Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
---
MdePkg/Include/Protocol/BluetoothIo.h | 287 +++++++++++++++++-----------------
1 file changed, 144 insertions(+), 143 deletions(-)
diff --git a/MdePkg/Include/Protocol/BluetoothIo.h b/MdePkg/Include/Protocol/BluetoothIo.h
index d750767f09..50d08f18d2 100644
--- a/MdePkg/Include/Protocol/BluetoothIo.h
+++ b/MdePkg/Include/Protocol/BluetoothIo.h
@@ -1,19 +1,19 @@
/** @file
EFI Bluetooth IO Service Binding Protocol as defined in UEFI 2.5.
EFI Bluetooth IO Protocol as defined in UEFI 2.5.
- The EFI Bluetooth IO Service Binding Protocol is used to locate EFI Bluetooth IO Protocol drivers to
+ The EFI Bluetooth IO Service Binding Protocol is used to locate EFI Bluetooth IO Protocol drivers to
create and destroy child of the driver to communicate with other Bluetooth device by using Bluetooth IO protocol.
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are licensed and made available under
- the terms and conditions of the BSD License that accompanies this distribution.
+ Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php.
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
- @par Revision Reference:
+ @par Revision Reference:
This Protocol is introduced in UEFI Specification 2.5
**/
@@ -25,14 +25,14 @@
#define EFI_BLUETOOTH_IO_SERVICE_BINDING_PROTOCOL_GUID \
{ \
- 0x388278d3, 0x7b85, 0x42f0, { 0xab, 0xa9, 0xfb, 0x4b, 0xfd, 0x69, 0xf5, 0xab } \
+ 0x388278d3, 0x7b85, 0x42f0, { 0xab, 0xa9, 0xfb, 0x4b, 0xfd, 0x69, 0xf5, 0xab } \
}
-
+
#define EFI_BLUETOOTH_IO_PROTOCOL_GUID \
{ \
- 0x467313de, 0x4e30, 0x43f1, { 0x94, 0x3e, 0x32, 0x3f, 0x89, 0x84, 0x5d, 0xb5 } \
+ 0x467313de, 0x4e30, 0x43f1, { 0x94, 0x3e, 0x32, 0x3f, 0x89, 0x84, 0x5d, 0xb5 } \
}
-
+
typedef struct _EFI_BLUETOOTH_IO_PROTOCOL EFI_BLUETOOTH_IO_PROTOCOL;
///
@@ -72,51 +72,51 @@ typedef struct {
/**
Get Bluetooth device information.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param DeviceInfoSize A pointer to the size, in bytes, of the DeviceInfo buffer.
- @param DeviceInfo A pointer to a callee allocated buffer that returns Bluetooth device information.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[out] DeviceInfoSize A pointer to the size, in bytes, of the DeviceInfo buffer.
+ @param[out] DeviceInfo A pointer to a callee allocated buffer that returns Bluetooth device information.
- @retval EFI_SUCCESS The Bluetooth device information is returned successfully.
- @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth device information.
+ @retval EFI_SUCCESS The Bluetooth device information is returned successfully.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth device information.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_GET_DEVICE_INFO)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- OUT UINTN *DeviceInfoSize,
- OUT VOID **DeviceInfo
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ OUT UINTN *DeviceInfoSize,
+ OUT VOID **DeviceInfo
);
-
+
/**
Get Bluetooth SDP information.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param SdpInfoSize A pointer to the size, in bytes, of the SdpInfo buffer.
- @param SdpInfo A pointer to a callee allocated buffer that returns Bluetooth SDP information.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[out] SdpInfoSize A pointer to the size, in bytes, of the SdpInfo buffer.
+ @param[out] SdpInfo A pointer to a callee allocated buffer that returns Bluetooth SDP information.
- @retval EFI_SUCCESS The Bluetooth device information is returned successfully.
- @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth SDP information.
+ @retval EFI_SUCCESS The Bluetooth device information is returned successfully.
+ @retval EFI_DEVICE_ERROR A hardware error occurred trying to retrieve the Bluetooth SDP information.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_GET_SDP_INFO)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- OUT UINTN *SdpInfoSize,
- OUT VOID **SdpInfo
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ OUT UINTN *SdpInfoSize,
+ OUT VOID **SdpInfo
);
-
+
/**
Send L2CAP message (including L2CAP header).
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
- On output, indicates the amount of data actually transferred.
- @param Buffer A pointer to the buffer of data that will be transmitted to Bluetooth L2CAP layer.
- @param Timeout Indicating the transfer should be completed within this time frame. The units are in
- milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
- until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in, out] BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
+ On output, indicates the amount of data actually transferred.
+ @param[in] Buffer A pointer to the buffer of data that will be transmitted to Bluetooth L2CAP layer.
+ @param[in] Timeout Indicating the transfer should be completed within this time frame. The units are in
+ milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
+ until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@retval EFI_SUCCESS The L2CAP message is sent successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
@@ -127,25 +127,25 @@ EFI_STATUS
@retval EFI_DEVICE_ERROR Sending L2CAP message fail due to host controller or device error.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_RAW_SEND)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- IN OUT UINTN *BufferSize,
- IN VOID *Buffer,
- IN UINTN Timeout
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer,
+ IN UINTN Timeout
);
-
+
/**
Receive L2CAP message (including L2CAP header).
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
- On output, indicates the amount of data actually transferred.
- @param Buffer A pointer to the buffer of data that will be received from Bluetooth L2CAP layer.
- @param Timeout Indicating the transfer should be completed within this time frame. The units are in
- milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
- until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
+ On output, indicates the amount of data actually transferred.
+ @param[out] Buffer A pointer to the buffer of data that will be received from Bluetooth L2CAP layer.
+ @param[in] Timeout Indicating the transfer should be completed within this time frame. The units are in
+ milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
+ until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@retval EFI_SUCCESS The L2CAP message is received successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
@@ -156,7 +156,7 @@ EFI_STATUS
@retval EFI_DEVICE_ERROR Receiving L2CAP message fail due to host controller or device error.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_RAW_RECEIVE)(
IN EFI_BLUETOOTH_IO_PROTOCOL *This,
@@ -164,16 +164,16 @@ EFI_STATUS
OUT VOID *Buffer,
IN UINTN Timeout
);
-
+
/**
Callback function, it is called when asynchronous transfer is completed.
- @param ChannelID Bluetooth L2CAP message channel ID.
- @param Data Data received via asynchronous transfer.
- @param DataLength The length of Data in bytes, received via asynchronous transfer.
- @param Context Context passed from asynchronous transfer request.
+ @param[in] ChannelID Bluetooth L2CAP message channel ID.
+ @param[in] Data Data received via asynchronous transfer.
+ @param[in] DataLength The length of Data in bytes, received via asynchronous transfer.
+ @param[in] Context Context passed from asynchronous transfer request.
- @retval EFI_SUCCESS The callback function complete successfully.
+ @retval EFI_SUCCESS The callback function complete successfully.
**/
typedef
@@ -184,25 +184,25 @@ EFI_STATUS
IN UINTN DataLength,
IN VOID *Context
);
-
+
/**
Receive L2CAP message (including L2CAP header) in non-blocking way.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param IsNewTransfer If TRUE, a new transfer will be submitted. If FALSE, the request is deleted.
- @param PollingInterval Indicates the periodic rate, in milliseconds, that the transfer is to be executed.
- @param DataLength Specifies the length, in bytes, of the data to be received.
- @param Callback The callback function. This function is called if the asynchronous transfer is
- completed.
- @param Context Data passed into Callback function. This is optional parameter and may be NULL.
-
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] IsNewTransfer If TRUE, a new transfer will be submitted. If FALSE, the request is deleted.
+ @param[in] PollingInterval Indicates the periodic rate, in milliseconds, that the transfer is to be executed.
+ @param[in] DataLength Specifies the length, in bytes, of the data to be received.
+ @param[in] Callback The callback function. This function is called if the asynchronous transfer is
+ completed.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
@retval EFI_SUCCESS The L2CAP asynchronous receive request is submitted successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- DataLength is 0.
- If IsNewTransfer is TRUE, and an asynchronous receive request already exists.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_RAW_ASYNC_RECEIVE)(
IN EFI_BLUETOOTH_IO_PROTOCOL *This,
@@ -216,14 +216,14 @@ EFI_STATUS
/**
Send L2CAP message (excluding L2CAP header) to a specific channel.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handle A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel to send.
- @param BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
- On output, indicates the amount of data actually transferred.
- @param Buffer A pointer to the buffer of data that will be transmitted to Bluetooth L2CAP layer.
- @param Timeout Indicating the transfer should be completed within this time frame. The units are in
- milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
- until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] Handle A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel to send.
+ @param[in, out] BufferSize On input, indicates the size, in bytes, of the data buffer specified by Buffer.
+ On output, indicates the amount of data actually transferred.
+ @param[in] Buffer A pointer to the buffer of data that will be transmitted to Bluetooth L2CAP layer.
+ @param[in] Timeout Indicating the transfer should be completed within this time frame. The units are in
+ milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
+ until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@retval EFI_SUCCESS The L2CAP message is sent successfully.
@retval EFI_NOT_FOUND Handle is invalid or not found.
@@ -235,26 +235,26 @@ EFI_STATUS
@retval EFI_DEVICE_ERROR Sending L2CAP message fail due to host controller or device error.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_SEND)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- IN OUT UINTN *BufferSize,
- IN VOID *Buffer,
- IN UINTN Timeout
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ IN OUT UINTN *BufferSize,
+ IN VOID *Buffer,
+ IN UINTN Timeout
);
-
+
/**
Receive L2CAP message (excluding L2CAP header) from a specific channel.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handle A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel to receive.
- @param BufferSize Indicates the size, in bytes, of the data buffer specified by Buffer.
- @param Buffer A pointer to the buffer of data that will be received from Bluetooth L2CAP layer.
- @param Timeout Indicating the transfer should be completed within this time frame. The units are in
- milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
- until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] Handle A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel to receive.
+ @param[out] BufferSize Indicates the size, in bytes, of the data buffer specified by Buffer.
+ @param[out] Buffer A pointer to the buffer of data that will be received from Bluetooth L2CAP layer.
+ @param[in] Timeout Indicating the transfer should be completed within this time frame. The units are in
+ milliseconds. If Timeout is 0, then the caller must wait for the function to be completed
+ until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.
@retval EFI_SUCCESS The L2CAP message is received successfully.
@retval EFI_NOT_FOUND Handle is invalid or not found.
@@ -266,22 +266,22 @@ EFI_STATUS
@retval EFI_DEVICE_ERROR Receiving L2CAP message fail due to host controller or device error.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_RECEIVE)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- OUT UINTN *BufferSize,
- OUT VOID **Buffer,
- IN UINTN Timeout
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ OUT UINTN *BufferSize,
+ OUT VOID **Buffer,
+ IN UINTN Timeout
);
-
+
/**
Callback function, it is called when asynchronous transfer is completed.
- @param Data Data received via asynchronous transfer.
- @param DataLength The length of Data in bytes, received via asynchronous transfer.
- @param Context Context passed from asynchronous transfer request.
+ @param[in] Data Data received via asynchronous transfer.
+ @param[in] DataLength The length of Data in bytes, received via asynchronous transfer.
+ @param[in] Context Context passed from asynchronous transfer request.
@retval EFI_SUCCESS The callback function complete successfully.
@@ -289,20 +289,21 @@ EFI_STATUS
typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_CHANNEL_SERVICE_CALLBACK) (
- IN VOID *Data,
- IN UINTN DataLength,
- IN VOID *Context
+ IN VOID *Data,
+ IN UINTN DataLength,
+ IN VOID *Context
);
-
+
/**
Receive L2CAP message (excluding L2CAP header) in non-blocking way from a specific channel.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handel A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel to receive.
- @param Callback The callback function. This function is called if the asynchronous transfer is
- completed.
- @param Context Data passed into Callback function. This is optional parameter and may be NULL.
-
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] Handel A handle created by EFI_BLUETOOTH_IO_PROTOCOL.L2CapConnect indicates which channel
+ to receive.
+ @param[in] Callback The callback function. This function is called if the asynchronous transfer is
+ completed.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
@retval EFI_SUCCESS The L2CAP asynchronous receive request is submitted successfully.
@retval EFI_NOT_FOUND Handle is invalid or not found.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
@@ -310,33 +311,33 @@ EFI_STATUS
- If an asynchronous receive request already exists on same Handle.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_ASYNC_RECEIVE)(
- IN EFI_BLUETOOTH_IO_PROTOCOL *This,
- IN EFI_HANDLE Handle,
- IN EFI_BLUETOOTH_IO_CHANNEL_SERVICE_CALLBACK Callback,
- IN VOID *Context
+ IN EFI_BLUETOOTH_IO_PROTOCOL *This,
+ IN EFI_HANDLE Handle,
+ IN EFI_BLUETOOTH_IO_CHANNEL_SERVICE_CALLBACK Callback,
+ IN VOID* Context
);
-
+
/**
Do L2CAP connection.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handel A handle to indicate this L2CAP connection.
- @param Psm Bluetooth PSM. See Bluetooth specification for detail.
- @param Mtu Bluetooth MTU. See Bluetooth specification for detail.
- @param Callback The callback function. This function is called whenever there is message received
- in this channel.
- @param Context Data passed into Callback function. This is optional parameter and may be NULL.
-
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[out] Handel A handle to indicate this L2CAP connection.
+ @param[in] Psm Bluetooth PSM. See Bluetooth specification for detail.
+ @param[in] Mtu Bluetooth MTU. See Bluetooth specification for detail.
+ @param[in] Callback The callback function. This function is called whenever there is message received
+ in this channel.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
@retval EFI_SUCCESS The Bluetooth L2CAP layer connection is created successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
- Handle is NULL.
@retval EFI_DEVICE_ERROR A hardware error occurred trying to do Bluetooth L2CAP connection.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_CONNECT)(
IN EFI_BLUETOOTH_IO_PROTOCOL *This,
@@ -346,42 +347,42 @@ EFI_STATUS
IN EFI_BLUETOOTH_IO_CHANNEL_SERVICE_CALLBACK Callback,
IN VOID *Context
);
-
+
/**
Do L2CAP disconnection.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handel A handle to indicate this L2CAP connection.
-
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[in] Handel A handle to indicate this L2CAP connection.
+
@retval EFI_SUCCESS The Bluetooth L2CAP layer is disconnected successfully.
@retval EFI_NOT_FOUND Handle is invalid or not found.
@retval EFI_DEVICE_ERROR A hardware error occurred trying to do Bluetooth L2CAP disconnection.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_DISCONNECT)(
IN EFI_BLUETOOTH_IO_PROTOCOL *This,
IN EFI_HANDLE Handle
);
-
+
/**
Register L2CAP callback function for special channel.
- @param This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
- @param Handel A handle to indicate this L2CAP connection.
- @param Psm Bluetooth PSM. See Bluetooth specification for detail.
- @param Mtu Bluetooth MTU. See Bluetooth specification for detail.
- @param Callback The callback function. This function is called whenever there is message received
- in this channel. NULL means unregister.
- @param Context Data passed into Callback function. This is optional parameter and may be NULL.
-
+ @param[in] This Pointer to the EFI_BLUETOOTH_IO_PROTOCOL instance.
+ @param[out] Handel A handle to indicate this L2CAP connection.
+ @param[in] Psm Bluetooth PSM. See Bluetooth specification for detail.
+ @param[in] Mtu Bluetooth MTU. See Bluetooth specification for detail.
+ @param[in] Callback The callback function. This function is called whenever there is message received
+ in this channel. NULL means unregister.
+ @param[in] Context Data passed into Callback function. This is optional parameter and may be NULL.
+
@retval EFI_SUCCESS The Bluetooth L2CAP callback function is registered successfully.
@retval EFI_ALREADY_STARTED The callback function already exists when register.
@retval EFI_NOT_FOUND The callback function does not exist when unregister.
**/
-typedef
+typedef
EFI_STATUS
(EFIAPI *EFI_BLUETOOTH_IO_L2CAP_REGISTER_SERVICE)(
IN EFI_BLUETOOTH_IO_PROTOCOL *This,
@@ -391,9 +392,9 @@ EFI_STATUS
IN EFI_BLUETOOTH_IO_CHANNEL_SERVICE_CALLBACK Callback,
IN VOID *Context
);
-
+
///
-/// This protocol provides service for Bluetooth L2CAP (Logical Link Control and Adaptation Protocol)
+/// This protocol provides service for Bluetooth L2CAP (Logical Link Control and Adaptation Protocol)
/// and SDP (Service Discovery Protocol).
///
struct _EFI_BLUETOOTH_IO_PROTOCOL {
--
2.12.2.windows.2
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.