleNetworkComponentName2;
+
+//
+// The SNP driver control functions
+//
+
+EFI_STATUS
+InitializeSNPProtocol (
+ IN OUT YUKON_DRIVER *YukonDriver
+ );
+
+/**
+ Changes the state of a network interface from "stopped" to "started".
+
+ This function starts a network interface. If the network interface successfully
+ starts, then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> retval EFI_SUCCESS The network interface was started.
+ <at> retval EFI_ALREADY_STARTED The network interface is already in the started state.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStart (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ );
+
+/**
+ Changes the state of a network interface from "started" to "stopped".
+
+ This function stops a network interface. This call is only valid if the network
+ interface is in the started state. If the network interface was successfully
+ stopped, then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+
+ <at> retval EFI_SUCCESS The network interface was stopped.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStop (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ );
+
+//
+// The SNP protocol functions
+//
+
+
+/**
+ Resets a network adapter and allocates the transmit and receive buffers
+ required by the network interface; optionally, also requests allocation of
+ additional transmit and receive buffers.
+
+ This function allocates the transmit and receive buffers required by the network
+ interface. If this allocation fails, then EFI_OUT_OF_RESOURCES is returned.
+ If the allocation succeeds and the network interface is successfully initialized,
+ then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> param ExtraRxBufferSize The size, in bytes, of the extra receive buffer space
+ that the driver should allocate for the network interface.
+ Some network interfaces will not be able to use the
+ extra buffer, and the caller will not know if it is
+ actually being used.
+ <at> param ExtraTxBufferSize The size, in bytes, of the extra transmit buffer space
+ that the driver should allocate for the network interface.
+ Some network interfaces will not be able to use the
+ extra buffer, and the caller will not know if it is
+ actually being used.
+
+ <at> retval EFI_SUCCESS The network interface was initialized.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_OUT_OF_RESOURCES There was not enough memory for the transmit and
+ receive buffers.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpInitialize (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINTN ExtraRxBufferSize OPTIONAL,
+ IN UINTN ExtraTxBufferSize OPTIONAL
+ );
+
+/**
+ Resets a network adapter and reinitializes it with the parameters that were
+ provided in the previous call to Initialize().
+
+ This function resets a network adapter and reinitializes it with the parameters
+ that were provided in the previous call to Initialize(). The transmit and
+ receive queues are emptied and all pending interrupts are cleared.
+ Receive filters, the station address, the statistics, and the multicast-IP-to-HW
+ MAC addresses are not reset by this call. If the network interface was
+ successfully reset, then EFI_SUCCESS will be returned. If the driver has not
+ been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param ExtendedVerification Indicates that the driver may perform a more
+ exhaustive verification operation of the device
+ during reset.
+
+ <at> retval EFI_SUCCESS The network interface was reset.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the parameters has an unsupported value.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReset (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ );
+
+/**
+ Resets a network adapter and leaves it in a state that is safe for another
+ driver to initialize.
+
+ This function releases the memory buffers assigned in the Initialize() call.
+ Pending transmits and receives are lost, and interrupts are cleared and disabled.
+ After this call, only the Initialize() and Stop() calls may be used. If the
+ network interface was successfully shutdown, then EFI_SUCCESS will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> retval EFI_SUCCESS The network interface was shutdown.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpShutdown (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ );
+
+/**
+ Manages the multicast receive filters of a network interface.
+
+ This function is used enable and disable the hardware and software receive
+ filters for the underlying network device.
+ The receive filter change is broken down into three steps:
+ * The filter mask bits that are set (ON) in the Enable parameter are added to
+ the current receive filter settings.
+ * The filter mask bits that are set (ON) in the Disable parameter are subtracted
+ from the updated receive filter settings.
+ * If the resulting receive filter setting is not supported by the hardware a
+ more liberal setting is selected.
+ If the same bits are set in the Enable and Disable parameters, then the bits
+ in the Disable parameter takes precedence.
+ If the ResetMCastFilter parameter is TRUE, then the multicast address list
+ filter is disabled (irregardless of what other multicast bits are set in the
+ Enable and Disable parameters). The SNP->SnpMode->MCastFilterCount field is set
+ to zero. The Snp->SnpMode->MCastFilter contents are undefined.
+ After enabling or disabling receive filter settings, software should verify
+ the new settings by checking the Snp->SnpMode->ReceiveFilterSettings,
+ Snp->SnpMode->MCastFilterCount and Snp->SnpMode->MCastFilter fields.
+ Note: Some network drivers and/or devices will automatically promote receive
+ filter settings if the requested setting can not be honored. For example, if
+ a request for four multicast addresses is made and the underlying hardware
+ only supports two multicast addresses the driver might set the promiscuous
+ or promiscuous multicast receive filters instead. The receiving software is
+ responsible for discarding any extra packets that get through the hardware
+ receive filters.
+ Note: Note: To disable all receive filter hardware, the network driver must
+ be Shutdown() and Stopped(). Calling ReceiveFilters() with Disable set to
+ Snp->SnpMode->ReceiveFilterSettings will make it so no more packets are
+ returned by the Receive() function, but the receive hardware may still be
+ moving packets into system memory before inspecting and discarding them.
+ Unexpected system errors, reboots and hangs can occur if an OS is loaded
+ and the network devices are not Shutdown() and Stopped().
+ If ResetMCastFilter is TRUE, then the multicast receive filter list on the
+ network interface will be reset to the default multicast receive filter list.
+ If ResetMCastFilter is FALSE, and this network interface allows the multicast
+ receive filter list to be modified, then the MCastFilterCnt and MCastFilter
+ are used to update the current multicast receive filter list. The modified
+ receive filter list settings can be found in the MCastFilter field of
+ EFI_SIMPLE_NETWORK_MODE. If the network interface does not allow the multicast
+ receive filter list to be modified, then EFI_INVALID_PARAMETER will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+ If the receive filter mask and multicast receive filter list have been
+ successfully updated on the network interface, EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Enable A bit mask of receive filters to enable on the network
+ interface.
+ <at> param Disable A bit mask of receive filters to disable on the network
+ interface. For backward compatibility with EFI 1.1
+ platforms, the EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit
+ must be set when the ResetMCastFilter parameter is TRUE.
+ <at> param ResetMCastFilter Set to TRUE to reset the contents of the multicast
+ receive filters on the network interface to their
+ default values.
+ <at> param MCastFilterCnt Number of multicast HW MAC addresses in the new MCastFilter
+ list. This value must be less than or equal to the
+ MCastFilterCnt field of EFI_SIMPLE_NETWORK_MODE.
+ This field is optional if ResetMCastFilter is TRUE.
+ <at> param MCastFilter A pointer to a list of new multicast receive filter HW
+ MAC addresses. This list will replace any existing
+ multicast HW MAC address list. This field is optional
+ if ResetMCastFilter is TRUE.
+
+ <at> retval EFI_SUCCESS The multicast receive filter list was updated.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * This is NULL
+ * There are bits set in Enable that are not set
+ in Snp->SnpMode->ReceiveFilterMask
+ * There are bits set in Disable that are not set
+ in Snp->SnpMode->ReceiveFilterMask
+ * Multicast is being enabled (the
+ EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit is
+ set in Enable, it is not set in Disable, and
+ ResetMCastFilter is FALSE) and MCastFilterCount
+ is zero
+ * Multicast is being enabled and MCastFilterCount
+ is greater than Snp->SnpMode->MaxMCastFilterCount
+ * Multicast is being enabled and MCastFilter is NULL
+ * Multicast is being enabled and one or more of
+ the addresses in the MCastFilter list are not
+ valid multicast MAC addresses
+ <at> retval EFI_DEVICE_ERROR One or more of the following conditions is TRUE:
+ * The network interface has been started but has
+ not been initialized
+ * An unexpected error was returned by the
+ underlying network driver or device
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReceiveFilters (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINT32 Enable,
+ IN UINT32 Disable,
+ IN BOOLEAN ResetMCastFilter,
+ IN UINTN MCastFilterCnt, OPTIONAL
+ IN EFI_MAC_ADDRESS *MCastFilter OPTIONAL
+ );
+
+/**
+ Modifies or resets the current station address, if supported.
+
+ This function modifies or resets the current station address of a network
+ interface, if supported. If Reset is TRUE, then the current station address is
+ set to the network interface's permanent address. If Reset is FALSE, and the
+ network interface allows its station address to be modified, then the current
+ station address is changed to the address specified by New. If the network
+ interface does not allow its station address to be modified, then
+ EFI_INVALID_PARAMETER will be returned. If the station address is successfully
+ updated on the network interface, EFI_SUCCESS will be returned. If the driver
+ has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Reset Flag used to reset the station address to the network interface's
+ permanent address.
+ <at> param New New station address to be used for the network interface.
+
+
+ <at> retval EFI_SUCCESS The network interface's station address was updated.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
+ started by calling Start().
+ <at> retval EFI_INVALID_PARAMETER The New station address was not accepted by the NIC.
+ <at> retval EFI_INVALID_PARAMETER Reset is FALSE and New is NULL.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_DEVICE_ERROR An error occurred attempting to set the new
+ station address.
+ <at> retval EFI_UNSUPPORTED The NIC does not support changing the network
+ interface's station address.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStationAddress (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN Reset,
+ IN EFI_MAC_ADDRESS *New OPTIONAL
+ );
+
+/**
+ Resets or collects the statistics on a network interface.
+
+ This function resets or collects the statistics on a network interface. If the
+ size of the statistics table specified by StatisticsSize is not big enough for
+ all the statistics that are collected by the network interface, then a partial
+ buffer of statistics is returned in StatisticsTable, StatisticsSize is set to
+ the size required to collect all the available statistics, and
+ EFI_BUFFER_TOO_SMALL is returned.
+ If StatisticsSize is big enough for all the statistics, then StatisticsTable
+ will be filled, StatisticsSize will be set to the size of the returned
+ StatisticsTable structure, and EFI_SUCCESS is returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+ If Reset is FALSE, and both StatisticsSize and StatisticsTable are NULL, then
+ no operations will be performed, and EFI_SUCCESS will be returned.
+ If Reset is TRUE, then all of the supported statistics counters on this network
+ interface will be reset to zero.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Reset Set to TRUE to reset the statistics for the network interface.
+ <at> param StatisticsSize On input the size, in bytes, of StatisticsTable. On output
+ the size, in bytes, of the resulting table of statistics.
+ <at> param StatisticsTable A pointer to the EFI_NETWORK_STATISTICS structure that
+ contains the statistics. Type EFI_NETWORK_STATISTICS is
+ defined in "Related Definitions" below.
+
+ <at> retval EFI_SUCCESS The requested operation succeeded.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
+ started by calling Start().
+ <at> retval EFI_BUFFER_TOO_SMALL StatisticsSize is not NULL and StatisticsTable is
+ NULL. The current buffer size that is needed to
+ hold all the statistics is returned in StatisticsSize.
+ <at> retval EFI_BUFFER_TOO_SMALL StatisticsSize is not NULL and StatisticsTable is
+ not NULL. The current buffer size that is needed
+ to hold all the statistics is returned in
+ StatisticsSize. A partial set of statistics is
+ returned in StatisticsTable.
+ <at> retval EFI_INVALID_PARAMETER StatisticsSize is NULL and StatisticsTable is not
+ NULL.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_DEVICE_ERROR An error was encountered collecting statistics
+ from the NIC.
+ <at> retval EFI_UNSUPPORTED The NIC does not support collecting statistics
+ from the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStatistics (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN Reset,
+ IN OUT UINTN *StatisticsSize, OPTIONAL
+ IN OUT EFI_NETWORK_STATISTICS *StatisticsTable OPTIONAL
+ );
+
+/**
+ Converts a multicast IP address to a multicast HW MAC address.
+
+ This function converts a multicast IP address to a multicast HW MAC address
+ for all packet transactions. If the mapping is accepted, then EFI_SUCCESS will
+ be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param IPv6 Set to TRUE if the multicast IP address is IPv6 [RFC 2460].
+ Set to FALSE if the multicast IP address is IPv4 [RFC 791].
+ <at> param IP The multicast IP address that is to be converted to a multicast
+ HW MAC address.
+ <at> param MAC The multicast HW MAC address that is to be generated from IP.
+
+ <at> retval EFI_SUCCESS The multicast IP address was mapped to the
+ multicast HW MAC address.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not
+ been started by calling Start().
+ <at> retval EFI_INVALID_PARAMETER IP is NULL.
+ <at> retval EFI_INVALID_PARAMETER MAC is NULL.
+ <at> retval EFI_INVALID_PARAMETER IP does not point to a valid IPv4 or IPv6
+ multicast address.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_UNSUPPORTED IPv6 is TRUE and the implementation does not
+ support IPv6 multicast to MAC address conversion.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpMcastIpToMac (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN IPv6,
+ IN EFI_IP_ADDRESS *IP,
+ OUT EFI_MAC_ADDRESS *MAC
+ );
+
+/**
+ Performs read and write operations on the NVRAM device attached to a network
+ interface.
+
+ This function performs read and write operations on the NVRAM device attached
+ to a network interface. If ReadWrite is TRUE, a read operation is performed.
+ If ReadWrite is FALSE, a write operation is performed. Offset specifies the
+ byte offset at which to start either operation. Offset must be a multiple of
+ NvRamAccessSize , and it must have a value between zero and NvRamSize.
+ BufferSize specifies the length of the read or write operation. BufferSize must
+ also be a multiple of NvRamAccessSize, and Offset + BufferSize must not exceed
+ NvRamSize.
+ If any of the above conditions is not met, then EFI_INVALID_PARAMETER will be
+ returned.
+ If all the conditions are met and the operation is "read," the NVRAM device
+ attached to the network interface will be read into Buffer and EFI_SUCCESS
+ will be returned. If this is a write operation, the contents of Buffer will be
+ used to update the contents of the NVRAM device attached to the network
+ interface and EFI_SUCCESS will be returned.
+
+ It does the basic checking on the input parameters and retrieves snp structure
+ and then calls the read_nvdata() call which does the actual reading
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param ReadWrite TRUE for read operations, FALSE for write operations.
+ <at> param Offset Byte offset in the NVRAM device at which to start the read or
+ write operation. This must be a multiple of NvRamAccessSize
+ and less than NvRamSize. (See EFI_SIMPLE_NETWORK_MODE)
+ <at> param BufferSize The number of bytes to read or write from the NVRAM device.
+ This must also be a multiple of NvramAccessSize.
+ <at> param Buffer A pointer to the data buffer.
+
+ <at> retval EFI_SUCCESS The NVRAM access was performed.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * The This parameter is NULL
+ * The This parameter does not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure
+ * The Offset parameter is not a multiple of
+ EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
+ * The Offset parameter is not less than
+ EFI_SIMPLE_NETWORK_MODE.NvRamSize
+ * The BufferSize parameter is not a multiple of
+ EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
+ * The Buffer parameter is NULL
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network
+ interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpNvData (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN ReadWrite,
+ IN UINTN Offset,
+ IN UINTN BufferSize,
+ IN OUT VOID *Buffer
+ );
+
+/**
+ Reads the current interrupt status and recycled transmit buffer status from a
+ network interface.
+
+ This function gets the current interrupt and recycled transmit buffer status
+ from the network interface. The interrupt status is returned as a bit mask in
+ InterruptStatus. If InterruptStatus is NULL, the interrupt status will not be
+ read. If TxBuf is not NULL, a recycled transmit buffer address will be retrieved.
+ If a recycled transmit buffer address is returned in TxBuf, then the buffer has
+ been successfully transmitted, and the status for that buffer is cleared. If
+ the status of the network interface is successfully collected, EFI_SUCCESS
+ will be returned. If the driver has not been initialized, EFI_DEVICE_ERROR will
+ be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param InterruptStatus A pointer to the bit mask of the currently active
+ interrupts (see "Related Definitions"). If this is NULL,
+ the interrupt status will not be read from the device.
+ If this is not NULL, the interrupt status will be read
+ from the device. When the interrupt status is read, it
+ will also be cleared. Clearing the transmit interrupt does
+ not empty the recycled transmit buffer array.
+ <at> param TxBuf Recycled transmit buffer address. The network interface
+ will not transmit if its internal recycled transmit
+ buffer array is full. Reading the transmit buffer does
+ not clear the transmit interrupt. If this is NULL, then
+ the transmit buffer status will not be read. If there
+ are no transmit buffers to recycle and TxBuf is not NULL,
+ TxBuf will be set to NULL.
+
+ <at> retval EFI_SUCCESS The status of the network interface was retrieved.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpGetStatus (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ OUT UINT32 *InterruptStatus, OPTIONAL
+ OUT VOID **TxBuf OPTIONAL
+ );
+
+/**
+ Places a packet in the transmit queue of a network interface.
+
+ This function places the packet specified by Header and Buffer on the transmit
+ queue. If HeaderSize is nonzero and HeaderSize is not equal to
+ This->SnpMode->MediaHeaderSize, then EFI_INVALID_PARAMETER will be returned. If
+ BufferSize is less than This->SnpMode->MediaHeaderSize, then EFI_BUFFER_TOO_SMALL
+ will be returned. If Buffer is NULL, then EFI_INVALID_PARAMETER will be
+ returned. If HeaderSize is nonzero and DestAddr or Protocol is NULL, then
+ EFI_INVALID_PARAMETER will be returned. If the transmit engine of the network
+ interface is busy, then EFI_NOT_READY will be returned. If this packet can be
+ accepted by the transmit engine of the network interface, the packet contents
+ specified by Buffer will be placed on the transmit queue of the network
+ interface, and EFI_SUCCESS will be returned. GetStatus() can be used to
+ determine when the packet has actually been transmitted. The contents of the
+ Buffer must not be modified until the packet has actually been transmitted.
+ The Transmit() function performs nonblocking I/O. A caller who wants to perform
+ blocking I/O, should call Transmit(), and then GetStatus() until the
+ transmitted buffer shows up in the recycled transmit buffer.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param HeaderSize The size, in bytes, of the media header to be filled in by the
+ Transmit() function. If HeaderSize is nonzero, then it must
+ be equal to This->SnpMode->MediaHeaderSize and the DestAddr and
+ Protocol parameters must not be NULL.
+ <at> param BufferSize The size, in bytes, of the entire packet (media header and
+ data) to be transmitted through the network interface.
+ <at> param Buffer A pointer to the packet (media header followed by data) to be
+ transmitted. This parameter cannot be NULL. If HeaderSize is
+ zero, then the media header in Buffer must already be filled
+ in by the caller. If HeaderSize is nonzero, then the media
+ header will be filled in by the Transmit() function.
+ <at> param SrcAddr The source HW MAC address. If HeaderSize is zero, then this
+ parameter is ignored. If HeaderSize is nonzero and SrcAddr
+ is NULL, then This->SnpMode->CurrentAddress is used for the
+ source HW MAC address.
+ <at> param DestAddr The destination HW MAC address. If HeaderSize is zero, then
+ this parameter is ignored.
+ <at> param Protocol The type of header to build. If HeaderSize is zero, then this
+ parameter is ignored. See RFC 1700, section "Ether Types,"
+ for examples.
+
+ <at> retval EFI_SUCCESS The packet was placed on the transmit queue.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_NOT_READY The network interface is too busy to accept this
+ transmit request.
+ <at> retval EFI_BUFFER_TOO_SMALL The BufferSize parameter is too small.
+ <at> retval EFI_INVALID_PARAMETER One or more of the parameters has an unsupported
+ value.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpTransmit (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINTN HeaderSize,
+ IN UINTN BufferSize,
+ IN VOID *Buffer,
+ IN EFI_MAC_ADDRESS *SrcAddr, OPTIONAL
+ IN EFI_MAC_ADDRESS *DestAddr, OPTIONAL
+ IN UINT16 *Protocol OPTIONAL
+ );
+
+/**
+ Receives a packet from a network interface.
+
+ This function retrieves one packet from the receive queue of a network interface.
+ If there are no packets on the receive queue, then EFI_NOT_READY will be
+ returned. If there is a packet on the receive queue, and the size of the packet
+ is smaller than BufferSize, then the contents of the packet will be placed in
+ Buffer, and BufferSize will be updated with the actual size of the packet.
+ In addition, if SrcAddr, DestAddr, and Protocol are not NULL, then these values
+ will be extracted from the media header and returned. EFI_SUCCESS will be
+ returned if a packet was successfully received.
+ If BufferSize is smaller than the received packet, then the size of the receive
+ packet will be placed in BufferSize and EFI_BUFFER_TOO_SMALL will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param HeaderSize The size, in bytes, of the media header received on the network
+ interface. If this parameter is NULL, then the media header size
+ will not be returned.
+ <at> param BufferSize On entry, the size, in bytes, of Buffer. On exit, the size, in
+ bytes, of the packet that was received on the network interface.
+ <at> param Buffer A pointer to the data buffer to receive both the media
+ header and the data.
+ <at> param SrcAddr The source HW MAC address. If this parameter is NULL, the HW
+ MAC source address will not be extracted from the media header.
+ <at> param DestAddr The destination HW MAC address. If this parameter is NULL,
+ the HW MAC destination address will not be extracted from
+ the media header.
+ <at> param Protocol The media header type. If this parameter is NULL, then the
+ protocol will not be extracted from the media header. See
+ RFC 1700 section "Ether Types" for examples.
+
+ <at> retval EFI_SUCCESS The received data was stored in Buffer, and
+ BufferSize has been updated to the number of
+ bytes received.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_NOT_READY No packets have been received on the network interface.
+ <at> retval EFI_BUFFER_TOO_SMALL BufferSize is too small for the received packets.
+ BufferSize has been updated to the required size.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * The This parameter is NULL
+ * The This parameter does not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ * The BufferSize parameter is NULL
+ * The Buffer parameter is NULL
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReceive (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ OUT UINTN *HeaderSize OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer,
+ OUT EFI_MAC_ADDRESS *SrcAddr OPTIONAL,
+ OUT EFI_MAC_ADDRESS *DestAddr OPTIONAL,
+ OUT UINT16 *Protocol OPTIONAL
+ );
+
+#endif
+
+/**
+ Process exit boot event.
+
+ @param [in] Event Event id.
+ @param [in] Context Driver context.
+
+**/
+VOID
+EFIAPI
+MarvellYukonNotifyExitBoot (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ );
+
+/**
+ Get driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonGetControllerData (
+ IN EFI_HANDLE Controller,
+ OUT struct msk_softc **Data
+ );
+
+/**
+ Add driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [in] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonAddControllerData (
+ IN EFI_HANDLE Controller,
+ IN struct msk_softc *
+ );
+
+/**
+ Delete driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDelControllerData (
+ IN EFI_HANDLE Controller
+ );
+
+/**
+ Find node associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] DrvLinkedBuff Controller's node.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonFindControllerNode (
+ IN EFI_HANDLE Controller,
+ OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
+ );
+
+/* _SNP_H_ */
diff --git a/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc b/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc
new file mode 100644
index 0000000000..016073c99c
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.dsc
@@ -0,0 +1,79 @@
+#
+# Copyright (c) 2013-2016, ARM Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = MarvellYukonDxe
+ PLATFORM_GUID = 8391d2d4-63fc-11e6-82d5-7b6c1a2ff410
+ PLATFORM_VERSION = 0.96
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/OpenPlatformPkg
+ SUPPORTED_ARCHITECTURES = IA32|IPF|X64|EBC|ARM|AARCH64
+ BUILD_TARGETS = DEBUG|RELEASE|NOOPT
+ SKUID_IDENTIFIER = DEFAULT
+
+[LibraryClasses]
+ #
+ # Entry point
+ #
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ #
+ # Basic
+ #
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ #
+ # UEFI & PI
+ #
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ #
+ # Generic Modules
+ #
+ TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTemplate.inf
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ #
+ # Misc
+ #
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+
+[LibraryClasses.common.UEFI_DRIVER]
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ DebugLib|MdePkg/Library/UefiDebugLibConOut/UefiDebugLibConOut.inf
+
+[LibraryClasses.ARM, LibraryClasses.AARCH64]
+ #
+ # It is not possible to prevent ARM compiler calls to generic intrinsic functions.
+ # This library provides the instrinsic functions generated by a given compiler.
+ # [LibraryClasses.ARM] and NULL mean link this library into all ARM images.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+[LibraryClasses.EBC]
+ LockBoxLib|MdeModulePkg/Library/LockBoxNullLib/LockBoxNullLib.inf
+
+[PcdsFeatureFlag]
+
+[PcdsFixedAtBuild]
+
+[PcdsFixedAtBuild.IPF]
diff --git a/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf b/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf
new file mode 100644
index 0000000000..54ef18b7e8
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf
@@ -0,0 +1,65 @@
+## <at> file
+# Component description file for Marvell Yukon II SNP module.
+#
+# Copyright (c) 2011-2016, ARM Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed
+# and made available under the terms and conditions of the BSD License which
+# accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = MarvellYukonDxe
+ FILE_GUID = d7de5d0c-99f8-4970-b85c-c19df8997d7d
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeMarvellYukonDriver
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# DRIVER_BINDING = gMarvellYukonDriverBinding
+# COMPONENT_NAME = gSimpleNetworkComponentName
+# COMPONENT_NAME2 = gSimpleNetworkComponentName2
+#
+
+[Sources]
+ Snp.c
+ DriverBinding.c
+ ComponentName.c
+ e1000phy.c
+ if_msk.c
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ NetworkPkg/NetworkPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ DebugLib
+ DevicePathLib
+ IoLib
+ MemoryAllocationLib
+ NetLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gEfiDevicePathProtocolGuid
+ gEfiMetronomeArchProtocolGuid
+ gEfiPciIoProtocolGuid
+ gEfiPxeBaseCodeProtocolGuid
+ gEfiSimpleNetworkProtocolGuid
+
+[Depex]
+ TRUE
diff --git a/OptionRomPkg/MarvellYukonDxe/Snp.c b/OptionRomPkg/MarvellYukonDxe/Snp.c
new file mode 100644
index 0000000000..66a5650b0b
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/Snp.c
@@ -0,0 +1,1469 @@
+/** <at> file
+Provides the Simple Network functions.
+
+Copyright (c) 2004 - 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2016, ARM Limited. All rights reserved.
+Copyright (c) 2017, Linaro Limited. All rights reserved.<BR>
+
+This program and the accompanying materials are licensed
+and made available under the terms and conditions of the BSD License which
+accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "MarvellYukon.h"
+#include "if_msk.h"
+
+EFI_STATUS
+InitializeSNPProtocol (
+ IN OUT YUKON_DRIVER *YukonDriver
+ )
+{
+ EFI_STATUS Status;
+
+ Status = RETURN_SUCCESS;
+
+ YukonDriver->Snp.Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;
+ YukonDriver->Snp.Start = SnpStart;
+ YukonDriver->Snp.Stop = SnpStop;
+ YukonDriver->Snp.Initialize = SnpInitialize;
+ YukonDriver->Snp.Reset = SnpReset;
+ YukonDriver->Snp.Shutdown = SnpShutdown;
+ YukonDriver->Snp.ReceiveFilters = SnpReceiveFilters;
+ YukonDriver->Snp.StationAddress = SnpStationAddress;
+ YukonDriver->Snp.Statistics = SnpStatistics;
+ YukonDriver->Snp.MCastIpToMac = SnpMcastIpToMac;
+ YukonDriver->Snp.NvData = SnpNvData;
+ YukonDriver->Snp.GetStatus = SnpGetStatus;
+ YukonDriver->Snp.Transmit = SnpTransmit;
+ YukonDriver->Snp.Receive = SnpReceive;
+ YukonDriver->Snp.WaitForPacket = NULL;
+
+ YukonDriver->Snp.Mode = &YukonDriver->SnpMode;
+
+ //
+ // Initialize simple network protocol mode structure
+ //
+ YukonDriver->SnpMode.State = EfiSimpleNetworkStopped;
+ YukonDriver->SnpMode.HwAddressSize = NET_ETHER_ADDR_LEN;
+ YukonDriver->SnpMode.MediaHeaderSize = sizeof (ETHER_HEAD);
+ YukonDriver->SnpMode.MaxPacketSize = MAX_SUPPORTED_PACKET_SIZE;
+ YukonDriver->SnpMode.NvRamAccessSize = 0;
+ YukonDriver->SnpMode.NvRamSize = 0;
+ YukonDriver->SnpMode.IfType = NET_IFTYPE_ETHERNET;
+ YukonDriver->SnpMode.MaxMCastFilterCount = MAX_MCAST_FILTER_CNT;
+ YukonDriver->SnpMode.MCastFilterCount = 0;
+ gBS->SetMem (&YukonDriver->SnpMode.MCastFilter, MAX_MCAST_FILTER_CNT * sizeof(EFI_MAC_ADDRESS), 0);
+
+ //
+ // Set broadcast address
+ //
+ gBS->SetMem (&YukonDriver->SnpMode.BroadcastAddress, sizeof (EFI_MAC_ADDRESS), 0xFF);
+
+ YukonDriver->SnpMode.MediaPresentSupported = FALSE;
+ YukonDriver->SnpMode.MacAddressChangeable = FALSE;
+ YukonDriver->SnpMode.MultipleTxSupported = FALSE;
+ YukonDriver->SnpMode.ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST;
+ YukonDriver->SnpMode.ReceiveFilterSetting = 0;
+
+ YukonDriver->SnpMode.MediaPresent = TRUE;
+
+ return Status;
+}
+
+/**
+ Reads the current interrupt status and recycled transmit buffer status from a
+ network interface.
+
+ This function gets the current interrupt and recycled transmit buffer status
+ from the network interface. The interrupt status is returned as a bit mask in
+ InterruptStatus. If InterruptStatus is NULL, the interrupt status will not be
+ read. If TxBuf is not NULL, a recycled transmit buffer address will be retrieved.
+ If a recycled transmit buffer address is returned in TxBuf, then the buffer has
+ been successfully transmitted, and the status for that buffer is cleared. If
+ the status of the network interface is successfully collected, EFI_SUCCESS
+ will be returned. If the driver has not been initialized, EFI_DEVICE_ERROR will
+ be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param InterruptStatus A pointer to the bit mask of the currently active
+ interrupts (see "Related Definitions"). If this is NULL,
+ the interrupt status will not be read from the device.
+ If this is not NULL, the interrupt status will be read
+ from the device. When the interrupt status is read, it
+ will also be cleared. Clearing the transmit interrupt does
+ not empty the recycled transmit buffer array.
+ <at> param TxBuf Recycled transmit buffer address. The network interface
+ will not transmit if its internal recycled transmit
+ buffer array is full. Reading the transmit buffer does
+ not clear the transmit interrupt. If this is NULL, then
+ the transmit buffer status will not be read. If there
+ are no transmit buffers to recycle and TxBuf is not NULL,
+ TxBuf will be set to NULL.
+
+ <at> retval EFI_SUCCESS The status of the network interface was retrieved.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpGetStatus (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ OUT UINT32 *InterruptStatus, OPTIONAL
+ OUT VOID **TxBuf OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *Snp;
+ EFI_TPL OldTpl;
+ struct msk_softc *ScData;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Snp = YUKON_DEV_FROM_THIS_SNP (This);
+ if (Snp == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = MarvellYukonGetControllerData (Snp->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (Snp->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ mskc_getstatus (ScData->msk_if[Snp->Port], InterruptStatus, TxBuf);
+ Status = EFI_SUCCESS;
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Resets a network adapter and allocates the transmit and receive buffers
+ required by the network interface; optionally, also requests allocation of
+ additional transmit and receive buffers.
+
+ This function allocates the transmit and receive buffers required by the network
+ interface. If this allocation fails, then EFI_OUT_OF_RESOURCES is returned.
+ If the allocation succeeds and the network interface is successfully initialized,
+ then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> param ExtraRxBufferSize The size, in bytes, of the extra receive buffer space
+ that the driver should allocate for the network interface.
+ Some network interfaces will not be able to use the
+ extra buffer, and the caller will not know if it is
+ actually being used.
+ <at> param ExtraTxBufferSize The size, in bytes, of the extra transmit buffer space
+ that the driver should allocate for the network interface.
+ Some network interfaces will not be able to use the
+ extra buffer, and the caller will not know if it is
+ actually being used.
+
+ <at> retval EFI_SUCCESS The network interface was initialized.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_OUT_OF_RESOURCES There was not enough memory for the transmit and
+ receive buffers.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED The increased buffer size feature is not supported.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpInitialize (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINTN ExtraRxBufferSize OPTIONAL,
+ IN UINTN ExtraTxBufferSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpInitialize()\n"));
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpInitialize() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkStarted:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_ERROR_RESTORE_TPL;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ YukonDriver->SnpMode.MCastFilterCount = 0;
+ YukonDriver->SnpMode.ReceiveFilterSetting = 0;
+ gBS->SetMem (YukonDriver->SnpMode.MCastFilter, sizeof YukonDriver->SnpMode.MCastFilter, 0);
+ gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
+
+ Status = mskc_init (ScData->msk_if[YukonDriver->Port]);
+
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ YukonDriver->SnpMode.State = EfiSimpleNetworkInitialized;
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpInitialize() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Converts a multicast IP address to a multicast HW MAC address.
+
+ This function converts a multicast IP address to a multicast HW MAC address
+ for all packet transactions. If the mapping is accepted, then EFI_SUCCESS will
+ be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param IPv6 Set to TRUE if the multicast IP address is IPv6 [RFC 2460].
+ Set to FALSE if the multicast IP address is IPv4 [RFC 791].
+ <at> param IP The multicast IP address that is to be converted to a multicast
+ HW MAC address.
+ <at> param MAC The multicast HW MAC address that is to be generated from IP.
+
+ <at> retval EFI_SUCCESS The multicast IP address was mapped to the
+ multicast HW MAC address.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not
+ been started by calling Start().
+ <at> retval EFI_INVALID_PARAMETER IP is NULL.
+ <at> retval EFI_INVALID_PARAMETER MAC is NULL.
+ <at> retval EFI_INVALID_PARAMETER IP does not point to a valid IPv4 or IPv6
+ multicast address.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_UNSUPPORTED IPv6 is TRUE and the implementation does not
+ support IPv6 multicast to MAC address conversion.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpMcastIpToMac (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN IPv6,
+ IN EFI_IP_ADDRESS *IP,
+ OUT EFI_MAC_ADDRESS *MAC
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpMcastIpToMac()\n"));
+
+ //
+ // Get pointer to SNP driver instance for *this.
+ //
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (IP == NULL || MAC == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ Status = EFI_UNSUPPORTED;
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Performs read and write operations on the NVRAM device attached to a network
+ interface.
+
+ This function performs read and write operations on the NVRAM device attached
+ to a network interface. If ReadWrite is TRUE, a read operation is performed.
+ If ReadWrite is FALSE, a write operation is performed. Offset specifies the
+ byte offset at which to start either operation. Offset must be a multiple of
+ NvRamAccessSize , and it must have a value between zero and NvRamSize.
+ BufferSize specifies the length of the read or write operation. BufferSize must
+ also be a multiple of NvRamAccessSize, and Offset + BufferSize must not exceed
+ NvRamSize.
+ If any of the above conditions is not met, then EFI_INVALID_PARAMETER will be
+ returned.
+ If all the conditions are met and the operation is "read," the NVRAM device
+ attached to the network interface will be read into Buffer and EFI_SUCCESS
+ will be returned. If this is a write operation, the contents of Buffer will be
+ used to update the contents of the NVRAM device attached to the network
+ interface and EFI_SUCCESS will be returned.
+
+ It does the basic checking on the input parameters and retrieves snp structure
+ and then calls the read_nvdata() call which does the actual reading
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param ReadWrite TRUE for read operations, FALSE for write operations.
+ <at> param Offset Byte offset in the NVRAM device at which to start the read or
+ write operation. This must be a multiple of NvRamAccessSize
+ and less than NvRamSize. (See EFI_SIMPLE_NETWORK_MODE)
+ <at> param BufferSize The number of bytes to read or write from the NVRAM device.
+ This must also be a multiple of NvramAccessSize.
+ <at> param Buffer A pointer to the data buffer.
+
+ <at> retval EFI_SUCCESS The NVRAM access was performed.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * The This parameter is NULL
+ * The This parameter does not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure
+ * The Offset parameter is not a multiple of
+ EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
+ * The Offset parameter is not less than
+ EFI_SIMPLE_NETWORK_MODE.NvRamSize
+ * The BufferSize parameter is not a multiple of
+ EFI_SIMPLE_NETWORK_MODE.NvRamAccessSize
+ * The Buffer parameter is NULL
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network
+ interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpNvData (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN ReadWrite,
+ IN UINTN Offset,
+ IN UINTN BufferSize,
+ IN OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpNvData()\n"));
+ //
+ // Get pointer to SNP driver instance for *this.
+ //
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ //
+ // Return error if the SNP is not initialized.
+ //
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ case EfiSimpleNetworkStarted:
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+ //
+ // Return error if non-volatile memory variables are not valid.
+ //
+ if (YukonDriver->SnpMode.NvRamSize == 0 || YukonDriver->SnpMode.NvRamAccessSize == 0) {
+ Status = EFI_UNSUPPORTED;
+ goto ON_EXIT;
+ }
+ //
+ // Check for invalid parameter combinations.
+ //
+ if ((BufferSize == 0) ||
+ (Buffer == NULL) ||
+ (Offset >= YukonDriver->SnpMode.NvRamSize) ||
+ (Offset + BufferSize > YukonDriver->SnpMode.NvRamSize) ||
+ (BufferSize % YukonDriver->SnpMode.NvRamAccessSize != 0) ||
+ (Offset % YukonDriver->SnpMode.NvRamAccessSize != 0)
+ ) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Status = EFI_UNSUPPORTED;
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Receives a packet from a network interface.
+
+ This function retrieves one packet from the receive queue of a network interface.
+ If there are no packets on the receive queue, then EFI_NOT_READY will be
+ returned. If there is a packet on the receive queue, and the size of the packet
+ is smaller than BufferSize, then the contents of the packet will be placed in
+ Buffer, and BufferSize will be updated with the actual size of the packet.
+ In addition, if SrcAddr, DestAddr, and Protocol are not NULL, then these values
+ will be extracted from the media header and returned. EFI_SUCCESS will be
+ returned if a packet was successfully received.
+ If BufferSize is smaller than the received packet, then the size of the receive
+ packet will be placed in BufferSize and EFI_BUFFER_TOO_SMALL will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param HeaderSize The size, in bytes, of the media header received on the network
+ interface. If this parameter is NULL, then the media header size
+ will not be returned.
+ <at> param BufferSize On entry, the size, in bytes, of Buffer. On exit, the size, in
+ bytes, of the packet that was received on the network interface.
+ <at> param Buffer A pointer to the data buffer to receive both the media
+ header and the data.
+ <at> param SrcAddr The source HW MAC address. If this parameter is NULL, the HW
+ MAC source address will not be extracted from the media header.
+ <at> param DestAddr The destination HW MAC address. If this parameter is NULL,
+ the HW MAC destination address will not be extracted from
+ the media header.
+ <at> param Protocol The media header type. If this parameter is NULL, then the
+ protocol will not be extracted from the media header. See
+ RFC 1700 section "Ether Types" for examples.
+
+ <at> retval EFI_SUCCESS The received data was stored in Buffer, and
+ BufferSize has been updated to the number of
+ bytes received.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_NOT_READY No packets have been received on the network interface.
+ <at> retval EFI_BUFFER_TOO_SMALL BufferSize is too small for the received packets.
+ BufferSize has been updated to the required size.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * The This parameter is NULL
+ * The This parameter does not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ * The BufferSize parameter is NULL
+ * The Buffer parameter is NULL
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReceive (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ OUT UINTN *HeaderSize OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer,
+ OUT EFI_MAC_ADDRESS *SrcAddr OPTIONAL,
+ OUT EFI_MAC_ADDRESS *DestAddr OPTIONAL,
+ OUT UINT16 *Protocol OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *Snp;
+ EFI_TPL OldTpl;
+ struct msk_softc *ScData;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Snp = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (Snp->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (Snp->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ if ((BufferSize == NULL) || (Buffer == NULL)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ Status = mskc_receive (ScData->msk_if[Snp->Port], BufferSize, Buffer);
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_NOT_READY) {
+ goto ON_EXIT_NO_DEBUG;
+ }
+ } else {
+ // Extract header info
+ if (HeaderSize != NULL) {
+ *HeaderSize = sizeof (ETHER_HEAD);
+ }
+
+ if (SrcAddr != NULL) {
+ gBS->SetMem (SrcAddr, NET_ETHER_ADDR_LEN, 0);
+ gBS->CopyMem (SrcAddr, ((UINT8 *) Buffer) + NET_ETHER_ADDR_LEN, NET_ETHER_ADDR_LEN);
+ }
+
+ if (DestAddr != NULL) {
+ gBS->SetMem (DestAddr, NET_ETHER_ADDR_LEN, 0);
+ gBS->CopyMem (DestAddr, ((UINT8 *) Buffer), NET_ETHER_ADDR_LEN);
+ }
+
+ if (Protocol != NULL) {
+ *Protocol = NTOHS (*((UINT16 *) (((UINT8 *) Buffer) + (2 * NET_ETHER_ADDR_LEN))));
+ }
+ }
+
+ON_EXIT:
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpReceive() Status = %r\n", Status));
+
+ON_EXIT_NO_DEBUG:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Manages the multicast receive filters of a network interface.
+
+ This function is used enable and disable the hardware and software receive
+ filters for the underlying network device.
+ The receive filter change is broken down into three steps:
+ * The filter mask bits that are set (ON) in the Enable parameter are added to
+ the current receive filter settings.
+ * The filter mask bits that are set (ON) in the Disable parameter are subtracted
+ from the updated receive filter settings.
+ * If the resulting receive filter setting is not supported by the hardware a
+ more liberal setting is selected.
+ If the same bits are set in the Enable and Disable parameters, then the bits
+ in the Disable parameter takes precedence.
+ If the ResetMCastFilter parameter is TRUE, then the multicast address list
+ filter is disabled (irregardless of what other multicast bits are set in the
+ Enable and Disable parameters). The SNP->Mode->MCastFilterCount field is set
+ to zero. The Snp->Mode->MCastFilter contents are undefined.
+ After enabling or disabling receive filter settings, software should verify
+ the new settings by checking the Snp->Mode->ReceiveFilterSettings,
+ Snp->Mode->MCastFilterCount and Snp->Mode->MCastFilter fields.
+ Note: Some network drivers and/or devices will automatically promote receive
+ filter settings if the requested setting can not be honored. For example, if
+ a request for four multicast addresses is made and the underlying hardware
+ only supports two multicast addresses the driver might set the promiscuous
+ or promiscuous multicast receive filters instead. The receiving software is
+ responsible for discarding any extra packets that get through the hardware
+ receive filters.
+ Note: Note: To disable all receive filter hardware, the network driver must
+ be Shutdown() and Stopped(). Calling ReceiveFilters() with Disable set to
+ Snp->Mode->ReceiveFilterSettings will make it so no more packets are
+ returned by the Receive() function, but the receive hardware may still be
+ moving packets into system memory before inspecting and discarding them.
+ Unexpected system errors, reboots and hangs can occur if an OS is loaded
+ and the network devices are not Shutdown() and Stopped().
+ If ResetMCastFilter is TRUE, then the multicast receive filter list on the
+ network interface will be reset to the default multicast receive filter list.
+ If ResetMCastFilter is FALSE, and this network interface allows the multicast
+ receive filter list to be modified, then the MCastFilterCnt and MCastFilter
+ are used to update the current multicast receive filter list. The modified
+ receive filter list settings can be found in the MCastFilter field of
+ EFI_SIMPLE_NETWORK_MODE. If the network interface does not allow the multicast
+ receive filter list to be modified, then EFI_INVALID_PARAMETER will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+ If the receive filter mask and multicast receive filter list have been
+ successfully updated on the network interface, EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Enable A bit mask of receive filters to enable on the network
+ interface.
+ <at> param Disable A bit mask of receive filters to disable on the network
+ interface. For backward compatibility with EFI 1.1
+ platforms, the EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit
+ must be set when the ResetMCastFilter parameter is TRUE.
+ <at> param ResetMCastFilter Set to TRUE to reset the contents of the multicast
+ receive filters on the network interface to their
+ default values.
+ <at> param MCastFilterCnt Number of multicast HW MAC addresses in the new MCastFilter
+ list. This value must be less than or equal to the
+ MCastFilterCnt field of EFI_SIMPLE_NETWORK_MODE.
+ This field is optional if ResetMCastFilter is TRUE.
+ <at> param MCastFilter A pointer to a list of new multicast receive filter HW
+ MAC addresses. This list will replace any existing
+ multicast HW MAC address list. This field is optional
+ if ResetMCastFilter is TRUE.
+
+ <at> retval EFI_SUCCESS The multicast receive filter list was updated.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
+ * This is NULL
+ * There are bits set in Enable that are not set
+ in Snp->Mode->ReceiveFilterMask
+ * There are bits set in Disable that are not set
+ in Snp->Mode->ReceiveFilterMask
+ * Multicast is being enabled (the
+ EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST bit is
+ set in Enable, it is not set in Disable, and
+ ResetMCastFilter is FALSE) and MCastFilterCount
+ is zero
+ * Multicast is being enabled and MCastFilterCount
+ is greater than Snp->Mode->MaxMCastFilterCount
+ * Multicast is being enabled and MCastFilter is NULL
+ * Multicast is being enabled and one or more of
+ the addresses in the MCastFilter list are not
+ valid multicast MAC addresses
+ <at> retval EFI_DEVICE_ERROR One or more of the following conditions is TRUE:
+ * The network interface has been started but has
+ not been initialized
+ * An unexpected error was returned by the
+ underlying network driver or device
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReceiveFilters (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINT32 Enable,
+ IN UINT32 Disable,
+ IN BOOLEAN ResetMCastFilter,
+ IN UINTN MCastFilterCnt, OPTIONAL
+ IN EFI_MAC_ADDRESS *MCastFilter OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ UINT32 newReceiveFilter;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpReceiveFilters()\n"));
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpReceiveFilters() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_ERROR_RESTORE_TPL;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+ //
+ // check if we are asked to enable or disable something that the NIC
+ // does not even support!
+ //
+ newReceiveFilter = (YukonDriver->SnpMode.ReceiveFilterSetting | Enable) & ~Disable;
+ if ((newReceiveFilter & ~YukonDriver->SnpMode.ReceiveFilterMask) != 0) {
+ DEBUG ((DEBUG_NET,
+ "Marvell Yukon: SnpReceiveFilters() NIC does not support Enable = 0x%x, Disable = 0x%x\n", Enable, Disable));
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ if (ResetMCastFilter) {
+ newReceiveFilter &= ~(EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST & YukonDriver->SnpMode.ReceiveFilterMask);
+ MCastFilterCnt = 0;
+ MCastFilter = NULL;
+ } else {
+ if (MCastFilterCnt != 0) {
+ if ((MCastFilterCnt > YukonDriver->SnpMode.MaxMCastFilterCount) ||
+ (MCastFilter == NULL)) {
+
+ DEBUG ((DEBUG_NET,
+ "Marvell Yukon: SnpReceiveFilters() NIC does not support MCastFilterCnt = %d (Max = %d)\n",
+ MCastFilterCnt, YukonDriver->SnpMode.MaxMCastFilterCount));
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+ }
+ }
+
+ if (newReceiveFilter == YukonDriver->SnpMode.ReceiveFilterSetting && !ResetMCastFilter && MCastFilterCnt == 0) {
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+ }
+
+ if ((Enable & EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST) != 0 && MCastFilterCnt == 0) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ YukonDriver->SnpMode.ReceiveFilterSetting = newReceiveFilter;
+ mskc_rxfilter (ScData->msk_if[YukonDriver->Port], YukonDriver->SnpMode.ReceiveFilterSetting,
+ MCastFilterCnt, MCastFilter);
+
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpReceiveFilters() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Resets a network adapter and reinitializes it with the parameters that were
+ provided in the previous call to Initialize().
+
+ This function resets a network adapter and reinitializes it with the parameters
+ that were provided in the previous call to Initialize(). The transmit and
+ receive queues are emptied and all pending interrupts are cleared.
+ Receive filters, the station address, the statistics, and the multicast-IP-to-HW
+ MAC addresses are not reset by this call. If the network interface was
+ successfully reset, then EFI_SUCCESS will be returned. If the driver has not
+ been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param ExtendedVerification Indicates that the driver may perform a more
+ exhaustive verification operation of the device
+ during reset.
+
+ <at> retval EFI_SUCCESS The network interface was reset.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER One or more of the parameters has an unsupported value.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpReset (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN ExtendedVerification
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpReset()\n"));
+ //
+ // Resolve Warning 4 unreferenced parameter problem
+ //
+ ExtendedVerification = 0;
+ DEBUG ((DEBUG_WARN, "Marvell Yukon: ExtendedVerification = %d is not implemented!\n", ExtendedVerification));
+
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpReset() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_ERROR_RESTORE_TPL;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ // Always succeeds
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpReset() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Resets a network adapter and leaves it in a state that is safe for another
+ driver to initialize.
+
+ This function releases the memory buffers assigned in the Initialize() call.
+ Pending transmits and receives are lost, and interrupts are cleared and disabled.
+ After this call, only the Initialize() and Stop() calls may be used. If the
+ network interface was successfully shutdown, then EFI_SUCCESS will be returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> retval EFI_SUCCESS The network interface was shutdown.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpShutdown (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpShutdown()\n"));
+ //
+ // Get pointer to SNP driver instance for *This.
+ //
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpShutdown() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ //
+ // Return error if the SNP is not initialized.
+ //
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_ERROR_RESTORE_TPL;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ mskc_stop_if (ScData->msk_if[YukonDriver->Port]);
+ YukonDriver->SnpMode.State = EfiSimpleNetworkStarted;
+ Status = EFI_SUCCESS;
+
+ YukonDriver->SnpMode.State = EfiSimpleNetworkStarted;
+ YukonDriver->SnpMode.ReceiveFilterSetting = 0;
+
+ YukonDriver->SnpMode.MCastFilterCount = 0;
+ YukonDriver->SnpMode.ReceiveFilterSetting = 0;
+ gBS->SetMem (YukonDriver->SnpMode.MCastFilter, sizeof YukonDriver->SnpMode.MCastFilter, 0);
+ gBS->CopyMem (
+ &YukonDriver->SnpMode.CurrentAddress,
+ &YukonDriver->SnpMode.PermanentAddress,
+ sizeof (EFI_MAC_ADDRESS)
+ );
+
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpShutdown() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Change the state of a network interface from "stopped" to "started."
+
+ This function starts a network interface. If the network interface successfully
+ starts, then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+
+ <at> retval EFI_SUCCESS The network interface was started.
+ <at> retval EFI_ALREADY_STARTED The network interface is already in the started state.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a valid
+ EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStart (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ )
+{
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ EFI_STATUS Status;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpStart()\n"));
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpStart() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkStopped:
+ break;
+
+ case EfiSimpleNetworkStarted:
+ case EfiSimpleNetworkInitialized:
+ Status = EFI_ALREADY_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ Status = mskc_attach_if (ScData->msk_if[YukonDriver->Port], YukonDriver->Port);
+
+ if (EFI_ERROR (Status)) {
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ YukonDriver->SnpMode.State = EfiSimpleNetworkStarted;
+ gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
+ YukonDriver->SnpMode.MCastFilterCount = 0;
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpStart() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Modifies or resets the current station address, if supported.
+
+ This function modifies or resets the current station address of a network
+ interface, if supported. If Reset is TRUE, then the current station address is
+ set to the network interface's permanent address. If Reset is FALSE, and the
+ network interface allows its station address to be modified, then the current
+ station address is changed to the address specified by New. If the network
+ interface does not allow its station address to be modified, then
+ EFI_INVALID_PARAMETER will be returned. If the station address is successfully
+ updated on the network interface, EFI_SUCCESS will be returned. If the driver
+ has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Reset Flag used to reset the station address to the network interface's
+ permanent address.
+ <at> param New New station address to be used for the network interface.
+
+
+ <at> retval EFI_SUCCESS The network interface's station address was updated.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
+ started by calling Start().
+ <at> retval EFI_INVALID_PARAMETER The New station address was not accepted by the NIC.
+ <at> retval EFI_INVALID_PARAMETER Reset is FALSE and New is NULL.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_DEVICE_ERROR An error occurred attempting to set the new
+ station address.
+ <at> retval EFI_UNSUPPORTED The NIC does not support changing the network
+ interface's station address.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStationAddress (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN Reset,
+ IN EFI_MAC_ADDRESS *New OPTIONAL
+ )
+{
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ EFI_STATUS Status;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpStationAddress()\n"));
+ //
+ // Check for invalid parameter combinations.
+ //
+ if ((This == NULL) || (!Reset && (New == NULL))) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ //
+ // Return error if the SNP is not initialized.
+ //
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ Status = EFI_UNSUPPORTED;
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Resets or collects the statistics on a network interface.
+
+ This function resets or collects the statistics on a network interface. If the
+ size of the statistics table specified by StatisticsSize is not big enough for
+ all the statistics that are collected by the network interface, then a partial
+ buffer of statistics is returned in StatisticsTable, StatisticsSize is set to
+ the size required to collect all the available statistics, and
+ EFI_BUFFER_TOO_SMALL is returned.
+ If StatisticsSize is big enough for all the statistics, then StatisticsTable
+ will be filled, StatisticsSize will be set to the size of the returned
+ StatisticsTable structure, and EFI_SUCCESS is returned.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+ If Reset is FALSE, and both StatisticsSize and StatisticsTable are NULL, then
+ no operations will be performed, and EFI_SUCCESS will be returned.
+ If Reset is TRUE, then all of the supported statistics counters on this network
+ interface will be reset to zero.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param Reset Set to TRUE to reset the statistics for the network interface.
+ <at> param StatisticsSize On input the size, in bytes, of StatisticsTable. On output
+ the size, in bytes, of the resulting table of statistics.
+ <at> param StatisticsTable A pointer to the EFI_NETWORK_STATISTICS structure that
+ contains the statistics. Type EFI_NETWORK_STATISTICS is
+ defined in "Related Definitions" below.
+
+ <at> retval EFI_SUCCESS The requested operation succeeded.
+ <at> retval EFI_NOT_STARTED The Simple Network Protocol interface has not been
+ started by calling Start().
+ <at> retval EFI_BUFFER_TOO_SMALL StatisticsSize is not NULL and StatisticsTable is
+ NULL. The current buffer size that is needed to
+ hold all the statistics is returned in StatisticsSize.
+ <at> retval EFI_BUFFER_TOO_SMALL StatisticsSize is not NULL and StatisticsTable is
+ not NULL. The current buffer size that is needed
+ to hold all the statistics is returned in
+ StatisticsSize. A partial set of statistics is
+ returned in StatisticsTable.
+ <at> retval EFI_INVALID_PARAMETER StatisticsSize is NULL and StatisticsTable is not
+ NULL.
+ <at> retval EFI_DEVICE_ERROR The Simple Network Protocol interface has not
+ been initialized by calling Initialize().
+ <at> retval EFI_DEVICE_ERROR An error was encountered collecting statistics
+ from the NIC.
+ <at> retval EFI_UNSUPPORTED The NIC does not support collecting statistics
+ from the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStatistics (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN BOOLEAN Reset,
+ IN OUT UINTN *StatisticsSize, OPTIONAL
+ IN OUT EFI_NETWORK_STATISTICS *StatisticsTable OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpStatistics()\n"));
+ //
+ // Get pointer to SNP driver instance for *This.
+ //
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Status = EFI_SUCCESS;
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ //
+ // Return error if the SNP is not initialized.
+ //
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ case EfiSimpleNetworkStarted:
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ //
+ // Error Checking
+ //
+
+ if (!Reset && (StatisticsSize == NULL) && (StatisticsTable == NULL)) {
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+ }
+
+ if ((StatisticsSize == NULL) && (StatisticsTable != NULL)) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ if ((StatisticsSize != NULL) && (StatisticsTable == NULL)) {
+ *StatisticsSize = sizeof (EFI_NETWORK_STATISTICS);
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto ON_EXIT;
+ }
+
+ if ((StatisticsSize != NULL) && (StatisticsTable != NULL)) {
+ if (*StatisticsSize < sizeof (EFI_NETWORK_STATISTICS)) {
+ if (*StatisticsSize == 0) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ // Note: From here on, the Status value must be preserved.
+ } else {
+ // FixMe: Return partial statistics for the available size and also set
+ // Status = EFI_BUFFER_TOO_SMALL;
+ // but for now it is unsupported.
+ Status = EFI_UNSUPPORTED;
+ // Note: From here on, the Status value must be preserved.
+ }
+ *StatisticsSize = sizeof (EFI_NETWORK_STATISTICS);
+ } else {
+ // FixMe: Return full statistics and also set
+ // Status = EFI_SUCCESS;
+ // but for now it is unsupported.
+ Status = EFI_UNSUPPORTED;
+ }
+ }
+
+ if (Reset == TRUE) {
+ // FixMe: Reset all statistics;
+
+ // Preserve any previous errors else return success.
+ if (!EFI_ERROR (Status)) {
+ // FixMe: Should return success
+ // Status = EFI_SUCCESS;
+ // but for now it is unsupported.
+ Status = EFI_UNSUPPORTED;
+ }
+ }
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
+/**
+ Changes the state of a network interface from "started" to "stopped."
+
+ This function stops a network interface. This call is only valid if the network
+ interface is in the started state. If the network interface was successfully
+ stopped, then EFI_SUCCESS will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL
+ instance.
+
+
+ <at> retval EFI_SUCCESS The network interface was stopped.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_INVALID_PARAMETER This parameter was NULL or did not point to a
+ valid EFI_SIMPLE_NETWORK_PROTOCOL structure.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network
+ interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network
+ interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpStop (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpStop()\n"));
+ if (This == NULL) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpStop() failed with Status = %r\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkStarted:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_ERROR_RESTORE_TPL;
+
+ case EfiSimpleNetworkInitialized:
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_ERROR_RESTORE_TPL;
+ }
+
+ mskc_detach_if (ScData->msk_if[YukonDriver->Port]);
+ YukonDriver->SnpMode.State = EfiSimpleNetworkStopped;
+ gBS->SetMem (&YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS), 0);
+ Status = EFI_SUCCESS;
+ goto ON_EXIT;
+
+ON_ERROR_RESTORE_TPL:
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: SnpStop() failed with Status = %r\n", Status));
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+ return Status;
+}
+
+/**
+ Places a packet in the transmit queue of a network interface.
+
+ This function places the packet specified by Header and Buffer on the transmit
+ queue. If HeaderSize is nonzero and HeaderSize is not equal to
+ This->SnpMode->MediaHeaderSize, then EFI_INVALID_PARAMETER will be returned. If
+ BufferSize is less than This->SnpMode->MediaHeaderSize, then EFI_BUFFER_TOO_SMALL
+ will be returned. If Buffer is NULL, then EFI_INVALID_PARAMETER will be
+ returned. If HeaderSize is nonzero and DestAddr or Protocol is NULL, then
+ EFI_INVALID_PARAMETER will be returned. If the transmit engine of the network
+ interface is busy, then EFI_NOT_READY will be returned. If this packet can be
+ accepted by the transmit engine of the network interface, the packet contents
+ specified by Buffer will be placed on the transmit queue of the network
+ interface, and EFI_SUCCESS will be returned. GetStatus() can be used to
+ determine when the packet has actually been transmitted. The contents of the
+ Buffer must not be modified until the packet has actually been transmitted.
+ The Transmit() function performs nonblocking I/O. A caller who wants to perform
+ blocking I/O, should call Transmit(), and then GetStatus() until the
+ transmitted buffer shows up in the recycled transmit buffer.
+ If the driver has not been initialized, EFI_DEVICE_ERROR will be returned.
+
+ <at> param This A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.
+ <at> param HeaderSize The size, in bytes, of the media header to be filled in by the
+ Transmit() function. If HeaderSize is nonzero, then it must
+ be equal to This->SnpMode->MediaHeaderSize and the DestAddr and
+ Protocol parameters must not be NULL.
+ <at> param BufferSize The size, in bytes, of the entire packet (media header and
+ data) to be transmitted through the network interface.
+ <at> param Buffer A pointer to the packet (media header followed by data) to be
+ transmitted. This parameter cannot be NULL. If HeaderSize is
+ zero, then the media header in Buffer must already be filled
+ in by the caller. If HeaderSize is nonzero, then the media
+ header will be filled in by the Transmit() function.
+ <at> param SrcAddr The source HW MAC address. If HeaderSize is zero, then this
+ parameter is ignored. If HeaderSize is nonzero and SrcAddr
+ is NULL, then This->SnpMode->CurrentAddress is used for the
+ source HW MAC address.
+ <at> param DestAddr The destination HW MAC address. If HeaderSize is zero, then
+ this parameter is ignored.
+ <at> param Protocol The type of header to build. If HeaderSize is zero, then this
+ parameter is ignored. See RFC 1700, section "Ether Types,"
+ for examples.
+
+ <at> retval EFI_SUCCESS The packet was placed on the transmit queue.
+ <at> retval EFI_NOT_STARTED The network interface has not been started.
+ <at> retval EFI_NOT_READY The network interface is too busy to accept this
+ transmit request.
+ <at> retval EFI_BUFFER_TOO_SMALL The BufferSize parameter is too small.
+ <at> retval EFI_INVALID_PARAMETER One or more of the parameters has an unsupported
+ value.
+ <at> retval EFI_DEVICE_ERROR The command could not be sent to the network interface.
+ <at> retval EFI_UNSUPPORTED This function is not supported by the network interface.
+
+**/
+EFI_STATUS
+EFIAPI
+SnpTransmit (
+ IN EFI_SIMPLE_NETWORK_PROTOCOL *This,
+ IN UINTN HeaderSize,
+ IN UINTN BufferSize,
+ IN VOID *Buffer,
+ IN EFI_MAC_ADDRESS *SrcAddr, OPTIONAL
+ IN EFI_MAC_ADDRESS *DestAddr, OPTIONAL
+ IN UINT16 *Protocol OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ YUKON_DRIVER *YukonDriver;
+ EFI_TPL OldTpl;
+ ETHER_HEAD *Frame;
+ UINT16 ProtocolNet;
+ struct msk_softc *ScData;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: SnpTransmit()\n"));
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+
+ if (YukonDriver == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ Status = MarvellYukonGetControllerData (YukonDriver->Controller, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
+
+ switch (YukonDriver->SnpMode.State) {
+ case EfiSimpleNetworkInitialized:
+ break;
+
+ case EfiSimpleNetworkStopped:
+ Status = EFI_NOT_STARTED;
+ goto ON_EXIT;
+
+ default:
+ Status = EFI_DEVICE_ERROR;
+ goto ON_EXIT;
+ }
+
+ if (Buffer == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+
+ if (BufferSize < YukonDriver->SnpMode.MediaHeaderSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ goto ON_EXIT;
+ }
+
+ //
+ // Construct the frame header if not already presented
+ //
+ if (HeaderSize != 0) {
+ if (HeaderSize != YukonDriver->SnpMode.MediaHeaderSize || DestAddr == 0 || Protocol == 0) {
+ Status = EFI_INVALID_PARAMETER;
+ goto ON_EXIT;
+ }
+ Frame = (ETHER_HEAD*)Buffer;
+ ProtocolNet = NTOHS (*Protocol);
+
+ gBS->CopyMem (Frame->SrcMac, SrcAddr, NET_ETHER_ADDR_LEN);
+ gBS->CopyMem (Frame->DstMac, DestAddr, NET_ETHER_ADDR_LEN);
+ gBS->CopyMem (&Frame->EtherType, &ProtocolNet, sizeof (UINT16));
+ }
+
+ Status = mskc_transmit (ScData->msk_if[YukonDriver->Port], BufferSize, Buffer);
+
+ON_EXIT:
+ gBS->RestoreTPL (OldTpl);
+
+ return Status;
+}
+
diff --git a/OptionRomPkg/MarvellYukonDxe/e1000phy.c b/OptionRomPkg/MarvellYukonDxe/e1000phy.c
new file mode 100644
index 0000000000..f9cda846de
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/e1000phy.c
@@ -0,0 +1,622 @@
+/** <at> file
+* Support for Marvell 88E1000 Series PHYs
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+* Copyright (c) 2017, Linaro Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+/*-
+ * Principal Author: Parag Patel
+ * Copyright (c) 2001
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice unmodified, this list of conditions, and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Additonal Copyright (c) 2001 by Traakan Software under same licence.
+ * Secondary Author: Matthew Jacob
+ */
+
+/*
+ * driver for the Marvell 88E1000 series external 1000/100/10-BT PHY.
+ */
+
+/*
+ * Support added for the Marvell 88E1011 (Alaska) 1000/100/10baseTX and
+ * 1000baseSX PHY.
+ * Nathan Binkert <nate <at> openbsd.org>
+ * Jung-uk Kim <jkim <at> niksun.com>
+ */
+
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include "if_media.h"
+
+#include "miivar.h"
+
+#include "e1000phyreg.h"
+
+static EFI_STATUS e1000phy_probe (const struct mii_attach_args *ma);
+STATIC VOID e1000phy_attach (struct e1000phy_softc *, const struct mii_attach_args *ma);
+STATIC VOID e1000phy_service (struct e1000phy_softc *, INTN);
+STATIC VOID e1000phy_status (struct e1000phy_softc *);
+STATIC VOID e1000phy_reset (struct e1000phy_softc *);
+STATIC VOID e1000phy_mii_phy_auto (struct e1000phy_softc *);
+
+INTN msk_phy_readreg (VOID *, INTN);
+INTN msk_phy_writereg (VOID *, INTN, INTN);
+VOID msk_miibus_statchg (VOID *);
+
+static const struct mii_phydesc * mii_phy_match (const struct mii_attach_args *ma,
+ const struct mii_phydesc *mpd);
+static const struct mii_phydesc * mii_phy_match_gen (const struct mii_attach_args *ma,
+ const struct mii_phydesc *mpd, UINTN endlen);
+static EFI_STATUS mii_phy_dev_probe (const struct mii_attach_args *ma, const struct mii_phydesc *mpd);
+STATIC VOID mii_phy_update (struct e1000phy_softc *, INTN);
+
+static const struct mii_phydesc e1000phys[] = {
+ MII_PHY_DESC (MARVELL, E1000),
+ MII_PHY_DESC (MARVELL, E1011),
+ MII_PHY_DESC (MARVELL, E1000_3),
+ MII_PHY_DESC (MARVELL, E1000S),
+ MII_PHY_DESC (MARVELL, E1000_5),
+ MII_PHY_DESC (MARVELL, E1000_6),
+ MII_PHY_DESC (MARVELL, E3082),
+ MII_PHY_DESC (MARVELL, E1112),
+ MII_PHY_DESC (MARVELL, E1149),
+ MII_PHY_DESC (MARVELL, E1111),
+ MII_PHY_DESC (MARVELL, E1116),
+ MII_PHY_DESC (MARVELL, E1116R),
+ MII_PHY_DESC (MARVELL, E1118),
+ MII_PHY_DESC (MARVELL, E3016),
+ MII_PHY_DESC (MARVELL, PHYG65G),
+ MII_PHY_DESC (xxMARVELL, E1000),
+ MII_PHY_DESC (xxMARVELL, E1011),
+ MII_PHY_DESC (xxMARVELL, E1000_3),
+ MII_PHY_DESC (xxMARVELL, E1000_5),
+ MII_PHY_DESC (xxMARVELL, E1111),
+ MII_PHY_END
+};
+
+EFI_STATUS
+e1000_probe_and_attach (
+ struct mii_data *mii,
+ const struct msk_mii_data *mmd,
+ VOID *sc_if,
+ VOID **rsc_phy
+ )
+{
+ struct mii_attach_args ma;
+ INTN bmsr;
+ EFI_STATUS Status;
+ struct e1000phy_softc *sc_phy;
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (struct e1000phy_softc),
+ (VOID**) &sc_phy);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ gBS->SetMem (sc_phy, sizeof (struct e1000phy_softc), 0);
+ sc_phy->mmd = mmd;
+
+ sc_phy->sc_if = sc_if;
+
+ /*
+ * Check to see if there is a PHY at this address. Note,
+ * many braindead PHYs report 0/0 in their ID registers,
+ * so we test for media in the BMSR.
+ */
+ bmsr = PHY_READ (sc_phy, E1000_SR);
+ if (bmsr == 0 || bmsr == 0xffff || (bmsr & (E1000_SR_EXTENDED_STATUS|E1000_SR_MEDIAMASK)) == 0) {
+ /* Assume no PHY at this address. */
+ gBS->FreePool (sc_phy);
+ return EFI_DEVICE_ERROR;
+ }
+
+ /*
+ * Extract the IDs.
+ */
+ ma.mii_id1 = PHY_READ (sc_phy, E1000_ID1);
+ ma.mii_id2 = PHY_READ (sc_phy, E1000_ID2);
+
+ ma.mii_data = mii;
+
+ Status = e1000phy_probe (&ma);
+ if (EFI_ERROR (Status)) {
+ gBS->FreePool (sc_phy);
+ return Status;
+ }
+
+ e1000phy_attach (sc_phy, &ma);
+
+ *rsc_phy = sc_phy;
+
+ return EFI_SUCCESS;
+}
+
+VOID
+e1000phy_detach (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ if (sc_phy != NULL) {
+ gBS->FreePool (sc_phy);
+ }
+}
+
+EFI_STATUS
+e1000phy_probe (
+ const struct mii_attach_args *ma
+ )
+{
+ return (mii_phy_dev_probe (ma, e1000phys));
+}
+
+static void
+e1000phy_attach (
+ struct e1000phy_softc *sc_phy,
+ const struct mii_attach_args *ma
+ )
+{
+ struct mii_softc *sc;
+
+ sc = &sc_phy->mii_sc;
+ sc->mii_pdata = ma->mii_data;
+ sc->mii_anegticks = MII_ANEGTICKS_GIGE;
+
+ sc_phy->mii_model = MII_MODEL (ma->mii_id2);
+
+ if (sc_phy->mmd != NULL && (sc_phy->mmd->mii_flags & MIIF_HAVEFIBER) != 0) {
+ sc->mii_flags |= MIIF_HAVEFIBER;
+ }
+
+ switch (sc_phy->mii_model) {
+ case MII_MODEL_MARVELL_E1011:
+ case MII_MODEL_MARVELL_E1112:
+ if (PHY_READ (sc_phy, E1000_ESSR) & E1000_ESSR_FIBER_LINK) {
+ sc->mii_flags |= MIIF_HAVEFIBER;
+ }
+ break;
+ case MII_MODEL_MARVELL_E1149:
+ /*
+ * Some 88E1149 PHY's page select is initialized to
+ * point to other bank instead of copper/fiber bank
+ * which in turn resulted in wrong registers were
+ * accessed during PHY operation. It is believed that
+ * page 0 should be used for copper PHY so reinitialize
+ * E1000_EADR to select default copper PHY. If parent
+ * device know the type of PHY(either copper or fiber),
+ * that information should be used to select default
+ * type of PHY.
+ */
+ PHY_WRITE (sc_phy, E1000_EADR, 0);
+ break;
+ }
+
+ e1000phy_reset (sc_phy);
+
+ sc->mii_capabilities = PHY_READ (sc_phy, E1000_SR) & 0xFFFFFFFF;
+ if (sc->mii_capabilities & E1000_SR_EXTENDED_STATUS) {
+ sc->mii_extcapabilities = PHY_READ (sc_phy, E1000_ESR);
+ }
+}
+
+static void
+e1000phy_reset (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ UINT16 reg;
+ UINT16 page;
+ struct mii_softc *sc;
+
+ sc = &sc_phy->mii_sc;
+
+ reg = PHY_READ (sc_phy, E1000_SCR);
+ if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) {
+ reg &= ~E1000_SCR_AUTO_X_MODE;
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1112) {
+ // Select 1000BASE-X only mode.
+ page = PHY_READ (sc_phy, E1000_EADR);
+ PHY_WRITE (sc_phy, E1000_EADR, 2);
+ reg = PHY_READ (sc_phy, E1000_SCR);
+ reg &= ~E1000_SCR_MODE_MASK;
+ reg |= E1000_SCR_MODE_1000BX;
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ if (sc_phy->mmd != NULL && sc_phy->mmd->pmd == 'P') {
+ // Set SIGDET polarity low for SFP module
+ PHY_WRITE (sc_phy, E1000_EADR, 1);
+ reg = PHY_READ (sc_phy, E1000_SCR);
+ reg |= E1000_SCR_FIB_SIGDET_POLARITY;
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ }
+ PHY_WRITE (sc_phy, E1000_EADR, page);
+ }
+ } else {
+ switch (sc_phy->mii_model) {
+ case MII_MODEL_MARVELL_E1111:
+ case MII_MODEL_MARVELL_E1112:
+ case MII_MODEL_MARVELL_E1116:
+ case MII_MODEL_MARVELL_E1118:
+ case MII_MODEL_MARVELL_E1149:
+ case MII_MODEL_MARVELL_PHYG65G:
+ // Disable energy detect mode
+ reg &= ~E1000_SCR_EN_DETECT_MASK;
+ reg |= E1000_SCR_AUTO_X_MODE;
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116)
+ reg &= ~E1000_SCR_POWER_DOWN;
+ reg |= E1000_SCR_ASSERT_CRS_ON_TX;
+ break;
+ case MII_MODEL_MARVELL_E3082:
+ reg |= (E1000_SCR_AUTO_X_MODE >> 1);
+ reg |= E1000_SCR_ASSERT_CRS_ON_TX;
+ break;
+ case MII_MODEL_MARVELL_E3016:
+ reg |= E1000_SCR_AUTO_MDIX;
+ reg &= ~(E1000_SCR_EN_DETECT |
+ E1000_SCR_SCRAMBLER_DISABLE);
+ reg |= E1000_SCR_LPNP;
+ // XXX Enable class A driver for Yukon FE+ A0
+ PHY_WRITE (sc_phy, 0x1C, PHY_READ (sc_phy, 0x1C) | 0x0001);
+ break;
+ default:
+ reg &= ~E1000_SCR_AUTO_X_MODE;
+ reg |= E1000_SCR_ASSERT_CRS_ON_TX;
+ break;
+ }
+ if (sc_phy->mii_model != MII_MODEL_MARVELL_E3016) {
+ /* Auto correction for reversed cable polarity. */
+ reg &= ~E1000_SCR_POLARITY_REVERSAL;
+ }
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116 ||
+ sc_phy->mii_model == MII_MODEL_MARVELL_E1149) {
+ PHY_WRITE (sc_phy, E1000_EADR, 2);
+ reg = PHY_READ (sc_phy, E1000_SCR);
+ reg |= E1000_SCR_RGMII_POWER_UP;
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ PHY_WRITE (sc_phy, E1000_EADR, 0);
+ }
+ }
+
+ switch (sc_phy->mii_model) {
+ case MII_MODEL_MARVELL_E3082:
+ case MII_MODEL_MARVELL_E1112:
+ case MII_MODEL_MARVELL_E1118:
+ break;
+ case MII_MODEL_MARVELL_E1116:
+ page = PHY_READ (sc_phy, E1000_EADR);
+ /* Select page 3, LED control register. */
+ PHY_WRITE (sc_phy, E1000_EADR, 3);
+ PHY_WRITE (sc_phy, E1000_SCR,
+ E1000_SCR_LED_LOS (1) | /* Link/Act */
+ E1000_SCR_LED_INIT (8) | /* 10Mbps */
+ E1000_SCR_LED_STAT1 (7) | /* 100Mbps */
+ E1000_SCR_LED_STAT0 (7)); /* 1000Mbps */
+ /* Set blink rate. */
+ PHY_WRITE (sc_phy, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS));
+ PHY_WRITE (sc_phy, E1000_EADR, page);
+ break;
+ case MII_MODEL_MARVELL_E3016:
+ /* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */
+ PHY_WRITE (sc_phy, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04);
+ /* Integrated register calibration workaround. */
+ PHY_WRITE (sc_phy, 0x1D, 17);
+ PHY_WRITE (sc_phy, 0x1E, 0x3F60);
+ break;
+ default:
+ /* Force TX_CLK to 25MHz clock. */
+ reg = PHY_READ (sc_phy, E1000_ESCR);
+ reg |= E1000_ESCR_TX_CLK_25;
+ PHY_WRITE (sc_phy, E1000_ESCR, reg);
+ break;
+ }
+
+ /* Reset the PHY so all changes take effect. */
+ reg = PHY_READ (sc_phy, E1000_CR);
+ reg |= E1000_CR_RESET;
+ PHY_WRITE (sc_phy, E1000_CR, reg);
+}
+
+static void
+mii_phy_update (
+ struct e1000phy_softc *sc_phy,
+ INTN cmd
+ )
+{
+ struct mii_softc *sc = &sc_phy->mii_sc;
+ struct mii_data *mii = sc->mii_pdata;
+
+ if (sc->mii_media_active != mii->mii_media_active ||
+ sc->mii_media_status != mii->mii_media_status ||
+ cmd == MII_MEDIACHG)
+ {
+ msk_miibus_statchg (sc_phy->sc_if);
+ sc->mii_media_active = mii->mii_media_active;
+ sc->mii_media_status = mii->mii_media_status;
+ }
+}
+
+void
+e1000phy_tick (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ e1000phy_service (sc_phy, MII_TICK);
+}
+
+void
+e1000phy_mediachg (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ struct mii_data *mii;
+
+ mii = sc_phy->mii_sc.mii_pdata;
+
+ mii->mii_media_status = 0;
+ mii->mii_media_active = IFM_NONE;
+ e1000phy_service (sc_phy, MII_MEDIACHG);
+}
+
+static void
+e1000phy_service (
+ struct e1000phy_softc *sc_phy,
+ INTN cmd
+ )
+{
+ struct mii_softc *sc;
+ INTN reg;
+
+ sc = &sc_phy->mii_sc;
+
+ switch (cmd) {
+ case MII_POLLSTAT:
+ break;
+
+ case MII_MEDIACHG:
+ //
+ // Always try to auto-negotiate
+ //
+ e1000phy_mii_phy_auto (sc_phy);
+ break;
+
+ case MII_TICK:
+ /*
+ * check for link.
+ * Read the status register twice; Link Status is latch-low.
+ */
+ reg = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR);
+ if (reg & E1000_SR_LINK_STATUS) {
+ sc->mii_ticks = 0;
+ break;
+ }
+
+ /* Announce link loss right after it happens. */
+ if (sc->mii_ticks++ == 0) {
+ break;
+ }
+ if (sc->mii_ticks <= sc->mii_anegticks) {
+ break;
+ }
+
+ //
+ // Restart the auto-negotiation
+ //
+ sc->mii_ticks = 0;
+ e1000phy_reset (sc_phy);
+ e1000phy_mii_phy_auto (sc_phy);
+ break;
+ }
+
+ /* Update the media status. */
+ e1000phy_status (sc_phy);
+
+ /* Callback if something changed. */
+ mii_phy_update (sc_phy, cmd);
+}
+
+static void
+e1000phy_status (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ struct mii_softc *sc;
+ struct mii_data *mii;
+ INTN bmcr;
+ INTN bmsr;
+ INTN gsr;
+ INTN ssr;
+ INTN ar;
+ INTN lpar;
+
+ sc = &sc_phy->mii_sc;
+ mii = sc->mii_pdata;
+
+ mii->mii_media_status = IFM_AVALID;
+ mii->mii_media_active = IFM_ETHER;
+
+ bmsr = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR);
+ bmcr = PHY_READ (sc_phy, E1000_CR);
+ ssr = PHY_READ (sc_phy, E1000_SSR);
+
+ if (bmsr & E1000_SR_LINK_STATUS) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: e1000phy_status, link up\n"));
+ mii->mii_media_status |= IFM_ACTIVE;
+ }
+
+ if (bmcr & E1000_CR_LOOPBACK) {
+ mii->mii_media_active |= IFM_LOOP;
+ }
+
+ if ((bmcr & E1000_CR_AUTO_NEG_ENABLE) != 0 && (ssr & E1000_SSR_SPD_DPLX_RESOLVED) == 0) {
+ /* Erg, still trying, I guess... */
+ DEBUG ((DEBUG_NET, "Marvell Yukon: e1000phy_status, auto negotiation not complete\n"));
+ mii->mii_media_active |= IFM_NONE;
+ return;
+ }
+
+ if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
+ switch (ssr & E1000_SSR_SPEED) {
+ case E1000_SSR_1000MBS:
+ mii->mii_media_active |= IFM_1000_T;
+ break;
+ case E1000_SSR_100MBS:
+ mii->mii_media_active |= IFM_100_TX;
+ break;
+ case E1000_SSR_10MBS:
+ mii->mii_media_active |= IFM_10_T;
+ break;
+ default:
+ mii->mii_media_active |= IFM_NONE;
+ return;
+ }
+ } else {
+ /*
+ * Some fiber PHY(88E1112) does not seem to set resolved
+ * speed so always assume we've got IFM_1000_SX.
+ */
+ mii->mii_media_active |= IFM_1000_SX;
+ }
+
+ if (ssr & E1000_SSR_DUPLEX) {
+ mii->mii_media_active |= IFM_FDX;
+ } else {
+ mii->mii_media_active |= IFM_HDX;
+ }
+
+ if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
+ ar = PHY_READ (sc_phy, E1000_AR);
+ lpar = PHY_READ (sc_phy, E1000_LPAR);
+ /* FLAG0==rx-flow-control FLAG1==tx-flow-control */
+ if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) {
+ mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1;
+ } else if (!(ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) &&
+ (lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) {
+ mii->mii_media_active |= IFM_FLAG1;
+ } else if ((ar & E1000_AR_PAUSE) && (ar & E1000_AR_ASM_DIR) &&
+ !(lpar & E1000_LPAR_PAUSE) && (lpar & E1000_LPAR_ASM_DIR)) {
+ mii->mii_media_active |= IFM_FLAG0;
+ }
+ }
+
+ /* FLAG2 : local PHY resolved to MASTER */
+ if ((IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_T) ||
+ (IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_SX)) {
+ PHY_READ (sc_phy, E1000_1GSR);
+ gsr = PHY_READ (sc_phy, E1000_1GSR);
+ if ((gsr & E1000_1GSR_MS_CONFIG_RES) != 0) {
+ mii->mii_media_active |= IFM_FLAG2;
+ }
+ }
+}
+
+static void
+e1000phy_mii_phy_auto (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ struct mii_softc *sc;
+ UINT16 reg;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: e1000phy_mii_phy_auto negotiation started\n"));
+ sc = &sc_phy->mii_sc;
+ if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
+ reg = PHY_READ (sc_phy, E1000_AR);
+ reg |= E1000_AR_10T | E1000_AR_10T_FD |
+ E1000_AR_100TX | E1000_AR_100TX_FD |
+ E1000_AR_PAUSE | E1000_AR_ASM_DIR;
+ PHY_WRITE (sc_phy, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
+ } else {
+ PHY_WRITE (sc_phy, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE);
+ }
+
+ if ((sc->mii_extcapabilities & (E1000_ESR_1000T_FD | E1000_ESR_1000T)) != 0) {
+ PHY_WRITE (sc_phy, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
+ }
+
+ PHY_WRITE (sc_phy, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);
+}
+
+//
+// Generic helper functions
+//
+
+const struct mii_phydesc *
+ mii_phy_match_gen (
+ const struct mii_attach_args *ma,
+ const struct mii_phydesc *mpd,
+ UINTN len
+ )
+{
+
+ for (; mpd->mpd_name != NULL;
+ mpd = (const struct mii_phydesc *) ((const CHAR8 *) mpd + len)) {
+ if (MII_OUI (ma->mii_id1, ma->mii_id2) == mpd->mpd_oui &&
+ MII_MODEL (ma->mii_id2) == mpd->mpd_model) {
+ return (mpd);
+ }
+ }
+ return (NULL);
+}
+
+const struct mii_phydesc *
+ mii_phy_match (
+ const struct mii_attach_args *ma,
+ const struct mii_phydesc *mpd
+ )
+{
+
+ return (mii_phy_match_gen (ma, mpd, sizeof (struct mii_phydesc)));
+}
+
+EFI_STATUS
+mii_phy_dev_probe (
+ const struct mii_attach_args *ma,
+ const struct mii_phydesc *mpd
+ )
+{
+
+ mpd = mii_phy_match (ma, mpd);
+ if (mpd != NULL) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Found PHY (%a)\n", mpd->mpd_name));
+ return EFI_SUCCESS;
+ }
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: PHY not found (OUI=0x%x, MODEL=0x%x)\n",
+ MII_OUI (ma->mii_id1, ma->mii_id2), MII_MODEL (ma->mii_id2)));
+ return EFI_NOT_FOUND;
+}
diff --git a/OptionRomPkg/MarvellYukonDxe/e1000phyreg.h b/OptionRomPkg/MarvellYukonDxe/e1000phyreg.h
new file mode 100644
index 0000000000..fb21a209a7
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/e1000phyreg.h
@@ -0,0 +1,410 @@
+/** <at> file
+* Registers and Macros for Marvell 88E1000 Series PHYs. Ported from FreeBSD.
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+/* $FreeBSD: src/sys/dev/mii/e1000phyreg.h,v 1.7.2.2.2.1 2010/06/14 02:09:06 kensmith Exp $ */
+/*-
+ * Principal Author: Parag Patel
+ * Copyright (c) 2001
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice unmodified, this list of conditions, and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Additonal Copyright (c) 2001 by Traakan Software under same licence.
+ * Secondary Author: Matthew Jacob
+ */
+
+/*-
+ * Derived by information released by Intel under the following license:
+ *
+ * Copyright (c) 1999 - 2001, Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Marvell E1000 PHY registers
+ */
+
+#ifndef _E1000_PHYREG_H_
+#define _E1000_PHYREG_H_
+
+#define E1000_MAX_REG_ADDRESS 0x1F
+
+#define E1000_CR 0x00 /* control register */
+#define E1000_CR_SPEED_SELECT_MSB 0x0040
+#define E1000_CR_COLL_TEST_ENABLE 0x0080
+#define E1000_CR_FULL_DUPLEX 0x0100
+#define E1000_CR_RESTART_AUTO_NEG 0x0200
+#define E1000_CR_ISOLATE 0x0400
+#define E1000_CR_POWER_DOWN 0x0800
+#define E1000_CR_AUTO_NEG_ENABLE 0x1000
+#define E1000_CR_SPEED_SELECT_LSB 0x2000
+#define E1000_CR_LOOPBACK 0x4000
+#define E1000_CR_RESET 0x8000
+
+#define E1000_CR_SPEED_1000 0x0040
+#define E1000_CR_SPEED_100 0x2000
+#define E1000_CR_SPEED_10 0x0000
+
+#define E1000_SR 0x01 /* status register */
+#define E1000_SR_EXTENDED 0x0001
+#define E1000_SR_JABBER_DETECT 0x0002
+#define E1000_SR_LINK_STATUS 0x0004
+#define E1000_SR_AUTO_NEG 0x0008
+#define E1000_SR_REMOTE_FAULT 0x0010
+#define E1000_SR_AUTO_NEG_COMPLETE 0x0020
+#define E1000_SR_PREAMBLE_SUPPRESS 0x0040
+#define E1000_SR_EXTENDED_STATUS 0x0100
+#define E1000_SR_100T2 0x0200
+#define E1000_SR_100T2_FD 0x0400
+#define E1000_SR_10T 0x0800
+#define E1000_SR_10T_FD 0x1000
+#define E1000_SR_100TX 0x2000
+#define E1000_SR_100TX_FD 0x4000
+#define E1000_SR_100T4 0x8000
+#define E1000_SR_MEDIAMASK (E1000_SR_100T4|E1000_SR_100TX_FD|E1000_SR_100TX| \
+ E1000_SR_10T_FD|E1000_SR_10T|E1000_SR_100T2_FD|E1000_SR_100T2)
+
+#define E1000_ID1 0x02 /* ID register 1 */
+#define E1000_ID2 0x03 /* ID register 2 */
+#define E1000_ID_88E1000 0x01410C50
+#define E1000_ID_88E1000S 0x01410C40
+#define E1000_ID_88E1011 0x01410C20
+#define E1000_ID_MASK 0xFFFFFFF0
+
+#define IDR2_OUILSB 0xfc00 /* OUI LSB */
+#define IDR2_MODEL 0x03f0 /* vendor model */
+#define IDR2_REV 0x000f /* vendor revision */
+#define MII_OUI(id1, id2) (((id1) << 6) | ((id2) >> 10))
+#define MII_MODEL(id2) (((id2) & IDR2_MODEL) >> 4)
+#define MII_REV(id2) ((id2) & IDR2_REV)
+
+
+#define E1000_AR 0x04 /* autonegotiation advertise reg */
+#define E1000_AR_SELECTOR_FIELD 0x0001
+#define E1000_AR_10T 0x0020
+#define E1000_AR_10T_FD 0x0040
+#define E1000_AR_100TX 0x0080
+#define E1000_AR_100TX_FD 0x0100
+#define E1000_AR_100T4 0x0200
+#define E1000_AR_PAUSE 0x0400
+#define E1000_AR_ASM_DIR 0x0800
+#define E1000_AR_REMOTE_FAULT 0x2000
+#define E1000_AR_NEXT_PAGE 0x8000
+#define E1000_AR_SPEED_MASK 0x01E0
+
+/* Autonegotiation register bits for fiber cards (Alaska Only!) */
+#define E1000_FA_1000X_FD 0x0020
+#define E1000_FA_1000X 0x0040
+#define E1000_FA_SYM_PAUSE 0x0080
+#define E1000_FA_ASYM_PAUSE 0x0100
+#define E1000_FA_FAULT1 0x1000
+#define E1000_FA_FAULT2 0x2000
+#define E1000_FA_NEXT_PAGE 0x8000
+
+#define E1000_LPAR 0x05 /* autoneg link partner abilities reg */
+#define E1000_LPAR_SELECTOR_FIELD 0x0001
+#define E1000_LPAR_10T 0x0020
+#define E1000_LPAR_10T_FD 0x0040
+#define E1000_LPAR_100TX 0x0080
+#define E1000_LPAR_100TX_FD 0x0100
+#define E1000_LPAR_100T4 0x0200
+#define E1000_LPAR_PAUSE 0x0400
+#define E1000_LPAR_ASM_DIR 0x0800
+#define E1000_LPAR_REMOTE_FAULT 0x2000
+#define E1000_LPAR_ACKNOWLEDGE 0x4000
+#define E1000_LPAR_NEXT_PAGE 0x8000
+
+/* autoneg link partner ability register bits for fiber cards (Alaska Only!) */
+#define E1000_FPAR_1000X_FD 0x0020
+#define E1000_FPAR_1000X 0x0040
+#define E1000_FPAR_SYM_PAUSE 0x0080
+#define E1000_FPAR_ASYM_PAUSE 0x0100
+#define E1000_FPAR_FAULT1 0x1000
+#define E1000_FPAR_FAULT2 0x2000
+#define E1000_FPAR_ACK 0x4000
+#define E1000_FPAR_NEXT_PAGE 0x8000
+
+#define E1000_ER 0x06 /* autoneg expansion reg */
+#define E1000_ER_LP_NWAY 0x0001
+#define E1000_ER_PAGE_RXD 0x0002
+#define E1000_ER_NEXT_PAGE 0x0004
+#define E1000_ER_LP_NEXT_PAGE 0x0008
+#define E1000_ER_PAR_DETECT_FAULT 0x0100
+
+#define E1000_NPTX 0x07 /* autoneg next page TX */
+#define E1000_NPTX_MSG_CODE_FIELD 0x0001
+#define E1000_NPTX_TOGGLE 0x0800
+#define E1000_NPTX_ACKNOWLDGE2 0x1000
+#define E1000_NPTX_MSG_PAGE 0x2000
+#define E1000_NPTX_NEXT_PAGE 0x8000
+
+#define E1000_RNPR 0x08 /* autoneg link-partner (?) next page */
+#define E1000_RNPR_MSG_CODE_FIELD 0x0001
+#define E1000_RNPR_TOGGLE 0x0800
+#define E1000_RNPR_ACKNOWLDGE2 0x1000
+#define E1000_RNPR_MSG_PAGE 0x2000
+#define E1000_RNPR_ACKNOWLDGE 0x4000
+#define E1000_RNPR_NEXT_PAGE 0x8000
+
+#define E1000_1GCR 0x09 /* 1000T (1G) control reg */
+#define E1000_1GCR_ASYM_PAUSE 0x0080
+#define E1000_1GCR_1000T 0x0100
+#define E1000_1GCR_1000T_FD 0x0200
+#define E1000_1GCR_REPEATER_DTE 0x0400
+#define E1000_1GCR_MS_VALUE 0x0800
+#define E1000_1GCR_MS_ENABLE 0x1000
+#define E1000_1GCR_TEST_MODE_NORMAL 0x0000
+#define E1000_1GCR_TEST_MODE_1 0x2000
+#define E1000_1GCR_TEST_MODE_2 0x4000
+#define E1000_1GCR_TEST_MODE_3 0x6000
+#define E1000_1GCR_TEST_MODE_4 0x8000
+#define E1000_1GCR_SPEED_MASK 0x0300
+
+#define E1000_1GSR 0x0A /* 1000T (1G) status reg */
+#define E1000_1GSR_IDLE_ERROR_CNT 0x0000
+#define E1000_1GSR_ASYM_PAUSE_DIR 0x0100
+#define E1000_1GSR_LP 0x0400
+#define E1000_1GSR_LP_FD 0x0800
+#define E1000_1GSR_REMOTE_RX_STATUS 0x1000
+#define E1000_1GSR_LOCAL_RX_STATUS 0x2000
+#define E1000_1GSR_MS_CONFIG_RES 0x4000
+#define E1000_1GSR_MS_CONFIG_FAULT 0x8000
+
+#define E1000_ESR 0x0F /* IEEE extended status reg */
+#define E1000_ESR_1000T 0x1000
+#define E1000_ESR_1000T_FD 0x2000
+#define E1000_ESR_1000X 0x4000
+#define E1000_ESR_1000X_FD 0x8000
+
+#define E1000_TX_POLARITY_MASK 0x0100
+#define E1000_TX_NORMAL_POLARITY 0
+
+#define E1000_AUTO_POLARITY_DISABLE 0x0010
+
+#define E1000_SCR 0x10 /* special control register */
+#define E1000_SCR_JABBER_DISABLE 0x0001
+#define E1000_SCR_POLARITY_REVERSAL 0x0002
+#define E1000_SCR_SQE_TEST 0x0004
+#define E1000_SCR_INT_FIFO_DISABLE 0x0008
+#define E1000_SCR_CLK125_DISABLE 0x0010
+#define E1000_SCR_MDI_MANUAL_MODE 0x0000
+#define E1000_SCR_MDIX_MANUAL_MODE 0x0020
+#define E1000_SCR_AUTO_X_1000T 0x0040
+#define E1000_SCR_AUTO_X_MODE 0x0060
+#define E1000_SCR_10BT_EXT_ENABLE 0x0080
+#define E1000_SCR_MII_5BIT_ENABLE 0x0100
+#define E1000_SCR_SCRAMBLER_DISABLE 0x0200
+#define E1000_SCR_FORCE_LINK_GOOD 0x0400
+#define E1000_SCR_ASSERT_CRS_ON_TX 0x0800
+#define E1000_SCR_RX_FIFO_DEPTH_6 0x0000
+#define E1000_SCR_RX_FIFO_DEPTH_8 0x1000
+#define E1000_SCR_RX_FIFO_DEPTH_10 0x2000
+#define E1000_SCR_RX_FIFO_DEPTH_12 0x3000
+#define E1000_SCR_TX_FIFO_DEPTH_6 0x0000
+#define E1000_SCR_TX_FIFO_DEPTH_8 0x4000
+#define E1000_SCR_TX_FIFO_DEPTH_10 0x8000
+#define E1000_SCR_TX_FIFO_DEPTH_12 0xC000
+
+/* 88E3016 only */
+#define E1000_SCR_AUTO_MDIX 0x0030
+#define E1000_SCR_SIGDET_POLARITY 0x0040
+#define E1000_SCR_EXT_DISTANCE 0x0080
+#define E1000_SCR_FEFI_DISABLE 0x0100
+#define E1000_SCR_NLP_GEN_DISABLE 0x0800
+#define E1000_SCR_LPNP 0x1000
+#define E1000_SCR_NLP_CHK_DISABLE 0x2000
+#define E1000_SCR_EN_DETECT 0x4000
+
+#define E1000_SCR_EN_DETECT_MASK 0x0300
+
+/* 88E1112 page 1 fiber specific control */
+#define E1000_SCR_FIB_TX_DIS 0x0008
+#define E1000_SCR_FIB_SIGDET_POLARITY 0x0200
+#define E1000_SCR_FIB_FORCE_LINK 0x0400
+
+/* 88E1112 page 2 */
+#define E1000_SCR_MODE_MASK 0x0380
+#define E1000_SCR_MODE_AUTO 0x0180
+#define E1000_SCR_MODE_COPPER 0x0280
+#define E1000_SCR_MODE_1000BX 0x0380
+
+/* 88E1116 page 0 */
+#define E1000_SCR_POWER_DOWN 0x0004
+/* 88E1116, 88E1149 page 2 */
+#define E1000_SCR_RGMII_POWER_UP 0x0008
+
+/* 88E1116, 88E1149 page 3 */
+#define E1000_SCR_LED_STAT0_MASK 0x000F
+#define E1000_SCR_LED_STAT1_MASK 0x00F0
+#define E1000_SCR_LED_INIT_MASK 0x0F00
+#define E1000_SCR_LED_LOS_MASK 0xF000
+#define E1000_SCR_LED_STAT0(x) ((x) & E1000_SCR_LED_STAT0_MASK)
+#define E1000_SCR_LED_STAT1(x) ((x) & E1000_SCR_LED_STAT1_MASK)
+#define E1000_SCR_LED_INIT(x) ((x) & E1000_SCR_LED_INIT_MASK)
+#define E1000_SCR_LED_LOS(x) ((x) & E1000_SCR_LED_LOS_MASK)
+
+#define E1000_SSR 0x11 /* special status register */
+#define E1000_SSR_JABBER 0x0001
+#define E1000_SSR_REV_POLARITY 0x0002
+#define E1000_SSR_MDIX 0x0020
+#define E1000_SSR_LINK 0x0400
+#define E1000_SSR_SPD_DPLX_RESOLVED 0x0800
+#define E1000_SSR_PAGE_RCVD 0x1000
+#define E1000_SSR_DUPLEX 0x2000
+#define E1000_SSR_SPEED 0xC000
+#define E1000_SSR_10MBS 0x0000
+#define E1000_SSR_100MBS 0x4000
+#define E1000_SSR_1000MBS 0x8000
+
+#define E1000_IER 0x12 /* interrupt enable reg */
+#define E1000_IER_JABBER 0x0001
+#define E1000_IER_POLARITY_CHANGE 0x0002
+#define E1000_IER_MDIX_CHANGE 0x0040
+#define E1000_IER_FIFO_OVER_UNDERUN 0x0080
+#define E1000_IER_FALSE_CARRIER 0x0100
+#define E1000_IER_SYMBOL_ERROR 0x0200
+#define E1000_IER_LINK_STAT_CHANGE 0x0400
+#define E1000_IER_AUTO_NEG_COMPLETE 0x0800
+#define E1000_IER_PAGE_RECEIVED 0x1000
+#define E1000_IER_DUPLEX_CHANGED 0x2000
+#define E1000_IER_SPEED_CHANGED 0x4000
+#define E1000_IER_AUTO_NEG_ERR 0x8000
+
+/* 88E1116, 88E1149 page 3, LED timer control. */
+#define E1000_PULSE_MASK 0x7000
+#define E1000_PULSE_NO_STR 0 /* no pulse stretching */
+#define E1000_PULSE_21MS 1 /* 21 ms to 42 ms */
+#define E1000_PULSE_42MS 2 /* 42 ms to 84 ms */
+#define E1000_PULSE_84MS 3 /* 84 ms to 170 ms */
+#define E1000_PULSE_170MS 4 /* 170 ms to 340 ms */
+#define E1000_PULSE_340MS 5 /* 340 ms to 670 ms */
+#define E1000_PULSE_670MS 6 /* 670 ms to 1300 ms */
+#define E1000_PULSE_1300MS 7 /* 1300 ms to 2700 ms */
+#define E1000_PULSE_DUR(x) ((x) & E1000_PULSE_MASK)
+
+#define E1000_BLINK_MASK 0x0700
+#define E1000_BLINK_42MS 0 /* 42 ms */
+#define E1000_BLINK_84MS 1 /* 84 ms */
+#define E1000_BLINK_170MS 2 /* 170 ms */
+#define E1000_BLINK_340MS 3 /* 340 ms */
+#define E1000_BLINK_670MS 4 /* 670 ms */
+#define E1000_BLINK_RATE(x) ((x) & E1000_BLINK_MASK)
+
+#define E1000_ISR 0x13 /* interrupt status reg */
+#define E1000_ISR_JABBER 0x0001
+#define E1000_ISR_POLARITY_CHANGE 0x0002
+#define E1000_ISR_MDIX_CHANGE 0x0040
+#define E1000_ISR_FIFO_OVER_UNDERUN 0x0080
+#define E1000_ISR_FALSE_CARRIER 0x0100
+#define E1000_ISR_SYMBOL_ERROR 0x0200
+#define E1000_ISR_LINK_STAT_CHANGE 0x0400
+#define E1000_ISR_AUTO_NEG_COMPLETE 0x0800
+#define E1000_ISR_PAGE_RECEIVED 0x1000
+#define E1000_ISR_DUPLEX_CHANGED 0x2000
+#define E1000_ISR_SPEED_CHANGED 0x4000
+#define E1000_ISR_AUTO_NEG_ERR 0x8000
+
+#define E1000_ESCR 0x14 /* extended special control reg */
+#define E1000_ESCR_FIBER_LOOPBACK 0x4000
+#define E1000_ESCR_DOWN_NO_IDLE 0x8000
+#define E1000_ESCR_TX_CLK_2_5 0x0060
+#define E1000_ESCR_TX_CLK_25 0x0070
+#define E1000_ESCR_TX_CLK_0 0x0000
+
+#define E1000_RECR 0x15 /* RX error counter reg */
+
+#define E1000_EADR 0x16 /* extended address reg */
+
+#define E1000_LCR 0x18 /* LED control reg */
+#define E1000_LCR_LED_TX 0x0001
+#define E1000_LCR_LED_RX 0x0002
+#define E1000_LCR_LED_DUPLEX 0x0004
+#define E1000_LCR_LINK 0x0008
+#define E1000_LCR_BLINK_42MS 0x0000
+#define E1000_LCR_BLINK_84MS 0x0100
+#define E1000_LCR_BLINK_170MS 0x0200
+#define E1000_LCR_BLINK_340MS 0x0300
+#define E1000_LCR_BLINK_670MS 0x0400
+#define E1000_LCR_PULSE_OFF 0x0000
+#define E1000_LCR_PULSE_21_42MS 0x1000
+#define E1000_LCR_PULSE_42_84MS 0x2000
+#define E1000_LCR_PULSE_84_170MS 0x3000
+#define E1000_LCR_PULSE_170_340MS 0x4000
+#define E1000_LCR_PULSE_340_670MS 0x5000
+#define E1000_LCR_PULSE_670_13S 0x6000
+#define E1000_LCR_PULSE_13_26S 0x7000
+
+/* The following register is found only on the 88E1011 Alaska PHY */
+#define E1000_ESSR 0x1B /* Extended PHY specific sts */
+#define E1000_ESSR_FIBER_LINK 0x2000
+#define E1000_ESSR_GMII_COPPER 0x000f
+#define E1000_ESSR_GMII_FIBER 0x0007
+#define E1000_ESSR_TBI_COPPER 0x000d
+#define E1000_ESSR_TBI_FIBER 0x0005
+
+struct e1000phy_softc {
+ struct mii_softc mii_sc;
+ INTN mii_model;
+ const struct msk_mii_data *mmd;
+ VOID *sc_if; /* parent logical controller */
+};
+
+#endif /* _E1000_PHYREG_H_ */
diff --git a/OptionRomPkg/MarvellYukonDxe/if_media.h b/OptionRomPkg/MarvellYukonDxe/if_media.h
new file mode 100644
index 0000000000..cdc1a58d57
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/if_media.h
@@ -0,0 +1,273 @@
+/** <at> file
+* Prototypes and definitions for BSD/OS-compatible network interface media selection.
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+/* $NetBSD: if_media.h,v 1.3 1997/03/26 01:19:27 thorpej Exp $ */
+/* $FreeBSD: src/sys/net/if_media.h,v 1.47.2.1.4.1 2010/06/14 02:09:06 kensmith Exp $ */
+
+/*-
+ * Copyright (c) 1997
+ * Jonathan Stone and Jason R. Thorpe. All rights reserved.
+ *
+ * This software is derived from information provided by Matt Thomas.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Jonathan Stone
+ * and Jason R. Thorpe for the NetBSD Project.
+ * 4. The names of the authors may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _NET_IF_MEDIA_H_
+#define _NET_IF_MEDIA_H_
+
+/*
+ * Prototypes and definitions for BSD/OS-compatible network interface
+ * media selection.
+ *
+ * Where it is safe to do so, this code strays slightly from the BSD/OS
+ * design. Software which uses the API (device drivers, basically)
+ * shouldn't notice any difference.
+ *
+ * Many thanks to Matt Thomas for providing the information necessary
+ * to implement this interface.
+ */
+
+/*
+ * if_media Options word:
+ * Bits Use
+ * ---- -------
+ * 0-4 Media variant
+ * 5-7 Media type
+ * 8-15 Type specific options
+ * 16-18 Mode (for multi-mode devices)
+ * 19 RFU
+ * 20-27 Shared (global) options
+ * 28-31 Instance
+ */
+
+/*
+ * Ethernet
+ */
+#define IFM_ETHER 0x00000020
+#define IFM_10_T 3 /* 10BaseT - RJ45 */
+#define IFM_10_2 4 /* 10Base2 - Thinnet */
+#define IFM_10_5 5 /* 10Base5 - AUI */
+#define IFM_100_TX 6 /* 100BaseTX - RJ45 */
+#define IFM_100_FX 7 /* 100BaseFX - Fiber */
+#define IFM_100_T4 8 /* 100BaseT4 - 4 pair cat 3 */
+#define IFM_100_VG 9 /* 100VG-AnyLAN */
+#define IFM_100_T2 10 /* 100BaseT2 */
+#define IFM_1000_SX 11 /* 1000BaseSX - multi-mode fiber */
+#define IFM_10_STP 12 /* 10BaseT over shielded TP */
+#define IFM_10_FL 13 /* 10BaseFL - Fiber */
+#define IFM_1000_LX 14 /* 1000baseLX - single-mode fiber */
+#define IFM_1000_CX 15 /* 1000baseCX - 150ohm STP */
+#define IFM_1000_T 16 /* 1000baseT - 4 pair cat 5 */
+#define IFM_HPNA_1 17 /* HomePNA 1.0 (1Mb/s) */
+#define IFM_10G_LR 18 /* 10GBase-LR 1310nm Single-mode */
+#define IFM_10G_SR 19 /* 10GBase-SR 850nm Multi-mode */
+#define IFM_10G_CX4 20 /* 10GBase CX4 copper */
+#define IFM_2500_SX 21 /* 2500BaseSX - multi-mode fiber */
+#define IFM_10G_TWINAX 22 /* 10GBase Twinax copper */
+#define IFM_10G_TWINAX_LONG 23 /* 10GBase Twinax Long copper */
+#define IFM_10G_LRM 24 /* 10GBase-LRM 850nm Multi-mode */
+#define IFM_UNKNOWN 25 /* media types not defined yet */
+#define IFM_10G_T 26 /* 10GBase-T - RJ45 */
+
+
+/* note 31 is the max! */
+
+#define IFM_ETH_MASTER 0x00000100 /* master mode (1000baseT) */
+
+/*
+ * Token ring
+ */
+#define IFM_TOKEN 0x00000040
+#define IFM_TOK_STP4 3 /* Shielded twisted pair 4m - DB9 */
+#define IFM_TOK_STP16 4 /* Shielded twisted pair 16m - DB9 */
+#define IFM_TOK_UTP4 5 /* Unshielded twisted pair 4m - RJ45 */
+#define IFM_TOK_UTP16 6 /* Unshielded twisted pair 16m - RJ45 */
+#define IFM_TOK_STP100 7 /* Shielded twisted pair 100m - DB9 */
+#define IFM_TOK_UTP100 8 /* Unshielded twisted pair 100m - RJ45 */
+#define IFM_TOK_ETR 0x00000200 /* Early token release */
+#define IFM_TOK_SRCRT 0x00000400 /* Enable source routing features */
+#define IFM_TOK_ALLR 0x00000800 /* All routes / Single route bcast */
+#define IFM_TOK_DTR 0x00002000 /* Dedicated token ring */
+#define IFM_TOK_CLASSIC 0x00004000 /* Classic token ring */
+#define IFM_TOK_AUTO 0x00008000 /* Automatic Dedicate/Classic token ring */
+
+/*
+ * FDDI
+ */
+#define IFM_FDDI 0x00000060
+#define IFM_FDDI_SMF 3 /* Single-mode fiber */
+#define IFM_FDDI_MMF 4 /* Multi-mode fiber */
+#define IFM_FDDI_UTP 5 /* CDDI / UTP */
+#define IFM_FDDI_DA 0x00000100 /* Dual attach / single attach */
+
+/*
+ * IEEE 802.11 Wireless
+ */
+#define IFM_IEEE80211 0x00000080
+/* NB: 0,1,2 are auto, manual, none defined below */
+#define IFM_IEEE80211_FH1 3 /* Frequency Hopping 1Mbps */
+#define IFM_IEEE80211_FH2 4 /* Frequency Hopping 2Mbps */
+#define IFM_IEEE80211_DS1 5 /* Direct Sequence 1Mbps */
+#define IFM_IEEE80211_DS2 6 /* Direct Sequence 2Mbps */
+#define IFM_IEEE80211_DS5 7 /* Direct Sequence 5.5Mbps */
+#define IFM_IEEE80211_DS11 8 /* Direct Sequence 11Mbps */
+#define IFM_IEEE80211_DS22 9 /* Direct Sequence 22Mbps */
+#define IFM_IEEE80211_OFDM6 10 /* OFDM 6Mbps */
+#define IFM_IEEE80211_OFDM9 11 /* OFDM 9Mbps */
+#define IFM_IEEE80211_OFDM12 12 /* OFDM 12Mbps */
+#define IFM_IEEE80211_OFDM18 13 /* OFDM 18Mbps */
+#define IFM_IEEE80211_OFDM24 14 /* OFDM 24Mbps */
+#define IFM_IEEE80211_OFDM36 15 /* OFDM 36Mbps */
+#define IFM_IEEE80211_OFDM48 16 /* OFDM 48Mbps */
+#define IFM_IEEE80211_OFDM54 17 /* OFDM 54Mbps */
+#define IFM_IEEE80211_OFDM72 18 /* OFDM 72Mbps */
+#define IFM_IEEE80211_DS354k 19 /* Direct Sequence 354Kbps */
+#define IFM_IEEE80211_DS512k 20 /* Direct Sequence 512Kbps */
+#define IFM_IEEE80211_OFDM3 21 /* OFDM 3Mbps */
+#define IFM_IEEE80211_OFDM4 22 /* OFDM 4.5Mbps */
+#define IFM_IEEE80211_OFDM27 23 /* OFDM 27Mbps */
+/* NB: not enough bits to express MCS fully */
+#define IFM_IEEE80211_MCS 24 /* HT MCS rate */
+
+#define IFM_IEEE80211_ADHOC 0x00000100 /* Operate in Adhoc mode */
+#define IFM_IEEE80211_HOSTAP 0x00000200 /* Operate in Host AP mode */
+#define IFM_IEEE80211_IBSS 0x00000400 /* Operate in IBSS mode */
+#define IFM_IEEE80211_WDS 0x00000800 /* Operate in WDS mode */
+#define IFM_IEEE80211_TURBO 0x00001000 /* Operate in turbo mode */
+#define IFM_IEEE80211_MONITOR 0x00002000 /* Operate in monitor mode */
+#define IFM_IEEE80211_MBSS 0x00004000 /* Operate in MBSS mode */
+
+/* operating mode for multi-mode devices */
+#define IFM_IEEE80211_11A 0x00010000 /* 5Ghz, OFDM mode */
+#define IFM_IEEE80211_11B 0x00020000 /* Direct Sequence mode */
+#define IFM_IEEE80211_11G 0x00030000 /* 2Ghz, CCK mode */
+#define IFM_IEEE80211_FH 0x00040000 /* 2Ghz, GFSK mode */
+#define IFM_IEEE80211_11NA 0x00050000 /* 5Ghz, HT mode */
+#define IFM_IEEE80211_11NG 0x00060000 /* 2Ghz, HT mode */
+
+/*
+ * ATM
+ */
+#define IFM_ATM 0x000000a0
+#define IFM_ATM_UNKNOWN 3
+#define IFM_ATM_UTP_25 4
+#define IFM_ATM_TAXI_100 5
+#define IFM_ATM_TAXI_140 6
+#define IFM_ATM_MM_155 7
+#define IFM_ATM_SM_155 8
+#define IFM_ATM_UTP_155 9
+#define IFM_ATM_MM_622 10
+#define IFM_ATM_SM_622 11
+#define IFM_ATM_VIRTUAL 12
+#define IFM_ATM_SDH 0x00000100 /* SDH instead of SONET */
+#define IFM_ATM_NOSCRAMB 0x00000200 /* no scrambling */
+#define IFM_ATM_UNASSIGNED 0x00000400 /* unassigned cells */
+
+/*
+ * CARP Common Address Redundancy Protocol
+ */
+#define IFM_CARP 0x000000c0
+
+/*
+ * Shared media sub-types
+ */
+#define IFM_AUTO 0 /* Autoselect best media */
+#define IFM_MANUAL 1 /* Jumper/dipswitch selects media */
+#define IFM_NONE 2 /* Deselect all media */
+
+/*
+ * Shared options
+ */
+#define IFM_FDX 0x00100000 /* Force full duplex */
+#define IFM_HDX 0x00200000 /* Force half duplex */
+#define IFM_FLAG0 0x01000000 /* Driver defined flag */
+#define IFM_FLAG1 0x02000000 /* Driver defined flag */
+#define IFM_FLAG2 0x04000000 /* Driver defined flag */
+#define IFM_LOOP 0x08000000 /* Put hardware in loopback */
+
+/*
+ * Masks
+ */
+#define IFM_NMASK 0x000000e0 /* Network type */
+#define IFM_TMASK 0x0000001f /* Media sub-type */
+#define IFM_IMASK 0xf0000000 /* Instance */
+#define IFM_ISHIFT 28 /* Instance shift */
+#define IFM_OMASK 0x0000ff00 /* Type specific options */
+#define IFM_MMASK 0x00070000 /* Mode */
+#define IFM_MSHIFT 16 /* Mode shift */
+#define IFM_GMASK 0x0ff00000 /* Global options */
+
+/*
+ * Status bits
+ */
+#define IFM_AVALID 0x00000001 /* Active bit valid */
+#define IFM_ACTIVE 0x00000002 /* Interface attached to working net */
+
+/* Mask of "status valid" bits, for ifconfig(8). */
+#define IFM_STATUS_VALID IFM_AVALID
+
+/* List of "status valid" bits, for ifconfig(8). */
+#define IFM_STATUS_VALID_LIST { \
+ IFM_AVALID, \
+ 0 \
+ }
+
+/*
+ * Macros to extract various bits of information from the media word.
+ */
+#define IFM_TYPE(x) ((x) & IFM_NMASK)
+#define IFM_SUBTYPE(x) ((x) & IFM_TMASK)
+#define IFM_TYPE_OPTIONS(x) ((x) & IFM_OMASK)
+#define IFM_INST(x) (((x) & IFM_IMASK) >> IFM_ISHIFT)
+#define IFM_OPTIONS(x) ((x) & (IFM_OMASK|IFM_GMASK))
+#define IFM_MODE(x) ((x) & IFM_MMASK)
+
+#define IFM_INST_MAX IFM_INST(IFM_IMASK)
+
+/*
+ * Macro to create a media word.
+ */
+#define IFM_MAKEWORD(type, subtype, options, instance) \
+ ((type) | (subtype) | (options) | ((instance) << IFM_ISHIFT))
+#define IFM_MAKEMODE(mode) \
+ (((mode) << IFM_MSHIFT) & IFM_MMASK)
+
+
+#endif /* _NET_IF_MEDIA_H_ */
diff --git a/OptionRomPkg/MarvellYukonDxe/if_msk.c b/OptionRomPkg/MarvellYukonDxe/if_msk.c
new file mode 100644
index 0000000000..0e50260030
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/if_msk.c
@@ -0,0 +1,2978 @@
+/** <at> file
+* Support for PCIe Marvell Yukon gigabit ethernet adapter product family
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+* Copyright (c) 2017, Linaro Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+/******************************************************************************
+ *
+ * LICENSE:
+ * Copyright (C) Marvell International Ltd. and/or its affiliates
+ *
+ * The computer program files contained in this folder ("Files")
+ * are provided to you under the BSD-type license terms provided
+ * below, and any use of such Files and any derivative works
+ * thereof created by you shall be governed by the following terms
+ * and conditions:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * - Neither the name of Marvell nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * /LICENSE
+ *
+ *****************************************************************************/
+
+/*-
+ * Copyright (c) 1997, 1998, 1999, 2000
+ * Bill Paul <wpaul <at> ctr.columbia.edu>. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*-
+ * Copyright (c) 2003 Nathan L. Binkert <binkertn <at> umich.edu>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Device driver for the Marvell Yukon II Ethernet controller.
+ * Due to lack of documentation, this driver is based on the code from
+ * sk (4) and Marvell's myk (4) driver for FreeBSD 5.x.
+ */
+
+#include <Base.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/NetLib.h>
+#include <Library/PcdLib.h>
+#include <Library/BaseLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/PciIo.h>
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Acpi.h>
+#include "miivar.h"
+#include "if_media.h"
+#include "if_mskreg.h"
+#include "if_msk.h"
+
+#define MSK_CSUM_FEATURES (CSUM_TCP | CSUM_UDP)
+
+/*
+ * Devices supported by this driver.
+ */
+static struct msk_product {
+ UINT16 msk_vendorid;
+ UINT16 msk_deviceid;
+ const CHAR8 *msk_name;
+} msk_products[] = {
+{ VENDORID_SK, DEVICEID_SK_YUKON2, "SK-9Sxx Gigabit Ethernet" },
+{ VENDORID_SK, DEVICEID_SK_YUKON2_EXPR, "SK-9Exx Gigabit Ethernet"},
+{ VENDORID_MARVELL, DEVICEID_MRVL_8021CU, "Marvell Yukon 88E8021CU Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8021X, "Marvell Yukon 88E8021 SX/LX Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8022CU, "Marvell Yukon 88E8022CU Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8022X, "Marvell Yukon 88E8022 SX/LX Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8061CU, "Marvell Yukon 88E8061CU Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8061X, "Marvell Yukon 88E8061 SX/LX Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8062CU, "Marvell Yukon 88E8062CU Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8062X, "Marvell Yukon 88E8062 SX/LX Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8035, "Marvell Yukon 88E8035 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8036, "Marvell Yukon 88E8036 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8038, "Marvell Yukon 88E8038 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8039, "Marvell Yukon 88E8039 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8040, "Marvell Yukon 88E8040 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8040T, "Marvell Yukon 88E8040T Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8042, "Marvell Yukon 88E8042 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_8048, "Marvell Yukon 88E8048 Fast Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4361, "Marvell Yukon 88E8050 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4360, "Marvell Yukon 88E8052 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4362, "Marvell Yukon 88E8053 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4363, "Marvell Yukon 88E8055 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4364, "Marvell Yukon 88E8056 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4365, "Marvell Yukon 88E8070 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_436A, "Marvell Yukon 88E8058 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_436B, "Marvell Yukon 88E8071 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_436C, "Marvell Yukon 88E8072 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4380, "Marvell Yukon 88E8057 Gigabit Ethernet" },
+{ VENDORID_MARVELL, DEVICEID_MRVL_4381, "Marvell Yukon 88E8059 Gigabit Ethernet" },
+{ VENDORID_DLINK, DEVICEID_DLINK_DGE550SX, "D-Link 550SX Gigabit Ethernet" },
+{ VENDORID_DLINK, DEVICEID_DLINK_DGE560SX, "D-Link 560SX Gigabit Ethernet" },
+{ VENDORID_DLINK, DEVICEID_DLINK_DGE560T, "D-Link 560T Gigabit Ethernet" }
+};
+
+#ifndef MDEPKG_NDEBUG
+static const CHAR8 *model_name[] = {
+ "Yukon XL",
+ "Yukon EC Ultra",
+ "Yukon EX",
+ "Yukon EC",
+ "Yukon FE",
+ "Yukon FE+",
+ "Yukon Supreme",
+ "Yukon Ultra 2",
+ "Yukon Unknown",
+ "Yukon Optima",
+};
+#endif
+
+//
+// Forward declarations
+//
+STATIC VOID mskc_setup_rambuffer (struct msk_softc *);
+STATIC VOID mskc_reset (struct msk_softc *);
+
+EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN);
+VOID mskc_detach_if (struct msk_if_softc *);
+
+static VOID mskc_tick (IN EFI_EVENT, IN VOID*);
+STATIC VOID msk_intr (struct msk_softc *);
+static VOID msk_intr_phy (struct msk_if_softc *);
+static VOID msk_intr_gmac (struct msk_if_softc *);
+static __inline VOID msk_rxput (struct msk_if_softc *);
+STATIC INTN msk_handle_events (struct msk_softc *);
+static VOID msk_handle_hwerr (struct msk_if_softc *, UINT32);
+STATIC VOID msk_intr_hwerr (struct msk_softc *);
+static VOID msk_rxeof (struct msk_if_softc *, UINT32, UINT32, INTN);
+static VOID msk_txeof (struct msk_if_softc *, INTN);
+static EFI_STATUS msk_encap (struct msk_if_softc *, MSK_SYSTEM_BUF *);
+STATIC VOID msk_start (struct msk_if_softc *);
+STATIC VOID msk_set_prefetch (struct msk_if_softc *, INTN, EFI_PHYSICAL_ADDRESS, UINT32);
+static VOID msk_set_rambuffer (struct msk_if_softc *);
+static VOID msk_set_tx_stfwd (struct msk_if_softc *);
+static EFI_STATUS msk_init (struct msk_if_softc *);
+VOID mskc_stop_if (struct msk_if_softc *);
+static VOID msk_phy_power (struct msk_softc *, INTN);
+INTN msk_phy_readreg (struct msk_if_softc *, INTN);
+INTN msk_phy_writereg (struct msk_if_softc *, INTN, INTN);
+STATIC EFI_STATUS msk_status_dma_alloc (struct msk_softc *);
+STATIC VOID msk_status_dma_free (struct msk_softc *);
+static EFI_STATUS msk_txrx_dma_alloc (struct msk_if_softc *);
+static VOID msk_txrx_dma_free (struct msk_if_softc *);
+static EFI_STATUS msk_init_rx_ring (struct msk_if_softc *);
+static VOID msk_init_tx_ring (struct msk_if_softc *);
+static __inline VOID msk_discard_rxbuf (struct msk_if_softc *, INTN);
+static EFI_STATUS msk_newbuf (struct msk_if_softc *, INTN);
+
+static VOID msk_rxfilter (
+ struct msk_if_softc *sc_if,
+ UINT32 FilterFlags,
+ UINTN MCastFilterCnt,
+ EFI_MAC_ADDRESS *MCastFilter
+ );
+static VOID msk_setvlan (struct msk_if_softc *);
+
+static VOID msk_stats_clear (struct msk_if_softc *);
+static VOID msk_stats_update (struct msk_if_softc *);
+STATIC VOID clear_pci_errors (struct msk_softc *);
+
+EFI_STATUS e1000_probe_and_attach (struct mii_data *, const struct msk_mii_data *, VOID *, VOID **);
+VOID e1000phy_tick (VOID *);
+VOID e1000phy_mediachg (VOID *);
+EFI_STATUS e1000phy_detach (VOID *);
+
+//
+// Functions
+//
+
+INTN
+msk_phy_readreg (
+ struct msk_if_softc *sc_if,
+ INTN reg
+ )
+{
+ INTN i;
+ INTN val;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD (PHY_ADDR_MARV) | GM_SMI_CT_REG_AD (reg) | GM_SMI_CT_OP_RD);
+
+ for (i = 0; i < MSK_TIMEOUT; i++) {
+ gBS->Stall (1);
+ val = GMAC_READ_2 (sc, port, GM_SMI_CTRL);
+ if ((val & GM_SMI_CT_RD_VAL) != 0) {
+ val = GMAC_READ_2 (sc, port, GM_SMI_DATA);
+ break;
+ }
+ }
+
+ if (i == MSK_TIMEOUT) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: phy failed to come ready\n"));
+ val = 0;
+ }
+
+ return (val);
+}
+
+INTN
+msk_phy_writereg (
+ struct msk_if_softc *sc_if,
+ INTN reg,
+ INTN val
+ )
+{
+ INTN i;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ GMAC_WRITE_2 (sc, port, GM_SMI_DATA, val);
+ GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD (PHY_ADDR_MARV) | GM_SMI_CT_REG_AD (reg));
+ for (i = 0; i < MSK_TIMEOUT; i++) {
+ gBS->Stall (1);
+ if ((GMAC_READ_2 (sc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) {
+ break;
+ }
+ }
+ if (i == MSK_TIMEOUT) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: phy write timeout\n"));
+ }
+
+ return (0);
+}
+
+VOID
+msk_miibus_statchg (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct mii_data *mii;
+ UINT32 gmac;
+ UINTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+ mii = &sc_if->mii_d;
+ sc_if->msk_flags &= ~MSK_FLAG_LINK;
+
+ if ((mii->mii_media_status & (IFM_AVALID | IFM_ACTIVE)) == (IFM_AVALID | IFM_ACTIVE)) {
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: msk_miibus_statchg, phy is active\n"));
+ switch (IFM_SUBTYPE (mii->mii_media_active)) {
+ case IFM_10_T:
+ case IFM_100_TX:
+ sc_if->msk_flags |= MSK_FLAG_LINK;
+ break;
+ case IFM_1000_T:
+ case IFM_1000_SX:
+ case IFM_1000_LX:
+ case IFM_1000_CX:
+ if ((sc_if->msk_flags & MSK_FLAG_FASTETHER) == 0) {
+ sc_if->msk_flags |= MSK_FLAG_LINK;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ if ((sc_if->msk_flags & MSK_FLAG_LINK) != 0) {
+ // Enable Tx FIFO Underrun
+ DEBUG ((DEBUG_NET, "Marvell Yukon: msk_miibus_statchg, link up\n"));
+
+ CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR);
+ //
+ // Because mii(4) notify msk (4) that it detected link status
+ // change, there is no need to enable automatic
+ // speed/flow-control/duplex updates.
+ //
+ gmac = GM_GPCR_AU_ALL_DIS;
+ switch (IFM_SUBTYPE (mii->mii_media_active)) {
+ case IFM_1000_SX:
+ case IFM_1000_T:
+ gmac |= GM_GPCR_SPEED_1000;
+ break;
+ case IFM_100_TX:
+ gmac |= GM_GPCR_SPEED_100;
+ break;
+ case IFM_10_T:
+ break;
+ }
+
+ // Disable Rx flow control
+ if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) == 0) {
+ gmac |= GM_GPCR_FC_RX_DIS;
+ }
+ // Disable Tx flow control
+ if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG1) == 0) {
+ gmac |= GM_GPCR_FC_TX_DIS;
+ }
+ if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) {
+ gmac |= GM_GPCR_DUP_FULL;
+ } else {
+ gmac |= GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS;
+ }
+ gmac |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac);
+ // Read again to ensure writing
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
+ gmac = GMC_PAUSE_OFF;
+ if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) {
+ if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) != 0) {
+ gmac = GMC_PAUSE_ON;
+ }
+ }
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), gmac);
+
+ // Enable PHY interrupt for FIFO underrun/overflow
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR);
+ } else {
+ //
+ // Link state changed to down.
+ // Disable PHY interrupts.
+ //
+ DEBUG ((DEBUG_NET, "Marvell Yukon: msk_miibus_statchg, link down\n"));
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0);
+ // Disable Rx/Tx MAC
+ gmac = GMAC_READ_2 (sc, port, GM_GP_CTRL);
+ if ((GM_GPCR_RX_ENA | GM_GPCR_TX_ENA) != 0) {
+ gmac &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac);
+ // Read again to ensure writing
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
+ }
+ }
+}
+
+UINT32
+ether_crc32_be (
+ const UINT8 *buf,
+ UINTN len
+ )
+{
+ UINTN i;
+ UINT32 crc;
+ UINT32 carry;
+ INTN bit;
+ UINT8 data;
+
+ crc = 0xffffffff; // initial value
+
+ for (i = 0; i < len; i++) {
+ for (data = *buf++, bit = 0; bit < 8; bit++, data >>= 1) {
+ carry = ((crc & 0x80000000) ? 1 : 0) ^ (data & 0x01);
+ crc <<= 1;
+ if (carry) {
+ crc = (crc ^ ETHER_CRC_POLY_BE) | carry;
+ }
+ }
+ }
+
+ return crc;
+}
+
+VOID
+mskc_rxfilter (
+ struct msk_if_softc *sc_if,
+ UINT32 FilterFlags,
+ UINTN MCastFilterCnt,
+ EFI_MAC_ADDRESS *MCastFilter
+ )
+{
+ msk_rxfilter (sc_if, FilterFlags, MCastFilterCnt, MCastFilter);
+}
+
+static VOID
+msk_rxfilter (
+ struct msk_if_softc *sc_if,
+ UINT32 FilterFlags,
+ UINTN MCastFilterCnt,
+ EFI_MAC_ADDRESS *MCastFilter
+ )
+{
+ UINT32 mchash[2];
+ UINT32 crc;
+ UINT16 mode;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ gBS->SetMem (mchash, sizeof (mchash), 0);
+ mode = GMAC_READ_2 (sc, port, GM_RX_CTRL);
+ if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {
+ mode &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
+ }
+ else if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST) != 0) {
+ mode |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
+ mchash[0] = 0xffff;
+ mchash[1] = 0xffff;
+ } else {
+ mode |= GM_RXCR_UCF_ENA;
+ while (MCastFilterCnt-- > 0) {
+ crc = ether_crc32_be (MCastFilter[MCastFilterCnt].Addr, NET_ETHER_ADDR_LEN);
+ /* Just want the 6 least significant bits. */
+ crc &= 0x3f;
+ /* Set the corresponding bit in the hash table. */
+ mchash[crc >> 5] |= 1 << (crc & 0x1f);
+ }
+ if (mchash[0] != 0 || mchash[1] != 0) {
+ mode |= GM_RXCR_MCF_ENA;
+ }
+ }
+
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_RX_CTRL, mode );
+}
+
+static
+VOID
+msk_setvlan (
+ struct msk_if_softc *sc_if
+ )
+{
+ //
+ // Disable automatic VLAN tagging/stripping
+ //
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
+}
+
+static
+EFI_STATUS
+msk_init_rx_ring (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_ring_data *rd;
+ struct msk_rxdesc *rxd;
+ INTN i;
+ INTN prod;
+ INTN nbuf;
+ EFI_STATUS Status;
+
+ sc_if->msk_cdata.msk_rx_cons = 0;
+ sc_if->msk_cdata.msk_rx_prod = 0;
+ sc_if->msk_cdata.msk_rx_putwm = MSK_PUT_WM;
+
+ rd = &sc_if->msk_rdata;
+ gBS->SetMem (rd->msk_rx_ring, MSK_RX_RING_SZ, 0);
+ for (i = prod = 0; i < MSK_RX_RING_CNT; i++) {
+ rxd = &sc_if->msk_cdata.msk_rxdesc[prod];
+ gBS->SetMem (&rxd->rx_m, sizeof (MSK_DMA_BUF), 0);
+ rxd->rx_le = &rd->msk_rx_ring[prod];
+ MSK_INC (prod, MSK_RX_RING_CNT);
+ }
+ nbuf = MSK_RX_BUF_CNT;
+ prod = 0;
+
+ for (i = 0; i < nbuf; i++) {
+ Status = msk_newbuf (sc_if, prod);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ MSK_RX_INC(prod, MSK_RX_RING_CNT);
+ }
+
+ // Update prefetch unit.
+ sc_if->msk_cdata.msk_rx_prod = MSK_RX_RING_CNT - 1;
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+msk_init_tx_ring (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_ring_data *rd;
+ struct msk_txdesc *txd;
+ INTN i;
+
+ sc_if->msk_cdata.msk_tx_prod = 0;
+ sc_if->msk_cdata.msk_tx_cons = 0;
+ sc_if->msk_cdata.msk_tx_cnt = 0;
+ sc_if->msk_cdata.msk_tx_high_addr = 0;
+
+ rd = &sc_if->msk_rdata;
+ gBS->SetMem (rd->msk_tx_ring, sizeof (struct msk_tx_desc) * MSK_TX_RING_CNT, 0);
+ for (i = 0; i < MSK_TX_RING_CNT; i++) {
+ txd = &sc_if->msk_cdata.msk_txdesc[i];
+ gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
+ txd->tx_le = &rd->msk_tx_ring[i];
+ }
+}
+
+static
+__inline
+VOID
+msk_discard_rxbuf (
+ struct msk_if_softc *sc_if,
+ INTN idx
+ )
+{
+ struct msk_rx_desc *rx_le;
+ struct msk_rxdesc *rxd;
+ MSK_DMA_BUF *DmaBuffer;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: discard rxbuf\n"));
+
+#ifdef MSK_64BIT_DMA
+ rxd = &sc_if->msk_cdata.msk_rxdesc[idx];
+ rx_le = rxd->rx_le;
+ rx_le->msk_control = htole32(OP_ADDR64 | HW_OWNER);
+ MSK_INC(idx, MSK_RX_RING_CNT);
+#endif
+
+ rxd = &sc_if->msk_cdata.msk_rxdesc[idx];
+ DmaBuffer = &rxd->rx_m;
+ rx_le = rxd->rx_le;
+ rx_le->msk_control = htole32 (DmaBuffer->Length | OP_PACKET | HW_OWNER);
+}
+
+static
+EFI_STATUS
+msk_newbuf (
+ IN struct msk_if_softc *sc_if,
+ IN INTN idx
+ )
+{
+ struct msk_rx_desc *rx_le;
+ struct msk_rxdesc *rxd;
+ UINTN Length;
+ VOID *Buffer;
+ VOID *Mapping;
+ EFI_PHYSICAL_ADDRESS PhysAddr;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_STATUS Status;
+
+ PciIo = sc_if->msk_softc->PciIo;
+ Length = MAX_SUPPORTED_PACKET_SIZE;
+
+ rxd = &sc_if->msk_cdata.msk_rxdesc[idx];
+
+ Status = gBS->AllocatePool (EfiBootServicesData, Length, &Buffer);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ gBS->SetMem (Buffer, Length, 0);
+
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping);
+ if (EFI_ERROR (Status)) {
+ gBS->FreePool (Buffer);
+ return Status;
+ }
+
+#ifdef MSK_64BIT_DMA
+ rx_le = rxd->rx_le;
+ rx_le->msk_addr = htole32(MSK_ADDR_HI(PhysAddr));
+ rx_le->msk_control = htole32(OP_ADDR64 | HW_OWNER);
+ MSK_INC(idx, MSK_RX_RING_CNT);
+ rxd = &sc_if->msk_cdata.msk_rxdesc[idx];
+#endif
+
+ rxd->rx_m.DmaMapping = Mapping;
+ rxd->rx_m.Buf = Buffer;
+ rxd->rx_m.Length = Length;
+ rx_le = rxd->rx_le;
+ rx_le->msk_addr = htole32 (MSK_ADDR_LO (PhysAddr));
+ rx_le->msk_control = htole32 (Length | OP_PACKET | HW_OWNER);
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+mskc_probe (
+ EFI_PCI_IO_PROTOCOL *PciIo
+ )
+{
+ struct msk_product *mp;
+ UINT16 vendor;
+ UINT16 devid;
+ UINT32 PciID;
+ INTN i;
+ EFI_STATUS Status;
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ PCI_VENDOR_ID_OFFSET,
+ 1,
+ &PciID
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ vendor = PciID & 0xFFFF;
+ devid = PciID >> 16;
+ mp = msk_products;
+ for (i = 0; i < sizeof (msk_products)/sizeof (msk_products[0]); i++, mp++) {
+ if (vendor == mp->msk_vendorid && devid == mp->msk_deviceid) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Probe found device %a\n", mp->msk_name));
+ return EFI_SUCCESS;
+ }
+ }
+ return EFI_UNSUPPORTED;
+}
+
+static
+VOID
+mskc_setup_rambuffer (
+ struct msk_softc *sc
+ )
+{
+ INTN next;
+ INTN i;
+
+ /* Get adapter SRAM size. */
+ sc->msk_ramsize = CSR_READ_1 (sc, B2_E_0) * 4;
+ DEBUG ((DEBUG_NET, "Marvell Yukon: RAM buffer size : %dKB\n", sc->msk_ramsize));
+ if (sc->msk_ramsize == 0) {
+ return;
+ }
+
+ sc->msk_pflags |= MSK_FLAG_RAMBUF;
+ /*
+ * Give receiver 2/3 of memory and round down to the multiple
+ * of 1024. Tx/Rx RAM buffer size of Yukon II shoud be multiple
+ * of 1024.
+ */
+ sc->msk_rxqsize = (((sc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024;
+ sc->msk_txqsize = (sc->msk_ramsize * 1024) - sc->msk_rxqsize;
+ for (i = 0, next = 0; i < sc->msk_num_port; i++) {
+ sc->msk_rxqstart[i] = next;
+ sc->msk_rxqend[i] = next + sc->msk_rxqsize - 1;
+ next = sc->msk_rxqend[i] + 1;
+ sc->msk_txqstart[i] = next;
+ sc->msk_txqend[i] = next + sc->msk_txqsize - 1;
+ next = sc->msk_txqend[i] + 1;
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Port %d : Rx Queue %dKB(0x%08x:0x%08x)\n", i,
+ sc->msk_rxqsize / 1024, sc->msk_rxqstart[i], sc->msk_rxqend[i]));
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Port %d : Tx Queue %dKB(0x%08x:0x%08x)\n", i,
+ sc->msk_txqsize / 1024, sc->msk_txqstart[i], sc->msk_txqend[i]));
+ }
+}
+
+static
+VOID
+msk_phy_power (
+ struct msk_softc *sc,
+ INTN mode
+ )
+{
+ UINT32 our;
+ UINT32 val;
+ INTN i;
+
+ switch (mode) {
+ case MSK_PHY_POWERUP:
+ // Switch power to VCC (WA for VAUX problem)
+ CSR_WRITE_1 (sc, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+
+ // Disable Core Clock Division, set Clock Select to 0
+ CSR_WRITE_4 (sc, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
+
+ val = 0;
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) {
+ // Enable bits are inverted
+ val = Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS;
+ }
+ //
+ // Enable PCI & Core Clock, enable clock gating for both Links.
+ //
+ CSR_WRITE_1 (sc, B2_Y2_CLK_GATE, val);
+
+ val = CSR_PCI_READ_4 (sc, PCI_OUR_REG_1);
+ val &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL) {
+ if (sc->msk_hw_rev > CHIP_REV_YU_XL_A1) {
+ // Deassert Low Power for 1st PHY
+ val |= PCI_Y2_PHY1_COMA;
+ if (sc->msk_num_port > 1) {
+ val |= PCI_Y2_PHY2_COMA;
+ }
+ }
+ }
+ // Release PHY from PowerDown/COMA mode
+ CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_1, val);
+
+ switch (sc->msk_hw_id) {
+ case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
+ case CHIP_ID_YUKON_FE_P:
+ case CHIP_ID_YUKON_UL_2:
+ case CHIP_ID_YUKON_OPT:
+ CSR_WRITE_2 (sc, B0_CTST, Y2_HW_WOL_OFF);
+
+ // Enable all clocks
+ CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_3, 0);
+ our = CSR_PCI_READ_4 (sc, PCI_OUR_REG_4);
+ our &= (PCI_FORCE_ASPM_REQUEST | PCI_ASPM_GPHY_LINK_DOWN | PCI_ASPM_INT_FIFO_EMPTY | PCI_ASPM_CLKRUN_REQUEST);
+ // Set all bits to 0 except bits 15..12
+ CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_4, our);
+ our = CSR_PCI_READ_4 (sc, PCI_OUR_REG_5);
+ our &= PCI_CTL_TIM_VMAIN_AV_MSK;
+ CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_5, our);
+ CSR_PCI_WRITE_4 (sc, PCI_CFG_REG_1, 0);
+ //
+ // Disable status race, workaround for
+ // Yukon EC Ultra & Yukon EX.
+ //
+ val = CSR_READ_4 (sc, B2_GP_IO);
+ val |= GLB_GPIO_STAT_RACE_DIS;
+ CSR_WRITE_4 (sc, B2_GP_IO, val);
+ CSR_READ_4 (sc, B2_GP_IO);
+ break;
+ default:
+ break;
+ }
+ for (i = 0; i < sc->msk_num_port; i++) {
+ CSR_WRITE_2 (sc, MR_ADDR (i, GMAC_LINK_CTRL), GMLC_RST_SET);
+ CSR_WRITE_2 (sc, MR_ADDR (i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+ }
+ break;
+ case MSK_PHY_POWERDOWN:
+ val = CSR_PCI_READ_4 (sc, PCI_OUR_REG_1);
+ val |= PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD;
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) {
+ val &= ~PCI_Y2_PHY1_COMA;
+ if (sc->msk_num_port > 1) {
+ val &= ~PCI_Y2_PHY2_COMA;
+ }
+ }
+ CSR_PCI_WRITE_4 (sc, PCI_OUR_REG_1, val);
+
+ val = Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS;
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL && sc->msk_hw_rev > CHIP_REV_YU_XL_A1) {
+ // Enable bits are inverted
+ val = 0;
+ }
+ //
+ // Disable PCI & Core Clock, disable clock gating for
+ // both Links.
+ //
+ CSR_WRITE_1 (sc, B2_Y2_CLK_GATE, val);
+ CSR_WRITE_1 (sc, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
+ break;
+ default:
+ break;
+ }
+}
+
+static
+VOID
+clear_pci_errors (
+ struct msk_softc *sc
+ )
+{
+ EFI_STATUS Status;
+ UINT16 val;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
+
+ // Clear all error bits in the PCI status register.
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint16,
+ PCI_PRIMARY_STATUS_OFFSET,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Reading PCI Status failed: %r", Status));
+ }
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ val |= PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT |
+ PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT;
+ Status = PciIo->Pci.Write (
+ PciIo,
+ EfiPciIoWidthUint16,
+ PCI_PRIMARY_STATUS_OFFSET,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Writing PCI Status failed: %r", Status));
+ }
+ CSR_WRITE_2 (sc, B0_CTST, CS_MRST_CLR);
+}
+
+static
+VOID
+mskc_reset (
+ struct msk_softc *sc
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS PhysAddr;
+ UINT16 status;
+ UINT32 val;
+ INTN i;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
+
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
+
+ // Disable ASF
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ status = CSR_READ_2 (sc, B28_Y2_ASF_HCU_CCSR);
+ // Clear AHB bridge & microcontroller reset
+ status &= ~(Y2_ASF_HCU_CCSR_AHB_RST | Y2_ASF_HCU_CCSR_CPU_RST_MODE);
+ // Clear ASF microcontroller state
+ status &= ~ Y2_ASF_HCU_CCSR_UC_STATE_MSK;
+ CSR_WRITE_2 (sc, B28_Y2_ASF_HCU_CCSR, status);
+ } else {
+ CSR_WRITE_1 (sc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ }
+ CSR_WRITE_2 (sc, B0_CTST, Y2_ASF_DISABLE);
+
+ //
+ // Since we disabled ASF, S/W reset is required for Power Management.
+ //
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
+
+ clear_pci_errors (sc);
+ switch (sc->msk_bustype) {
+ case MSK_PEX_BUS:
+ // Clear all PEX errors
+ CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);
+ val = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT);
+ if ((val & PEX_RX_OV) != 0) {
+ sc->msk_intrmask &= ~Y2_IS_HW_ERR;
+ sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
+ }
+ break;
+ case MSK_PCI_BUS:
+ case MSK_PCIX_BUS:
+ // Set Cache Line Size to 2 (8bytes) if configured to 0
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CACHELINE_SIZE_OFFSET,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Reading PCI cache line size failed: %r", Status));
+ }
+ if (val == 0) {
+ val = 2;
+ Status = PciIo->Pci.Write (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CACHELINE_SIZE_OFFSET,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Writing PCI cache line size failed: %r", Status));
+ }
+ }
+ if (sc->msk_bustype == MSK_PCIX_BUS) {
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ PCI_OUR_REG_1,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Reading Our Reg 1 failed: %r", Status));
+ }
+ val |= PCI_CLS_OPT;
+ Status = PciIo->Pci.Write (
+ PciIo,
+ EfiPciIoWidthUint32,
+ PCI_OUR_REG_1,
+ 1,
+ &val
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Warning - Writing Our Reg 1 failed: %r", Status));
+ }
+ }
+ break;
+ }
+
+ // Set PHY power state
+ msk_phy_power (sc, MSK_PHY_POWERUP);
+
+ // Reset GPHY/GMAC Control
+ for (i = 0; i < sc->msk_num_port; i++) {
+ // GPHY Control reset
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_UL_2) {
+ // Magic value observed under Linux.
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), 0x00105226);
+ }
+ // GMAC Control reset
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
+ }
+ }
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_OPT) && (sc->msk_hw_rev == 0)) {
+ // Disable PCIe PHY powerdown (reg 0x80, bit7)
+ CSR_WRITE_4 (sc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080);
+ }
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ // LED On
+ CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_ON);
+
+ // Enable plug in go
+ CSR_WRITE_2 (sc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN);
+
+ // Clear TWSI IRQ
+ CSR_WRITE_4 (sc, B2_I2C_IRQ, I2C_CLR_IRQ);
+
+ // Turn off hardware timer
+ CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_STOP);
+ CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_CLR_IRQ);
+
+ // Turn off descriptor polling
+ CSR_WRITE_1 (sc, B28_DPT_CTRL, DPT_STOP);
+
+ // Turn off time stamps
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+
+ // Configure timeout values
+ for (i = 0; i < sc->msk_num_port; i++) {
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET);
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53);
+ }
+
+ // Disable all interrupts
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, 0);
+ CSR_READ_4 (sc, B0_IMSK);
+
+ // Clear status list
+ gBS->SetMem (sc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT, 0);
+ sc->msk_stat_cons = 0;
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_SET);
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_CLR);
+
+ // Set the status list base address
+ PhysAddr = sc->msk_stat_ring_paddr;
+ CSR_WRITE_4 (sc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr));
+ CSR_WRITE_4 (sc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr));
+
+ // Set the status list last index
+ CSR_WRITE_2 (sc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1);
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_EC) && (sc->msk_hw_rev == CHIP_REV_YU_EC_A1)) {
+ // WA for dev. #4.3
+ CSR_WRITE_2 (sc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK);
+ // WA for dev. #4.18
+ CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x21);
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x07);
+ } else {
+ CSR_WRITE_2 (sc, STAT_TX_IDX_TH, 0x0a);
+ CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x10);
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_XL) && (sc->msk_hw_rev == CHIP_REV_YU_XL_A0)) {
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x04);
+ } else {
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x10);
+ }
+ CSR_WRITE_4 (sc, STAT_ISR_TIMER_INI, 0x0190);
+ }
+ //
+ // Use default value for STAT_ISR_TIMER_INI, STAT_LEV_TIMER_INI.
+ //
+ CSR_WRITE_4 (sc, STAT_TX_TIMER_INI, MSK_USECS (sc, 1000));
+
+ // Enable status unit
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_OP_ON);
+
+ CSR_WRITE_1 (sc, STAT_TX_TIMER_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, STAT_LEV_TIMER_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+EFI_STATUS
+mskc_attach_if (
+ struct msk_if_softc *sc_if,
+ UINTN Port
+ )
+{
+ INTN i;
+ EFI_STATUS Status;
+
+ sc_if->msk_md.port = Port;
+ sc_if->msk_flags = sc_if->msk_softc->msk_pflags;
+
+ // Setup Tx/Rx queue register offsets
+ if (Port == MSK_PORT_A) {
+ sc_if->msk_txq = Q_XA1;
+ sc_if->msk_txsq = Q_XS1;
+ sc_if->msk_rxq = Q_R1;
+ } else {
+ sc_if->msk_txq = Q_XA2;
+ sc_if->msk_txsq = Q_XS2;
+ sc_if->msk_rxq = Q_R2;
+ }
+
+ Status = msk_txrx_dma_alloc (sc_if);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ /*
+ * Get station address for this interface. Note that
+ * dual port cards actually come with three station
+ * addresses: one for each port, plus an extra. The
+ * extra one is used by the SysKonnect driver software
+ * as a 'virtual' station address for when both ports
+ * are operating in failover mode. Currently we don't
+ * use this extra address.
+ */
+ for (i = 0; i < NET_ETHER_ADDR_LEN; i++) {
+ sc_if->MacAddress.Addr[i] = CSR_READ_1 (sc_if->msk_softc, B2_MAC_1 + (Port * 8) + i);
+ }
+
+ DEBUG ((DEBUG_NET,"Marvell Yukon: Mac Address %02x:%02x:%02x:%02x:%02x:%02x\n",
+ sc_if->MacAddress.Addr[0], sc_if->MacAddress.Addr[1], sc_if->MacAddress.Addr[2],
+ sc_if->MacAddress.Addr[3], sc_if->MacAddress.Addr[4], sc_if->MacAddress.Addr[5]));
+
+ Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md, sc_if, &sc_if->phy_softc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ InitializeListHead (&sc_if->TransmitQueueHead);
+ InitializeListHead (&sc_if->TransmitFreeQueueHead);
+ InitializeListHead (&sc_if->ReceiveQueueHead);
+ sc_if->active = TRUE;
+
+ return (Status);
+}
+
+/*
+ * Attach the interface. Allocate softc structures, do ifmedia
+ * setup and ethernet/BPF attach.
+ */
+EFI_STATUS
+mskc_attach (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ OUT struct msk_softc **ScData
+ )
+{
+ struct msk_mii_data *mmd;
+ UINT64 Supports;
+ UINT8 *PciBarResources;
+ EFI_STATUS Status;
+ struct msk_if_softc *ScIf;
+ struct msk_softc *sc;
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (struct msk_softc),
+ (VOID**) &sc);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Save original PCI attributes
+ //
+ gBS->SetMem (sc, sizeof (struct msk_softc), 0);
+ sc->PciIo = PciIo;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &sc->OriginalPciAttributes
+ );
+ if (EFI_ERROR (Status)) {
+ gBS->FreePool (sc);
+ return Status;
+ }
+
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+ if (!EFI_ERROR (Status)) {
+ Supports &= EFI_PCI_DEVICE_ENABLE;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationEnable,
+ Supports | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
+ NULL
+ );
+ }
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Failed to enable NIC controller\n"));
+ goto RESTORE_PCI_ATTRIBS;
+ }
+
+ Status = PciIo->GetBarAttributes (PciIo, 0, &Supports, (VOID**)&PciBarResources);
+ if (!EFI_ERROR (Status) && (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR)) {
+ if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {
+ if (!(((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->SpecificFlag & ACPI_SPECFLAG_PREFETCHABLE)) {
+ sc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin;
+ // Should assert that Bar is 32 bits wide
+ DEBUG ((DEBUG_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", sc->RegBase));
+ } else {
+ Status = EFI_NOT_FOUND;
+ }
+ } else {
+ Status = EFI_NOT_FOUND;
+ }
+ }
+ if (EFI_ERROR (Status)) {
+ goto RESTORE_PCI_ATTRIBS;
+ }
+
+ // Clear Software Reset
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
+
+ // Get Hardware ID & Revision
+ sc->msk_hw_id = CSR_READ_1 (sc, B2_CHIP_ID);
+ sc->msk_hw_rev = (CSR_READ_1 (sc, B2_MAC_CFG) >> 4) & 0x0f;
+
+ // Bail out if chip is not recognized
+ if (sc->msk_hw_id < CHIP_ID_YUKON_XL ||
+ sc->msk_hw_id > CHIP_ID_YUKON_OPT ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR ||
+ sc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", sc->msk_hw_id, sc->msk_hw_rev));
+ Status = EFI_DEVICE_ERROR;
+ goto RESTORE_PCI_ATTRIBS;
+ }
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Marvell Technology Group Ltd. %a Id:0x%02x Rev:0x%02x\n",
+ model_name[sc->msk_hw_id - CHIP_ID_YUKON_XL], sc->msk_hw_id, sc->msk_hw_rev));
+
+ sc->msk_process_limit = MSK_PROC_DEFAULT;
+ sc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT;
+
+ // Check if MAC address is valid
+ if ((CSR_READ_4 (sc, B2_MAC_1) == 0) && (CSR_READ_4 (sc, B2_MAC_1+4) == 0)) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: MAC address is invalid (00:00:00:00:00:00)\n"));
+ }
+
+ // Soft reset
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
+ sc->msk_pmd = CSR_READ_1 (sc, B2_PMD_TYP);
+
+ // Check number of MACs
+ sc->msk_num_port = 1;
+ if ((CSR_READ_1 (sc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(CSR_READ_1 (sc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) {
+ sc->msk_num_port++;
+ }
+ }
+
+ /* Check bus type. */
+ sc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */
+ sc->msk_expcap = 1;
+
+ switch (sc->msk_hw_id) {
+ case CHIP_ID_YUKON_EC:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
+ break;
+ case CHIP_ID_YUKON_EC_U:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM;
+ break;
+ case CHIP_ID_YUKON_EX:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
+ /*
+ * Yukon Extreme seems to have silicon bug for
+ * automatic Tx checksum calculation capability.
+ */
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
+ sc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM;
+ }
+ /*
+ * Yukon Extreme A0 could not use store-and-forward
+ * for jumbo frames, so disable Tx checksum
+ * offloading for jumbo frames.
+ */
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_A0) {
+ sc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM;
+ }
+ break;
+ case CHIP_ID_YUKON_FE:
+ sc->msk_clock = 100; /* 100 MHz */
+ sc->msk_pflags |= MSK_FLAG_FASTETHER;
+ break;
+ case CHIP_ID_YUKON_FE_P:
+ sc->msk_clock = 50; /* 50 MHz */
+ sc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
+ if (sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ /*
+ * XXX
+ * FE+ A0 has status LE writeback bug so msk (4)
+ * does not rely on status word of received frame
+ * in msk_rxeof () which in turn disables all
+ * hardware assistance bits reported by the status
+ * word as well as validity of the recevied frame.
+ * Just pass received frames to upper stack with
+ * minimal test and let upper stack handle them.
+ */
+ sc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM;
+ }
+ break;
+ case CHIP_ID_YUKON_XL:
+ sc->msk_clock = 156; /* 156 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
+ break;
+ case CHIP_ID_YUKON_UL_2:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
+ break;
+ case CHIP_ID_YUKON_OPT:
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2;
+ break;
+ default:
+ sc->msk_clock = 156; /* 156 MHz */
+ break;
+ }
+
+ Status = msk_status_dma_alloc (sc);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+
+ // Set base interrupt mask
+ sc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU;
+ sc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP;
+
+ // Reset the adapter
+ mskc_reset (sc);
+
+ mskc_setup_rambuffer (sc);
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (struct msk_if_softc),
+ (VOID**) &ScIf);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+ gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
+ ScIf->msk_softc = sc;
+ sc->msk_if[MSK_PORT_A] = ScIf;
+ Status = mskc_attach_if (sc->msk_if[MSK_PORT_A], MSK_PORT_A);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+
+ mmd = &ScIf->msk_md;
+ mmd->port = MSK_PORT_A;
+ mmd->pmd = sc->msk_pmd;
+ if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') {
+ mmd->mii_flags |= MIIF_HAVEFIBER;
+ }
+
+ if (sc->msk_num_port > 1) {
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (struct msk_if_softc),
+ (VOID**) &ScIf);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+ gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
+ ScIf->msk_softc = sc;
+ sc->msk_if[MSK_PORT_B] = ScIf;
+ Status = mskc_attach_if (sc->msk_if[MSK_PORT_B], MSK_PORT_B);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+
+ mmd = &ScIf->msk_md;
+ mmd->port = MSK_PORT_B;
+ mmd->pmd = sc->msk_pmd;
+ if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') {
+ mmd->mii_flags |= MIIF_HAVEFIBER;
+ }
+ }
+
+ // Return new msk_softc structure
+ *ScData = sc;
+
+ // Create timer for tick
+ Status = gBS->CreateEvent (
+ EVT_NOTIFY_SIGNAL | EVT_TIMER,
+ TPL_CALLBACK,
+ mskc_tick,
+ (VOID *)sc,
+ &sc->Timer
+ );
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+
+ Status = gBS->SetTimer (sc->Timer, TimerPeriodic, TICKS_PER_SECOND);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
+
+fail:
+ if (EFI_ERROR (Status)) {
+ mskc_detach (sc);
+ }
+
+ return (Status);
+
+RESTORE_PCI_ATTRIBS:
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ sc->OriginalPciAttributes,
+ NULL
+ );
+ gBS->FreePool (sc);
+ return Status;
+}
+
+/*
+ * Shutdown hardware and free up resources. This can be called any
+ * time after the mutex has been initialized. It is called in both
+ * the error case in attach and the normal detach case so it needs
+ * to be careful about only freeing resources that have actually been
+ * allocated.
+ */
+VOID
+mskc_detach_if (
+ struct msk_if_softc *sc_if
+ )
+{
+ if (sc_if->active) {
+ mskc_stop_if (sc_if);
+ msk_txrx_dma_free (sc_if);
+ e1000phy_detach (sc_if->phy_softc);
+ sc_if->phy_softc = NULL;
+ sc_if->active = FALSE;
+ }
+}
+
+VOID
+mskc_detach (
+ struct msk_softc *sc
+ )
+{
+ EFI_TPL OldTpl;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ if (sc == NULL) {
+ return;
+ }
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ PciIo = sc->PciIo;
+
+ if (sc->msk_if[MSK_PORT_A] != NULL) {
+ mskc_detach_if (sc->msk_if[MSK_PORT_A]);
+ gBS->FreePool (sc->msk_if[MSK_PORT_A]);
+ sc->msk_if[MSK_PORT_A] = NULL;
+ }
+ if (sc->msk_if[MSK_PORT_B] != NULL) {
+ mskc_detach_if (sc->msk_if[MSK_PORT_B]);
+ gBS->FreePool (sc->msk_if[MSK_PORT_B]);
+ sc->msk_if[MSK_PORT_B] = NULL;
+ }
+
+ /* Disable all interrupts. */
+ CSR_WRITE_4 (sc, B0_IMSK, 0);
+ CSR_READ_4 (sc, B0_IMSK);
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+
+ // LED Off.
+ CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_OFF);
+
+ // Put hardware reset.
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+
+ msk_status_dma_free (sc);
+
+ if (sc->Timer != NULL) {
+ gBS->SetTimer (sc->Timer, TimerCancel, 0);
+ gBS->CloseEvent (sc->Timer);
+
+ sc->Timer = NULL;
+ }
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ sc->OriginalPciAttributes,
+ NULL
+ );
+
+ gBS->RestoreTPL (OldTpl);
+}
+
+/* Create status DMA region. */
+static
+EFI_STATUS
+msk_status_dma_alloc (
+ struct msk_softc *sc
+ )
+{
+ EFI_STATUS Status;
+ UINTN Length;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
+
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
+ EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&sc->msk_stat_ring, 0);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to allocate DMA'able memory for status ring\n"));
+ return Status;
+ }
+ ASSERT (sc->msk_stat_ring != NULL);
+
+ Length = MSK_STAT_RING_SZ;
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc->msk_stat_ring,
+ &Length, &sc->msk_stat_ring_paddr, &sc->msk_stat_map);
+ ASSERT (Length == MSK_STAT_RING_SZ);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to map DMA'able memory for status ring\n"));
+ }
+
+ return Status;
+}
+
+static
+VOID
+msk_status_dma_free (
+ struct msk_softc *sc
+ )
+{
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
+
+ if (sc->msk_stat_map) {
+ PciIo->Unmap (PciIo, sc->msk_stat_map);
+ if (sc->msk_stat_ring) {
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), sc->msk_stat_ring);
+ sc->msk_stat_ring = NULL;
+ }
+ sc->msk_stat_map = NULL;
+ }
+}
+
+static
+EFI_STATUS
+msk_txrx_dma_alloc (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_txdesc *txd;
+ struct msk_rxdesc *rxd;
+ INTN i;
+ UINTN Length;
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc_if->msk_softc->PciIo;
+
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
+ EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_tx_ring, 0);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to allocate DMA'able memory for Tx ring\n"));
+ goto fail;
+ }
+ ASSERT (sc_if->msk_rdata.msk_tx_ring != NULL);
+
+ Length = MSK_TX_RING_SZ;
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring,
+ &Length, &sc_if->msk_rdata.msk_tx_ring_paddr, &sc_if->msk_cdata.msk_tx_ring_map);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to map DMA'able memory for Tx ring\n"));
+ goto fail;
+ }
+ ASSERT (Length == MSK_TX_RING_SZ);
+
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
+ EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_rx_ring, 0);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to allocate DMA'able memory for Rx ring\n"));
+ goto fail;
+ }
+ ASSERT (sc_if->msk_rdata.msk_rx_ring != NULL);
+
+ Length = MSK_RX_RING_SZ;
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring,
+ &Length, &sc_if->msk_rdata.msk_rx_ring_paddr, &sc_if->msk_cdata.msk_rx_ring_map);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to map DMA'able memory for Rx ring\n"));
+ goto fail;
+ }
+ ASSERT (Length == MSK_RX_RING_SZ);
+
+ // Create DMA maps for Tx buffers.
+ for (i = 0; i < MSK_TX_RING_CNT; i++) {
+ txd = &sc_if->msk_cdata.msk_txdesc[i];
+ gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
+ }
+ // Create DMA maps for Rx buffers.
+ for (i = 0; i < MSK_RX_RING_CNT; i++) {
+ rxd = &sc_if->msk_cdata.msk_rxdesc[i];
+ gBS->SetMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF), 0);
+ }
+
+fail:
+ return (Status);
+}
+
+static
+VOID
+msk_txrx_dma_free (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_txdesc *txd;
+ struct msk_rxdesc *rxd;
+ INTN i;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc_if->msk_softc->PciIo;
+
+ // Tx ring
+ if (sc_if->msk_cdata.msk_tx_ring_map) {
+ PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_tx_ring_map);
+ if (sc_if->msk_rdata.msk_tx_ring) {
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring);
+ sc_if->msk_rdata.msk_tx_ring = NULL;
+ }
+ sc_if->msk_cdata.msk_tx_ring_map = NULL;
+ }
+
+ // Rx ring
+ if (sc_if->msk_cdata.msk_rx_ring_map) {
+ PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_rx_ring_map);
+ if (sc_if->msk_rdata.msk_rx_ring) {
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring);
+ sc_if->msk_rdata.msk_rx_ring = NULL;
+ }
+ sc_if->msk_cdata.msk_rx_ring_map = NULL;
+ }
+
+ // Tx buffers
+ for (i = 0; i < MSK_TX_RING_CNT; i++) {
+ txd = &sc_if->msk_cdata.msk_txdesc[i];
+ if (txd->tx_m.DmaMapping) {
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
+ gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
+ // We don't own the transmit buffers so don't free them
+ }
+ }
+ // Rx buffers
+ for (i = 0; i < MSK_RX_RING_CNT; i++) {
+ rxd = &sc_if->msk_cdata.msk_rxdesc[i];
+ if (rxd->rx_m.DmaMapping) {
+ PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
+ // Free Rx buffers as we own these
+ if(rxd->rx_m.Buf != NULL) {
+ gBS->FreePool (rxd->rx_m.Buf);
+ rxd->rx_m.Buf = NULL;
+ }
+ gBS->SetMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF), 0);
+ }
+ }
+}
+
+static
+EFI_STATUS
+msk_encap (
+ struct msk_if_softc *sc_if,
+ MSK_SYSTEM_BUF *m_head
+ )
+{
+ struct msk_txdesc *txd;
+ struct msk_txdesc *txd_last;
+ struct msk_tx_desc *tx_le;
+ VOID *Mapping;
+ EFI_PHYSICAL_ADDRESS BusPhysAddr;
+ UINTN BusLength;
+ UINT32 control;
+ UINT32 prod;
+ UINT32 si;
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc_if->msk_softc->PciIo;
+ prod = sc_if->msk_cdata.msk_tx_prod;
+ txd = &sc_if->msk_cdata.msk_txdesc[prod];
+ txd_last = txd;
+ BusLength = m_head->Length;
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterRead, m_head->Buf,
+ &BusLength, &BusPhysAddr, &txd->tx_m.DmaMapping);
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: failed to map DMA'able memory for Tx buffer\n"));
+ return Status;
+ }
+ ASSERT (BusLength == m_head->Length);
+
+ control = 0;
+
+#ifdef MSK_64BIT_DMA
+ if (MSK_ADDR_HI(BusPhysAddr) !=
+ sc_if->msk_cdata.msk_tx_high_addr) {
+ sc_if->msk_cdata.msk_tx_high_addr =
+ MSK_ADDR_HI(BusPhysAddr);
+ tx_le = &sc_if->msk_rdata.msk_tx_ring[prod];
+ tx_le->msk_addr = htole32(MSK_ADDR_HI(BusPhysAddr));
+ tx_le->msk_control = htole32(OP_ADDR64 | HW_OWNER);
+ sc_if->msk_cdata.msk_tx_cnt++;
+ MSK_INC(prod, MSK_TX_RING_CNT);
+ }
+#endif
+
+ si = prod;
+ tx_le = &sc_if->msk_rdata.msk_tx_ring[prod];
+ tx_le->msk_addr = htole32 (MSK_ADDR_LO (BusPhysAddr));
+ tx_le->msk_control = htole32 (BusLength | control | OP_PACKET);
+ sc_if->msk_cdata.msk_tx_cnt++;
+ MSK_INC (prod, MSK_TX_RING_CNT);
+
+ // Update producer index
+ sc_if->msk_cdata.msk_tx_prod = prod;
+
+ // Set EOP on the last descriptor
+ prod = (prod + MSK_TX_RING_CNT - 1) % MSK_TX_RING_CNT;
+ tx_le = &sc_if->msk_rdata.msk_tx_ring[prod];
+ tx_le->msk_control |= htole32 (EOP);
+
+ // Turn the first descriptor ownership to hardware
+ tx_le = &sc_if->msk_rdata.msk_tx_ring[si];
+ tx_le->msk_control |= htole32 (HW_OWNER);
+
+ txd = &sc_if->msk_cdata.msk_txdesc[prod];
+ Mapping = txd_last->tx_m.DmaMapping;
+ txd_last->tx_m.DmaMapping = txd->tx_m.DmaMapping;
+ txd->tx_m.DmaMapping = Mapping;
+ txd->tx_m.Buf = m_head->Buf;
+ txd->tx_m.Length = m_head->Length;
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+mskc_transmit (
+ struct msk_if_softc *sc_if,
+ UINTN BufferSize,
+ VOID *Buffer
+ )
+{
+ MSK_LINKED_SYSTEM_BUF *LinkedSystemBuf;
+ EFI_STATUS Status;
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (MSK_LINKED_SYSTEM_BUF),
+ (VOID**) &LinkedSystemBuf);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ gBS->SetMem (LinkedSystemBuf, sizeof (MSK_LINKED_SYSTEM_BUF), 0);
+ LinkedSystemBuf->Signature = TX_MBUF_SIGNATURE;
+ //
+ // Add the passed Buffer to the transmit queue. Don't copy.
+ //
+ LinkedSystemBuf->SystemBuf.Buf = Buffer;
+ LinkedSystemBuf->SystemBuf.Length = BufferSize;
+ InsertTailList (&sc_if->TransmitQueueHead, &LinkedSystemBuf->Link);
+ msk_start (sc_if);
+ return EFI_SUCCESS;
+}
+
+void
+mskc_getstatus (
+ struct msk_if_softc *sc_if,
+ OUT UINT32 *InterruptStatus, OPTIONAL
+ OUT VOID **TxBuf OPTIONAL
+ )
+{
+ MSK_LINKED_SYSTEM_BUF *m_head;
+
+ // Interrupt status is not read from the device when InterruptStatus is NULL
+ if (InterruptStatus != NULL) {
+ // Check the interrupt lines
+ msk_intr (sc_if->msk_softc);
+ }
+
+ // The transmit buffer status is not read when TxBuf is NULL
+ if (TxBuf != NULL) {
+ *((UINT8 **) TxBuf) = (UINT8 *) 0;
+ if (!IsListEmpty (&sc_if->TransmitFreeQueueHead))
+ {
+ m_head = CR (GetFirstNode (&sc_if->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
+ if(m_head != NULL) {
+ *TxBuf = m_head->SystemBuf.Buf;
+ RemoveEntryList (&m_head->Link);
+ gBS->FreePool (m_head);
+ }
+ }
+ }
+}
+
+static
+VOID
+msk_start (
+ struct msk_if_softc *sc_if
+ )
+{
+ EFI_STATUS Status;
+ MSK_LINKED_SYSTEM_BUF *m_head;
+ INTN enq;
+
+ for (enq = 0; !IsListEmpty (&sc_if->TransmitQueueHead) &&
+ sc_if->msk_cdata.msk_tx_cnt < (MSK_TX_RING_CNT - MSK_RESERVED_TX_DESC_CNT); )
+ {
+
+ m_head = CR (GetFirstNode (&sc_if->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
+ if (m_head == NULL) {
+ break;
+ }
+ //
+ // Pack the data into the transmit ring. If we
+ // don't have room, set the OACTIVE flag and wait
+ // for the NIC to drain the ring.
+ //
+ Status = msk_encap (sc_if, &m_head->SystemBuf);
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ RemoveEntryList (&m_head->Link);
+ InsertTailList (&sc_if->TransmitFreeQueueHead, &m_head->Link);
+ enq++;
+ }
+
+ if (enq > 0) {
+ // Transmit
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG),
+ sc_if->msk_cdata.msk_tx_prod);
+ }
+}
+
+VOID
+mskc_shutdown (
+ struct msk_softc *sc
+ )
+{
+ INTN i;
+ EFI_TPL OldTpl;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ for (i = 0; i < sc->msk_num_port; i++) {
+ if (sc->msk_if[i] != NULL) {
+ mskc_stop_if (sc->msk_if[i]);
+ }
+ }
+ gBS->SetTimer (sc->Timer, TimerCancel, 0);
+
+ /* Put hardware reset. */
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+
+ gBS->RestoreTPL (OldTpl);
+}
+
+EFI_STATUS
+mskc_receive (
+ struct msk_if_softc *sc_if,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ MSK_LINKED_SYSTEM_BUF *mBuf;
+
+ msk_intr (sc_if->msk_softc); // check the interrupt lines
+
+ if (IsListEmpty (&sc_if->ReceiveQueueHead)) {
+ *BufferSize = 0;
+ return EFI_NOT_READY;
+ }
+
+ mBuf = CR (GetFirstNode (&sc_if->ReceiveQueueHead), MSK_LINKED_SYSTEM_BUF, Link, RX_MBUF_SIGNATURE);
+ if (mBuf->SystemBuf.Length > *BufferSize) {
+ *BufferSize = mBuf->SystemBuf.Length;
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Receive buffer is too small: Provided = %d, Received = %d\n",
+ *BufferSize, mBuf->SystemBuf.Length));
+ return EFI_BUFFER_TOO_SMALL;
+ }
+ *BufferSize = mBuf->SystemBuf.Length;
+ RemoveEntryList (&mBuf->Link);
+ gBS->CopyMem (Buffer, mBuf->SystemBuf.Buf, *BufferSize);
+ gBS->FreePool(mBuf->SystemBuf.Buf);
+ gBS->FreePool (mBuf);
+ return EFI_SUCCESS;
+}
+
+static VOID
+msk_rxeof (
+ struct msk_if_softc *sc_if,
+ UINT32 status,
+ UINT32 control,
+ INTN len
+ )
+{
+ EFI_STATUS Status;
+ MSK_LINKED_SYSTEM_BUF *m_link;
+ struct msk_rxdesc *rxd;
+ INTN cons;
+ INTN rxlen;
+ MSK_DMA_BUF m;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: rxeof\n"));
+
+ PciIo = sc_if->msk_softc->PciIo;
+ cons = sc_if->msk_cdata.msk_rx_cons;
+ do {
+ rxlen = status >> 16;
+ if ((sc_if->msk_flags & MSK_FLAG_NORXCHK) != 0) {
+ //
+ // For controllers that returns bogus status code
+ // just do minimal check and let upper stack
+ // handle this frame.
+ //
+ if (len > MAX_SUPPORTED_PACKET_SIZE || len < NET_ETHER_ADDR_LEN) {
+ msk_discard_rxbuf (sc_if, cons);
+ break;
+ }
+ } else if (len > sc_if->msk_framesize ||
+ ((status & GMR_FS_ANY_ERR) != 0) ||
+ ((status & GMR_FS_RX_OK) == 0) || (rxlen != len)) {
+ msk_discard_rxbuf (sc_if, cons);
+ break;
+ }
+
+#ifdef MSK_64BIT_DMA
+ rxd = &sc_if->msk_cdata.msk_rxdesc[(cons + 1) % MSK_RX_RING_CNT];
+#else
+ rxd = &sc_if->msk_cdata.msk_rxdesc[cons];
+#endif
+
+ m.Buf = rxd->rx_m.Buf;
+ m.DmaMapping = rxd->rx_m.DmaMapping;
+ m.Length = rxd->rx_m.Length;
+
+ Status = msk_newbuf (sc_if, cons);
+ if (EFI_ERROR (Status)) {
+ // This is a dropped packet, but we aren't counting drops
+ // Reuse old buffer
+ msk_discard_rxbuf (sc_if, cons);
+ break;
+ }
+
+ Status = PciIo->Flush (PciIo);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: failed to Flush DMA\n"));
+ }
+
+ Status = PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: failed to Unmap DMA\n"));
+ }
+
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (MSK_LINKED_SYSTEM_BUF),
+ (VOID**) &m_link);
+ if (!EFI_ERROR (Status)) {
+ gBS->SetMem (m_link, sizeof (MSK_LINKED_SYSTEM_BUF), 0);
+ m_link->Signature = RX_MBUF_SIGNATURE;
+ m_link->SystemBuf.Buf = m.Buf;
+ m_link->SystemBuf.Length = len;
+
+ InsertTailList (&sc_if->ReceiveQueueHead, &m_link->Link);
+ } else {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: failed to allocate receive buffer link. Dropping Frame\n"));
+ gBS->FreePool (m.Buf);
+ }
+ } while (0);
+
+ MSK_RX_INC (sc_if->msk_cdata.msk_rx_cons, MSK_RX_RING_CNT);
+ MSK_RX_INC (sc_if->msk_cdata.msk_rx_prod, MSK_RX_RING_CNT);
+}
+
+static
+VOID
+msk_txeof (
+ struct msk_if_softc *sc_if,
+ INTN idx
+ )
+{
+ struct msk_txdesc *txd;
+ struct msk_tx_desc *cur_tx;
+ UINT32 control;
+ INTN cons;
+ INTN prog;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ DEBUG ((DEBUG_NET, "Marvell Yukon: txeof\n"));
+
+ PciIo = sc_if->msk_softc->PciIo;
+
+ //
+ // Go through our tx ring and free mbufs for those
+ // frames that have been sent.
+ //
+ cons = sc_if->msk_cdata.msk_tx_cons;
+ prog = 0;
+ for (; cons != idx; MSK_INC (cons, MSK_TX_RING_CNT)) {
+ if (sc_if->msk_cdata.msk_tx_cnt <= 0) {
+ break;
+ }
+ prog++;
+ cur_tx = &sc_if->msk_rdata.msk_tx_ring[cons];
+ control = le32toh (cur_tx->msk_control);
+ sc_if->msk_cdata.msk_tx_cnt--;
+ if ((control & EOP) == 0) {
+ continue;
+ }
+ txd = &sc_if->msk_cdata.msk_txdesc[cons];
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
+ gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
+ // We don't own the transmit buffers so don't free them
+ }
+
+ if (prog > 0) {
+ sc_if->msk_cdata.msk_tx_cons = cons;
+ // No need to sync LEs as we didn't update LEs.
+ }
+}
+
+VOID
+mskc_tick (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_TPL OldTpl;
+ struct msk_softc *sc;
+
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ sc = (struct msk_softc *)Context;
+
+ if (sc->msk_if[MSK_PORT_A] != NULL && sc->msk_if[MSK_PORT_A]->active) {
+ e1000phy_tick (sc->msk_if[MSK_PORT_A]->phy_softc);
+ }
+ if (sc->msk_if[MSK_PORT_B] != NULL && sc->msk_if[MSK_PORT_B]->active) {
+ e1000phy_tick (sc->msk_if[MSK_PORT_B]->phy_softc);
+ }
+
+ msk_handle_events (sc);
+
+ gBS->RestoreTPL (OldTpl);
+}
+
+static
+VOID
+msk_intr_phy (
+ struct msk_if_softc *sc_if
+ )
+{
+ UINT16 status;
+
+ msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
+ status = msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
+
+ // Handle FIFO Underrun/Overflow ?
+ if ((status & PHY_M_IS_FIFO_ERROR)) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: PHY FIFO underrun/overflow.\n"));
+ }
+}
+
+static
+VOID
+msk_intr_gmac (
+ struct msk_if_softc *sc_if
+ )
+{
+ UINT8 status;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+
+ status = CSR_READ_1 (sc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC));
+
+ // GMAC Rx FIFO overrun.
+ if ((status & GM_IS_RX_FF_OR) != 0) {
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
+ }
+ // GMAC Tx FIFO underrun.
+ if ((status & GM_IS_TX_FF_UR) != 0) {
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
+ //device_printf (sc_if->msk_if_dev, "Tx FIFO underrun!\n");*/
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Tx FIFO underrun!\n"));
+ /*
+ * XXX
+ * In case of Tx underrun, we may need to flush/reset
+ * Tx MAC but that would also require resynchronization
+ * with status LEs. Reintializing status LEs would
+ * affect other port in dual MAC configuration so it
+ * should be aVOIDed as possible as we can.
+ * Due to lack of documentation it's all vague guess but
+ * it needs more investigation.
+ */
+ }
+}
+
+static
+VOID
+msk_handle_hwerr (
+ struct msk_if_softc *sc_if,
+ UINT32 status
+ )
+{
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+
+ if ((status & Y2_IS_PAR_RD1) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: RAM buffer read parity error\n"));
+ // Clear IRQ.
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR);
+ }
+ if ((status & Y2_IS_PAR_WR1) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: RAM buffer write parity error\n"));
+ // Clear IRQ
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR);
+ }
+ if ((status & Y2_IS_PAR_MAC1) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Tx MAC parity error\n"));
+ // Clear IRQ
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
+ }
+ if ((status & Y2_IS_PAR_RX1) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Rx parity error\n"));
+ // Clear IRQ
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR);
+ }
+ if ((status & (Y2_IS_TCP_TXS1 | Y2_IS_TCP_TXA1)) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: TCP segmentation error\n"));
+ // Clear IRQ
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP);
+ }
+}
+
+static
+VOID
+msk_intr_hwerr (
+ struct msk_softc *sc
+ )
+{
+ UINT32 status;
+ UINT32 tlphead[4];
+
+ status = CSR_READ_4 (sc, B0_HWE_ISRC);
+
+ // Time Stamp timer overflow.
+ if ((status & Y2_IS_TIST_OV) != 0) {
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+ }
+ if ((status & Y2_IS_PCI_NEXP) != 0) {
+ /*
+ * PCI Express Error occured which is not described in PEX
+ * spec.
+ * This error is also mapped either to Master Abort (
+ * Y2_IS_MST_ERR) or Target Abort (Y2_IS_IRQ_STAT) bit and
+ * can only be cleared there.
+ */
+ DEBUG ((DEBUG_NET, "Marvell Yukon: PCI Express protocol violation error\n"));
+ }
+
+ if ((status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) != 0) {
+
+ if ((status & Y2_IS_MST_ERR) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: unexpected IRQ Status error\n"));
+ } else {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: unexpected IRQ Master error\n"));
+ }
+ // Reset all bits in the PCI status register
+ clear_pci_errors (sc);
+ }
+
+ // Check for PCI Express Uncorrectable Error.
+ if ((status & Y2_IS_PCI_EXP) != 0) {
+ UINT32 v32;
+
+ /*
+ * On PCI Express bus bridges are called root complexes (RC).
+ * PCI Express errors are recognized by the root complex too,
+ * which requests the system to handle the problem. After
+ * error occurrence it may be that no access to the adapter
+ * may be performed any longer.
+ */
+
+ v32 = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT);
+ if ((v32 & PEX_UNSUP_REQ) != 0) {
+ // Ignore unsupported request error.
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Uncorrectable PCI Express error\n"));
+ }
+ if ((v32 & (PEX_FATAL_ERRORS | PEX_POIS_TLP)) != 0) {
+ INTN i;
+
+ // Get TLP header form Log Registers.
+ for (i = 0; i < 4; i++) {
+ tlphead[i] = CSR_PCI_READ_4 (sc, PEX_HEADER_LOG + i * 4);
+ }
+ // Check for vendor defined broadcast message.
+ if (!(tlphead[0] == 0x73004001 && tlphead[1] == 0x7f)) {
+ sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ }
+ }
+ // Clear the interrupt
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ }
+
+ if ((status & Y2_HWE_L1_MASK) != 0 && sc->msk_if[MSK_PORT_A] != NULL) {
+ msk_handle_hwerr (sc->msk_if[MSK_PORT_A], status);
+ }
+ if ((status & Y2_HWE_L2_MASK) != 0 && sc->msk_if[MSK_PORT_B] != NULL) {
+ msk_handle_hwerr (sc->msk_if[MSK_PORT_B], status >> 8);
+ }
+}
+
+static
+__inline
+VOID
+msk_rxput (
+ struct msk_if_softc *sc_if
+ )
+{
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
+}
+
+static
+INTN
+msk_handle_events (
+ struct msk_softc *sc
+ )
+{
+ INTN rxput[2];
+ struct msk_stat_desc *sd;
+ UINT32 control;
+ UINT32 status;
+ INTN cons;
+ INTN len;
+ INTN port;
+ INTN rxprog;
+ struct msk_if_softc *sc_if;
+
+ if (sc->msk_stat_cons == CSR_READ_2 (sc, STAT_PUT_IDX)) {
+ return (0);
+ }
+
+ rxput[MSK_PORT_A] = rxput[MSK_PORT_B] = 0;
+ rxprog = 0;
+ cons = sc->msk_stat_cons;
+ for (;;) {
+ sd = &sc->msk_stat_ring[cons];
+ control = le32toh (sd->msk_control);
+ if ((control & HW_OWNER) == 0) {
+ break;
+ }
+ control &= ~HW_OWNER;
+ sd->msk_control = htole32 (control);
+ status = le32toh (sd->msk_status);
+ len = control & STLE_LEN_MASK;
+ port = (control >> 16) & 0x01;
+ sc_if = sc->msk_if[port];
+ if (sc_if == NULL) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: invalid port opcode 0x%08x\n", control & STLE_OP_MASK));
+ continue;
+ }
+
+ switch (control & STLE_OP_MASK) {
+ case OP_RXSTAT:
+ msk_rxeof (sc_if, status, control, len);
+ rxprog++;
+ //
+ // Because there is no way to sync single Rx LE
+ // put the DMA sync operation off until the end of
+ // event processing.
+ //
+ rxput[port]++;
+ // Update prefetch unit if we've passed water mark
+ if (rxput[port] >= sc_if->msk_cdata.msk_rx_putwm) {
+ msk_rxput (sc_if);
+ rxput[port] = 0;
+ }
+ break;
+ case OP_TXINDEXLE:
+ if (sc->msk_if[MSK_PORT_A] != NULL) {
+ msk_txeof (sc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL);
+ }
+ if (sc->msk_if[MSK_PORT_B] != NULL) {
+ msk_txeof (sc->msk_if[MSK_PORT_B],
+ ((status & STLE_TXA2_MSKL) >>
+ STLE_TXA2_SHIFTL) |
+ ((len & STLE_TXA2_MSKH) <<
+ STLE_TXA2_SHIFTH));
+ }
+ break;
+ default:
+ DEBUG ((DEBUG_NET, "Marvell Yukon: unhandled opcode 0x%08x\n", control & STLE_OP_MASK));
+ break;
+ }
+ MSK_INC (cons, MSK_STAT_RING_CNT);
+ if (rxprog > sc->msk_process_limit) {
+ break;
+ }
+ }
+
+ sc->msk_stat_cons = cons;
+
+ if (rxput[MSK_PORT_A] > 0) {
+ msk_rxput (sc->msk_if[MSK_PORT_A]);
+ }
+ if (rxput[MSK_PORT_B] > 0) {
+ msk_rxput (sc->msk_if[MSK_PORT_B]);
+ }
+
+ return (sc->msk_stat_cons != CSR_READ_2 (sc, STAT_PUT_IDX));
+}
+
+STATIC
+VOID
+msk_intr (
+ struct msk_softc *sc
+ )
+{
+ struct msk_if_softc *sc_if0;
+ struct msk_if_softc *sc_if1;
+ UINT32 Status;
+ INTN domore;
+
+ // Reading B0_Y2_SP_ISRC2 masks further interrupts
+ Status = CSR_READ_4 (sc, B0_Y2_SP_ISRC2);
+ if (Status == 0 || Status == 0xffffffff ||
+ (sc->msk_pflags & MSK_FLAG_SUSPEND) != 0 ||
+ (Status & sc->msk_intrmask) == 0)
+ {
+ // Leave ISR - Reenable interrupts
+ CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2);
+ return;
+ }
+
+ sc_if0 = sc->msk_if[MSK_PORT_A];
+ sc_if1 = sc->msk_if[MSK_PORT_B];
+
+ if ((Status & Y2_IS_IRQ_PHY1) != 0 && sc_if0 != NULL) {
+ msk_intr_phy (sc_if0);
+ }
+ if ((Status & Y2_IS_IRQ_PHY2) != 0 && sc_if1 != NULL) {
+ msk_intr_phy (sc_if1);
+ }
+ if ((Status & Y2_IS_IRQ_MAC1) != 0 && sc_if0 != NULL) {
+ msk_intr_gmac (sc_if0);
+ }
+ if ((Status & Y2_IS_IRQ_MAC2) != 0 && sc_if1 != NULL) {
+ msk_intr_gmac (sc_if1);
+ }
+ if ((Status & (Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2)) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Rx descriptor error\n"));
+ sc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
+ }
+ if ((Status & (Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2)) != 0) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Tx descriptor error\n"));
+ sc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
+ }
+ if ((Status & Y2_IS_HW_ERR) != 0) {
+ msk_intr_hwerr (sc);
+ }
+
+ domore = msk_handle_events (sc);
+ if ((Status & Y2_IS_STAT_BMU) != 0 && domore == 0) {
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_CLR_IRQ);
+ }
+
+ // Leave ISR - Reenable interrupts
+ CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2);
+}
+
+static
+VOID
+msk_set_tx_stfwd (
+ struct msk_if_softc *sc_if
+ )
+{
+ // Disable jumbo frames for Tx
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA);
+}
+
+EFI_STATUS
+mskc_init (
+ struct msk_if_softc *sc_if
+ )
+{
+ EFI_STATUS Status;
+
+ Status = msk_init (sc_if);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return Status;
+}
+
+static
+EFI_STATUS
+msk_init (
+ IN struct msk_if_softc *sc_if
+ )
+{
+ UINT8 *eaddr;
+ UINT16 gmac;
+ UINT32 reg;
+ EFI_STATUS Status;
+ INTN port;
+ IN struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ // Cancel pending I/O and free all Rx/Tx buffers.
+ mskc_stop_if (sc_if);
+
+ sc_if->msk_framesize = MAX_SUPPORTED_PACKET_SIZE;
+
+ // GMAC Control reset.
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
+ }
+
+ //
+ // Initialize GMAC first such that speed/duplex/flow-control
+ // parameters are renegotiated when interface is brought up.
+ //
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, 0);
+
+ // Dummy read the Interrupt Source Register
+ CSR_READ_1 (sc, MR_ADDR (port, GMAC_IRQ_SRC));
+
+ // Clear MIB stats
+ msk_stats_clear (sc_if);
+
+ // Disable FCS
+ GMAC_WRITE_2 (sc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS);
+
+ // Setup Transmit Control Register
+ GMAC_WRITE_2 (sc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF));
+
+ // Setup Transmit Flow Control Register
+ GMAC_WRITE_2 (sc, port, GM_TX_FLOW_CTRL, 0xffff);
+
+ // Setup Transmit Parameter Register
+ GMAC_WRITE_2 (sc, port, GM_TX_PARAM,
+ TX_JAM_LEN_VAL (TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL (TX_JAM_IPG_DEF) |
+ TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
+
+ gmac = DATA_BLIND_VAL (DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL (IPG_DATA_DEF);
+
+ GMAC_WRITE_2 (sc, port, GM_SERIAL_MODE, gmac);
+
+ // Set station address
+ eaddr = sc_if->MacAddress.Addr;
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8));
+
+ // Disable interrupts for counter overflows
+ GMAC_WRITE_2 (sc, port, GM_TX_IRQ_MSK, 0);
+ GMAC_WRITE_2 (sc, port, GM_RX_IRQ_MSK, 0);
+ GMAC_WRITE_2 (sc, port, GM_TR_IRQ_MSK, 0);
+
+ // Configure Rx MAC FIFO
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P || sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ reg |= GMF_RX_OVER_ON;
+ }
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), reg);
+
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL) {
+ // Clear flush mask - HW bug
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), 0);
+ } else {
+ // Flush Rx MAC FIFO on any flow control or error
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ }
+
+ //
+ // Set Rx FIFO flush threshold to 64 bytes + 1 FIFO word
+ // due to hardware hang on receipt of pause frames.
+ //
+ reg = RX_GMF_FL_THR_DEF + 1;
+ // Another magic for Yukon FE+ - From Linux
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ reg = 0x178;
+ }
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_FL_THR), reg);
+
+ // Configure Tx MAC FIFO
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON);
+
+ // Configure hardware VLAN tag insertion/stripping
+ msk_setvlan (sc_if);
+
+ if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) {
+ // Set Rx Pause threshould.
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP);
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP);
+ // Configure store-and-forward for Tx.
+ msk_set_tx_stfwd (sc_if);
+ }
+
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ // Disable dynamic watermark - from Linux
+ reg = CSR_READ_4 (sc, MR_ADDR (port, TX_GMF_EA));
+ reg &= ~0x03;
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_EA), reg);
+ }
+
+ //
+ // Disable Force Sync bit and Alloc bit in Tx RAM interface
+ // arbiter as we don't use Sync Tx queue.
+ //
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+ // Enable the RAM Interface Arbiter
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB);
+
+ // Setup RAM buffer
+ msk_set_rambuffer (sc_if);
+
+ // Disable Tx sync Queue
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET);
+
+ // Setup Tx Queue Bus Memory Interface
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON);
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM);
+ switch (sc->msk_hw_id) {
+ case CHIP_ID_YUKON_EC_U:
+ if (sc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) {
+ // Fix for Yukon-EC Ultra: set BMU FIFO level
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV);
+ }
+ break;
+ case CHIP_ID_YUKON_EX:
+ //
+ // Yukon Extreme seems to have silicon bug for
+ // automatic Tx checksum calculation capability.
+ //
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF);
+ }
+ break;
+ }
+
+ // Setup Rx Queue Bus Memory Interface
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON);
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EC_U && sc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) {
+ // MAC Rx RAM Read is controlled by hardware
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS);
+ }
+
+ // truncate too-large frames - from linux
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+ msk_set_prefetch (sc_if, sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1);
+ msk_init_tx_ring (sc_if);
+
+ // Disable Rx checksum offload and RSS hash
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
+ msk_set_prefetch (sc_if, sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1);
+ Status = msk_init_rx_ring (sc_if);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "Marvell Yukon: Initialization failed: no memory for Rx buffers\n"));
+ mskc_stop_if (sc_if);
+ return Status;
+ }
+
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ // Disable flushing of non-ASF packets
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF);
+ }
+
+ // Configure interrupt handling
+ if (port == MSK_PORT_A) {
+ sc->msk_intrmask |= Y2_IS_PORT_A;
+ sc->msk_intrhwemask |= Y2_HWE_L1_MASK;
+ } else {
+ sc->msk_intrmask |= Y2_IS_PORT_B;
+ sc->msk_intrhwemask |= Y2_HWE_L2_MASK;
+ }
+ // Configure IRQ moderation mask.
+ CSR_WRITE_4 (sc, B2_IRQM_MSK, sc->msk_intrmask);
+ if (sc->msk_int_holdoff > 0) {
+ // Configure initial IRQ moderation timer value.
+ CSR_WRITE_4 (sc, B2_IRQM_INI, MSK_USECS (sc, sc->msk_int_holdoff));
+ CSR_WRITE_4 (sc, B2_IRQM_VAL, MSK_USECS (sc, sc->msk_int_holdoff));
+ // Start IRQ moderation.
+ CSR_WRITE_1 (sc, B2_IRQM_CTRL, TIM_START);
+ }
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
+
+ sc_if->msk_flags &= ~MSK_FLAG_LINK;
+ e1000phy_mediachg (sc_if->phy_softc);
+
+ return Status;
+}
+
+STATIC
+VOID
+msk_set_rambuffer (
+ struct msk_if_softc *sc_if
+ )
+{
+ INTN ltpp, utpp;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0)
+ return;
+
+ // Setup Rx Queue
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_START), sc->msk_rxqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_END), sc->msk_rxqend[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_WP), sc->msk_rxqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RP), sc->msk_rxqstart[port] / 8);
+
+ utpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_ULPP) / 8;
+ ltpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8;
+ if (sc->msk_rxqsize < MSK_MIN_RXQ_SIZE) {
+ ltpp += (MSK_RB_LLPP_B - MSK_RB_LLPP_S) / 8;
+ }
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp);
+ // Set Rx priority (RB_RX_UTHP/RB_RX_LTHP) thresholds?
+
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD);
+ CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL));
+
+ // Setup Tx Queue.
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_START), sc->msk_txqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_END), sc->msk_txqend[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_WP), sc->msk_txqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_RP), sc->msk_txqstart[port] / 8);
+
+ // Enable Store & Forward for Tx side
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD);
+ CSR_READ_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL));
+}
+
+STATIC
+VOID
+msk_set_prefetch (
+ struct msk_if_softc *sc_if,
+ INTN qaddr,
+ EFI_PHYSICAL_ADDRESS addr,
+ UINT32 count
+ )
+{
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+
+ // Reset the prefetch unit
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR);
+ // Set LE base address
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr));
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr));
+
+ // Set the list last index
+ CSR_WRITE_2 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count);
+ // Turn on prefetch unit
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON);
+ // Dummy read to ensure write
+ CSR_READ_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG));
+}
+
+VOID
+mskc_stop_if (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_txdesc *txd;
+ struct msk_rxdesc *rxd;
+ UINT32 val;
+ INTN i;
+ INTN port;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ PciIo = sc->PciIo;
+ port = sc_if->msk_md.port;
+
+ // Disable interrupts
+ if (port == MSK_PORT_A) {
+ sc->msk_intrmask &= ~Y2_IS_PORT_A;
+ sc->msk_intrhwemask &= ~Y2_HWE_L1_MASK;
+ } else {
+ sc->msk_intrmask &= ~Y2_IS_PORT_B;
+ sc->msk_intrhwemask &= ~Y2_HWE_L2_MASK;
+ }
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
+
+ // Disable Tx/Rx MAC.
+ val = GMAC_READ_2 (sc, port, GM_GP_CTRL);
+ val &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, val);
+ // Read again to ensure writing.
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
+ // Update stats and clear counters
+ msk_stats_update (sc_if);
+
+ // Stop Tx BMU
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
+ val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR));
+ for (i = 0; i < MSK_TIMEOUT; i++) {
+ if ((val & (BMU_STOP | BMU_IDLE)) == 0) {
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
+ val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR));
+ } else {
+ break;
+ }
+ gBS->Stall (1);
+ }
+ if (i == MSK_TIMEOUT) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Tx BMU stop failed\n"));
+ }
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD);
+
+ // Disable all GMAC interrupt.
+ CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), 0);
+ // Disable PHY interrupt. */
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0);
+
+ // Disable the RAM Interface Arbiter.
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB);
+
+ // Reset the PCI FIFO of the async Tx queue
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+
+ // Reset the Tx prefetch units
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+
+ // Reset the RAM Buffer async Tx queue
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET);
+
+ // Reset Tx MAC FIFO.
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
+ // Set Pause Off.
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF);
+
+ /*
+ * The Rx Stop command will not work for Yukon-2 if the BMU does not
+ * reach the end of packet and since we can't make sure that we have
+ * incoming data, we must reset the BMU while it is not during a DMA
+ * transfer. Since it is possible that the Rx path is still active,
+ * the Rx RAM buffer will be stopped first, so any possible incoming
+ * data will not trigger a DMA. After the RAM buffer is stopped, the
+ * BMU is polled until any DMA in progress is ended and only then it
+ * will be reset.
+ */
+
+ // Disable the RAM Buffer receive queue
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD);
+ for (i = 0; i < MSK_TIMEOUT; i++) {
+ if (CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RL))) {
+ break;
+ }
+ gBS->Stall (1);
+ }
+ if (i == MSK_TIMEOUT) {
+ DEBUG ((DEBUG_NET, "Marvell Yukon: Rx BMU stop failed\n"));
+ }
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+ // Reset the Rx prefetch unit.
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+ // Reset the RAM Buffer receive queue.
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET);
+ // Reset Rx MAC FIFO.
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+ // Free Rx and Tx mbufs still in the queues
+ for (i = 0; i < MSK_RX_RING_CNT; i++) {
+ rxd = &sc_if->msk_cdata.msk_rxdesc[i];
+ if (rxd->rx_m.Buf != NULL) {
+ PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
+ if(rxd->rx_m.Buf != NULL) {
+ gBS->FreePool (rxd->rx_m.Buf);
+ rxd->rx_m.Buf = NULL;
+ }
+ gBS->SetMem (&(rxd->rx_m), sizeof (MSK_DMA_BUF), 0);
+ }
+ }
+
+ for (i = 0; i < MSK_TX_RING_CNT; i++) {
+ txd = &sc_if->msk_cdata.msk_txdesc[i];
+ if (txd->tx_m.Buf != NULL) {
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
+ gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
+ // We don't own the transmit buffers so don't free them
+ }
+ }
+
+ /*
+ * Mark the interface down.
+ */
+ sc_if->msk_flags &= ~MSK_FLAG_LINK;
+}
+
+/*
+ * When GM_PAR_MIB_CLR bit of GM_PHY_ADDR is set, reading lower
+ * counter clears high 16 bits of the counter such that accessing
+ * lower 16 bits should be the last operation.
+ */
+#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (sc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (sc, x, y)
+#define MSK_READ_MIB64(x, y) (((UINT64)MSK_READ_MIB32 (x, (y) + 8)) << 32) + (UINT64)MSK_READ_MIB32 (x, y)
+
+static
+VOID
+msk_stats_clear (
+ struct msk_if_softc *sc_if
+ )
+{
+ UINT16 gmac;
+ INTN val;
+ INTN i;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ // Set MIB Clear Counter Mode.
+ gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
+ // Read all MIB Counters with Clear Mode set
+ for (i = GM_RXF_UC_OK; i <= GM_TXE_FIFO_UR; i += sizeof (UINT32)) {
+ val = MSK_READ_MIB32 (port, i);
+ if (val); //Workaround: to prevent the GCC error: 'value computed is not used'
+ }
+ // Clear MIB Clear Counter Mode
+ gmac &= ~GM_PAR_MIB_CLR;
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac);
+}
+
+static
+VOID
+msk_stats_update (
+ struct msk_if_softc *sc_if
+ )
+{
+ struct msk_hw_stats *stats;
+ UINT16 gmac;
+ INTN val;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+ stats = &sc_if->msk_stats;
+ /* Set MIB Clear Counter Mode. */
+ gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
+
+ /* Rx stats. */
+ stats->rx_ucast_frames += MSK_READ_MIB32 (port, GM_RXF_UC_OK);
+ stats->rx_bcast_frames += MSK_READ_MIB32 (port, GM_RXF_BC_OK);
+ stats->rx_pause_frames += MSK_READ_MIB32 (port, GM_RXF_MPAUSE);
+ stats->rx_mcast_frames += MSK_READ_MIB32 (port, GM_RXF_MC_OK);
+ stats->rx_crc_errs += MSK_READ_MIB32 (port, GM_RXF_FCS_ERR);
+ val = MSK_READ_MIB32 (port, GM_RXF_SPARE1);
+ stats->rx_good_octets += MSK_READ_MIB64 (port, GM_RXO_OK_LO);
+ stats->rx_bad_octets += MSK_READ_MIB64 (port, GM_RXO_ERR_LO);
+ stats->rx_runts += MSK_READ_MIB32 (port, GM_RXF_SHT);
+ stats->rx_runt_errs += MSK_READ_MIB32 (port, GM_RXE_FRAG);
+ stats->rx_pkts_64 += MSK_READ_MIB32 (port, GM_RXF_64B);
+ stats->rx_pkts_65_127 += MSK_READ_MIB32 (port, GM_RXF_127B);
+ stats->rx_pkts_128_255 += MSK_READ_MIB32 (port, GM_RXF_255B);
+ stats->rx_pkts_256_511 += MSK_READ_MIB32 (port, GM_RXF_511B);
+ stats->rx_pkts_512_1023 += MSK_READ_MIB32 (port, GM_RXF_1023B);
+ stats->rx_pkts_1024_1518 += MSK_READ_MIB32 (port, GM_RXF_1518B);
+ stats->rx_pkts_1519_max += MSK_READ_MIB32 (port, GM_RXF_MAX_SZ);
+ stats->rx_pkts_too_long += MSK_READ_MIB32 (port, GM_RXF_LNG_ERR);
+ stats->rx_pkts_jabbers += MSK_READ_MIB32 (port, GM_RXF_JAB_PKT);
+ val = MSK_READ_MIB32 (port, GM_RXF_SPARE2);
+ stats->rx_fifo_oflows += MSK_READ_MIB32 (port, GM_RXE_FIFO_OV);
+ val = MSK_READ_MIB32 (port, GM_RXF_SPARE3);
+
+ /* Tx stats. */
+ stats->tx_ucast_frames += MSK_READ_MIB32 (port, GM_TXF_UC_OK);
+ stats->tx_bcast_frames += MSK_READ_MIB32 (port, GM_TXF_BC_OK);
+ stats->tx_pause_frames += MSK_READ_MIB32 (port, GM_TXF_MPAUSE);
+ stats->tx_mcast_frames += MSK_READ_MIB32 (port, GM_TXF_MC_OK);
+ stats->tx_octets += MSK_READ_MIB64 (port, GM_TXO_OK_LO);
+ stats->tx_pkts_64 += MSK_READ_MIB32 (port, GM_TXF_64B);
+ stats->tx_pkts_65_127 += MSK_READ_MIB32 (port, GM_TXF_127B);
+ stats->tx_pkts_128_255 += MSK_READ_MIB32 (port, GM_TXF_255B);
+ stats->tx_pkts_256_511 += MSK_READ_MIB32 (port, GM_TXF_511B);
+ stats->tx_pkts_512_1023 += MSK_READ_MIB32 (port, GM_TXF_1023B);
+ stats->tx_pkts_1024_1518 += MSK_READ_MIB32 (port, GM_TXF_1518B);
+ stats->tx_pkts_1519_max += MSK_READ_MIB32 (port, GM_TXF_MAX_SZ);
+ val = MSK_READ_MIB32 (port, GM_TXF_SPARE1);
+ stats->tx_colls += MSK_READ_MIB32 (port, GM_TXF_COL);
+ stats->tx_late_colls += MSK_READ_MIB32 (port, GM_TXF_LAT_COL);
+ stats->tx_excess_colls += MSK_READ_MIB32 (port, GM_TXF_ABO_COL);
+ stats->tx_multi_colls += MSK_READ_MIB32 (port, GM_TXF_MUL_COL);
+ stats->tx_single_colls += MSK_READ_MIB32 (port, GM_TXF_SNG_COL);
+ stats->tx_underflows += MSK_READ_MIB32 (port, GM_TXE_FIFO_UR);
+
+ if (val); //Workaround: to prevent the GCC error: 'value computed is not used'
+
+ /* Clear MIB Clear Counter Mode. */
+ gmac &= ~GM_PAR_MIB_CLR;
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac);
+}
+
+#undef MSK_READ_MIB32
+#undef MSK_READ_MIB64
diff --git a/OptionRomPkg/MarvellYukonDxe/if_msk.h b/OptionRomPkg/MarvellYukonDxe/if_msk.h
new file mode 100644
index 0000000000..835d336a80
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/if_msk.h
@@ -0,0 +1,66 @@
+/** <at> file
+* API to ported msk driver
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef _IF_MSK_H_
+#define _IF_MSK_H_
+
+#include <Uefi.h>
+#include <Protocol/PciIo.h>
+#include "if_mskreg.h"
+#include "miivar.h"
+
+#define MAX_SUPPORTED_PACKET_SIZE (1566) /* No jumbo frame size support */
+
+EFI_STATUS mskc_probe (EFI_PCI_IO_PROTOCOL *PciIo);
+
+EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *, struct msk_softc **);
+EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN);
+VOID mskc_detach (struct msk_softc *);
+VOID mskc_detach_if (struct msk_if_softc *);
+
+EFI_STATUS mskc_init (struct msk_if_softc *);
+VOID mskc_shutdown (struct msk_softc *);
+VOID mskc_stop_if (struct msk_if_softc *);
+
+void
+mskc_rxfilter (
+ IN struct msk_if_softc *sc_if,
+ IN UINT32 FilterFlags,
+ IN UINTN MCastFilterCnt,
+ IN EFI_MAC_ADDRESS *MCastFilter
+ );
+
+EFI_STATUS
+mskc_transmit (
+ IN struct msk_if_softc *sc_if,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ );
+
+EFI_STATUS
+mskc_receive (
+ IN struct msk_if_softc *sc_if,
+ IN OUT UINTN *BufferSize,
+ OUT VOID *Buffer
+ );
+
+void
+mskc_getstatus (
+ IN struct msk_if_softc *sc,
+ OUT UINT32 *InterruptStatus, OPTIONAL
+ OUT VOID **TxBuf OPTIONAL
+ );
+
+#endif /* _IF_MSK_H_ */
diff --git a/OptionRomPkg/MarvellYukonDxe/if_mskreg.h b/OptionRomPkg/MarvellYukonDxe/if_mskreg.h
new file mode 100644
index 0000000000..0e18598f75
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/if_mskreg.h
@@ -0,0 +1,2516 @@
+/** <at> file
+* Defines and macros for the PCIe Marvell Yukon gigabit ethernet adapter product family
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+/******************************************************************************
+ *
+ * LICENSE:
+ * Copyright (C) Marvell International Ltd. and/or its affiliates
+ *
+ * The computer program files contained in this folder ("Files")
+ * are provided to you under the BSD-type license terms provided
+ * below, and any use of such Files and any derivative works
+ * thereof created by you shall be governed by the following terms
+ * and conditions:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * - Neither the name of Marvell nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * /LICENSE
+ *
+ ******************************************************************************/
+
+/*-
+ * Copyright (c) 1997, 1998, 1999, 2000
+ * Bill Paul <wpaul <at> ctr.columbia.edu>. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*-
+ * Copyright (c) 2003 Nathan L. Binkert <binkertn <at> umich.edu>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*$FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.27.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $*/
+
+#ifndef _IF_MSKREG_H_
+#define _IF_MSKREG_H_
+
+#include "miivar.h"
+
+/*
+ * SysKonnect PCI vendor ID
+ */
+#define VENDORID_SK 0x1148
+
+/*
+ * Marvell PCI vendor ID
+ */
+#define VENDORID_MARVELL 0x11AB
+
+/*
+ * D-Link PCI vendor ID
+ */
+#define VENDORID_DLINK 0x1186
+
+/*
+ * SysKonnect ethernet device IDs
+ */
+#define DEVICEID_SK_YUKON2 0x9000
+#define DEVICEID_SK_YUKON2_EXPR 0x9e00
+
+/*
+ * Marvell gigabit ethernet device IDs
+ */
+#define DEVICEID_MRVL_8021CU 0x4340
+#define DEVICEID_MRVL_8022CU 0x4341
+#define DEVICEID_MRVL_8061CU 0x4342
+#define DEVICEID_MRVL_8062CU 0x4343
+#define DEVICEID_MRVL_8021X 0x4344
+#define DEVICEID_MRVL_8022X 0x4345
+#define DEVICEID_MRVL_8061X 0x4346
+#define DEVICEID_MRVL_8062X 0x4347
+#define DEVICEID_MRVL_8035 0x4350
+#define DEVICEID_MRVL_8036 0x4351
+#define DEVICEID_MRVL_8038 0x4352
+#define DEVICEID_MRVL_8039 0x4353
+#define DEVICEID_MRVL_8040 0x4354
+#define DEVICEID_MRVL_8040T 0x4355
+#define DEVICEID_MRVL_8042 0x4357
+#define DEVICEID_MRVL_8048 0x435A
+#define DEVICEID_MRVL_4360 0x4360
+#define DEVICEID_MRVL_4361 0x4361
+#define DEVICEID_MRVL_4362 0x4362
+#define DEVICEID_MRVL_4363 0x4363
+#define DEVICEID_MRVL_4364 0x4364
+#define DEVICEID_MRVL_4365 0x4365
+#define DEVICEID_MRVL_436A 0x436A
+#define DEVICEID_MRVL_436B 0x436B
+#define DEVICEID_MRVL_436C 0x436C
+#define DEVICEID_MRVL_4380 0x4380
+#define DEVICEID_MRVL_4381 0x4381
+
+/*
+ * D-Link gigabit ethernet device ID
+ */
+#define DEVICEID_DLINK_DGE550SX 0x4001
+#define DEVICEID_DLINK_DGE560SX 0x4002
+#define DEVICEID_DLINK_DGE560T 0x4b00
+
+#define BIT_31 ((UINT32)1 << 31)
+#define BIT_30 (1 << 30)
+#define BIT_29 (1 << 29)
+#define BIT_28 (1 << 28)
+#define BIT_27 (1 << 27)
+#define BIT_26 (1 << 26)
+#define BIT_25 (1 << 25)
+#define BIT_24 (1 << 24)
+#define BIT_23 (1 << 23)
+#define BIT_22 (1 << 22)
+#define BIT_21 (1 << 21)
+#define BIT_20 (1 << 20)
+#define BIT_19 (1 << 19)
+#define BIT_18 (1 << 18)
+#define BIT_17 (1 << 17)
+#define BIT_16 (1 << 16)
+#define BIT_15 (1 << 15)
+#define BIT_14 (1 << 14)
+#define BIT_13 (1 << 13)
+#define BIT_12 (1 << 12)
+#define BIT_11 (1 << 11)
+#define BIT_10 (1 << 10)
+#define BIT_9 (1 << 9)
+#define BIT_8 (1 << 8)
+#define BIT_7 (1 << 7)
+#define BIT_6 (1 << 6)
+#define BIT_5 (1 << 5)
+#define BIT_4 (1 << 4)
+#define BIT_3 (1 << 3)
+#define BIT_2 (1 << 2)
+#define BIT_1 (1 << 1)
+#define BIT_0 (1 << 0)
+
+#define SHIFT31(x) ((x) << 31)
+#define SHIFT30(x) ((x) << 30)
+#define SHIFT29(x) ((x) << 29)
+#define SHIFT28(x) ((x) << 28)
+#define SHIFT27(x) ((x) << 27)
+#define SHIFT26(x) ((x) << 26)
+#define SHIFT25(x) ((x) << 25)
+#define SHIFT24(x) ((x) << 24)
+#define SHIFT23(x) ((x) << 23)
+#define SHIFT22(x) ((x) << 22)
+#define SHIFT21(x) ((x) << 21)
+#define SHIFT20(x) ((x) << 20)
+#define SHIFT19(x) ((x) << 19)
+#define SHIFT18(x) ((x) << 18)
+#define SHIFT17(x) ((x) << 17)
+#define SHIFT16(x) ((x) << 16)
+#define SHIFT15(x) ((x) << 15)
+#define SHIFT14(x) ((x) << 14)
+#define SHIFT13(x) ((x) << 13)
+#define SHIFT12(x) ((x) << 12)
+#define SHIFT11(x) ((x) << 11)
+#define SHIFT10(x) ((x) << 10)
+#define SHIFT9(x) ((x) << 9)
+#define SHIFT8(x) ((x) << 8)
+#define SHIFT7(x) ((x) << 7)
+#define SHIFT6(x) ((x) << 6)
+#define SHIFT5(x) ((x) << 5)
+#define SHIFT4(x) ((x) << 4)
+#define SHIFT3(x) ((x) << 3)
+#define SHIFT2(x) ((x) << 2)
+#define SHIFT1(x) ((x) << 1)
+#define SHIFT0(x) ((x) << 0)
+
+/*
+ * PCI Configuration Space header
+ */
+#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
+#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
+#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
+#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
+#define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */
+#define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 */
+#define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 */
+#define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 */
+#define PCI_CFG_REG_0 0x90 /* 32 bit Config Register 0 */
+#define PCI_CFG_REG_1 0x94 /* 32 bit Config Register 1 */
+
+/* PCI Express Capability */
+#define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */
+#define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */
+#define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */
+#define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */
+#define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */
+#define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */
+#define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */
+#define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */
+#define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */
+
+/* PCI Express Extended Capabilities */
+#define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */
+#define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */
+#define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */
+#define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */
+#define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */
+#define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */
+#define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */
+#define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */
+
+/* PCI_OUR_REG_1 32 bit Our Register 1 */
+#define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */
+#define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */
+#define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */
+#define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */
+#define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */
+#define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */
+#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */
+#define PCI_EN_IO BIT_23 /* Mapping to I/O space */
+#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */
+/* 1 = Map Flash to memory */
+/* 0 = Disable addr. dec */
+#define PCI_PAGESIZE (3L<<20)/* Bit 21..20: FLASH Page Size */
+#define PCI_PAGE_16 (0L<<20)/* 16 k pages */
+#define PCI_PAGE_32K (1L<<20)/* 32 k pages */
+#define PCI_PAGE_64K (2L<<20)/* 64 k pages */
+#define PCI_PAGE_128K (3L<<20)/* 128 k pages */
+#define PCI_PAGEREG (7L<<16)/* Bit 18..16: Page Register */
+#define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */
+#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */
+#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */
+#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */
+#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */
+#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */
+#define PCI_BURST_DIS BIT_9 /* Burst Disable */
+#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */
+#define PCI_SKEW_DAS (0xfL<<4)/* Bit 7.. 4: Skew Ctrl, DAS Ext */
+#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */
+#define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */
+
+/* PCI_OUR_REG_2 32 bit Our Register 2 */
+#define PCI_VPD_WR_THR (0xff<<24) /* Bit 31..24: VPD Write Threshold */
+#define PCI_DEV_SEL (0x7f<<17) /* Bit 23..17: EEPROM Device Select */
+#define PCI_VPD_ROM_SZ (0x07<<14) /* Bit 16..14: VPD ROM Size */
+/* Bit 13..12: reserved */
+#define PCI_PATCH_DIR (0x0f<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */
+#define PCI_PATCH_DIR_3 BIT_11
+#define PCI_PATCH_DIR_2 BIT_10
+#define PCI_PATCH_DIR_1 BIT_9
+#define PCI_PATCH_DIR_0 BIT_8
+#define PCI_EXT_PATCHS (0x0f<<4) /* Bit 7.. 4: Extended Patches 3..0 */
+#define PCI_EXT_PATCH_3 BIT_7
+#define PCI_EXT_PATCH_2 BIT_6
+#define PCI_EXT_PATCH_1 BIT_5
+#define PCI_EXT_PATCH_0 BIT_4
+#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */
+#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */
+#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */
+
+/* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */
+#define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */
+#define PCI_OS_PCIX BIT_30 /* PCI-X Bus */
+#define PCI_OS_MODE_MSK (3<<28) /* Bit 29..28: PCI-X Bus Mode Mask */
+#define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */
+#define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */
+#define PCI_OS_DLLE_MSK (3<<24) /* Bit 25..24: DLL Status Indication */
+#define PCI_OS_DLLR_MSK (0x0f<<20) /* Bit 23..20: DLL Row Counters Values */
+#define PCI_OS_DLLC_MSK (0x0f<<16) /* Bit 19..16: DLL Col. Counters Values */
+
+#define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */
+/* possible values for the speed field of the register */
+#define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */
+#define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */
+#define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */
+#define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */
+
+/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
+#define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */
+#define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */
+#define PCI_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */
+#define PCI_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */
+#define PCI_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */
+#define PCI_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */
+#define PCI_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */
+#define PCI_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */
+#define PCI_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */
+#define PCI_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */
+
+/* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */
+/* Bit 31..27: for A3 & later */
+#define PCI_CTL_DIV_CORE_CLK_ENA BIT_31 /* Divide Core Clock Enable */
+#define PCI_CTL_SRESET_VMAIN_AV BIT_30 /* Soft Reset for Vmain_av De-Glitch */
+#define PCI_CTL_BYPASS_VMAIN_AV BIT_29 /* Bypass En. for Vmain_av De-Glitch */
+#define PCI_CTL_TIM_VMAIN_AV1 BIT_28 /* Bit 28..27: Timer Vmain_av Mask */
+#define PCI_CTL_TIM_VMAIN_AV0 BIT_27 /* Bit 28..27: Timer Vmain_av Mask */
+#define PCI_CTL_TIM_VMAIN_AV_MSK (BIT_28 | BIT_27)
+/* Bit 26..16: Release Clock on Event */
+#define PCI_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */
+#define PCI_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */
+#define PCI_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */
+#define PCI_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */
+#define PCI_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */
+#define PCI_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */
+#define PCI_REL_PME_ASSERTED BIT_20 /* PME Asserted */
+#define PCI_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */
+#define PCI_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */
+#define PCI_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */
+#define PCI_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */
+/* Bit 10.. 0: Mask for Gate Clock */
+#define PCI_GAT_PCIE_RST_ASSERTED BIT_10 /* PCIe Reset Asserted */
+#define PCI_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */
+#define PCI_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */
+#define PCI_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */
+#define PCI_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */
+#define PCI_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */
+#define PCI_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */
+#define PCI_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */
+#define PCI_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */
+#define PCI_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */
+#define PCI_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */
+
+/* PCI_CFG_REG_1 32 bit Config Register 1 */
+#define PCI_CF1_DIS_REL_EVT_RST BIT_24 /* Dis. Rel. Event during PCIE reset */
+/* Bit 23..21: Release Clock on Event */
+#define PCI_CF1_REL_LDR_NOT_FIN BIT_23 /* EEPROM Loader Not Finished */
+#define PCI_CF1_REL_VMAIN_AVLBL BIT_22 /* Vmain available */
+#define PCI_CF1_REL_PCIE_RESET BIT_21 /* PCI-E reset */
+/* Bit 20..18: Gate Clock on Event */
+#define PCI_CF1_GAT_LDR_NOT_FIN BIT_20 /* EEPROM Loader Finished */
+#define PCI_CF1_GAT_PCIE_RX_IDLE BIT_19 /* PCI-E Rx Electrical idle */
+#define PCI_CF1_GAT_PCIE_RESET BIT_18 /* PCI-E Reset */
+#define PCI_CF1_PRST_PHY_CLKREQ BIT_17 /* Enable PCI-E rst & PM2PHY gen. CLKREQ */
+#define PCI_CF1_PCIE_RST_CLKREQ BIT_16 /* Enable PCI-E rst generate CLKREQ */
+
+#define PCI_CF1_ENA_CFG_LDR_DONE BIT_8 /* Enable core level Config loader done */
+#define PCI_CF1_ENA_TXBMU_RD_IDLE BIT_1 /* Enable TX BMU Read IDLE for ASPM */
+#define PCI_CF1_ENA_TXBMU_WR_IDLE BIT_0 /* Enable TX BMU Write IDLE for ASPM */
+
+/* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */
+#define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */
+#define PEX_DC_EN_NO_SNOOP BIT_11 /* Enable No Snoop */
+#define PEX_DC_EN_AUX_POW BIT_10 /* Enable AUX Power */
+#define PEX_DC_EN_PHANTOM BIT_9 /* Enable Phantom Functions */
+#define PEX_DC_EN_EXT_TAG BIT_8 /* Enable Extended Tag Field */
+#define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */
+#define PEX_DC_EN_REL_ORD BIT_4 /* Enable Relaxed Ordering */
+#define PEX_DC_EN_UNS_RQ_RP BIT_3 /* Enable Unsupported Request Reporting */
+#define PEX_DC_EN_FAT_ER_RP BIT_2 /* Enable Fatal Error Reporting */
+#define PEX_DC_EN_NFA_ER_RP BIT_1 /* Enable Non-Fatal Error Reporting */
+#define PEX_DC_EN_COR_ER_RP BIT_0 /* Enable Correctable Error Reporting */
+
+#define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK)
+
+/* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */
+#define PEX_LS_SLOT_CLK_CFG BIT_12 /* Slot Clock Config */
+#define PEX_LS_LINK_TRAIN BIT_11 /* Link Training */
+#define PEX_LS_TRAIN_ERROR BIT_10 /* Training Error */
+#define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */
+#define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */
+
+/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */
+#define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */
+#define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */
+#define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */
+#define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */
+#define PEX_COMP_TO BIT_14 /* Completion Timeout */
+#define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */
+#define PEX_POIS_TLP BIT_12 /* Poisoned TLP */
+#define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */
+
+#define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P)
+
+/* Control Register File (Address Map) */
+
+/*
+ * Bank 0
+ */
+#define B0_RAP 0x0000 /* 8 bit Register Address Port */
+#define B0_CTST 0x0004 /* 16 bit Control/Status register */
+#define B0_LED 0x0006 /* 8 Bit LED register */
+#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */
+#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
+#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
+#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
+#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
+#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */
+
+/* Special ISR registers (Yukon-2 only) */
+#define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */
+#define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */
+#define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Reg */
+#define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Reg */
+#define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Reg */
+
+/*
+ * Bank 1
+ * - completely empty (this is the RAP Block window)
+ * Note: if RAP = 1 this page is reserved
+ */
+
+/*
+ * Bank 2
+ */
+/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
+#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
+#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
+#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
+#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
+#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
+#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
+#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
+#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
+#define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */
+#define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */
+#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
+#define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */
+#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */
+#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */
+#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */
+#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
+#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
+#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
+#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
+#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
+#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
+#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
+#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
+#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
+#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */
+#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
+#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
+#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
+#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
+
+#define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */
+#define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */
+
+/*
+ * Bank 3
+ */
+/* RAM Random Registers */
+#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
+#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
+#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
+
+#define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */
+
+/* RAM Interface Registers */
+/* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */
+/*
+ * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
+ * not usable in SW. Please notice these are NOT real timeouts, these are
+ * the number of qWords transferred continuously.
+ */
+#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */
+#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */
+#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */
+#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */
+#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */
+#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */
+#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */
+#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */
+#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */
+#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */
+#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/
+#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/
+#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */
+#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */
+#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */
+
+/*
+ * Bank 4 - 5
+ */
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
+#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
+#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
+#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
+#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
+#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
+#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
+
+#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs))
+
+/* RSS key registers for Yukon-2 Family */
+#define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */
+/* RSS key register offsets */
+#define KEY_IDX_0 0 /* offset for location of KEY 0 */
+#define KEY_IDX_1 4 /* offset for location of KEY 1 */
+#define KEY_IDX_2 8 /* offset for location of KEY 2 */
+#define KEY_IDX_3 12 /* offset for location of KEY 3 */
+/* 0x0280 - 0x0292: MAC 2 */
+#define RSS_KEY_ADDR(Port, KeyIndex) ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex))
+
+/*
+ * Bank 8 - 15
+ */
+/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
+#define B8_Q_REGS 0x0400
+
+/* Queue Register Offsets, use Q_ADDR() to access */
+#define Q_D 0x00 /* 8*32 bit Current Descriptor */
+#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
+#define Q_DONE 0x24 /* 16 bit Done Index */
+#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
+#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
+#define Q_BC 0x30 /* 32 bit Current Byte Counter */
+#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
+#define Q_F 0x38 /* 32 bit Flag Register */
+#define Q_T1 0x3c /* 32 bit Test Register 1 */
+#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
+#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
+#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
+#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
+#define Q_WM 0x40 /* 16 bit FIFO Watermark */
+#define Q_AL 0x42 /* 8 bit FIFO Alignment */
+#define Q_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */
+#define Q_RSL 0x46 /* 8 bit FIFO Read Shadow Level */
+#define Q_RP 0x48 /* 8 bit FIFO Read Pointer */
+#define Q_RL 0x4a /* 8 bit FIFO Read Level */
+#define Q_WP 0x4c /* 8 bit FIFO Write Pointer */
+#define Q_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */
+#define Q_WL 0x4e /* 8 bit FIFO Write Level */
+#define Q_WSL 0x4f /* 8 bit FIFO Write Shadow Level */
+
+#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs))
+
+/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */
+#define Y2_B8_PREF_REGS 0x0450
+
+#define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */
+#define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */
+#define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */
+#define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/
+#define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */
+#define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */
+#define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */
+#define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */
+#define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */
+#define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */
+
+#define PREF_UNIT_MASK_IDX 0x0fff
+
+#define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs))
+
+/*
+ * Bank 16 - 23
+ */
+/* RAM Buffer Registers */
+#define B16_RAM_REGS 0x0800
+
+/* RAM Buffer Register Offsets, use RB_ADDR() to access */
+#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
+#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
+#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
+#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
+#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */
+#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */
+#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
+#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
+#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
+#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
+#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
+#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
+#define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */
+
+/*
+ * Bank 24
+ */
+/* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
+#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */
+#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */
+#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */
+#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
+#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
+#define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */
+#define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */
+#define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */
+#define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */
+#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
+#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
+#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
+#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
+
+/*
+ * Bank 25
+ */
+/* 0x0c80 - 0x0cbf: MAC 2 */
+/* 0x0cc0 - 0x0cff: reserved */
+
+/*
+ * Bank 26
+ */
+/* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
+#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */
+#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
+#define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */
+#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
+#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */
+#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
+#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
+#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
+#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
+
+/*
+ * Bank 27
+ */
+/* 0x0d80 - 0x0dbf: MAC 2 */
+/* 0x0daa - 0x0dff: reserved */
+
+/*
+ * Bank 28
+ */
+/* Descriptor Poll Timer Registers */
+#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */
+#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */
+#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */
+#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */
+/* Time Stamp Timer Registers (YUKON only) */
+#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */
+#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */
+#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */
+/* Polling Unit Registers (Yukon-2 only) */
+#define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */
+#define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */
+#define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */
+#define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */
+/* ASF Subsystem Registers (Yukon-2 only) */
+#define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */
+#define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */
+#define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */
+#define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */
+#define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */
+#define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */
+#define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */
+#define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */
+#define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */
+#define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */
+
+/*
+ * Bank 29
+ */
+
+/* Status BMU Registers (Yukon-2 only)*/
+#define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */
+#define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */
+#define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */
+#define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */
+#define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */
+#define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */
+#define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */
+#define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */
+#define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */
+#define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */
+/* FIFO Control/Status Registers (Yukon-2 only)*/
+#define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */
+#define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */
+#define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */
+#define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */
+#define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */
+#define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */
+#define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */
+/* Level and ISR Timer Registers (Yukon-2 only)*/
+#define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */
+#define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */
+#define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */
+#define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */
+#define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */
+#define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */
+#define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */
+#define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */
+#define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */
+#define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */
+#define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */
+#define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */
+
+#define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */
+#define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */
+#define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */
+#define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */
+
+/*
+ * Bank 30
+ */
+/* GMAC and GPHY Control Registers (YUKON only) */
+#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */
+#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */
+#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */
+#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */
+#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */
+
+/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
+
+#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */
+
+#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */
+#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */
+#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */
+#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */
+#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */
+#define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */
+#define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */
+#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */
+
+/* WOL Pattern Length Registers (YUKON only) */
+
+#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */
+#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */
+
+/* WOL Pattern Counter Registers (YUKON only) */
+
+#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */
+#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */
+
+/*
+ * Bank 32 - 33
+ */
+#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */
+#define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */
+
+/* offset to configuration space on Yukon-2 */
+#define Y2_CFG_SPC 0x1c00
+#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */
+#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */
+
+/*
+ * Control Register Bit Definitions:
+ */
+/* B0_CTST 24 bit Control/Status register */
+#define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */
+#define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */
+#define Y2_HW_WOL_ON BIT_15 /* HW WOL On (Yukon-EC Ultra A1 only) */
+#define Y2_HW_WOL_OFF BIT_14 /* HW WOL Off (Yukon-EC Ultra A1 only) */
+#define Y2_ASF_ENABLE BIT_13 /* ASF Unit Enable (YUKON-2 only) */
+#define Y2_ASF_DISABLE BIT_12 /* ASF Unit Disable (YUKON-2 only) */
+#define Y2_CLK_RUN_ENA BIT_11 /* CLK_RUN Enable (YUKON-2 only) */
+#define Y2_CLK_RUN_DIS BIT_10 /* CLK_RUN Disable (YUKON-2 only) */
+#define Y2_LED_STAT_ON BIT_9 /* Status LED On (YUKON-2 only) */
+#define Y2_LED_STAT_OFF BIT_8 /* Status LED Off (YUKON-2 only) */
+#define CS_ST_SW_IRQ BIT_7 /* Set IRQ SW Request */
+#define CS_CL_SW_IRQ BIT_6 /* Clear IRQ SW Request */
+#define CS_STOP_DONE BIT_5 /* Stop Master is finished */
+#define CS_STOP_MAST BIT_4 /* Command Bit to stop the master */
+#define CS_MRST_CLR BIT_3 /* Clear Master Reset */
+#define CS_MRST_SET BIT_2 /* Set Master Reset */
+#define CS_RST_CLR BIT_1 /* Clear Software Reset */
+#define CS_RST_SET BIT_0 /* Set Software Reset */
+#define Y_ULTRA_2_PLUG_IN_GO_EN BIT_15
+
+#define LED_STAT_ON BIT_1 /* Status LED On */
+#define LED_STAT_OFF BIT_0 /* Status LED Off */
+
+/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
+#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */
+#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */
+#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */
+#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */
+#define PC_VAUX_ON BIT_3 /* Switch VAUX On */
+#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */
+#define PC_VCC_ON BIT_1 /* Switch VCC On */
+#define PC_VCC_OFF BIT_0 /* Switch VCC Off */
+
+/* B0_ISRC 32 bit Interrupt Source Register */
+/* B0_IMSK 32 bit Interrupt Mask Register */
+/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
+/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
+/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */
+/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */
+/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */
+/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */
+#define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8))
+#define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */
+#define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */
+#define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */
+#define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */
+#define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */
+#define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */
+#define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */
+#define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */
+#define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */
+#define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */
+#define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */
+#define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */
+#define Y2_IS_PSM_ACK BIT_7 /* PSM Ack (Yukon Optima) */
+#define Y2_IS_PTP_TIST BIT_6 /* PTP TIme Stamp (Yukon Optima) */
+#define Y2_IS_PHY_QLNK BIT_5 /* PHY Quick Link (Yukon Optima) */
+#define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */
+#define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */
+#define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */
+#define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */
+#define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */
+
+#define Y2_IS_L1_MASK 0x0000001f /* IRQ Mask for port 1 */
+
+#define Y2_IS_L2_MASK 0x00001f00 /* IRQ Mask for port 2 */
+
+#define Y2_IS_ALL_MSK 0xef001f1f /* All Interrupt bits */
+
+#define Y2_IS_PORT_A (Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1)
+#define Y2_IS_PORT_B (Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2)
+
+/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
+/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
+/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
+#define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */
+#define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */
+#define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */
+#define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */
+#define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */
+#define Y2_IS_PCI_NEXP BIT_24 /* PCI-Express error similar to PCI error */
+#define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */
+#define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */
+#define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */
+#define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */
+#define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */
+#define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */
+#define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */
+#define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */
+#define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */
+#define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */
+#define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */
+#define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */
+
+#define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 | Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1)
+#define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2)
+
+#define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | \
+ Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK)
+
+/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
+#define CFG_CHIP_R_MSK (0x0f<<4) /* Bit 7.. 4: Chip Revision */
+#define CFG_DIS_M2_CLK BIT_1 /* Disable Clock for 2nd MAC */
+#define CFG_SNG_MAC BIT_0 /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */
+
+/* B2_CHIP_ID 8 bit Chip Identification Number */
+#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
+#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
+#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */
+#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */
+#define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */
+#define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */
+#define CHIP_ID_YUKON_EX 0xb5 /* Chip ID for YUKON-2 Extreme */
+#define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */
+#define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */
+#define CHIP_ID_YUKON_FE_P 0xb8 /* Chip ID for YUKON-2 FE+ */
+#define CHIP_ID_YUKON_SUPR 0xb9 /* Chip ID for YUKON-2 Supreme */
+#define CHIP_ID_YUKON_UL_2 0xba /* Chip ID for YUKON-2 Ultra 2 */
+#define CHIP_ID_YUKON_UNKNOWN 0xbb
+#define CHIP_ID_YUKON_OPT 0xbc /* Chip ID for YUKON-2 Optima */
+
+#define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */
+#define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */
+#define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */
+#define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */
+
+#define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A1/A0 */
+#define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */
+#define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */
+
+#define CHIP_REV_YU_EC_U_A0 1
+#define CHIP_REV_YU_EC_U_A1 2
+
+#define CHIP_REV_YU_FE_P_A0 0 /* Chip Rev. for Yukon-2 FE+ A0 */
+
+#define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */
+#define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */
+
+/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
+#define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */
+#define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */
+#define Y2_COR_CLK_LNK2_DIS BIT_5 /* Disable Core clock Link 2 */
+#define Y2_PCI_CLK_LNK2_DIS BIT_4 /* Disable PCI clock Link 2 */
+#define Y2_STATUS_LNK1_INAC BIT_3 /* Status Link 1 inactiv (0 = activ) */
+#define Y2_CLK_GAT_LNK1_DIS BIT_2 /* Disable clock gating Link 1 */
+#define Y2_COR_CLK_LNK1_DIS BIT_1 /* Disable Core clock Link 1 */
+#define Y2_PCI_CLK_LNK1_DIS BIT_0 /* Disable PCI clock Link 1 */
+
+/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */
+#define CFG_LED_MODE_MSK (0x07<<2) /* Bit 4.. 2: LED Mode Mask */
+#define CFG_LINK_2_AVAIL BIT_1 /* Link 2 available */
+#define CFG_LINK_1_AVAIL BIT_0 /* Link 1 available */
+
+#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2)
+#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL)
+
+/* B2_E_3 8 bit lower 4 bits used for HW self test result */
+#define B2_E3_RES_MASK 0x0f
+
+/* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */
+/* Yukon-EC/FE */
+#define Y2_CLK_DIV_VAL_MSK (0xff<<16) /* Bit 23..16: Clock Divisor Value */
+#define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK)
+/* Yukon-2 */
+#define Y2_CLK_DIV_VAL2_MSK (0x07<<21) /* Bit 23..21: Clock Divisor Value */
+#define Y2_CLK_SELECT2_MSK (0x1f<<16) /* Bit 20..16: Clock Select */
+#define Y2_CLK_DIV_VAL_2(x) (SHIFT21 (x) & Y2_CLK_DIV_VAL2_MSK)
+#define Y2_CLK_SEL_VAL_2(x) (SHIFT16 (x) & Y2_CLK_SELECT2_MSK)
+#define Y2_CLK_DIV_ENA BIT_1 /* Enable Core Clock Division */
+#define Y2_CLK_DIV_DIS BIT_0 /* Disable Core Clock Division */
+
+/* B2_TI_CTRL 8 bit Timer control */
+/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
+#define TIM_START BIT_2 /* Start Timer */
+#define TIM_STOP BIT_1 /* Stop Timer */
+#define TIM_CLR_IRQ BIT_0 /* Clear Timer IRQ (!IRQM) */
+
+/* B2_TI_TEST 8 Bit Timer Test */
+/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
+/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
+#define TIM_T_ON BIT_2 /* Test mode on */
+#define TIM_T_OFF BIT_1 /* Test mode off */
+#define TIM_T_STEP BIT_0 /* Test step */
+
+/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
+/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
+#define DPT_MSK 0x00ffffff /* Bit 23.. 0: Desc Poll Timer Bits */
+
+/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
+#define DPT_START BIT_1 /* Start Descriptor Poll Timer */
+#define DPT_STOP BIT_0 /* Stop Descriptor Poll Timer */
+
+/* B2_TST_CTRL1 8 bit Test Control Register 1 */
+#define TST_FRC_DPERR_MR BIT_7 /* force DATAPERR on MST RD */
+#define TST_FRC_DPERR_MW BIT_6 /* force DATAPERR on MST WR */
+#define TST_FRC_DPERR_TR BIT_5 /* force DATAPERR on TRG RD */
+#define TST_FRC_DPERR_TW BIT_4 /* force DATAPERR on TRG WR */
+#define TST_FRC_APERR_M BIT_3 /* force ADDRPERR on MST */
+#define TST_FRC_APERR_T BIT_2 /* force ADDRPERR on TRG */
+#define TST_CFG_WRITE_ON BIT_1 /* Enable Config Reg WR */
+#define TST_CFG_WRITE_OFF BIT_0 /* Disable Config Reg WR */
+
+/* B2_GP_IO */
+#define GLB_GPIO_CLK_DEB_ENA BIT_31 /* Clock Debug Enable */
+#define GLB_GPIO_CLK_DBG_MSK 0x3c000000 /* Clock Debug */
+
+#define GLB_GPIO_INT_RST_D3_DIS BIT_15 /* Disable Internal Reset After D3 to D0 */
+#define GLB_GPIO_LED_PAD_SPEED_UP BIT_14 /* LED PAD Speed Up */
+#define GLB_GPIO_STAT_RACE_DIS BIT_13 /* Status Race Disable */
+#define GLB_GPIO_TEST_SEL_MSK 0x00001800 /* Testmode Select */
+#define GLB_GPIO_TEST_SEL_BASE BIT_11
+#define GLB_GPIO_RAND_ENA BIT_10 /* Random Enable */
+#define GLB_GPIO_RAND_BIT_1 BIT_9 /* Random Bit 1 */
+
+/* B2_I2C_CTRL 32 bit I2C HW Control Register */
+#define I2C_FLAG BIT_31 /* Start read/write if WR */
+#define I2C_ADDR (0x7fff<<16) /* Bit 30..16: Addr to be RD/WR */
+#define I2C_DEV_SEL (0x7f<<9) /* Bit 15.. 9: I2C Device Select */
+#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
+#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */
+#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */
+#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */
+#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */
+#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */
+#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */
+#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */
+#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */
+#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */
+#define I2C_STOP BIT_0 /* Interrupt I2C transfer */
+
+/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
+#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */
+
+/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */
+#define I2C_DATA_DIR BIT_2 /* direction of I2C_DATA */
+#define I2C_DATA BIT_1 /* I2C Data Port */
+#define I2C_CLK BIT_0 /* I2C Clock Port */
+
+/* I2C Address */
+#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */
+
+
+/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
+#define BSC_START BIT_1 /* Start Blink Source Counter */
+#define BSC_STOP BIT_0 /* Stop Blink Source Counter */
+
+/* B2_BSC_STAT 8 bit Blink Source Counter Status */
+#define BSC_SRC BIT_0 /* Blink Source, 0=Off / 1=On */
+
+/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
+#define BSC_T_ON BIT_2 /* Test mode on */
+#define BSC_T_OFF BIT_1 /* Test mode off */
+#define BSC_T_STEP BIT_0 /* Test step */
+
+/* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */
+#define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */
+#define PEX_DB_ACCESS BIT_30 /* Access to debug register */
+
+/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
+#define RAM_ADR_RAN 0x0007ffff /* Bit 18.. 0: RAM Address Range */
+
+/* RAM Interface Registers */
+/* B3_RI_CTRL 16 bit RAM Interface Control Register */
+#define RI_CLR_RD_PERR BIT_9 /* Clear IRQ RAM Read Parity Err */
+#define RI_CLR_WR_PERR BIT_8 /* Clear IRQ RAM Write Parity Err */
+#define RI_RST_CLR BIT_1 /* Clear RAM Interface Reset */
+#define RI_RST_SET BIT_0 /* Set RAM Interface Reset */
+
+#define MSK_RI_TO_53 36 /* RAM interface timeout */
+
+/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
+/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
+/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
+/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
+/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
+#define TXA_MAX_VAL 0x00ffffff/* Bit 23.. 0: Max TXA Timer/Cnt Val */
+
+/* TXA_CTRL 8 bit Tx Arbiter Control Register */
+#define TXA_ENA_FSYNC BIT_7 /* Enable force of sync Tx queue */
+#define TXA_DIS_FSYNC BIT_6 /* Disable force of sync Tx queue */
+#define TXA_ENA_ALLOC BIT_5 /* Enable alloc of free bandwidth */
+#define TXA_DIS_ALLOC BIT_4 /* Disable alloc of free bandwidth */
+#define TXA_START_RC BIT_3 /* Start sync Rate Control */
+#define TXA_STOP_RC BIT_2 /* Stop sync Rate Control */
+#define TXA_ENA_ARB BIT_1 /* Enable Tx Arbiter */
+#define TXA_DIS_ARB BIT_0 /* Disable Tx Arbiter */
+
+/* TXA_TEST 8 bit Tx Arbiter Test Register */
+#define TXA_INT_T_ON BIT_5 /* Tx Arb Interval Timer Test On */
+#define TXA_INT_T_OFF BIT_4 /* Tx Arb Interval Timer Test Off */
+#define TXA_INT_T_STEP BIT_3 /* Tx Arb Interval Timer Step */
+#define TXA_LIM_T_ON BIT_2 /* Tx Arb Limit Timer Test On */
+#define TXA_LIM_T_OFF BIT_1 /* Tx Arb Limit Timer Test Off */
+#define TXA_LIM_T_STEP BIT_0 /* Tx Arb Limit Timer Step */
+
+/* TXA_STAT 8 bit Tx Arbiter Status Register */
+#define TXA_PRIO_XS BIT_0 /* sync queue has prio to send */
+
+/* Q_BC 32 bit Current Byte Counter */
+#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
+
+/* Rx BMU Control / Status Registers (Yukon-2) */
+#define BMU_IDLE BIT_31 /* BMU Idle State */
+#define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */
+#define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */
+#define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */
+#define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */
+#define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */
+#define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */
+#define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */
+#define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */
+#define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */
+#define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */
+#define BMU_START BIT_8 /* Start Rx/Tx Queue */
+#define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */
+#define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */
+#define BMU_FIFO_ENA BIT_5 /* Enable FIFO */
+#define BMU_FIFO_RST BIT_4 /* Reset FIFO */
+#define BMU_OP_ON BIT_3 /* BMU Operational On */
+#define BMU_OP_OFF BIT_2 /* BMU Operational Off */
+#define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */
+#define BMU_RST_SET BIT_0 /* Set BMU Reset */
+
+#define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR)
+#define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | BMU_FIFO_ENA | BMU_OP_ON)
+
+/* Tx BMU Control / Status Registers (Yukon-2) */
+/* Bit 31: same as for Rx */
+#define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */
+#define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */
+#define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */
+/* Bit 10..0: same as for Rx */
+
+/* Q_F 32 bit Flag Register */
+#define F_TX_CHK_AUTO_OFF BIT_31 /* Tx checksum auto-calc Off(Yukon EX)*/
+#define F_TX_CHK_AUTO_ON BIT_30 /* Tx checksum auto-calc On(Yukon EX)*/
+#define F_ALM_FULL BIT_28 /* Rx FIFO: almost full */
+#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */
+#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */
+#define F_WM_REACHED BIT_25 /* Watermark reached */
+#define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */
+#define F_FIFO_LEVEL (0x1f<<16)
+/* Bit 23..16: # of Qwords in FIFO */
+#define F_WATER_MARK 0x0007ff/* Bit 10.. 0: Watermark */
+
+/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/
+/* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */
+#define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */
+#define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */
+#define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */
+#define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */
+
+/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
+/* RB_START 32 bit RAM Buffer Start Address */
+/* RB_END 32 bit RAM Buffer End Address */
+/* RB_WP 32 bit RAM Buffer Write Pointer */
+/* RB_RP 32 bit RAM Buffer Read Pointer */
+/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
+/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
+/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
+/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
+/* RB_PC 32 bit RAM Buffer Packet Counter */
+/* RB_LEV 32 bit RAM Buffer Level Register */
+#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
+
+/* RB_TST2 8 bit RAM Buffer Test Register 2 */
+#define RB_PC_DEC BIT_3 /* Packet Counter Decrement */
+#define RB_PC_T_ON BIT_2 /* Packet Counter Test On */
+#define RB_PC_T_OFF BIT_1 /* Packet Counter Test Off */
+#define RB_PC_INC BIT_0 /* Packet Counter Increment */
+
+/* RB_TST1 8 bit RAM Buffer Test Register 1 */
+#define RB_WP_T_ON BIT_6 /* Write Pointer Test On */
+#define RB_WP_T_OFF BIT_5 /* Write Pointer Test Off */
+#define RB_WP_INC BIT_4 /* Write Pointer Increment */
+#define RB_RP_T_ON BIT_2 /* Read Pointer Test On */
+#define RB_RP_T_OFF BIT_1 /* Read Pointer Test Off */
+#define RB_RP_INC BIT_0 /* Read Pointer Increment */
+
+/* RB_CTRL 8 bit RAM Buffer Control Register */
+#define RB_ENA_STFWD BIT_5 /* Enable Store & Forward */
+#define RB_DIS_STFWD BIT_4 /* Disable Store & Forward */
+#define RB_ENA_OP_MD BIT_3 /* Enable Operation Mode */
+#define RB_DIS_OP_MD BIT_2 /* Disable Operation Mode */
+#define RB_RST_CLR BIT_1 /* Clear RAM Buf STM Reset */
+#define RB_RST_SET BIT_0 /* Set RAM Buf STM Reset */
+
+/* RAM Buffer High Pause Threshold values */
+#define MSK_RB_ULPP (8 * 1024) /* Upper Level in kB/8 */
+#define MSK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
+#define MSK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
+
+/* Threshold values for Yukon-EC Ultra */
+#define MSK_ECU_ULPP 0x0080 /* Upper Pause Threshold (multiples of 8) */
+#define MSK_ECU_LLPP 0x0060 /* Lower Pause Threshold (multiples of 8) */
+#define MSK_ECU_AE_THR 0x0070 /* Almost Empty Threshold */
+#define MSK_ECU_TXFF_LEV 0x01a0 /* Tx BMU FIFO Level */
+#define MSK_ECU_JUMBO_WM 0x01
+
+#define MSK_BMU_RX_WM 0x80 /* BMU Rx Watermark */
+#define MSK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
+/* performance sensitive drivers should set this define to 0x80 */
+#define MSK_BMU_RX_WM_PEX 0x600 /* BMU Rx Watermark for PEX */
+
+/* Receive and Transmit Queues */
+#define Q_R1 0x0000 /* Receive Queue 1 */
+#define Q_R2 0x0080 /* Receive Queue 2 */
+#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
+#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
+#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
+#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
+
+#define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */
+#define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */
+#define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */
+#define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */
+
+#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs))
+
+/* Minimum RAM Buffer Rx Queue Size */
+#define MSK_MIN_RXQ_SIZE 10
+/* Minimum RAM Buffer Tx Queue Size */
+#define MSK_MIN_TXQ_SIZE 10
+/* Percentage of queue size from whole memory. 80 % for receive */
+#define MSK_RAM_QUOTA_RX 80
+
+/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
+#define WOL_CTL_LINK_CHG_OCC BIT_15
+#define WOL_CTL_MAGIC_PKT_OCC BIT_14
+#define WOL_CTL_PATTERN_OCC BIT_13
+#define WOL_CTL_CLEAR_RESULT BIT_12
+#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11
+#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10
+#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9
+#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8
+#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7
+#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6
+#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5
+#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4
+#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3
+#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2
+#define WOL_CTL_ENA_PATTERN_UNIT BIT_1
+#define WOL_CTL_DIS_PATTERN_UNIT BIT_0
+
+#define WOL_CTL_DEFAULT (WOL_CTL_DIS_PME_ON_LINK_CHG | WOL_CTL_DIS_PME_ON_PATTERN | \
+ WOL_CTL_DIS_PME_ON_MAGIC_PKT | WOL_CTL_DIS_LINK_CHG_UNIT | \
+ WOL_CTL_DIS_PATTERN_UNIT | WOL_CTL_DIS_MAGIC_PKT_UNIT)
+
+/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
+#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
+
+/* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */
+#define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */
+#define WOL_PATT_MATCH_PME_ALL 0x7f
+
+
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */
+#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */
+#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
+#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
+#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
+#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
+#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
+#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */
+#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
+/* Marvel-specific registers */
+#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */
+#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
+/* 0x0b - 0x0e: reserved */
+#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
+#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Control Reg */
+#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Status Reg */
+#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */
+#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
+#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */
+#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */
+#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */
+#define PHY_MARV_PORT_IRQ 0x17 /* 16 bit r/o Port 0 IRQ (88E1111 only) */
+#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */
+#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */
+#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */
+#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */
+#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */
+#define PHY_MARV_PAGE_ADDR 0x1d /* 16 bit r/w Extended Page Address Reg */
+#define PHY_MARV_PAGE_DATA 0x1e /* 16 bit r/w Extended Page Data Reg */
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+#define PHY_MARV_FE_LED_PAR 0x16 /* 16 bit r/w LED Parallel Select Reg. */
+#define PHY_MARV_FE_LED_SER 0x17 /* 16 bit r/w LED Stream Select S. LED */
+#define PHY_MARV_FE_VCT_TX 0x1a /* 16 bit r/w VCT Reg. for TXP/N Pins */
+#define PHY_MARV_FE_VCT_RX 0x1b /* 16 bit r/o VCT Reg. for RXP/N Pins */
+#define PHY_MARV_FE_SPEC_2 0x1c /* 16 bit r/w Specific Control Reg. 2 */
+
+#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */
+#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */
+#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: Speed select, lower bit */
+#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */
+#define PHY_CT_PDOWN (1<<11) /* Bit 11: Power Down Mode */
+#define PHY_CT_ISOL (1<<10) /* Bit 10: Isolate Mode */
+#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */
+#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */
+#define PHY_CT_COL_TST (1<<7) /* Bit 7: Collision Test enabled */
+#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: Speed select, upper bit */
+
+#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */
+#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */
+#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */
+
+#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */
+#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: Preamble Suppression */
+#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */
+#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */
+#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */
+#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */
+#define PHY_ST_JAB_DET (1<<1) /* Bit 1: Jabber Detected */
+#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */
+
+#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */
+#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */
+#define PHY_I1_REV_MSK 0xf /* Bit 3.. 0: Revision Number */
+
+/* different Marvell PHY Ids */
+#define PHY_MARV_ID0_VAL 0x0141 /* Marvell Unique Identifier */
+
+#define PHY_MARV_ID1_B0 0x0C23 /* Yukon (PHY 88E1011) */
+#define PHY_MARV_ID1_B2 0x0C25 /* Yukon-Plus (PHY 88E1011) */
+#define PHY_MARV_ID1_C2 0x0CC2 /* Yukon-EC (PHY 88E1111) */
+#define PHY_MARV_ID1_Y2 0x0C91 /* Yukon-2 (PHY 88E1112) */
+#define PHY_MARV_ID1_FE 0x0C83 /* Yukon-FE (PHY 88E3082 Rev.A1) */
+#define PHY_MARV_ID1_ECU 0x0CB0 /* Yukon-2 (PHY 88E1149 Rev.B2?) */
+
+/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
+#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
+#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
+#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
+#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */
+#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
+#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
+#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
+
+/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
+/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/
+#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */
+#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */
+#define PHY_M_AN_RF BIT_13 /* Remote Fault */
+#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */
+#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */
+#define PHY_M_AN_100_T4 BIT_9 /* Not cap. 100Base-T4 (always 0) */
+#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */
+#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */
+#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */
+#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */
+#define PHY_M_AN_SEL_MSK (0x1f<<4) /* Bit 4.. 0: Selector Field Mask */
+
+/* special defines for FIBER (88E1011S only) */
+#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */
+#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */
+#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */
+#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */
+
+/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
+#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */
+#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */
+#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */
+#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */
+
+/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
+#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
+#define PHY_M_1000C_MSE BIT_12 /* Manual Master/Slave Enable */
+#define PHY_M_1000C_MSC BIT_11 /* M/S Configuration (1=Master) */
+#define PHY_M_1000C_MPD BIT_10 /* Multi-Port Device */
+#define PHY_M_1000C_AFD BIT_9 /* Advertise Full Duplex */
+#define PHY_M_1000C_AHD BIT_8 /* Advertise Half Duplex */
+
+/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
+#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */
+#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */
+#define PHY_M_PC_ASS_CRS_TX BIT_11 /* Assert CRS on Transmit */
+#define PHY_M_PC_FL_GOOD BIT_10 /* Force Link Good */
+#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */
+#define PHY_M_PC_ENA_EXT_D BIT_7 /* Enable Ext. Distance (10BT) */
+#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */
+#define PHY_M_PC_DIS_125CLK BIT_4 /* Disable 125 CLK */
+#define PHY_M_PC_MAC_POW_UP BIT_3 /* MAC Power up */
+#define PHY_M_PC_SQE_T_ENA BIT_2 /* SQE Test Enabled */
+#define PHY_M_PC_POL_R_DIS BIT_1 /* Polarity Reversal Disabled */
+#define PHY_M_PC_DIS_JABBER BIT_0 /* Disable Jabber */
+
+#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */
+#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */
+
+#define PHY_M_PC_MDI_XMODE(x) (SHIFT5(x) & PHY_M_PC_MDIX_MSK)
+
+#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
+#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
+#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
+
+/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
+#define PHY_M_PC_DIS_LINK_P BIT_15 /* Disable Link Pulses */
+#define PHY_M_PC_DSC_MSK (7<<12) /* Bit 14..12: Downshift Counter */
+#define PHY_M_PC_DOWN_S_ENA BIT_11 /* Downshift Enable */
+/* !!! Errata in spec. (1 = disable) */
+
+#define PHY_M_PC_DSC(x) (SHIFT12(x) & PHY_M_PC_DSC_MSK)
+/* 000=1x; 001=2x; 010=3x; 011=4x */
+/* 100=5x; 101=6x; 110=7x; 111=8x */
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+#define PHY_M_PC_ENA_DTE_DT BIT_15 /* Enable Data Terminal Equ. (DTE) Detect */
+#define PHY_M_PC_ENA_ENE_DT BIT_14 /* Enable Energy Detect (sense & pulse) */
+#define PHY_M_PC_DIS_NLP_CK BIT_13 /* Disable Normal Link Puls (NLP) Check */
+#define PHY_M_PC_ENA_LIP_NP BIT_12 /* Enable Link Partner Next Page Reg. */
+#define PHY_M_PC_DIS_NLP_GN BIT_11 /* Disable Normal Link Puls Generation */
+#define PHY_M_PC_DIS_SCRAMB BIT_9 /* Disable Scrambler */
+#define PHY_M_PC_DIS_FEFI BIT_8 /* Disable Far End Fault Indic. (FEFI) */
+#define PHY_M_PC_SH_TP_SEL BIT_6 /* Shielded Twisted Pair Select */
+#define PHY_M_PC_RX_FD_MSK (3<<2) /* Bit 3.. 2: Rx FIFO Depth Mask */
+
+/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
+#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */
+#define PHY_M_PS_SPEED_1000 BIT_15 /* 10 = 1000 Mbps */
+#define PHY_M_PS_SPEED_100 BIT_14 /* 01 = 100 Mbps */
+#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */
+#define PHY_M_PS_FULL_DUP BIT_13 /* Full Duplex */
+#define PHY_M_PS_PAGE_REC BIT_12 /* Page Received */
+#define PHY_M_PS_SPDUP_RES BIT_11 /* Speed & Duplex Resolved */
+#define PHY_M_PS_LINK_UP BIT_10 /* Link Up */
+#define PHY_M_PS_CABLE_MSK (7<<7) /* Bit 9.. 7: Cable Length Mask */
+#define PHY_M_PS_MDI_X_STAT BIT_6 /* MDI Crossover Stat (1=MDIX) */
+#define PHY_M_PS_DOWNS_STAT BIT_5 /* Downshift Status (1=downsh.) */
+#define PHY_M_PS_ENDET_STAT BIT_4 /* Energy Detect Status (1=act) */
+#define PHY_M_PS_TX_P_EN BIT_3 /* Tx Pause Enabled */
+#define PHY_M_PS_RX_P_EN BIT_2 /* Rx Pause Enabled */
+#define PHY_M_PS_POL_REV BIT_1 /* Polarity Reversed */
+#define PHY_M_PS_JABBER BIT_0 /* Jabber */
+
+#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+#define PHY_M_PS_DTE_DETECT BIT_15 /* Data Terminal Equipment (DTE) Detected */
+#define PHY_M_PS_RES_SPEED BIT_14 /* Resolved Speed (1=100 Mbps, 0=10 Mbps */
+
+/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
+/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/
+#define PHY_M_IS_AN_ERROR BIT_15 /* Auto-Negotiation Error */
+#define PHY_M_IS_LSP_CHANGE BIT_14 /* Link Speed Changed */
+#define PHY_M_IS_DUP_CHANGE BIT_13 /* Duplex Mode Changed */
+#define PHY_M_IS_AN_PR BIT_12 /* Page Received */
+#define PHY_M_IS_AN_COMPL BIT_11 /* Auto-Negotiation Completed */
+#define PHY_M_IS_LST_CHANGE BIT_10 /* Link Status Changed */
+#define PHY_M_IS_SYMB_ERROR BIT_9 /* Symbol Error */
+#define PHY_M_IS_FALSE_CARR BIT_8 /* False Carrier */
+#define PHY_M_IS_FIFO_ERROR BIT_7 /* FIFO Overflow/Underrun Error */
+#define PHY_M_IS_MDI_CHANGE BIT_6 /* MDI Crossover Changed */
+#define PHY_M_IS_DOWNSH_DET BIT_5 /* Downshift Detected */
+#define PHY_M_IS_END_CHANGE BIT_4 /* Energy Detect Changed */
+#define PHY_M_IS_DTE_CHANGE BIT_2 /* DTE Power Det. Status Changed */
+#define PHY_M_IS_POL_CHANGE BIT_1 /* Polarity Changed */
+#define PHY_M_IS_JABBER BIT_0 /* Jabber */
+
+#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+
+/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
+#define PHY_M_EC_ENA_BC_EXT BIT_15 /* Enable Block Carr. Ext. (88E1111 only) */
+#define PHY_M_EC_ENA_LIN_LB BIT_14 /* Enable Line Loopback (88E1111 only) */
+#define PHY_M_EC_DIS_LINK_P BIT_12 /* Disable Link Pulses (88E1111 only) */
+#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master Downshift Counter */
+/* (88E1011 only) */
+#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave Downshift Counter */
+/* (88E1011 only) */
+#define PHY_M_EC_DSC_MSK_2 (7<<9) /* Bit 11.. 9: Downshift Counter */
+/* (88E1111 only) */
+#define PHY_M_EC_DOWN_S_ENA BIT_8 /* Downshift Enable (88E1111 only) */
+/* !!! Errata in spec. (1 = disable) */
+#define PHY_M_EC_RX_TIM_CT BIT_7 /* RGMII Rx Timing Control*/
+#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */
+#define PHY_M_EC_FIB_AN_ENA BIT_3 /* Fiber Auto-Neg. Enable (88E1011S only) */
+#define PHY_M_EC_DTE_D_ENA BIT_2 /* DTE Detect Enable (88E1111 only) */
+#define PHY_M_EC_TX_TIM_CT BIT_1 /* RGMII Tx Timing Control */
+#define PHY_M_EC_TRANS_DIS BIT_0 /* Transmitter Disable (88E1111 only) */
+
+#define PHY_M_EC_M_DSC(x) (SHIFT10 (x) & PHY_M_EC_M_DSC_MSK)
+/* 00=1x; 01=2x; 10=3x; 11=4x */
+#define PHY_M_EC_S_DSC(x) (SHIFT8 (x) & PHY_M_EC_S_DSC_MSK)
+/* 00=dis; 01=1x; 10=2x; 11=3x */
+#define PHY_M_EC_MAC_S(x) (SHIFT4 (x) & PHY_M_EC_MAC_S_MSK)
+/* 01X=0; 110=2.5; 111=25 (MHz) */
+
+#define PHY_M_EC_DSC_2(x) (SHIFT9 (x) & PHY_M_EC_DSC_MSK_2)
+/* 000=1x; 001=2x; 010=3x; 011=4x */
+/* 100=5x; 101=6x; 110=7x; 111=8x */
+#define MAC_TX_CLK_0_MHZ 2
+#define MAC_TX_CLK_2_5_MHZ 6
+#define MAC_TX_CLK_25_MHZ 7
+
+/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
+#define PHY_M_LEDC_DIS_LED BIT_15 /* Disable LED */
+#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */
+#define PHY_M_LEDC_F_INT BIT_11 /* Force Interrupt */
+#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */
+#define PHY_M_LEDC_DP_C_LSB BIT_7 /* Duplex Control (LSB, 88E1111 only) */
+#define PHY_M_LEDC_TX_C_LSB BIT_6 /* Tx Control (LSB, 88E1111 only) */
+#define PHY_M_LEDC_LK_C_MSK (7<<3) /* Bit 5.. 3: Link Control Mask */
+/* (88E1111 only) */
+#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */
+/* (88E1011 only) */
+#define PHY_M_LEDC_DP_CTRL BIT_2 /* Duplex Control */
+#define PHY_M_LEDC_DP_C_MSB BIT_2 /* Duplex Control (MSB, 88E1111 only) */
+#define PHY_M_LEDC_RX_CTRL BIT_1 /* Rx Activity / Link */
+#define PHY_M_LEDC_TX_CTRL BIT_0 /* Tx Activity / Link */
+#define PHY_M_LEDC_TX_C_MSB BIT_0 /* Tx Control (MSB, 88E1111 only) */
+
+#define PHY_M_LED_PULS_DUR(x) (SHIFT12 (x) & PHY_M_LEDC_PULS_MSK)
+
+#define PULS_NO_STR 0 /* no pulse stretching */
+#define PULS_21MS 1 /* 21 ms to 42 ms */
+#define PULS_42MS 2 /* 42 ms to 84 ms */
+#define PULS_84MS 3 /* 84 ms to 170 ms */
+#define PULS_170MS 4 /* 170 ms to 340 ms */
+#define PULS_340MS 5 /* 340 ms to 670 ms */
+#define PULS_670MS 6 /* 670 ms to 1.3 s */
+#define PULS_1300MS 7 /* 1.3 s to 2.7 s */
+
+#define PHY_M_LED_BLINK_RT(x) (SHIFT8 (x) & PHY_M_LEDC_BL_R_MSK)
+
+#define BLINK_42MS 0 /* 42 ms */
+#define BLINK_84MS 1 /* 84 ms */
+#define BLINK_170MS 2 /* 170 ms */
+#define BLINK_340MS 3 /* 340 ms */
+#define BLINK_670MS 4 /* 670 ms */
+
+/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
+#define PHY_M_LED_MO_SGMII(x) SHIFT14 (x) /* Bit 15..14: SGMII AN Timer */
+#define PHY_M_LED_MO_DUP(x) SHIFT10 (x) /* Bit 11..10: Duplex */
+#define PHY_M_LED_MO_10(x) SHIFT8 (x) /* Bit 9.. 8: Link 10 */
+#define PHY_M_LED_MO_100(x) SHIFT6 (x) /* Bit 7.. 6: Link 100 */
+#define PHY_M_LED_MO_1000(x) SHIFT4 (x) /* Bit 5.. 4: Link 1000 */
+#define PHY_M_LED_MO_RX(x) SHIFT2 (x) /* Bit 3.. 2: Rx */
+#define PHY_M_LED_MO_TX(x) SHIFT0 (x) /* Bit 1.. 0: Tx */
+
+#define MO_LED_NORM 0
+#define MO_LED_BLINK 1
+#define MO_LED_OFF 2
+#define MO_LED_ON 3
+
+/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
+#define PHY_M_EC2_FI_IMPED BIT_6 /* Fiber Input Impedance */
+#define PHY_M_EC2_FO_IMPED BIT_5 /* Fiber Output Impedance */
+#define PHY_M_EC2_FO_M_CLK BIT_4 /* Fiber Mode Clock Enable */
+#define PHY_M_EC2_FO_BOOST BIT_3 /* Fiber Output Boost */
+#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */
+
+/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/
+#define PHY_M_FC_AUTO_SEL BIT_15 /* Fiber/Copper Auto Sel. Dis. */
+#define PHY_M_FC_AN_REG_ACC BIT_14 /* Fiber/Copper AN Reg. Access */
+#define PHY_M_FC_RESOLUTION BIT_13 /* Fiber/Copper Resolution */
+#define PHY_M_SER_IF_AN_BP BIT_12 /* Ser. IF AN Bypass Enable */
+#define PHY_M_SER_IF_BP_ST BIT_11 /* Ser. IF AN Bypass Status */
+#define PHY_M_IRQ_POLARITY BIT_10 /* IRQ polarity */
+#define PHY_M_DIS_AUT_MED BIT_9 /* Disable Aut. Medium Reg. Selection */
+/* (88E1111 only) */
+#define PHY_M_UNDOC1 BIT_7 /* undocumented bit !! */
+#define PHY_M_DTE_POW_STAT BIT_4 /* DTE Power Status (88E1111 only) */
+#define PHY_M_MODE_MASK 0xf /* Bit 3.. 0: copy of HWCFG MODE[3:0] */
+
+/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/
+#define PHY_M_CABD_ENA_TEST BIT_15 /* Enable Test (Page 0) */
+#define PHY_M_CABD_DIS_WAIT BIT_15 /* Disable Waiting Period (Page 1) */
+/* (88E1111 only) */
+#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status Mask */
+#define PHY_M_CABD_AMPL_MSK (0x1f<<8) /* Bit 12.. 8: Amplitude Mask */
+/* (88E1111 only) */
+#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance Mask */
+
+/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
+#define CABD_STAT_NORMAL 0
+#define CABD_STAT_SHORT 1
+#define CABD_STAT_OPEN 2
+#define CABD_STAT_FAIL 3
+
+/* for 10/100 Fast Ethernet PHY (88E3082 only) */
+/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/
+#define PHY_M_FELP_LED2_MSK (0xf<<8) /* Bit 11.. 8: LED2 Mask (LINK) */
+#define PHY_M_FELP_LED1_MSK (0xf<<4) /* Bit 7.. 4: LED1 Mask (ACT) */
+#define PHY_M_FELP_LED0_MSK 0xf /* Bit 3.. 0: LED0 Mask (SPEED) */
+
+#define PHY_M_FELP_LED2_CTRL(x) (SHIFT8 (x) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) (SHIFT4 (x) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) (SHIFT0 (x) & PHY_M_FELP_LED0_MSK)
+
+#define LED_PAR_CTRL_COLX 0x00
+#define LED_PAR_CTRL_ERROR 0x01
+#define LED_PAR_CTRL_DUPLEX 0x02
+#define LED_PAR_CTRL_DP_COL 0x03
+#define LED_PAR_CTRL_SPEED 0x04
+#define LED_PAR_CTRL_LINK 0x05
+#define LED_PAR_CTRL_TX 0x06
+#define LED_PAR_CTRL_RX 0x07
+#define LED_PAR_CTRL_ACT 0x08
+#define LED_PAR_CTRL_LNK_RX 0x09
+#define LED_PAR_CTRL_LNK_AC 0x0a
+#define LED_PAR_CTRL_ACT_BL 0x0b
+#define LED_PAR_CTRL_TX_BL 0x0c
+#define LED_PAR_CTRL_RX_BL 0x0d
+#define LED_PAR_CTRL_COL_BL 0x0e
+#define LED_PAR_CTRL_INACT 0x0f
+
+/***** PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/
+#define PHY_M_FESC_DIS_WAIT BIT_2 /* Disable TDR Waiting Period */
+#define PHY_M_FESC_ENA_MCLK BIT_1 /* Enable MAC Rx Clock in sleep mode */
+#define PHY_M_FESC_SEL_CL_A BIT_0 /* Select Class A driver (100B-TX) */
+
+/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
+/***** PHY_MARV_PHY_CTRL (page 1) 16 bit r/w Fiber Specific Ctrl *****/
+#define PHY_M_FIB_FORCE_LNK BIT_10 /* Force Link Good */
+#define PHY_M_FIB_SIGD_POL BIT_9 /* SIGDET Polarity */
+#define PHY_M_FIB_TX_DIS BIT_3 /* Transmitter Disable */
+
+/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
+#define PHY_M_MAC_MD_MSK (7<<7) /* Bit 9.. 7: Mode Select Mask */
+#define PHY_M_MAC_MD_AUTO 3 /* Auto Copper/1000Base-X */
+#define PHY_M_MAC_MD_COPPER 5 /* Copper only */
+#define PHY_M_MAC_MD_1000BX 7 /* 1000Base-X only */
+#define PHY_M_MAC_MODE_SEL(x) (SHIFT7 (x) & PHY_M_MAC_MD_MSK)
+
+/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
+#define PHY_M_LEDC_LOS_MSK (0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */
+#define PHY_M_LEDC_INIT_MSK (0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */
+#define PHY_M_LEDC_STA1_MSK (0xf<<4) /* Bit 7.. 4: STAT1 LED Ctrl. Mask */
+#define PHY_M_LEDC_STA0_MSK 0xf /* Bit 3.. 0: STAT0 LED Ctrl. Mask */
+
+#define PHY_M_LEDC_LOS_CTRL(x) (SHIFT12 (x) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x) (SHIFT8 (x) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x) (SHIFT4 (x) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_LEDC_STA0_MSK)
+
+/***** PHY_MARV_PHY_STAT (page 3) 16 bit r/w Polarity Control Reg. *****/
+#define PHY_M_POLC_LS1M_MSK (0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Mask */
+#define PHY_M_POLC_IS0M_MSK (0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Mask */
+#define PHY_M_POLC_LOS_MSK (0x3<<6) /* Bit 7.. 6: LOS Pol. Ctrl. Mask */
+#define PHY_M_POLC_INIT_MSK (0x3<<4) /* Bit 5.. 4: INIT Pol. Ctrl. Mask */
+#define PHY_M_POLC_STA1_MSK (0x3<<2) /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */
+#define PHY_M_POLC_STA0_MSK 0x3 /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */
+
+#define PHY_M_POLC_LS1_P_MIX(x) (SHIFT12 (x) & PHY_M_POLC_LS1M_MSK)
+#define PHY_M_POLC_IS0_P_MIX(x) (SHIFT8 (x) & PHY_M_POLC_IS0M_MSK)
+#define PHY_M_POLC_LOS_CTRL(x) (SHIFT6 (x) & PHY_M_POLC_LOS_MSK)
+#define PHY_M_POLC_INIT_CTRL(x) (SHIFT4 (x) & PHY_M_POLC_INIT_MSK)
+#define PHY_M_POLC_STA1_CTRL(x) (SHIFT2 (x) & PHY_M_POLC_STA1_MSK)
+#define PHY_M_POLC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_POLC_STA0_MSK)
+
+/*
+ * GMAC registers
+ *
+ * The GMAC registers are 16 or 32 bits wide.
+ * The GMACs host processor interface is 16 bits wide,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * Note: NA reg = Network Address e.g DA, SA etc.
+ */
+
+/* Port Registers */
+#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */
+#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */
+#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */
+#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */
+#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */
+#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */
+#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */
+
+/* Source Address Registers */
+#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */
+#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */
+#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */
+#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */
+#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */
+#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */
+
+/* Multicast Address Hash Registers */
+#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */
+#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */
+#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */
+#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */
+
+/* Interrupt Source Registers */
+#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */
+#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */
+#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */
+
+/* Interrupt Mask Registers */
+#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */
+#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */
+#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */
+
+/* Serial Management Interface (SMI) Registers */
+#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */
+#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */
+#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */
+
+/* MIB Counters */
+#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
+#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
+
+/*
+ * MIB Counters base address definitions (low word) -
+ * use offset 4 for access to high word (32 bit r/o)
+ */
+#define GM_RXF_UC_OK (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */
+#define GM_RXF_BC_OK (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */
+#define GM_RXF_MPAUSE (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */
+#define GM_RXF_MC_OK (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */
+#define GM_RXF_FCS_ERR (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */
+#define GM_RXF_SPARE1 (GM_MIB_CNT_BASE + 40) /* Rx spare 1 */
+#define GM_RXO_OK_LO (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */
+#define GM_RXO_OK_HI (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */
+#define GM_RXO_ERR_LO (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */
+#define GM_RXO_ERR_HI (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */
+#define GM_RXF_SHT (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */
+#define GM_RXE_FRAG (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */
+#define GM_RXF_64B (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */
+#define GM_RXF_127B (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */
+#define GM_RXF_255B (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */
+#define GM_RXF_511B (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */
+#define GM_RXF_1023B (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */
+#define GM_RXF_1518B (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */
+#define GM_RXF_MAX_SZ (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */
+#define GM_RXF_LNG_ERR (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */
+#define GM_RXF_JAB_PKT (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */
+#define GM_RXF_SPARE2 (GM_MIB_CNT_BASE + 168) /* Rx spare 2 */
+#define GM_RXE_FIFO_OV (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */
+#define GM_RXF_SPARE3 (GM_MIB_CNT_BASE + 184) /* Rx spare 3 */
+#define GM_TXF_UC_OK (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */
+#define GM_TXF_BC_OK (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */
+#define GM_TXF_MPAUSE (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */
+#define GM_TXF_MC_OK (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */
+#define GM_TXO_OK_LO (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */
+#define GM_TXO_OK_HI (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */
+#define GM_TXF_64B (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */
+#define GM_TXF_127B (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */
+#define GM_TXF_255B (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */
+#define GM_TXF_511B (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */
+#define GM_TXF_1023B (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */
+#define GM_TXF_1518B (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */
+#define GM_TXF_MAX_SZ (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */
+#define GM_TXF_SPARE1 (GM_MIB_CNT_BASE + 296) /* Tx spare 1 */
+#define GM_TXF_COL (GM_MIB_CNT_BASE + 304) /* Tx Collision */
+#define GM_TXF_LAT_COL (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */
+#define GM_TXF_ABO_COL (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */
+#define GM_TXF_MUL_COL (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */
+#define GM_TXF_SNG_COL (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */
+#define GM_TXE_FIFO_UR (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * GMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ * (sc) self clearing
+ * (r/o) read only
+ */
+
+/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
+#define GM_GPSR_SPEED BIT_15 /* Port Speed (1 = 100 Mbps) */
+#define GM_GPSR_DUPLEX BIT_14 /* Duplex Mode (1 = Full) */
+#define GM_GPSR_FC_TX_DIS BIT_13 /* Tx Flow-Control Mode Disabled */
+#define GM_GPSR_LINK_UP BIT_12 /* Link Up Status */
+#define GM_GPSR_PAUSE BIT_11 /* Pause State */
+#define GM_GPSR_TX_ACTIVE BIT_10 /* Tx in Progress */
+#define GM_GPSR_EXC_COL BIT_9 /* Excessive Collisions Occured */
+#define GM_GPSR_LAT_COL BIT_8 /* Late Collisions Occured */
+#define GM_GPSR_PHY_ST_CH BIT_5 /* PHY Status Change */
+#define GM_GPSR_GIG_SPEED BIT_4 /* Gigabit Speed (1 = 1000 Mbps) */
+#define GM_GPSR_PART_MODE BIT_3 /* Partition mode */
+#define GM_GPSR_FC_RX_DIS BIT_2 /* Rx Flow-Control Mode Disabled */
+
+/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
+#define GM_GPCR_RMII_PH_ENA BIT_15 /* Enable RMII for PHY (Yukon-FE only) */
+#define GM_GPCR_RMII_LB_ENA BIT_14 /* Enable RMII Loopback (Yukon-FE only) */
+#define GM_GPCR_FC_TX_DIS BIT_13 /* Disable Tx Flow-Control Mode */
+#define GM_GPCR_TX_ENA BIT_12 /* Enable Transmit */
+#define GM_GPCR_RX_ENA BIT_11 /* Enable Receive */
+#define GM_GPCR_LOOP_ENA BIT_9 /* Enable MAC Loopback Mode */
+#define GM_GPCR_PART_ENA BIT_8 /* Enable Partition Mode */
+#define GM_GPCR_GIGS_ENA BIT_7 /* Gigabit Speed (1000 Mbps) */
+#define GM_GPCR_FL_PASS BIT_6 /* Force Link Pass */
+#define GM_GPCR_DUP_FULL BIT_5 /* Full Duplex Mode */
+#define GM_GPCR_FC_RX_DIS BIT_4 /* Disable Rx Flow-Control Mode */
+#define GM_GPCR_SPEED_100 BIT_3 /* Port Speed 100 Mbps */
+#define GM_GPCR_AU_DUP_DIS BIT_2 /* Disable Auto-Update Duplex */
+#define GM_GPCR_AU_FCT_DIS BIT_1 /* Disable Auto-Update Flow-C. */
+#define GM_GPCR_AU_SPD_DIS BIT_0 /* Disable Auto-Update Speed */
+
+#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | GM_GPCR_AU_SPD_DIS)
+
+/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
+#define GM_TXCR_FORCE_JAM BIT_15 /* Force Jam / Flow-Control */
+#define GM_TXCR_CRC_DIS BIT_14 /* Disable insertion of CRC */
+#define GM_TXCR_PAD_DIS BIT_13 /* Disable padding of packets */
+#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold Mask */
+#define GM_TXCR_PAD_PAT_MSK 0xff /* Bit 7.. 0: Padding Pattern Mask */
+/* (Yukon-2 only) */
+
+#define TX_COL_THR(x) (SHIFT10 (x) & GM_TXCR_COL_THR_MSK)
+#define TX_COL_DEF 0x04
+
+/* GM_RX_CTRL 16 bit r/w Receive Control Register */
+#define GM_RXCR_UCF_ENA BIT_15 /* Enable Unicast filtering */
+#define GM_RXCR_MCF_ENA BIT_14 /* Enable Multicast filtering */
+#define GM_RXCR_CRC_DIS BIT_13 /* Remove 4-byte CRC */
+#define GM_RXCR_PASS_FC BIT_12 /* Pass FC packets to FIFO (Yukon-1 only) */
+
+/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
+#define GM_TXPA_JAMLEN_MSK (3<<14) /* Bit 15..14: Jam Length Mask */
+#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */
+#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8.. 4: IPG Jam to Data Mask */
+#define GM_TXPA_BO_LIM_MSK 0x0f /* Bit 3.. 0: Backoff Limit Mask */
+/* (Yukon-2 only) */
+
+#define TX_JAM_LEN_VAL(x) (SHIFT14 (x) & GM_TXPA_JAMLEN_MSK)
+#define TX_JAM_IPG_VAL(x) (SHIFT9 (x) & GM_TXPA_JAMIPG_MSK)
+#define TX_IPG_JAM_DATA(x) (SHIFT4 (x) & GM_TXPA_JAMDAT_MSK)
+#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK)
+
+#define TX_JAM_LEN_DEF 0x03
+#define TX_JAM_IPG_DEF 0x0b
+#define TX_IPG_JAM_DEF 0x1c
+#define TX_BOF_LIM_DEF 0x04
+
+/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
+#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */
+/* r/o on Yukon, r/w on Yukon-EC */
+#define GM_SMOD_LIMIT_4 BIT_10 /* 4 consecutive Tx trials */
+#define GM_SMOD_VLAN_ENA BIT_9 /* Enable VLAN (Max. Frame Len) */
+#define GM_SMOD_JUMBO_ENA BIT_8 /* Enable Jumbo (Max. Frame Len) */
+#define GM_SMOD_IPG_MSK 0x1f /* Bit 4.. 0: Inter-Packet Gap (IPG) */
+
+#define DATA_BLIND_VAL(x) (SHIFT11 (x) & GM_SMOD_DATABL_MSK)
+#define IPG_DATA_VAL(x) ((x) & GM_SMOD_IPG_MSK)
+
+#define DATA_BLIND_DEF 0x04
+#define IPG_DATA_DEF 0x1e
+
+/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
+#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */
+#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */
+#define GM_SMI_CT_OP_RD BIT_5 /* OpCode Read (0=Write)*/
+#define GM_SMI_CT_RD_VAL BIT_4 /* Read Valid (Read completed) */
+#define GM_SMI_CT_BUSY BIT_3 /* Busy (Operation in progress) */
+
+#define GM_SMI_CT_PHY_AD(x) (SHIFT11 (x) & GM_SMI_CT_PHY_A_MSK)
+#define GM_SMI_CT_REG_AD(x) (SHIFT6 (x) & GM_SMI_CT_REG_A_MSK)
+
+/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
+#define GM_PAR_MIB_CLR BIT_5 /* Set MIB Clear Counter Mode */
+#define GM_PAR_MIB_TST BIT_4 /* MIB Load Counter (Test Mode) */
+
+/* Receive Frame Status Encoding */
+#define GMR_FS_LEN_MSK (0xffff<<16) /* Bit 31..16: Rx Frame Length */
+#define GMR_FS_VLAN BIT_13 /* VLAN Packet */
+#define GMR_FS_JABBER BIT_12 /* Jabber Packet */
+#define GMR_FS_UN_SIZE BIT_11 /* Undersize Packet */
+#define GMR_FS_MC BIT_10 /* Multicast Packet */
+#define GMR_FS_BC BIT_9 /* Broadcast Packet */
+#define GMR_FS_RX_OK BIT_8 /* Receive OK (Good Packet) */
+#define GMR_FS_GOOD_FC BIT_7 /* Good Flow-Control Packet */
+#define GMR_FS_BAD_FC BIT_6 /* Bad Flow-Control Packet */
+#define GMR_FS_MII_ERR BIT_5 /* MII Error */
+#define GMR_FS_LONG_ERR BIT_4 /* Too Long Packet */
+#define GMR_FS_FRAGMENT BIT_3 /* Fragment */
+#define GMR_FS_CRC_ERR BIT_1 /* CRC Error */
+#define GMR_FS_RX_FF_OV BIT_0 /* Rx FIFO Overflow */
+
+#define GMR_FS_LEN_SHIFT 16
+
+#define GMR_FS_ANY_ERR ( \
+ GMR_FS_RX_FF_OV | \
+ GMR_FS_CRC_ERR | \
+ GMR_FS_FRAGMENT | \
+ GMR_FS_LONG_ERR | \
+ GMR_FS_MII_ERR | \
+ GMR_FS_BAD_FC | \
+ GMR_FS_GOOD_FC | \
+ GMR_FS_UN_SIZE | \
+ GMR_FS_JABBER)
+
+/* Rx GMAC FIFO Flush Mask (default) */
+#define RX_FF_FL_DEF_MSK GMR_FS_ANY_ERR
+
+/* Receive and Transmit GMAC FIFO Registers (YUKON only) */
+
+/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
+/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
+/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
+/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
+/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
+/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
+/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
+/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
+/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
+/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */
+/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
+/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
+/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
+/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
+
+/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
+#define RX_TRUNC_ON BIT_27 /* enable packet truncation */
+#define RX_TRUNC_OFF BIT_26 /* disable packet truncation */
+#define RX_VLAN_STRIP_ON BIT_25 /* enable VLAN stripping */
+#define RX_VLAN_STRIP_OFF BIT_24 /* disable VLAN stripping */
+#define GMF_RX_MACSEC_FLUSH_ON BIT_23
+#define GMF_RX_MACSEC_FLUSH_OFF BIT_22
+#define GMF_RX_OVER_ON BIT_19 /* enable flushing on receive overrun */
+#define GMF_RX_OVER_OFF BIT_18 /* disable flushing on receive overrun */
+#define GMF_ASF_RX_OVER_ON BIT_17 /* enable flushing of ASF when overrun */
+#define GMF_ASF_RX_OVER_OFF BIT_16 /* disable flushing of ASF when overrun */
+#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */
+#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */
+#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */
+#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */
+#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */
+#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */
+#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */
+#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */
+#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */
+#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */
+#define GMF_OPER_ON BIT_3 /* Operational Mode On */
+#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */
+#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */
+#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */
+
+/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */
+#define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */
+#define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */
+#define TX_VLAN_TAG_ON BIT_25 /* enable VLAN tagging */
+#define TX_VLAN_TAG_OFF BIT_24 /* disable VLAN tagging */
+#define TX_JUMBO_ENA BIT_23 /* Enable Jumbo Mode (Yukon-EC Ultra) */
+#define TX_JUMBO_DIS BIT_22 /* Disable Jumbo Mode (Yukon-EC Ultra) */
+#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */
+#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */
+#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */
+/* Bits 15..8: same as for RX_GMF_CTRL_T */
+#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */
+#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */
+#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */
+/* Bits 3..0: same as for RX_GMF_CTRL_T */
+
+#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON)
+#define GMF_TX_CTRL_DEF GMF_OPER_ON
+
+#define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */
+#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */
+
+/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
+#define GMT_ST_START BIT_2 /* Start Time Stamp Timer */
+#define GMT_ST_STOP BIT_1 /* Stop Time Stamp Timer */
+#define GMT_ST_CLR_IRQ BIT_0 /* Clear Time Stamp Timer IRQ */
+
+/* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */
+#define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */
+#define PC_POLL_RQ BIT_4 /* Poll Request Start */
+#define PC_POLL_OP_ON BIT_3 /* Operational Mode On */
+#define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */
+#define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */
+#define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */
+
+/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */
+/* This register is used by the host driver software */
+#define Y2_ASF_OS_PRES BIT_4 /* ASF operation system present */
+#define Y2_ASF_RESET BIT_3 /* ASF system in reset state */
+#define Y2_ASF_RUNNING BIT_2 /* ASF system operational */
+#define Y2_ASF_CLR_HSTI BIT_1 /* Clear ASF IRQ */
+#define Y2_ASF_IRQ BIT_0 /* Issue an IRQ to ASF system */
+
+#define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */
+#define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */
+
+/* B28_Y2_ASF_HCU_CCSR 32bit CPU Control and Status Register (Yukon EX) */
+#define Y2_ASF_HCU_CCSR_SMBALERT_MONITOR BIT_27 /* SMBALERT pin monitor */
+#define Y2_ASF_HCU_CCSR_CPU_SLEEP BIT_26 /* CPU sleep status */
+#define Y2_ASF_HCU_CCSR_CS_TO BIT_25 /* Clock Stretching Timeout */
+#define Y2_ASF_HCU_CCSR_WDOG BIT_24 /* Watchdog Reset */
+#define Y2_ASF_HCU_CCSR_CLR_IRQ_HOST BIT_17 /* Clear IRQ_HOST */
+#define Y2_ASF_HCU_CCSR_SET_IRQ_HCU BIT_16 /* Set IRQ_HCU */
+#define Y2_ASF_HCU_CCSR_AHB_RST BIT_9 /* Reset AHB bridge */
+#define Y2_ASF_HCU_CCSR_CPU_RST_MODE BIT_8 /* CPU Reset Mode */
+#define Y2_ASF_HCU_CCSR_SET_SYNC_CPU BIT_5
+#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE1 BIT_4
+#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE0 BIT_3
+#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK (BIT_4 | BIT_3) /* CPU Clock Divide */
+#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_BASE BIT_3
+#define Y2_ASF_HCU_CCSR_OS_PRSNT BIT_2 /* ASF OS Present */
+/* Microcontroller State */
+#define Y2_ASF_HCU_CCSR_UC_STATE_MSK 3
+#define Y2_ASF_HCU_CCSR_UC_STATE_BASE BIT_0
+#define Y2_ASF_HCU_CCSR_ASF_RESET 0
+#define Y2_ASF_HCU_CCSR_ASF_HALTED BIT_1
+#define Y2_ASF_HCU_CCSR_ASF_RUNNING BIT_0
+
+/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */
+/* This register is used by the ASF firmware */
+#define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */
+#define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */
+
+/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */
+#define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */
+#define SC_STAT_OP_ON BIT_3 /* Operational Mode On */
+#define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */
+#define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */
+#define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */
+
+/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
+#define GMC_SEC_RST BIT_15 /* MAC SEC RST */
+#define GMC_SEC_RST_OFF BIT_14 /* MAC SEC RST Off */
+#define GMC_BYP_MACSECRX_ON BIT_13 /* Bypass MAC SEC RX */
+#define GMC_BYP_MACSECRX_OFF BIT_12 /* Bypass MAC SEC RX Off */
+#define GMC_BYP_MACSECTX_ON BIT_11 /* Bypass MAC SEC TX */
+#define GMC_BYP_MACSECTX_OFF BIT_10 /* Bypass MAC SEC TX Off */
+#define GMC_BYP_RETR_ON BIT_9 /* Bypass MAC retransmit FIFO On */
+#define GMC_BYP_RETR_OFF BIT_8 /* Bypass MAC retransmit FIFO Off */
+#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */
+#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */
+#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */
+#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */
+#define GMC_PAUSE_ON BIT_3 /* Pause On */
+#define GMC_PAUSE_OFF BIT_2 /* Pause Off */
+#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */
+#define GMC_RST_SET BIT_0 /* Set GMAC Reset */
+
+/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
+#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */
+#define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */
+#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */
+#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */
+#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */
+#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */
+#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */
+#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */
+#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */
+#define GPC_ANEG_0 BIT_19 /* ANEG[0] */
+#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */
+#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */
+#define GPC_ANEG_3 BIT_16 /* ANEG[3] */
+#define GPC_ANEG_2 BIT_15 /* ANEG[2] */
+#define GPC_ANEG_1 BIT_14 /* ANEG[1] */
+#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */
+#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */
+#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */
+#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */
+#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */
+#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */
+#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */
+#define GPC_RST_SET BIT_0 /* Set GPHY Reset */
+
+/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
+/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
+#define GM_IS_RX_CO_OV BIT_5 /* Receive Counter Overflow IRQ */
+#define GM_IS_TX_CO_OV BIT_4 /* Transmit Counter Overflow IRQ */
+#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */
+#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */
+#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */
+#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */
+
+#define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR)
+
+// GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only)
+#define GMLC_RST_CLR BIT_1 // Clear GMAC Link Reset
+#define GMLC_RST_SET BIT_0 // Set GMAC Link Reset
+
+#define MSK_PORT_A 0
+#define MSK_PORT_B 1
+
+// Register access macros
+#define CSR_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + (reg), (val))
+#define CSR_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + (reg), (val))
+#define CSR_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + (reg), (val))
+
+#define CSR_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + (reg))
+#define CSR_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + (reg))
+#define CSR_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + (reg))
+
+#define CSR_PCI_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
+#define CSR_PCI_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
+#define CSR_PCI_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
+
+#define CSR_PCI_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + Y2_CFG_SPC + (reg))
+#define CSR_PCI_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + Y2_CFG_SPC + (reg))
+#define CSR_PCI_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + Y2_CFG_SPC + (reg))
+
+#define GMAC_REG(port, reg) ((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg))
+#define GMAC_WRITE_2(sc, port, reg, val) CSR_WRITE_2 ((sc), GMAC_REG((port), (reg)), (val))
+#define GMAC_READ_2(sc, port, reg) CSR_READ_2 ((sc), GMAC_REG((port), (reg)))
+
+// GPHY address (bits 15..11 of SMI control reg)
+#define PHY_ADDR_MARV 0
+
+#define MSK_ADDR_LO(x) ((UINT64) (x) & 0xffffffffUL)
+#define MSK_ADDR_HI(x) ((UINT64) (x) >> 32)
+
+// PCI Status error definitions (not all of these are defined in MdePkg/Include/IndustryStandard/Pci22.h
+#define PCIM_STATUS_CAPPRESENT 0x0010
+#define PCIM_STATUS_66CAPABLE 0x0020
+#define PCIM_STATUS_BACKTOBACK 0x0080
+#define PCIM_STATUS_PERRREPORT 0x0100
+#define PCIM_STATUS_SEL_FAST 0x0000
+#define PCIM_STATUS_SEL_MEDIMUM 0x0200
+#define PCIM_STATUS_SEL_SLOW 0x0400
+#define PCIM_STATUS_SEL_MASK 0x0600
+#define PCIM_STATUS_STABORT 0x0800
+#define PCIM_STATUS_RTABORT 0x1000
+#define PCIM_STATUS_RMABORT 0x2000
+#define PCIM_STATUS_SERR 0x4000
+#define PCIM_STATUS_PERR 0x8000
+
+//
+// At first I guessed 8 bytes, the size of a single descriptor, would be
+// required alignment constraints. But, it seems that Yukon II have 4096
+// bytes boundary alignment constraints.
+//
+#define MSK_RING_ALIGN 4096
+#define MSK_STAT_ALIGN 4096
+
+// Rx descriptor data structure
+struct msk_rx_desc {
+ UINT32 msk_addr;
+ UINT32 msk_control;
+};
+
+// Tx descriptor data structure
+struct msk_tx_desc {
+ UINT32 msk_addr;
+ UINT32 msk_control;
+};
+
+// Status descriptor data structure
+struct msk_stat_desc {
+ UINT32 msk_status;
+ UINT32 msk_control;
+};
+
+// Mask and shift value to get Tx async queue status for port 1
+#define STLE_TXA1_MSKL 0x00000fff
+#define STLE_TXA1_SHIFTL 0
+
+// Mask and shift value to get Tx sync queue status for port 1
+#define STLE_TXS1_MSKL 0x00fff000
+#define STLE_TXS1_SHIFTL 12
+
+// Mask and shift value to get Tx async queue status for port 2
+#define STLE_TXA2_MSKL 0xff000000
+#define STLE_TXA2_SHIFTL 24
+#define STLE_TXA2_MSKH 0x000f
+// This one shifts up
+#define STLE_TXA2_SHIFTH 8
+
+// Mask and shift value to get Tx sync queue status for port 2
+#define STLE_TXS2_MSKL 0x00000000
+#define STLE_TXS2_SHIFTL 0
+#define STLE_TXS2_MSKH 0xfff0
+#define STLE_TXS2_SHIFTH 4
+
+// YUKON-2 bit values
+#define HW_OWNER 0x80000000
+#define SW_OWNER 0x00000000
+
+#define PU_PUTIDX_VALID 0x10000000
+
+// YUKON-2 Control flags
+#define UDPTCP 0x00010000
+#define CALSUM 0x00020000
+#define WR_SUM 0x00040000
+#define INIT_SUM 0x00080000
+#define LOCK_SUM 0x00100000
+#define INS_VLAN 0x00200000
+#define FRC_STAT 0x00400000
+#define EOP 0x00800000
+
+#define TX_LOCK 0x01000000
+#define BUF_SEND 0x02000000
+#define PACKET_SEND 0x04000000
+
+#define NO_WARNING 0x40000000
+#define NO_UPDATE 0x80000000
+
+// YUKON-2 Rx/Tx opcodes defines
+#define OP_TCPWRITE 0x11000000
+#define OP_TCPSTART 0x12000000
+#define OP_TCPINIT 0x14000000
+#define OP_TCPLCK 0x18000000
+#define OP_TCPCHKSUM OP_TCPSTART
+#define OP_TCPIS (OP_TCPINIT | OP_TCPSTART)
+#define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE)
+#define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE)
+#define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE)
+#define OP_ADDR64 0x21000000
+#define OP_VLAN 0x22000000
+#define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN)
+#define OP_LRGLEN 0x24000000
+#define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN)
+#define OP_MSS 0x28000000
+#define OP_MSSVLAN (OP_MSS | OP_VLAN)
+#define OP_BUFFER 0x40000000
+#define OP_PACKET 0x41000000
+#define OP_LARGESEND 0x43000000
+
+// YUKON-2 STATUS opcodes defines
+#define OP_RXSTAT 0x60000000
+#define OP_RXTIMESTAMP 0x61000000
+#define OP_RXVLAN 0x62000000
+#define OP_RXCHKS 0x64000000
+#define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN)
+#define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN)
+#define OP_RSS_HASH 0x65000000
+#define OP_TXINDEXLE 0x68000000
+
+// YUKON-2 SPECIAL opcodes defines
+#define OP_PUTIDX 0x70000000
+
+#define STLE_OP_MASK 0xff000000
+#define STLE_CSS_MASK 0x00ff0000
+#define STLE_LEN_MASK 0x0000ffff
+
+// CSS defined in status LE(valid for descriptor V2 format)
+#define CSS_TCPUDP_CSUM_OK 0x00800000
+#define CSS_UDP 0x00400000
+#define CSS_TCP 0x00200000
+#define CSS_IPFRAG 0x00100000
+#define CSS_IPV6 0x00080000
+#define CSS_IPV4_CSUM_OK 0x00040000
+#define CSS_IPV4 0x00020000
+#define CSS_PORT 0x00010000
+
+// Descriptor Bit Definition
+// TxCtrl Transmit Buffer Control Field
+// RxCtrl Receive Buffer Control Field
+#define BMU_OWN BIT_31 // OWN bit: 0=host/1=BMU
+#define BMU_STF BIT_30 // Start of Frame
+#define BMU_EOF BIT_29 // End of Frame
+#define BMU_IRQ_EOB BIT_28 // Req "End of Buffer" IRQ
+#define BMU_IRQ_EOF BIT_27 // Req "End of Frame" IRQ
+// TxCtrl specific bits
+#define BMU_STFWD BIT_26 // (Tx) Store & Forward Frame
+#define BMU_NO_FCS BIT_25 // (Tx) Disable MAC FCS (CRC) generation
+#define BMU_SW BIT_24 // (Tx) 1 bit res. for SW use
+// RxCtrl specific bits
+#define BMU_DEV_0 BIT_26 // (Rx) Transfer data to Dev0
+#define BMU_STAT_VAL BIT_25 // (Rx) Rx Status Valid
+#define BMU_TIST_VAL BIT_24 // (Rx) Rx TimeStamp Valid
+// Bit 23..16: BMU Check Opcodes
+#define BMU_CHECK (0x55<<16) // Default BMU check
+#define BMU_TCP_CHECK (0x56<<16) // Descr with TCP ext
+#define BMU_UDP_CHECK (0x57<<16) // Descr with UDP ext (YUKON only)
+#define BMU_BBC 0xffff // Bit 15.. 0: Buffer Byte Counter
+
+/* Use 64-bit DMA in all cases in UEFI. After much discussion on the mailing
+ * list, it was determined that there is not currently a good way to detect
+ * whether 32-bit DMA should be used (if ever) or whether there are any
+ * supported platforms on which 64-bit DMA would not work */
+#define MSK_64BIT_DMA
+
+#define MSK_TX_RING_CNT 512
+#define MSK_RX_RING_CNT 512
+#define MSK_RX_BUF_ALIGN 8
+#define MSK_JUMBO_RX_RING_CNT MSK_RX_RING_CNT
+#define MSK_STAT_RING_CNT 512
+#define MSK_MAXTXSEGS 32
+#define MSK_TSO_MAXSGSIZE 4096
+#define MSK_TSO_MAXSIZE (65535 + sizeof (struct ether_vlan_header))
+
+/*
+ * It seems that the hardware requires extra decriptors(LEs) to offload
+ * TCP/UDP checksum, VLAN hardware tag inserstion and TSO.
+ *
+ * 1 descriptor for TCP/UDP checksum offload.
+ * 1 descriptor VLAN hardware tag insertion.
+ * 1 descriptor for TSO(TCP Segmentation Offload)
+ * 1 descriptor for 64bits DMA : Not applicatable due to the use of
+ * BUS_SPACE_MAXADDR_32BIT in parent DMA tag creation.
+ */
+#define MSK_RESERVED_TX_DESC_CNT 3
+
+/*
+ * Jumbo buffer stuff. Note that we must allocate more jumbo
+ * buffers than there are descriptors in the receive ring. This
+ * is because we don't know how long it will take for a packet
+ * to be released after we hand it off to the upper protocol
+ * layers. To be safe, we allocate 1.5 times the number of
+ * receive descriptors.
+ */
+/*#define MSK_JUMBO_FRAMELEN 9022
+#define MSK_JUMBO_MTU (MSK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
+#define MSK_MAX_FRAMELEN \
+ (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_CRC_LEN)
+#define MSK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN)
+*/
+
+#define htole32(x) (x) // All UEFI platforms are little endian
+#define le32toh(x) (x)
+#define ACPI_SPECFLAG_PREFETCHABLE 0x06
+#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b')
+#define RX_MBUF_SIGNATURE SIGNATURE_32 ('r','x','m','b')
+#define ETHER_CRC_POLY_LE 0xedb88320
+#define ETHER_CRC_POLY_BE 0x04c11db6
+//#define JUMBO_RX_MBUF_SIGNATURE SIGNATURE_32('j','r','x','m')
+
+typedef struct {
+ VOID *Buf;
+ UINTN Length;
+} MSK_SYSTEM_BUF;
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+ MSK_SYSTEM_BUF SystemBuf;
+} MSK_LINKED_SYSTEM_BUF;
+
+typedef struct {
+ VOID *Buf;
+ UINTN Length;
+ VOID *DmaMapping;
+} MSK_DMA_BUF;
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+ MSK_DMA_BUF DmaBuf;
+} MSK_LINKED_DMA_BUF;
+
+struct msk_txdesc {
+ MSK_DMA_BUF tx_m;
+ struct msk_tx_desc *tx_le;
+};
+
+struct msk_rxdesc {
+ MSK_DMA_BUF rx_m;
+ struct msk_rx_desc *rx_le;
+};
+
+struct msk_chain_data {
+ struct msk_txdesc msk_txdesc[MSK_TX_RING_CNT];
+ struct msk_rxdesc msk_rxdesc[MSK_RX_RING_CNT];
+ void *msk_tx_ring_map;
+ void *msk_rx_ring_map;
+ // struct msk_rxdesc msk_jumbo_rxdesc[MSK_JUMBO_RX_RING_CNT];
+ INTN msk_tx_high_addr;
+ INTN msk_tx_prod;
+ INTN msk_tx_cons;
+ INTN msk_tx_cnt;
+ INTN msk_tx_put;
+ INTN msk_rx_cons;
+ INTN msk_rx_prod;
+ INTN msk_rx_putwm;
+};
+
+struct msk_ring_data {
+ struct msk_tx_desc *msk_tx_ring;
+ EFI_PHYSICAL_ADDRESS msk_tx_ring_paddr;
+ struct msk_rx_desc *msk_rx_ring;
+ EFI_PHYSICAL_ADDRESS msk_rx_ring_paddr;
+ // struct msk_rx_desc *msk_jumbo_rx_ring;
+ // EFI_PHYSICAL_ADDRESS msk_jumbo_rx_ring_paddr;
+};
+
+#define MSK_TX_RING_ADDR(sc, i) \
+ ((sc)->msk_rdata.msk_tx_ring_paddr + sizeof (struct msk_tx_desc) * (i))
+#define MSK_RX_RING_ADDR(sc, i) \
+ ((sc)->msk_rdata.msk_rx_ring_paddr + sizeof (struct msk_rx_desc) * (i))
+
+#define MSK_TX_RING_SZ (sizeof (struct msk_tx_desc) * MSK_TX_RING_CNT)
+#define MSK_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_RX_RING_CNT)
+#define MSK_JUMBO_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT)
+#define MSK_STAT_RING_SZ (sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT)
+
+#define MSK_INC(x, y) ((x) = (x + 1) % y)
+#ifdef MSK_64BIT_DMA
+#define MSK_RX_INC(x, y) (x) = (x + 2) % y
+#define MSK_RX_BUF_CNT (MSK_RX_RING_CNT / 2)
+#define MSK_JUMBO_RX_BUF_CNT (MSK_JUMBO_RX_RING_CNT / 2)
+#else
+#define MSK_RX_INC(x, y) (x) = (x + 1) % y
+#define MSK_RX_BUF_CNT MSK_RX_RING_CNT
+#define MSK_JUMBO_RX_BUF_CNT MSK_JUMBO_RX_RING_CNT
+#endif
+
+#define MSK_PCI_BUS 0
+#define MSK_PCIX_BUS 1
+#define MSK_PEX_BUS 2
+
+#define MSK_PROC_DEFAULT (MSK_RX_RING_CNT / 2)
+#define MSK_PROC_MIN 30
+#define MSK_PROC_MAX (MSK_RX_RING_CNT - 1)
+
+#define MSK_INT_HOLDOFF_DEFAULT 100
+
+#define MSK_TX_TIMEOUT 5
+#define MSK_PUT_WM 10
+
+/* Forward decl. */
+struct msk_if_softc;
+
+struct msk_hw_stats {
+ /* Rx stats. */
+ UINT32 rx_ucast_frames;
+ UINT32 rx_bcast_frames;
+ UINT32 rx_pause_frames;
+ UINT32 rx_mcast_frames;
+ UINT32 rx_crc_errs;
+ UINT32 rx_spare1;
+ UINT64 rx_good_octets;
+ UINT64 rx_bad_octets;
+ UINT32 rx_runts;
+ UINT32 rx_runt_errs;
+ UINT32 rx_pkts_64;
+ UINT32 rx_pkts_65_127;
+ UINT32 rx_pkts_128_255;
+ UINT32 rx_pkts_256_511;
+ UINT32 rx_pkts_512_1023;
+ UINT32 rx_pkts_1024_1518;
+ UINT32 rx_pkts_1519_max;
+ UINT32 rx_pkts_too_long;
+ UINT32 rx_pkts_jabbers;
+ UINT32 rx_spare2;
+ UINT32 rx_fifo_oflows;
+ UINT32 rx_spare3;
+ /* Tx stats. */
+ UINT32 tx_ucast_frames;
+ UINT32 tx_bcast_frames;
+ UINT32 tx_pause_frames;
+ UINT32 tx_mcast_frames;
+ UINT64 tx_octets;
+ UINT32 tx_pkts_64;
+ UINT32 tx_pkts_65_127;
+ UINT32 tx_pkts_128_255;
+ UINT32 tx_pkts_256_511;
+ UINT32 tx_pkts_512_1023;
+ UINT32 tx_pkts_1024_1518;
+ UINT32 tx_pkts_1519_max;
+ UINT32 tx_spare1;
+ UINT32 tx_colls;
+ UINT32 tx_late_colls;
+ UINT32 tx_excess_colls;
+ UINT32 tx_multi_colls;
+ UINT32 tx_single_colls;
+ UINT32 tx_underflows;
+};
+
+/* Softc for the Marvell Yukon II controller. */
+struct msk_softc {
+ UINT32 RegBase;
+ UINT64 OriginalPciAttributes;
+ UINT8 msk_hw_id;
+ UINT8 msk_hw_rev;
+ UINT8 msk_bustype;
+ UINT8 msk_num_port;
+ INTN msk_expcap;
+ // INTN msk_pcixcap;
+ INTN msk_ramsize; /* amount of SRAM on NIC */
+ UINT32 msk_pmd; /* physical media type */
+ UINT32 msk_intrmask;
+ UINT32 msk_intrhwemask;
+ UINT32 msk_pflags;
+ INTN msk_clock;
+ struct msk_if_softc *msk_if[2];
+ INTN msk_txqsize;
+ INTN msk_rxqsize;
+ INTN msk_txqstart[2];
+ INTN msk_txqend[2];
+ INTN msk_rxqstart[2];
+ INTN msk_rxqend[2];
+ void *msk_stat_map;
+ struct msk_stat_desc *msk_stat_ring;
+ EFI_PHYSICAL_ADDRESS msk_stat_ring_paddr;
+ INTN msk_int_holdoff;
+ INTN msk_process_limit;
+ INTN msk_stat_cons;
+ EFI_EVENT Timer;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+};
+
+#define MSK_USECS(sc, us) ((sc)->msk_clock * (us))
+
+/* Softc for each logical interface. */
+struct msk_if_softc {
+ // INT32 msk_port; /* port # on controller */
+ struct msk_mii_data msk_md;
+ struct mii_data mii_d;
+ INTN msk_framesize;
+ INTN msk_phytype;
+ INTN msk_phyaddr;
+ UINT32 msk_flags;
+#define MSK_FLAG_MSI 0x0001
+#define MSK_FLAG_FASTETHER 0x0004
+#define MSK_FLAG_JUMBO 0x0008
+#define MSK_FLAG_JUMBO_NOCSUM 0x0010
+#define MSK_FLAG_RAMBUF 0x0020
+#define MSK_FLAG_DESCV2 0x0040
+#define MSK_FLAG_AUTOTX_CSUM 0x0080
+#define MSK_FLAG_NOHWVLAN 0x0100
+#define MSK_FLAG_NORXCHK 0x0200
+#define MSK_FLAG_NORX_CSUM 0x0400
+#define MSK_FLAG_SUSPEND 0x2000
+#define MSK_FLAG_DETACH 0x4000
+#define MSK_FLAG_LINK 0x8000
+ // INTN msk_watchdog_timer;
+ UINT32 msk_txq; /* Tx. Async Queue offset */
+ UINT32 msk_txsq; /* Tx. Syn Queue offset */
+ UINT32 msk_rxq; /* Rx. Qeueue offset */
+ struct msk_chain_data msk_cdata;
+ struct msk_ring_data msk_rdata;
+ struct msk_hw_stats msk_stats;
+ struct msk_softc *msk_softc; /* parent controller */
+ VOID *phy_softc; /* interface phy */
+ BOOLEAN active;
+ LIST_ENTRY TransmitQueueHead;
+ LIST_ENTRY TransmitFreeQueueHead;
+ LIST_ENTRY ReceiveQueueHead;
+ EFI_MAC_ADDRESS MacAddress;
+};
+
+#define MSK_TIMEOUT 1000
+#define MSK_PHY_POWERUP 1
+#define MSK_PHY_POWERDOWN 0
+
+#endif /* _IF_MSKREG_H_ */
diff --git a/OptionRomPkg/MarvellYukonDxe/miivar.h b/OptionRomPkg/MarvellYukonDxe/miivar.h
new file mode 100644
index 0000000000..ff2801797a
--- /dev/null
+++ b/OptionRomPkg/MarvellYukonDxe/miivar.h
@@ -0,0 +1,187 @@
+/** <at> file
+* Media Independent Interface configuration definitions. Ported from FreeBSD.
+*
+* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+/*-
+ * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
+ * NASA Ames Research Center.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the NetBSD
+ * Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/mii/miivar.h,v 1.21.10.1.4.1 2010/06/14 02:09:06 kensmith Exp $
+ */
+
+#ifndef _DEV_MII_MIIVAR_H_
+#define _DEV_MII_MIIVAR_H_
+
+/*
+ * A network interface driver has one of these structures in its softc.
+ * It is the interface from the network interface driver to the MII
+ * layer.
+ */
+struct mii_data {
+ /*
+ * PHY driver fills this in with active media status.
+ */
+ INTN mii_media_status;
+ INTN mii_media_active;
+};
+
+/*
+ * Requests that can be made to the downcall.
+ */
+#define MII_TICK 1 /* once-per-second tick */
+#define MII_MEDIACHG 2 /* user changed media; perform the switch */
+#define MII_POLLSTAT 3 /* user requested media status; fill it in */
+
+/*
+ * Each PHY driver's softc has one of these as the first member.
+ * XXX This would be better named "phy_softc", but this is the name
+ * XXX BSDI used, and we would like to have the same interface.
+ */
+struct mii_softc {
+ struct mii_data *mii_pdata; /* pointer to parent's mii_data */
+
+ INTN mii_flags; /* misc. flags; see below */
+ INTN mii_capabilities; /* capabilities from BMSR */
+ INTN mii_extcapabilities; /* extended capabilities */
+ INTN mii_ticks; /* MII_TICK counter */
+ INTN mii_anegticks; /* ticks before retrying aneg */
+ INTN mii_media_active; /* last active media */
+ INTN mii_media_status; /* last active status */
+};
+
+/* mii_flags */
+#define MIIF_INITDONE 0x0001 /* has been initialized (mii_data) */
+#define MIIF_NOISOLATE 0x0002 /* do not isolate the PHY */
+#define MIIF_NOLOOP 0x0004 /* no loopback capability */
+#define MIIF_AUTOTSLEEP 0x0010 /* use tsleep(), not callout() */
+#define MIIF_HAVEFIBER 0x0020 /* from parent: has fiber interface */
+#define MIIF_HAVE_GTCR 0x0040 /* has 100base-T2/1000base-T CR */
+#define MIIF_IS_1000X 0x0080 /* is a 1000BASE-X device */
+#define MIIF_DOPAUSE 0x0100 /* advertise PAUSE capability */
+#define MIIF_IS_HPNA 0x0200 /* is a HomePNA device */
+#define MIIF_FORCEANEG 0x0400 /* force auto-negotiation */
+
+/* Default mii_anegticks values */
+#define MII_ANEGTICKS 5
+#define MII_ANEGTICKS_GIGE 17
+
+#define MIIF_INHERIT_MASK (MIIF_NOISOLATE|MIIF_NOLOOP|MIIF_AUTOTSLEEP)
+
+#define MII_OUI_MARVELL 0x005043
+#define MII_OUI_xxMARVELL 0x000ac2
+
+#define MII_MODEL_MARVELL_E1000 0x0000
+#define MII_MODEL_MARVELL_E1011 0x0002
+#define MII_MODEL_MARVELL_E1000_3 0x0003
+#define MII_MODEL_MARVELL_E1000S 0x0004
+#define MII_MODEL_MARVELL_E1000_5 0x0005
+#define MII_MODEL_MARVELL_E1000_6 0x0006
+#define MII_MODEL_MARVELL_E3082 0x0008
+#define MII_MODEL_MARVELL_E1112 0x0009
+#define MII_MODEL_MARVELL_E1149 0x000b
+#define MII_MODEL_MARVELL_E1111 0x000c
+#define MII_MODEL_MARVELL_E1116 0x0021
+#define MII_MODEL_MARVELL_E1116R 0x0024
+#define MII_MODEL_MARVELL_E1118 0x0022
+#define MII_MODEL_MARVELL_E3016 0x0026
+#define MII_MODEL_MARVELL_PHYG65G 0x0027
+#define MII_MODEL_xxMARVELL_E1000 0x0000
+#define MII_MODEL_xxMARVELL_E1011 0x0002
+#define MII_MODEL_xxMARVELL_E1000_3 0x0003
+#define MII_MODEL_xxMARVELL_E1000_5 0x0005
+#define MII_MODEL_xxMARVELL_E1111 0x000c
+
+#define MII_STR_MARVELL_E1000 "Marvell 88E1000 Gigabit PHY"
+#define MII_STR_MARVELL_E1011 "Marvell 88E1011 Gigabit PHY"
+#define MII_STR_MARVELL_E1000_3 "Marvell 88E1000_3 Gigabit PHY"
+#define MII_STR_MARVELL_E1000S "Marvell 88E1000S Gigabit PHY"
+#define MII_STR_MARVELL_E1000_5 "Marvell 88E1000_5 Gigabit PHY"
+#define MII_STR_MARVELL_E1000_6 "Marvell 88E1000_6 Gigabit PHY"
+#define MII_STR_MARVELL_E3082 "Marvell 88E3082 10/100 Fast Ethernet PHY"
+#define MII_STR_MARVELL_E1112 "Marvell 88E1112 Gigabit PHY"
+#define MII_STR_MARVELL_E1149 "Marvell 88E1149 Gigabit PHY"
+#define MII_STR_MARVELL_E1111 "Marvell 88E1111 Gigabit PHY"
+#define MII_STR_MARVELL_E1116 "Marvell 88E1116 Gigabit PHY"
+#define MII_STR_MARVELL_E1116R "Marvell 88E1116R Gigabit PHY"
+#define MII_STR_MARVELL_E1118 "Marvell 88E1118 Gigabit PHY"
+#define MII_STR_MARVELL_E3016 "Marvell 88E3016 10/100 Fast Ethernet PHY"
+#define MII_STR_MARVELL_PHYG65G "Marvell PHYG65G Gigabit PHY"
+#define MII_STR_xxMARVELL_E1000 "Marvell 88E1000 Gigabit PHY"
+#define MII_STR_xxMARVELL_E1011 "Marvell 88E1011 Gigabit PHY"
+#define MII_STR_xxMARVELL_E1000_3 "Marvell 88E1000_3 Gigabit PHY"
+#define MII_STR_xxMARVELL_E1000_5 "Marvell 88E1000_5 Gigabit PHY"
+#define MII_STR_xxMARVELL_E1111 "Marvell 88E1111 Gigabit PHY"
+
+/*
+ * Used to attach a PHY to a parent.
+ */
+struct mii_attach_args {
+ struct mii_data *mii_data; /* pointer to parent data */
+ INTN mii_id1; /* PHY ID register 1 */
+ INTN mii_id2; /* PHY ID register 2 */
+};
+
+/*
+ * Used to match a PHY.
+ */
+struct mii_phydesc {
+ UINT32 mpd_oui; /* the PHY's OUI */
+ UINT32 mpd_model; /* the PHY's model */
+ const CHAR8 *mpd_name; /* the PHY's name */
+};
+#define MII_PHY_DESC(a, b) { MII_OUI_ ## a, MII_MODEL_ ## a ## _ ## b, MII_STR_ ## a ## _ ## b }
+#define MII_PHY_END { 0, 0, NULL }
+
+#define PHY_READ(p, r) msk_phy_readreg ((p)->sc_if, (r))
+
+#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->sc_if, (r), (v))
+
+struct msk_mii_data {
+ INTN port;
+ UINT32 pmd;
+ INTN mii_flags;
+};
+
+#endif /* _DEV_MII_MIIVAR_H_ */
diff --git a/OptionRomPkg/OptionRomPkg.dsc b/OptionRomPkg/OptionRomPkg.dsc
index 3365556710..ab5d59d9f2 100644
--- a/OptionRomPkg/OptionRomPkg.dsc
+++ b/OptionRomPkg/OptionRomPkg.dsc
@@ -49,6 +49,8 @@
BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
BltLib|OptionRomPkg/Library/GopBltLib/GopBltLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
TimerLib|MdePkg/Library/BaseTimerLibNullTemplate/BaseTimerLibNullTemplate.inf
UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
@@ -110,6 +112,7 @@
OptionRomPkg/AtapiPassThruDxe/AtapiPassThruDxe.inf
OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf
+ OptionRomPkg/MarvellYukonDxe/MarvellYukonDxe.inf
OptionRomPkg/UndiRuntimeDxe/UndiRuntimeDxe.inf
OptionRomPkg/Bus/Usb/FtdiUsbSerialDxe/FtdiUsbSerialDxe.inf
OptionRomPkg/Bus/Usb/UsbNetworking/Ax88772/Ax88772.inf
--
2.11.0
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.