From nobody Wed Dec 25 14:52:06 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1509447183811716.6608595826132; Tue, 31 Oct 2017 03:53:03 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 5EE3321F3B3ED; Tue, 31 Oct 2017 03:48:59 -0700 (PDT) Received: from mail-wm0-x22d.google.com (mail-wm0-x22d.google.com [IPv6:2a00:1450:400c:c09::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 3C0FA2034AB39 for ; Tue, 31 Oct 2017 03:48:58 -0700 (PDT) Received: by mail-wm0-x22d.google.com with SMTP id y83so22076377wmc.4 for ; Tue, 31 Oct 2017 03:52:49 -0700 (PDT) Received: from localhost.localdomain ([105.129.222.2]) by smtp.gmail.com with ESMTPSA id o14sm460985wra.54.2017.10.31.03.52.44 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 31 Oct 2017 03:52:45 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c09::22d; helo=mail-wm0-x22d.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=GzjhBVUd4XTvoe2tdr05v+yUMA4jhEqTOMH1QCdrjxw=; b=E1NkbhGH0wd1MZW9bOD4p8jvmwHqkUY2nzLmwAiaV9HTx8mnMcRHSIMWmPdgcM9R64 r93s7oXj4nWuuhZCf58ROeh3osxLfkcMGsORoWe+eIjAiTNeRAj47sqgw6jNvRD6lX2i yXRk/01McLvg3CfnUSYhUZVPZPNb1ADMkgeeM= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=GzjhBVUd4XTvoe2tdr05v+yUMA4jhEqTOMH1QCdrjxw=; b=NH9WgKYwm78DcnpECBFqq0o/qtQqN6PH4MahoHG47hdDpMhDPELUQnDyguXIz0orge niEgRVf14JGwg8VOmReklkgeSWLzbBn679Vm7J13gPR7AJ+exuQcKxUbJQ/trn49wTSR xVv5N6O2ZjuVrhsyd5kft5kZnxAWCRJwB37L2TrYh319ztdLb6rdrJNEnSy1oQ0ubwSI qYwWLTwpDn/RglYpdJ2sDAbBazjhqToCHpQ3PE+eOSLoic2j/JZ6QYADc0wYtHhXS73M oGYtgLmWHrARjAOckvYIhOpp9lx0jSJXCkefLJl0jw9AzAhyvF0fciuIlUvfjcte8x4H bqiQ== X-Gm-Message-State: AMCzsaV9gg5s1lKvuAW8PtQzxYFi/0gbmxu+n/zqL+TLf8TPJFmx9u5G GwKlifeUorJ9pEIvaTxcn/E4SEILNDk= X-Google-Smtp-Source: ABhQp+RlEys4Xr0Ith8wQQQ89XM8qx/hHzrPxBGfYJ8Y49HQ47paZW1dnN9SnFYxVmAVie9SHGMPUg== X-Received: by 10.28.26.138 with SMTP id a132mr1546535wma.124.1509447166523; Tue, 31 Oct 2017 03:52:46 -0700 (PDT) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org Date: Tue, 31 Oct 2017 10:51:58 +0000 Message-Id: <20171031105218.30208-8-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171031105218.30208-1-ard.biesheuvel@linaro.org> References: <20171031105218.30208-1-ard.biesheuvel@linaro.org> Subject: [edk2] [PATCH edk2-platforms v3 07/27] Silicon/SynQuacer: implement PciSegmentLib to support dual RCs X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: daniel.thompson@linaro.org, masami.hiramatsu@linaro.org, Ard Biesheuvel MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" Having two distinct root complexes is not supported by the standard set of PciLib/PciExpressLib/PciSegmentLib, so let's reimplement one of the latter specifically for this platform (and forget about the others). This also allows us to implement the Synopsys Designware PCIe specific workaround for PCI config space accesses to devices 1 and up on bus 0. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegmentLib.c= | 1398 ++++++++++++++++++++ Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerPciSeg= mentLib.inf | 35 + 2 files changed, 1433 insertions(+) diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/Pci= SegmentLib.c b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/P= ciSegmentLib.c new file mode 100644 index 000000000000..62f3b2015d2b --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/PciSegment= Lib.c @@ -0,0 +1,1398 @@ +/** @file + PCI Segment Library for SynQuacer SoC with multiple RCs + + Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.
+ Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ + This program and the accompanying materials are + licensed and made available under the terms and conditions of + the BSD License which accompanies this distribution. The full + text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include + +#include +#include +#include +#include + +#include + +typedef enum { + PciCfgWidthUint8 =3D 0, + PciCfgWidthUint16, + PciCfgWidthUint32, + PciCfgWidthMax +} PCI_CFG_WIDTH; + +/** + Assert the validity of a PCI Segment address. + A valid PCI Segment address should not contain 1's in bits 28..31 and 48= ..63 + + @param A The address to validate. + @param M Additional bits to assert to be zero. + +**/ +#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \ + ASSERT (((A) & (0xffff0000f0000000ULL | (M))) =3D=3D 0) + +STATIC +UINT64 +PciSegmentLibGetConfigBase ( + IN UINT64 Address + ) +{ + switch ((UINT16)(Address >> 32)) { + case 0: + return SYNQUACER_PCI_SEG0_CONFIG_BASE; + case 1: + return SYNQUACER_PCI_SEG1_CONFIG_BASE; + default: + ASSERT (FALSE); + } + + return 0; +} + +/** + Internal worker function to read a PCI configuration register. + + @param Address The address that encodes the PCI Bus, Device, Function a= nd + Register. + @param Width The width of data to read + + @return The value read from the PCI configuration register. + +**/ +STATIC +UINT32 +PciSegmentLibReadWorker ( + IN UINT64 Address, + IN PCI_CFG_WIDTH Width + ) +{ + UINT64 Base; + + Base =3D PciSegmentLibGetConfigBase (Address); + + // ignore devices > 0 on bus 0 + if ((Address & 0xff00000) =3D=3D 0 && (Address & 0xf8000) !=3D 0) { + return 0xffffffff; + } + + switch (Width) { + case PciCfgWidthUint8: + return MmioRead8 (Base + (UINT32)Address); + case PciCfgWidthUint16: + return MmioRead16 (Base + (UINT32)Address); + case PciCfgWidthUint32: + return MmioRead32 (Base + (UINT32)Address); + default: + ASSERT (FALSE); + } + + return 0; +} + +/** + Internal worker function to writes a PCI configuration register. + + @param Address The address that encodes the PCI Bus, Device, Function a= nd + Register. + @param Width The width of data to write + @param Data The value to write. + + @return The value written to the PCI configuration register. + +**/ +STATIC +UINT32 +PciSegmentLibWriteWorker ( + IN UINT64 Address, + IN PCI_CFG_WIDTH Width, + IN UINT32 Data + ) +{ + UINT64 Base; + + Base =3D PciSegmentLibGetConfigBase (Address); + + // ignore devices > 0 on bus 0 + if ((Address & 0xff00000) =3D=3D 0 && (Address & 0xf8000) !=3D 0) { + return Data; + } + + switch (Width) { + case PciCfgWidthUint8: + MmioWrite8 (Base + (UINT32)Address, Data); + break; + case PciCfgWidthUint16: + MmioWrite16 (Base + (UINT32)Address, Data); + break; + case PciCfgWidthUint32: + MmioWrite32 (Base + (UINT32)Address, Data); + break; + default: + ASSERT (FALSE); + } + + return Data; +} + +/** + Register a PCI device so PCI configuration registers may be accessed aft= er + SetVirtualAddressMap(). + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function a= nd + Register. + + @retval RETURN_SUCCESS The PCI device was registered for runti= me access. + @retval RETURN_UNSUPPORTED An attempt was made to call this functi= on + after ExitBootServices(). + @retval RETURN_UNSUPPORTED The resources required to access the PC= I device + at runtime could not be mapped. + @retval RETURN_OUT_OF_RESOURCES There are not enough resources availabl= e to + complete the registration. + +**/ +RETURN_STATUS +EFIAPI +PciSegmentRegisterForRuntimeAccess ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + return RETURN_UNSUPPORTED; +} + +/** + Reads an 8-bit PCI configuration register. + + Reads and returns the 8-bit PCI configuration register specified by Addr= ess. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, + and Register. + + @return The 8-bit PCI configuration register specified by Address. + +**/ +UINT8 +EFIAPI +PciSegmentRead8 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8); +} + +/** + Writes an 8-bit PCI configuration register. + + Writes the 8-bit PCI configuration register specified by Address with th= e value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Devic= e, Function, and Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentWrite8 ( + IN UINT64 Address, + IN UINT8 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0); + + return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Valu= e); +} + +/** + Performs a bitwise OR of an 8-bit PCI configuration register with an 8-b= it value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentOr8 ( + IN UINT64 Address, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) | O= rData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-= bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAnd8 ( + IN UINT64 Address, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) (PciSegmentRead8 (Address) & A= ndData)); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-= bit value, + followed a bitwise OR with another 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 8-bit PCI configuration register specified = by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentAndThenOr8 ( + IN UINT64 Address, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 (Address, (UINT8) ((PciSegmentRead8 (Address) & = AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in an 8-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldRead8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead8 (PciSegmentRead8 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 8-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldWrite8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldWrite8 (PciSegmentRead8 (Address), StartBit, EndBit, Va= lue) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, = and + writes the result back to the bit field in the 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldOr8 (PciSegmentRead8 (Address), StartBit, EndBit, OrDat= a) + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration register, performs a bit= wise + AND, and writes the result back to the bit field in the 8-bit register. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise AND between the read result and the value specified by AndData, = and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAnd8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAnd8 (PciSegmentRead8 (Address), StartBit, EndBit, AndD= ata) + ); +} + +/** + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, perform= s a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciSegmentBitFieldAndThenOr8 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + return PciSegmentWrite8 ( + Address, + BitFieldAndThenOr8 (PciSegmentRead8 (Address), StartBit, EndBit= , AndData, OrData) + ); +} + +/** + Reads a 16-bit PCI configuration register. + + Reads and returns the 16-bit PCI configuration register specified by Add= ress. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + + @return The 16-bit PCI configuration register specified by Address. + +**/ +UINT16 +EFIAPI +PciSegmentRead16 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16); +} + +/** + Writes a 16-bit PCI configuration register. + + Writes the 16-bit PCI configuration register specified by Address with t= he value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Devic= e, Function, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT16 +EFIAPI +PciSegmentWrite16 ( + IN UINT64 Address, + IN UINT16 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1); + + return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Va= lue); +} + +/** + Performs a bitwise OR of a 16-bit PCI configuration register with + a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device, F= unction and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentOr16 ( + IN UINT64 Address, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) = | OrData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-= bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAnd16 ( + IN UINT64 Address, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) (PciSegmentRead16 (Address) = & AndData)); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-= bit value, + followed a bitwise OR with another 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentAndThenOr16 ( + IN UINT64 Address, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 (Address, (UINT16) ((PciSegmentRead16 (Address)= & AndData) | OrData)); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 16-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldRead16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead16 (PciSegmentRead16 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 16-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldWrite16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldWrite16 (PciSegmentRead16 (Address), StartBit, EndBit, = Value) + ); +} + +/** + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldOr16 (PciSegmentRead16 (Address), StartBit, EndBit, OrD= ata) + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, + and writes the result back to the bit field in the 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 16-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + The ordinal of the least significant bit in a byte is = bit 0. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + The ordinal of the most significant bit in a byte is b= it 7. + @param AndData The value to AND with the read value from the PCI conf= iguration register. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAnd16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAnd16 (PciSegmentRead16 (Address), StartBit, EndBit, An= dData) + ); +} + +/** + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, perfor= ms a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciSegmentBitFieldAndThenOr16 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + return PciSegmentWrite16 ( + Address, + BitFieldAndThenOr16 (PciSegmentRead16 (Address), StartBit, EndB= it, AndData, OrData) + ); +} + +/** + Reads a 32-bit PCI configuration register. + + Reads and returns the 32-bit PCI configuration register specified by Add= ress. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, + and Register. + + @return The 32-bit PCI configuration register specified by Address. + +**/ +UINT32 +EFIAPI +PciSegmentRead32 ( + IN UINT64 Address + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciSegmentLibReadWorker (Address, PciCfgWidthUint32); +} + +/** + Writes a 32-bit PCI configuration register. + + Writes the 32-bit PCI configuration register specified by Address with t= he value specified by Value. + Value is returned. This function must guarantee that all PCI read and w= rite operations are serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Devic= e, + Function, and Register. + @param Value The value to write. + + @return The parameter of Value. + +**/ +UINT32 +EFIAPI +PciSegmentWrite32 ( + IN UINT64 Address, + IN UINT32 Value + ) +{ + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3); + + return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value); +} + +/** + Performs a bitwise OR of a 32-bit PCI configuration register with a 32-b= it value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise OR between the read result and the value specified by= OrData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, and Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentOr32 ( + IN UINT64 Address, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) | OrData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-= bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, + and Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAnd32 ( + IN UINT64 Address, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 (Address, PciSegmentRead32 (Address) & AndData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-= bit value, + followed a bitwise OR with another 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, + performs a bitwise AND between the read result and the value specified b= y AndData, + performs a bitwise OR between the result of the AND operation and the va= lue specified by OrData, + and writes the result to the 32-bit PCI configuration register specified= by Address. + The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are = serialized. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Segment, Bus, Device,= Function, + and Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentAndThenOr32 ( + IN UINT64 Address, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 (Address, (PciSegmentRead32 (Address) & AndData= ) | OrData); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 32-bit PCI configuration register. The bit fiel= d is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + + @return The value of the bit field read from the PCI configuration regis= ter. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldRead32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + return BitFieldRead32 (PciSegmentRead32 (Address), StartBit, EndBit); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of t= he + 32-bit register is returned. + + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit an= d EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldWrite32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldWrite32 (PciSegmentRead32 (Address), StartBit, EndBit, = Value) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, = and + writes the result back to the bit field in the 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration registe= r is + returned. This function must guarantee that all PCI read and write opera= tions + are serialized. Extra left bits in OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldOr32 (PciSegmentRead32 (Address), StartBit, EndBit, OrD= ata) + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration register, performs a bit= wise + AND, and writes the result back to the bit field in the 32-bit register. + + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a bitwise + AND between the read result and the value specified by AndData, and writ= es the result + to the 32-bit PCI configuration register specified by Address. The value= written to + the PCI configuration register is returned. This function must guarante= e that all PCI + read and write operations are serialized. Extra left bits in AndData ar= e stripped. + If any reserved bits in Address are set, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAnd32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAnd32 (PciSegmentRead32 (Address), StartBit, EndBit, An= dData) + ); +} + +/** + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, perfor= ms a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that al= l PCI + read and write operations are serialized. Extra left bits in both AndDat= a and + OrData are stripped. + + If any reserved bits in Address are set, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit = and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit a= nd EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit fi= eld. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit fie= ld. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciSegmentBitFieldAndThenOr32 ( + IN UINT64 Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + return PciSegmentWrite32 ( + Address, + BitFieldAndThenOr32 (PciSegmentRead32 (Address), StartBit, EndB= it, AndData, OrData) + ); +} + +/** + Reads a range of PCI configuration registers into a caller supplied buff= er. + + Reads the range of PCI configuration registers specified by StartAddress= and + Size into the buffer specified by Buffer. This function only allows the = PCI + configuration registers from a single PCI function to be read. Size is + returned. When possible 32-bit PCI configuration read cycles are used to= read + from StartAdress to StartAddress + Size. Due to alignment restrictions, = 8-bit + and 16-bit PCI configuration read cycles may be used at the beginning an= d the + end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Segment,= Bus, + Device, Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer receiving the data read. + + @return Size + +**/ +UINTN +EFIAPI +PciSegmentReadBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + OUT VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <=3D 0x1000); + + if (Size =3D=3D 0) { + return Size; + } + + ASSERT (Buffer !=3D NULL); + + // + // Save Size for return + // + ReturnValue =3D Size; + + if ((StartAddress & BIT0) !=3D 0) { + // + // Read a byte if StartAddress is byte aligned + // + *(volatile UINT8 *)Buffer =3D PciSegmentRead8 (StartAddress); + StartAddress +=3D sizeof (UINT8); + Size -=3D sizeof (UINT8); + Buffer =3D (UINT8*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT16) && (StartAddress & BIT1) !=3D 0) { + // + // Read a word if StartAddress is word aligned + // + WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress)); + StartAddress +=3D sizeof (UINT16); + Size -=3D sizeof (UINT16); + Buffer =3D (UINT16*)Buffer + 1; + } + + while (Size >=3D sizeof (UINT32)) { + // + // Read as many double words as possible + // + WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress)); + StartAddress +=3D sizeof (UINT32); + Size -=3D sizeof (UINT32); + Buffer =3D (UINT32*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT16)) { + // + // Read the last remaining word if exist + // + WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress)); + StartAddress +=3D sizeof (UINT16); + Size -=3D sizeof (UINT16); + Buffer =3D (UINT16*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT8)) { + // + // Read the last remaining byte if exist + // + *(volatile UINT8 *)Buffer =3D PciSegmentRead8 (StartAddress); + } + + return ReturnValue; +} + + +/** + Copies the data in a caller supplied buffer to a specified range of PCI + configuration space. + + Writes the range of PCI configuration registers specified by StartAddres= s and + Size from the buffer specified by Buffer. This function only allows the = PCI + configuration registers from a single PCI function to be written. Size is + returned. When possible 32-bit PCI configuration write cycles are used to + write from StartAdress to StartAddress + Size. Due to alignment restrict= ions, + 8-bit and 16-bit PCI configuration write cycles may be used at the begin= ning + and the end of the range. + + If any reserved bits in StartAddress are set, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Segment,= Bus, + Device, Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer containing the data to wri= te. + + @return The parameter of Size. + +**/ +UINTN +EFIAPI +PciSegmentWriteBuffer ( + IN UINT64 StartAddress, + IN UINTN Size, + IN VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0); + ASSERT (((StartAddress & 0xFFF) + Size) <=3D 0x1000); + + if (Size =3D=3D 0) { + return 0; + } + + ASSERT (Buffer !=3D NULL); + + // + // Save Size for return + // + ReturnValue =3D Size; + + if ((StartAddress & BIT0) !=3D 0) { + // + // Write a byte if StartAddress is byte aligned + // + PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer); + StartAddress +=3D sizeof (UINT8); + Size -=3D sizeof (UINT8); + Buffer =3D (UINT8*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT16) && (StartAddress & BIT1) !=3D 0) { + // + // Write a word if StartAddress is word aligned + // + PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer)); + StartAddress +=3D sizeof (UINT16); + Size -=3D sizeof (UINT16); + Buffer =3D (UINT16*)Buffer + 1; + } + + while (Size >=3D sizeof (UINT32)) { + // + // Write as many double words as possible + // + PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer)); + StartAddress +=3D sizeof (UINT32); + Size -=3D sizeof (UINT32); + Buffer =3D (UINT32*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT16)) { + // + // Write the last remaining word if exist + // + PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer)); + StartAddress +=3D sizeof (UINT16); + Size -=3D sizeof (UINT16); + Buffer =3D (UINT16*)Buffer + 1; + } + + if (Size >=3D sizeof (UINT8)) { + // + // Write the last remaining byte if exist + // + PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer); + } + + return ReturnValue; +} diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/Syn= QuacerPciSegmentLib.inf b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciS= egmentLib/SynQuacerPciSegmentLib.inf new file mode 100644 index 000000000000..27bfb4eb6f12 --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerPciSegmentLib/SynQuacerP= ciSegmentLib.inf @@ -0,0 +1,35 @@ +## @file +# PCI Segment Library for SynQuacer SoC with multiple RCs +# +# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.
+# Copyright (c) 2017, Linaro Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the B= SD License +# which accompanies this distribution. The full text of the license may b= e found at +# http://opensource.org/licenses/bsd-license.php. +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +# +# +## + +[Defines] + INF_VERSION =3D 0x00010019 + BASE_NAME =3D SynQuacerPciSegmentLib + FILE_GUID =3D 1299f005-a30b-47d3-9003-24a91f100840 + MODULE_TYPE =3D BASE + VERSION_STRING =3D 1.0 + LIBRARY_CLASS =3D PciSegmentLib + +[Sources] + PciSegmentLib.c + +[Packages] + MdePkg/MdePkg.dec + Silicon/Socionext/SynQuacer/SynQuacer.dec + +[LibraryClasses] + BaseLib + DebugLib + IoLib --=20 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel