From nobody Wed Dec 25 02:40:34 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1509704232002200.2682741585835; Fri, 3 Nov 2017 03:17:12 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id C6FD7203555E4; Fri, 3 Nov 2017 03:13:15 -0700 (PDT) Received: from mail-wm0-x243.google.com (mail-wm0-x243.google.com [IPv6:2a00:1450:400c:c09::243]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 21FD5203555E2 for ; Fri, 3 Nov 2017 03:13:14 -0700 (PDT) Received: by mail-wm0-x243.google.com with SMTP id r68so442025wmr.1 for ; Fri, 03 Nov 2017 03:17:09 -0700 (PDT) Received: from localhost.localdomain ([105.129.222.2]) by smtp.gmail.com with ESMTPSA id w18sm5331408wra.30.2017.11.03.03.17.05 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 03 Nov 2017 03:17:06 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c09::243; helo=mail-wm0-x243.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=j6ESdt+BQheV32yG8V5iznhp2Re+GQCIEUNmRwNm3Xg=; b=Qo+Ul26HErJSeepQf+n1QXA5sgx/ZvtoT0JIIJoPUa7oL/f1fSN/3f89kAQbtmJlvy EzdymVeNiAl3fo+f0pnXKDW14Fu32i90uUXNKmcnrip5A4cS6gm3Jg1oYQJI6d0i7s0j U7kq5E4QRSQY+f8+x1hqUoVj8DLglzIWuPsSs= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=j6ESdt+BQheV32yG8V5iznhp2Re+GQCIEUNmRwNm3Xg=; b=pWpR7CsPdqyZzz5tR6niYZK+U9FFVUkBUZmlKpgJvkj0+/yHPVsEtblqg/27+VkeZC EBWAGxK60ZeaOii89J8ewqvxbl4r6vMRAQS5x4sDvFa9aJR4uB4fTrbTAxw+Pl1psFaR HblMd37hQUZUhrFJ85woUUWuBbnIf8GGzzZk/z5BaLWQt6cXFBwtDzOzYOlNmPCxqK2f FHerLXnhM9tEndYa6SXqZftM8/LQ72JQmvr06LttVYYc0IO4WrkOfTGFhBgZgvdcz8Ts +ngifqFBBlutH2E/cS+EJyXEKb3RqVvRFBU2VRmVlO5pwfoI4W/PGODtf0cEIsCudkYe XfKg== X-Gm-Message-State: AMCzsaW6aPC8a8fKJLnaSwdRGtcy8ZamqGCCPgQn3ThlIjwsFMOkzZTz XyJggFQEWLlGO0zD43GR7R5d5Ew4sD4= X-Google-Smtp-Source: ABhQp+QyvPqEd5eZST465TOIcW7PMsESm4zMqVpyHl2/+wAE1BrSSkrlAaMNLeNgSF4+wwdFLSBTXQ== X-Received: by 10.28.224.87 with SMTP id x84mr3715497wmg.118.1509704227170; Fri, 03 Nov 2017 03:17:07 -0700 (PDT) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org, daniel.thompson@linaro.org Date: Fri, 3 Nov 2017 10:16:52 +0000 Message-Id: <20171103101654.30973-2-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171103101654.30973-1-ard.biesheuvel@linaro.org> References: <20171103101654.30973-1-ard.biesheuvel@linaro.org> Subject: [edk2] [RFC PATCH edk2-platforms 1/3] Silicon/NXP: add RTC support library for PCF8563 I2C IP X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ard Biesheuvel MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" Add a RealTimeClockLib implementation for the NXP PCF8563 as used on the Socionext Developer Box board. Note that the standard I2C protocol stack does not support runtime use, so this driver invokes the I2C master protocol directly. This requires support from the platform side as well, and so this driver will only attach to a I2C master that has the gPcf8563RealTimeClockLibI2cMasterProtolGuid protocol installed on its handle. It is up to the platform to ensure that the driver producing the I2C master protocol in question is runtime capable, and is not shared with the I2C protocol stack (i.e., it should not have the I2C Bus Configuration Management protocol installed as well). Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c | = 385 ++++++++++++++++++++ Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec | = 29 ++ Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.inf | = 52 +++ 3 files changed, 466 insertions(+) diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClo= ckLib.c b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockL= ib.c new file mode 100644 index 000000000000..fea65a225d7f --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.c @@ -0,0 +1,385 @@ +/** @file + + Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BS= D License + which accompanies this distribution. The full text of the license may b= e found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SLAVE_ADDRESS (FixedPcdGet8 (PcdI2cSlaveAddress)) +#define PCF8563_DATA_REG_OFFSET 0x2 + +#define PCF8563_SECONDS_MASK 0x7f +#define PCF8563_MINUTES_MASK 0x7f +#define PCF8563_HOURS_MASK 0x3f +#define PCF8563_DAYS_MASK 0x3f +#define PCF8563_WEEKDAYS_MASK 0x07 +#define PCF8563_MONTHS_MASK 0x1f +#define PCF8563_CENTURY_MASK 0x80 + +#define EPOCH_BASE 2000 + +STATIC EFI_HANDLE mI2cMasterHandle; +STATIC VOID *mDriverEventRegistration; +STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster; +STATIC EFI_EVENT mRtcVirtualAddrChangeEvent; + +typedef struct { + UINTN OperationCount; + EFI_I2C_OPERATION SetAddressOp; + EFI_I2C_OPERATION GetSetDateTimeOp; +} RTC_I2C_REQUEST; + +#pragma pack(1) +typedef struct { + UINT8 VL_seconds; + UINT8 Minutes; + UINT8 Hours; + UINT8 Days; + UINT8 Weekdays; + UINT8 Century_months; + UINT8 Years; +} RTC_DATETIME; +#pragma pack() + +/** + Returns the current time and date information, and the time-keeping + capabilities of the hardware platform. + + @param Time A pointer to storage to receive a snapshot= of + the current time. + @param Capabilities An optional pointer to a buffer to receive= the + real time clock device's capabilities. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER Time is NULL. + @retval EFI_DEVICE_ERROR The time could not be retrieved due to har= dware + error. + +**/ +EFI_STATUS +EFIAPI +LibGetTime ( + OUT EFI_TIME *Time, + OUT EFI_TIME_CAPABILITIES *Capabilities + ) +{ + RTC_I2C_REQUEST Op; + RTC_DATETIME DateTime; + EFI_STATUS Status; + UINT8 Reg; + + if (Time =3D=3D NULL) { + return EFI_INVALID_PARAMETER; + } + + if (mI2cMaster =3D=3D NULL) { + return EFI_DEVICE_ERROR; + } + + Reg =3D PCF8563_DATA_REG_OFFSET; + + Op.OperationCount =3D 2; + + Op.SetAddressOp.Flags =3D 0; + Op.SetAddressOp.LengthInBytes =3D 1; + Op.SetAddressOp.Buffer =3D &Reg; + + Op.GetSetDateTimeOp.Flags =3D I2C_FLAG_READ; + Op.GetSetDateTimeOp.LengthInBytes =3D sizeof (RTC_DATETIME); + Op.GetSetDateTimeOp.Buffer =3D (VOID *)&DateTime; + + Status =3D mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, + (VOID *)&Op, NULL, NULL); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + + Time->Second =3D BcdToDecimal8 (DateTime.VL_seconds & PCF8563_SECONDS_M= ASK); + Time->Minute =3D BcdToDecimal8 (DateTime.Minutes & PCF8563_MINUTES_MASK= ); + Time->Hour =3D BcdToDecimal8 (DateTime.Hours & PCF8563_HOURS_MASK); + Time->Day =3D BcdToDecimal8 (DateTime.Days & PCF8563_DAYS_MASK); + Time->Month =3D BcdToDecimal8 (DateTime.Century_months & PCF8563_MONTH= S_MASK); + Time->Year =3D BcdToDecimal8 (DateTime.Years) + EPOCH_BASE; + + if (DateTime.Century_months & PCF8563_CENTURY_MASK) { + Time->Year +=3D 100; + } + + Time->Daylight =3D EFI_TIME_ADJUST_DAYLIGHT; + Time->TimeZone =3D 0; /* UTC */ + + if (Capabilities !=3D NULL) { + Capabilities->Resolution =3D 1; + Capabilities->Accuracy =3D 0; + Capabilities->SetsToZero =3D TRUE; + } + return EFI_SUCCESS; +} + + +/** + Sets the current local time and date information. + + @param Time A pointer to the current time. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER A time field is out of range. + @retval EFI_DEVICE_ERROR The time could not be set due due to hardw= are + error. + +**/ +EFI_STATUS +EFIAPI +LibSetTime ( + IN EFI_TIME *Time + ) +{ + RTC_I2C_REQUEST Op; + RTC_DATETIME DateTime; + EFI_STATUS Status; + UINT8 Reg; + + if (mI2cMaster =3D=3D NULL) { + return EFI_DEVICE_ERROR; + } + + DateTime.VL_seconds =3D DecimalToBcd8 (Time->Second); + DateTime.Minutes =3D DecimalToBcd8 (Time->Minute); + DateTime.Hours =3D DecimalToBcd8 (Time->Hour); + DateTime.Days =3D DecimalToBcd8 (Time->Day); + DateTime.Century_months =3D DecimalToBcd8 (Time->Month); + DateTime.Years =3D DecimalToBcd8 (Time->Year % 100); + if (Time->Year >=3D EPOCH_BASE + 100) { + DateTime.Century_months |=3D PCF8563_CENTURY_MASK; + } + + Reg =3D PCF8563_DATA_REG_OFFSET; + + Op.OperationCount =3D 2; + + Op.SetAddressOp.Flags =3D 0; + Op.SetAddressOp.LengthInBytes =3D 1; + Op.SetAddressOp.Buffer =3D &Reg; + + Op.GetSetDateTimeOp.Flags =3D 0; + Op.GetSetDateTimeOp.LengthInBytes =3D sizeof (RTC_DATETIME); + Op.GetSetDateTimeOp.Buffer =3D (VOID *)&DateTime; + + Status =3D mI2cMaster->StartRequest (mI2cMaster, SLAVE_ADDRESS, + (VOID *)&Op, NULL, NULL); + if (EFI_ERROR (Status)) { + return EFI_DEVICE_ERROR; + } + return EFI_SUCCESS; +} + + +/** + Returns the current wakeup alarm clock setting. + + @param Enabled Indicates if the alarm is currently enable= d or + disabled. + @param Pending Indicates if the alarm signal is pending a= nd + requires acknowledgement. + @param Time The current alarm setting. + + @retval EFI_SUCCESS The alarm settings were returned. + @retval EFI_INVALID_PARAMETER Any parameter is NULL. + @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due= to a + hardware error. + +**/ +EFI_STATUS +EFIAPI +LibGetWakeupTime ( + OUT BOOLEAN *Enabled, + OUT BOOLEAN *Pending, + OUT EFI_TIME *Time + ) +{ + return EFI_UNSUPPORTED; +} + + +/** + Sets the system wakeup alarm clock time. + + @param Enabled Enable or disable the wakeup alarm. + @param Time If Enable is TRUE, the time to set the wak= eup + alarm for. + + @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm w= as + enabled. If Enable is FALSE, then the wake= up + alarm was disabled. + @retval EFI_INVALID_PARAMETER A time field is out of range. + @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a + hardware error. + @retval EFI_UNSUPPORTED A wakeup timer is not supported on this + platform. + +**/ +EFI_STATUS +EFIAPI +LibSetWakeupTime ( + IN BOOLEAN Enabled, + OUT EFI_TIME *Time + ) +{ + return EFI_UNSUPPORTED; +} + +STATIC +VOID +DriverRegistrationEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EFI_HANDLE Handle[2]; + UINTN BufferSize; + EFI_STATUS Status; + EFI_I2C_MASTER_PROTOCOL *I2cMaster; + UINTN BusFrequency; + + // + // Try to connect the newly registered driver to our handle. + // + do { + BufferSize =3D sizeof (EFI_HANDLE); + Status =3D gBS->LocateHandle (ByRegisterNotify, + &gEfiDriverBindingProtocolGuid, + mDriverEventRegistration, + &BufferSize, + Handle); + if (EFI_ERROR (Status)) { + if (Status !=3D EFI_NOT_FOUND) { + DEBUG ((DEBUG_WARN, "%a: gBS->LocateHandle () returned %r\n", + __FUNCTION__, Status)); + } + break; + } + + // + // Check if we can connect our handle to this driver. + // + Handle[1] =3D NULL; + Status =3D gBS->ConnectController (mI2cMasterHandle, Handle, NULL, FAL= SE); + if (EFI_ERROR (Status)) { + continue; + } + + DEBUG ((DEBUG_INFO, "%a: found I2C master!\n", __FUNCTION__)); + + gBS->CloseEvent (Event); + + Status =3D gBS->OpenProtocol (mI2cMasterHandle, &gEfiI2cMasterProtocol= Guid, + (VOID **)&I2cMaster, gImageHandle, NULL, + EFI_OPEN_PROTOCOL_EXCLUSIVE); + ASSERT_EFI_ERROR (Status); + + Status =3D I2cMaster->Reset (I2cMaster); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n", + __FUNCTION__, Status)); + break; + } + + BusFrequency =3D FixedPcdGet16 (PcdI2cBusFrequency); + Status =3D I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\= n", + __FUNCTION__, Status)); + break; + } + + mI2cMaster =3D I2cMaster; + break; + } while (TRUE); +} + +/** + Fixup internal data so that EFI can be call in virtual mode. + Call the passed in Child Notify event and convert any pointers in + lib to virtual mode. + + @param[in] Event The Event that is being processed + @param[in] Context Event Context +**/ +VOID +EFIAPI +LibRtcVirtualNotifyEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EfiConvertPointer (0x0, (VOID **)&mI2cMaster); +} + +/** + Library entry point + + @param ImageHandle Handle that identifies the loaded image. + @param SystemTable System Table for this image. + + @retval EFI_SUCCESS The operation completed successfully. + +**/ +EFI_STATUS +EFIAPI +LibRtcInitialize ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + UINTN BufferSize; + + // + // Find the handle that marks the controller + // that will provide the I2C master protocol. + // + BufferSize =3D sizeof (EFI_HANDLE); + Status =3D gBS->LocateHandle (ByProtocol, + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, NULL, + &BufferSize, &mI2cMasterHandle); + ASSERT_EFI_ERROR (Status); + + // + // Register a protocol registration notification callback on the driver + // binding protocol so we can attempt to connect our I2C master to it + // as soon as it appears. + // + EfiCreateProtocolNotifyEvent ( + &gEfiDriverBindingProtocolGuid, + TPL_CALLBACK, + DriverRegistrationEvent, + NULL, + &mDriverEventRegistration); + + // + // Register for the virtual address change event + // + Status =3D gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, + LibRtcVirtualNotifyEvent, NULL, + &gEfiEventVirtualAddressChangeGuid, + &mRtcVirtualAddrChangeEvent); + ASSERT_EFI_ERROR (Status); + + return EFI_SUCCESS; +} diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClo= ckLib.dec b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeCloc= kLib.dec new file mode 100644 index 000000000000..bc8fc60c0602 --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.d= ec @@ -0,0 +1,29 @@ +#/** @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the B= SD License +# which accompanies this distribution. The full text of the license may b= e found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +# +# +#**/ + +[Defines] + DEC_SPECIFICATION =3D 0x0001001A + PACKAGE_NAME =3D Pcf8563RealTimeClockLib + PACKAGE_GUID =3D 44d63668-c86b-446a-b303-f3a5176702aa + PACKAGE_VERSION =3D 0.1 + +[Guids] + gPcf8563RealTimeClockLibTokenSpaceGuid =3D { 0xaaf5b169, 0x93a0, 0x4d60,= { 0xba, 0xe4, 0x06, 0x07, 0x92, 0x8e, 0x63, 0xdd }} + +[Protocols] + gPcf8563RealTimeClockLibI2cMasterProtolGuid =3D { 0xa6af18ae, 0x3bd5, 0x= 4af9, { 0xbb, 0x6a, 0xdb, 0x85, 0x07, 0x62, 0x81, 0x38 }} + +[PcdsFixedAtBuild] + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress|0x51|UINT8|0x0= 0000001 + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency|400|UINT16|0x0= 0000002 diff --git a/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClo= ckLib.inf b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeCloc= kLib.inf new file mode 100644 index 000000000000..e1e001162144 --- /dev/null +++ b/Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.i= nf @@ -0,0 +1,52 @@ +#/** @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the B= SD License +# which accompanies this distribution. The full text of the license may b= e found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +# +# +#**/ + +[Defines] + INF_VERSION =3D 0x0001001A + BASE_NAME =3D Pcf8563RealTimeClockLib + FILE_GUID =3D 1e3d33f3-a671-4116-bd81-6b435296c1e0 + MODULE_TYPE =3D DXE_DRIVER + VERSION_STRING =3D 1.0 + LIBRARY_CLASS =3D RealTimeClockLib + +[Sources.common] + Pcf8563RealTimeClockLib.c + +[Packages] + MdePkg/MdePkg.dec + EmbeddedPkg/EmbeddedPkg.dec + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec + +[LibraryClasses] + BaseMemoryLib + DebugLib + IoLib + UefiBootServicesTableLib + UefiLib + UefiRuntimeLib + +[Guids] + gEfiEventVirtualAddressChangeGuid + +[Protocols] + gEfiDriverBindingProtocolGuid ## CONSUMES + gEfiI2cMasterProtocolGuid ## CONSUMES + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## CONSUMES + +[FixedPcd] + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cSlaveAddress + gPcf8563RealTimeClockLibTokenSpaceGuid.PcdI2cBusFrequency + +[Depex] + gPcf8563RealTimeClockLibI2cMasterProtolGuid --=20 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel From nobody Wed Dec 25 02:40:34 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1509704235324137.31782250399738; Fri, 3 Nov 2017 03:17:15 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 14F17203555E3; Fri, 3 Nov 2017 03:13:19 -0700 (PDT) Received: from mail-wm0-x22d.google.com (mail-wm0-x22d.google.com [IPv6:2a00:1450:400c:c09::22d]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id C3AE6203555E2 for ; Fri, 3 Nov 2017 03:13:16 -0700 (PDT) Received: by mail-wm0-x22d.google.com with SMTP id r68so929501wmr.0 for ; Fri, 03 Nov 2017 03:17:11 -0700 (PDT) Received: from localhost.localdomain ([105.129.222.2]) by smtp.gmail.com with ESMTPSA id w18sm5331408wra.30.2017.11.03.03.17.07 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 03 Nov 2017 03:17:08 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c09::22d; helo=mail-wm0-x22d.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=bBG9QC1FfJn/VCSBR3YMuAT9jWABFKoy4wdBoGMwHSU=; b=KYT5E9Mzi+o79PF2rHuVtxg/S39Tdzh8msad9blcIM8G/Cq6w3snlWZGtqIvET5KwF e3Z1RZNYmsu60pRAAvCiybwnj6Ws4h6W+CaLbMwKc9aUmAIsKpFOnzhHEfc4SIX7x0ZV RPOXP3oHaqT+KaBWo+dLile8xOvHuY1L6dafc= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=bBG9QC1FfJn/VCSBR3YMuAT9jWABFKoy4wdBoGMwHSU=; b=AWbpwHCbObDZ0vrt/J8X3CnvX6fflP0I0StBy2q5uDu2A75Ye6p/cqlv7TkCKe1yT4 0YnXspAa21/eK0EUgPajTHGkdqDu8WvUPDEv2zNsRR7iabDByICSFSHW+dsXZTcT/UCY tyQSXMwhv4snVgQlms8ubgtM9Pq5jxRYeWUrtxFLq4cp/SXqGg2wDZtVGKN9KP7Md0ZN oGgzyGcdbuY5EUW++onmMr1DX+C9r87YfI8n1krsbTig2zbMN78fX0Sf+7eQm8oF2HQm +jGyNh8FbNMgMMVmnQRtocA2eoYUIOAYKMV+hFdH+axPI+woDinn3ShR8M1dmxhz7lUX 34Wg== X-Gm-Message-State: AMCzsaXZvscKMUfz6rBF3MMjqtR9K7zhtmIaUKNpEEyuUeqkycbFrYzz eGPNxY/gXd6R7JznJ7jdaPeLmj8Ycng= X-Google-Smtp-Source: ABhQp+TBXuqkSh31tWPYuF/AViCUOk/hAcBUPcazLMf+hHfsB3ToEZ8VpCBqPUU+RQBe80DxJBQ18g== X-Received: by 10.28.8.212 with SMTP id 203mr3842966wmi.43.1509704229309; Fri, 03 Nov 2017 03:17:09 -0700 (PDT) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org, daniel.thompson@linaro.org Date: Fri, 3 Nov 2017 10:16:53 +0000 Message-Id: <20171103101654.30973-3-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171103101654.30973-1-ard.biesheuvel@linaro.org> References: <20171103101654.30973-1-ard.biesheuvel@linaro.org> Subject: [edk2] [RFC PATCH edk2-platforms 2/3] Silicon/Socionext: implement I2C master protocol for SynQuacer I2C X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ard Biesheuvel MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" Add a driver that produces the I2C master protocol on top of the I2C controllers that are implemented in the SynQuacer Socionext SoC. Note that this supports two modes simultaneously: I2C controllers that are only usable at boot time, and usable via the I2C protocol stack, and I2C controllers that are dedicated for the RTC or other runtime components. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel --- Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentName.c | = 185 ++++++ Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBinding.c | = 238 ++++++++ Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.c | = 618 ++++++++++++++++++++ Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.h | = 162 +++++ Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.inf | = 59 ++ Silicon/Socionext/SynQuacer/SynQuacer.dec | = 5 + 6 files changed, 1267 insertions(+) diff --git a/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentN= ame.c b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentName.c new file mode 100644 index 000000000000..8d7aa417505b --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/ComponentName.c @@ -0,0 +1,185 @@ +/** @file + + Copyright (c) 2017, Linaro Ltd. All rights reserved. + + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BS= D License + which accompanies this distribution. The full text of the license may b= e found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include "SynQuacerI2cDxe.h" + +STATIC EFI_UNICODE_STRING_TABLE mSynQuacerI2cDriverNameTable[] =3D { + { + "en", + (CHAR16 *)L"Socionext SynQuacer I2C Driver" + }, + { } +}; + +STATIC EFI_UNICODE_STRING_TABLE mSynQuacerI2cControllerNameTable[] =3D { + { + "en", + (CHAR16 *)L"Socionext SynQuacer I2C Controller" + }, + { } +}; + +/** + Retrieves a Unicode string that is the user readable name of the driver. + + This function retrieves the user readable name of a driver in the form o= f a + Unicode string. If the driver specified by This has a user readable name= in + the language specified by Language, then a pointer to the driver name is + returned in DriverName, and EFI_SUCCESS is returned. If the driver speci= fied + by This does not support the language specified by Language, + then EFI_UNSUPPORTED is returned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTO= COL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the calle= r is + requesting, and it must match one of the + languages specified in SupportedLanguages.= The + number of languages supported by a driver = is up + to the driver writer. Language is specified + in RFC 4646 or ISO 639-2 language code for= mat. + + @param DriverName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + driver specified by This in the language + specified by Language. + + @retval EFI_SUCCESS The Unicode string for the Driver specifie= d by + This and the language specified by Languag= e was + returned in DriverName. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER DriverName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This does not supp= ort + the language specified by Language. + +**/ +STATIC +EFI_STATUS +EFIAPI +SynQuacerI2cGetDriverName ( + IN EFI_COMPONENT_NAME2_PROTOCOL *This, + IN CHAR8 *Language, + OUT CHAR16 **DriverName + ) +{ + return LookupUnicodeString2 (Language, + This->SupportedLanguages, + mSynQuacerI2cDriverNameTable, + DriverName, + FALSE); +} + +/** + Retrieves a Unicode string that is the user readable name of the control= ler + that is being managed by a driver. + + This function retrieves the user readable name of the controller specifi= ed by + ControllerHandle and ChildHandle in the form of a Unicode string. If the + driver specified by This has a user readable name in the language specif= ied by + Language, then a pointer to the controller name is returned in Controlle= rName, + and EFI_SUCCESS is returned. If the driver specified by This is not cur= rently + managing the controller specified by ControllerHandle and ChildHandle, + then EFI_UNSUPPORTED is returned. If the driver specified by This does = not + support the language specified by Language, then EFI_UNSUPPORTED is retu= rned. + + @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTO= COL or + EFI_COMPONENT_NAME_PROTOCOL instance. + + @param ControllerHandle[in] The handle of a controller that the driver + specified by This is managing. This handle + specifies the controller whose name is to = be + returned. + + @param ChildHandle[in] The handle of the child controller to retr= ieve + the name of. This is an optional paramete= r that + may be NULL. It will be NULL for device + drivers. It will also be NULL for a bus d= rivers + that wish to retrieve the name of the bus + controller. It will not be NULL for a bus + driver that wishes to retrieve the name of= a + child controller. + + @param Language[in] A pointer to a Null-terminated ASCII string + array indicating the language. This is the + language of the driver name that the calle= r is + requesting, and it must match one of the + languages specified in SupportedLanguages.= The + number of languages supported by a driver = is up + to the driver writer. Language is specifie= d in + RFC 4646 or ISO 639-2 language code format. + + @param ControllerName[out] A pointer to the Unicode string to return. + This Unicode string is the name of the + controller specified by ControllerHandle a= nd + ChildHandle in the language specified by + Language from the point of view of the dri= ver + specified by This. + + @retval EFI_SUCCESS The Unicode string for the user readable n= ame in + the language specified by Language for the + driver specified by This was returned in + DriverName. + + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL. + + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a va= lid + EFI_HANDLE. + + @retval EFI_INVALID_PARAMETER Language is NULL. + + @retval EFI_INVALID_PARAMETER ControllerName is NULL. + + @retval EFI_UNSUPPORTED The driver specified by This is not curren= tly + managing the controller specified by + ControllerHandle and ChildHandle. + + @retval EFI_UNSUPPORTED The driver specified by This does not supp= ort + the language specified by Language. + +**/ +STATIC +EFI_STATUS +EFIAPI +SynQuacerI2cGetControllerName ( + IN EFI_COMPONENT_NAME2_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_HANDLE ChildHandle O= PTIONAL, + IN CHAR8 *Language, + OUT CHAR16 **ControllerName + ) +{ + if (ChildHandle !=3D NULL) { + return EFI_UNSUPPORTED; + } + + return LookupUnicodeString2 (Language, + This->SupportedLanguages, + mSynQuacerI2cControllerNameTable, + ControllerName, + FALSE); +} + +// +// EFI Component Name 2 Protocol +// +EFI_COMPONENT_NAME2_PROTOCOL gSynQuacerI2cDriverComponentName2 =3D { + SynQuacerI2cGetDriverName, + SynQuacerI2cGetControllerName, + "en" +}; diff --git a/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBind= ing.c b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBinding.c new file mode 100644 index 000000000000..22e53408f419 --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/DriverBinding.c @@ -0,0 +1,238 @@ +/** @file + + Copyright (c) 2017, Linaro Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include "SynQuacerI2cDxe.h" + +/** + Tests to see if this driver supports a given controller. + + @param This[in] A pointer to the EFI_DRIVER_BINDING_PRO= TOCOL + instance. + @param ControllerHandle[in] The handle of the controller to test. + @param RemainingDevicePath[in] The remaining device path. + (Ignored - this is not a bus driver.) + + @retval EFI_SUCCESS The driver supports this controller. + @retval EFI_ALREADY_STARTED The device specified by ControllerHandl= e is + already being managed by the driver spe= cified + by This. + @retval EFI_UNSUPPORTED The device specified by ControllerHandl= e is + not supported by the driver specified b= y This. + +**/ +EFI_STATUS +EFIAPI +SynQuacerI2cDriverBindingSupported ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath + ) +{ + NON_DISCOVERABLE_DEVICE *Dev; + EFI_STATUS Status; + + // + // Connect to the USB stack + // + Status =3D gBS->OpenProtocol (ControllerHandle, + &gEdkiiNonDiscoverableDeviceProtocolGuid, + (VOID **) &Dev, + This->DriverBindingHandle, + ControllerHandle, + EFI_OPEN_PROTOCOL_BY_DRIVER); + if (EFI_ERROR (Status)) { + return Status; + } + + if (CompareGuid (Dev->Type, &gSynQuacerNonDiscoverableI2cMasterGuid) || + CompareGuid (Dev->Type, &gSynQuacerNonDiscoverableRuntimeI2cMasterGu= id)) { + Status =3D EFI_SUCCESS; + } else { + Status =3D EFI_UNSUPPORTED; + } + + // + // Clean up. + // + gBS->CloseProtocol (ControllerHandle, + &gEdkiiNonDiscoverableDeviceProtocolGuid, + This->DriverBindingHandle, + ControllerHandle); + + return Status; +} + + +/** + Starts a device controller or a bus controller. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PRO= TOCOL + instance. + @param[in] ControllerHandle The handle of the device to start. This + handle must support a protocol interfac= e that + supplies an I/O abstraction to the driv= er. + @param[in] RemainingDevicePath The remaining portion of the device pat= h. + (Ignored - this is not a bus driver.) + + @retval EFI_SUCCESS The device was started. + @retval EFI_DEVICE_ERROR The device could not be started due to a + device error. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due = to a + lack of resources. + +**/ +EFI_STATUS +EFIAPI +SynQuacerI2cDriverBindingStart ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL + ) +{ + return SynQuacerI2cInit (This->DriverBindingHandle, ControllerHandle); +} + + +/** + Stops a device controller or a bus controller. + + @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOC= OL + instance. + @param[in] ControllerHandle A handle to the device being stopped. The = handle + must support a bus specific I/O protocol f= or the + driver to use to stop the device. + @param[in] NumberOfChildren The number of child device handles in + ChildHandleBuffer. + @param[in] ChildHandleBuffer An array of child handles to be freed. May= be + NULL if NumberOfChildren is 0. + + @retval EFI_SUCCESS The device was stopped. + @retval EFI_DEVICE_ERROR The device could not be stopped due to a d= evice + error. + +**/ +EFI_STATUS +EFIAPI +SynQuacerI2cDriverBindingStop ( + IN EFI_DRIVER_BINDING_PROTOCOL *This, + IN EFI_HANDLE ControllerHandle, + IN UINTN NumberOfChildren, + IN EFI_HANDLE *ChildHandleBuffer OPTIONAL + ) +{ + return SynQuacerI2cRelease (This->DriverBindingHandle, ControllerHandle); +} + + +STATIC EFI_DRIVER_BINDING_PROTOCOL gSynQuacerI2cDriverBinding =3D { + SynQuacerI2cDriverBindingSupported, + SynQuacerI2cDriverBindingStart, + SynQuacerI2cDriverBindingStop, + 0xa, + NULL, + NULL +}; + + +/** + The entry point of I2c UEFI Driver. + + @param ImageHandle The image handle of the UEFI Driver. + @param SystemTable A pointer to the EFI System Table. + + @retval EFI_SUCCESS The Driver or UEFI Driver exited norm= ally. + @retval EFI_INCOMPATIBLE_VERSION _gUefiDriverRevision is greater than + SystemTable->Hdr.Revision. + +**/ +EFI_STATUS +EFIAPI +SynQuacerI2cDxeEntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + + // + // Add the driver to the list of drivers + // + Status =3D EfiLibInstallDriverBindingComponentName2 ( + ImageHandle, SystemTable, &gSynQuacerI2cDriverBinding, ImageH= andle, + NULL, &gSynQuacerI2cDriverComponentName2); + ASSERT_EFI_ERROR (Status); + + DEBUG ((DEBUG_INFO, "*** Installed SynQuacer I2C UEFI driver! ***\n")); + + return EFI_SUCCESS; +} + + +/** + Unload function for the I2c UEFI Driver. + + @param ImageHandle[in] The allocated handle for the EFI image + + @retval EFI_SUCCESS The driver was unloaded successfully + @retval EFI_INVALID_PARAMETER ImageHandle is not a valid image handle. + +**/ +EFI_STATUS +EFIAPI +SynQuacerI2cDxeUnload ( + IN EFI_HANDLE ImageHandle + ) +{ + EFI_STATUS Status; + EFI_HANDLE *HandleBuffer; + UINTN HandleCount; + UINTN Index; + + // + // Retrieve all USB I/O handles in the handle database + // + Status =3D gBS->LocateHandleBuffer (ByProtocol, + &gEdkiiNonDiscoverableDeviceProtocolGu= id, + NULL, + &HandleCount, + &HandleBuffer); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Disconnect the driver from the handles in the handle database + // + for (Index =3D 0; Index < HandleCount; Index++) { + Status =3D gBS->DisconnectController (HandleBuffer[Index], + gImageHandle, + NULL); + } + + // + // Free the handle array + // + gBS->FreePool (HandleBuffer); + + // + // Uninstall protocols installed by the driver in its entrypoint + // + Status =3D gBS->UninstallMultipleProtocolInterfaces (ImageHandle, + &gEfiDriverBindingProtocolGuid, + &gSynQuacerI2cDriverBinding, + NULL + ); + + return EFI_SUCCESS; +} diff --git a/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI= 2cDxe.c b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cD= xe.c new file mode 100644 index 000000000000..adc4813c7cd5 --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.c @@ -0,0 +1,618 @@ +/** @file + + Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BS= D License + which accompanies this distribution. The full text of the license may be= found at + http://opensource.org/licenses/bsd-license.php + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#include "SynQuacerI2cDxe.h" + +#define __DEBUG(x) do { if (!EfiAtRuntime()) DEBUG (x); } while (0) + +/** + Set the frequency for the I2C clock line. + + This routine must be called at or below TPL_NOTIFY. + + The software and controller do a best case effort of using the specified + frequency for the I2C bus. If the frequency does not match exactly then + the I2C master protocol selects the next lower frequency to avoid + exceeding the operating conditions for any of the I2C devices on the bus. + For example if 400 KHz was specified and the controller's divide network + only supports 402 KHz or 398 KHz then the I2C master protocol selects 398 + KHz. If there are not lower frequencies available, then return + EFI_UNSUPPORTED. + + @param[in] This Pointer to an EFI_I2C_MASTER_PROTOCOL structure + @param[in] BusClockHertz Pointer to the requested I2C bus clock frequen= cy + in Hertz. Upon return this value contains the + actual frequency in use by the I2C controller. + + @retval EFI_SUCCESS The bus frequency was set successfully. + @retval EFI_ALREADY_STARTED The controller is busy with another transa= ction. + @retval EFI_INVALID_PARAMETER BusClockHertz is NULL + @retval EFI_UNSUPPORTED The controller does not support this frequ= ency. + +**/ +STATIC +EFI_STATUS +EFIAPI +SynQuacerI2cSetBusFrequency ( + IN CONST EFI_I2C_MASTER_PROTOCOL *This, + IN OUT UINTN *BusClockHertz + ) +{ + SYNQUACER_I2C_MASTER *I2c; + UINT8 Ccr, Csr; + + I2c =3D SYNQUACER_I2C_FROM_THIS (This); + + if (BusClockHertz =3D=3D NULL) { + return EFI_INVALID_PARAMETER; + } + + switch (*BusClockHertz) { + case F_I2C_SPEED_FM: + if (REFCLK_RATE <=3D F_I2C_CLK_RATE_18M) { + Ccr =3D F_I2C_CCR_CS_FAST_MAX_18M (REFCLK_RATE); + Csr =3D F_I2C_CSR_CS_FAST_MAX_18M (REFCLK_RATE); + } else { + Ccr =3D F_I2C_CCR_CS_FAST_MIN_18M (REFCLK_RATE); + Csr =3D F_I2C_CSR_CS_FAST_MIN_18M (REFCLK_RATE); + } + + // Set Clock and enable, Set fast mode + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CCR, + Ccr | F_I2C_CCR_FM | F_I2C_CCR_EN); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CSR, Csr); + break; + + case F_I2C_SPEED_SM: + if (REFCLK_RATE <=3D F_I2C_CLK_RATE_18M) { + Ccr =3D F_I2C_CCR_CS_STANDARD_MAX_18M (REFCLK_RATE); + Csr =3D F_I2C_CSR_CS_STANDARD_MAX_18M (REFCLK_RATE); + } else { + Ccr =3D F_I2C_CCR_CS_STANDARD_MIN_18M (REFCLK_RATE); + Csr =3D F_I2C_CSR_CS_STANDARD_MIN_18M (REFCLK_RATE); + } + + // Set Clock and enable, Set standard mode + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CCR, Ccr | F_I2C_CCR_EN); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CSR, Csr); + break; + + default: + return EFI_UNSUPPORTED; + } + + MemoryFence (); + + return EFI_SUCCESS; +} + +/** + Reset the I2C controller and configure it for use + + This routine must be called at or below TPL_NOTIFY. + + The I2C controller is reset. The caller must call SetBusFrequench() aft= er + calling Reset(). + + @param[in] This Pointer to an EFI_I2C_MASTER_PROTOCOL structur= e. + + @retval EFI_SUCCESS The reset completed successfully. + @retval EFI_ALREADY_STARTED The controller is busy with another transact= ion. + @retval EFI_DEVICE_ERROR The reset operation failed. + +**/ +STATIC +EFI_STATUS +EFIAPI +SynQuacerI2cReset ( + IN CONST EFI_I2C_MASTER_PROTOCOL *This + ) +{ + SYNQUACER_I2C_MASTER *I2c; + + I2c =3D SYNQUACER_I2C_FROM_THIS (This); + + // Disable the clock + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CCR, 0); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_CSR, 0); + + MemoryFence (); + + // Set own Address + MmioWrite8 (I2c->MmioBase + F_I2C_REG_ADR, 0); + + // Set PCLK frequency + MmioWrite8 (I2c->MmioBase + F_I2C_REG_FSR, F_I2C_BUS_CLK_FR (REFCLK_RATE= )); + + // clear IRQ (INT=3D0, BER=3D0), Interrupt Disable + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, 0); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BC2R, 0); + + MemoryFence (); + + return EFI_SUCCESS; +} + +STATIC +VOID +Stall ( + IN UINTN Cycles + ) +{ + while (Cycles--) { + MemoryFence (); + } +} + +STATIC +EFI_STATUS +SynQuacerI2cMasterStart ( + IN SYNQUACER_I2C_MASTER *I2c, + IN UINTN SlaveAddress, + IN EFI_I2C_OPERATION *Op + ) +{ + UINT8 Bsr; + UINT8 Bcr; + + if (Op->Flags & I2C_FLAG_READ) { + MmioWrite8 (I2c->MmioBase + F_I2C_REG_DAR, (SlaveAddress << 1) | 1); + } else { + MmioWrite8 (I2c->MmioBase + F_I2C_REG_DAR, SlaveAddress << 1); + } + + __DEBUG ((DEBUG_INFO, "%a: slave:0x%02x\n", __FUNCTION__, SlaveAddress)); + + Bsr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR); + Bcr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BCR); + + __DEBUG ((DEBUG_INFO, "%a: Bsr:0x%x, Bcr:0x%x\n", __FUNCTION__, Bsr, Bcr= )); + + if ((Bsr & F_I2C_BSR_BB) && !(Bcr & F_I2C_BCR_MSS)) { + __DEBUG ((DEBUG_INFO, "%a: bus is busy\n", __FUNCTION__)); + return EFI_ALREADY_STARTED; + } + + if (Bsr & F_I2C_BSR_BB) { // Bus is busy + __DEBUG ((DEBUG_INFO, "%a: Continuous Start\n", __FUNCTION__)); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, Bcr | F_I2C_BCR_SCC); + } else { + if (Bcr & F_I2C_BCR_MSS) { + __DEBUG ((DEBUG_WARN, "%a: is not in master mode\n", __FUNCTION__)); + return EFI_DEVICE_ERROR; + } + __DEBUG ((DEBUG_INFO, "%a: Start Condition\n", __FUNCTION__)); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, + Bcr | F_I2C_BCR_MSS | F_I2C_BCR_INTE | F_I2C_BCR_BEIE); + } + + Stall (1000); + + Bsr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR); + Bcr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BCR); + + __DEBUG ((DEBUG_INFO, "%a: Bsr:0x%x, Bcr:0x%x\n", __FUNCTION__, Bsr, Bcr= )); + + if ((Bsr & F_I2C_BSR_AL) || !(Bcr & F_I2C_BCR_MSS)) { + __DEBUG ((DEBUG_INFO, "%a: arbitration lost\n", __FUNCTION__)); + return EFI_DEVICE_ERROR; + } + return EFI_SUCCESS; +} + +STATIC +EFI_STATUS +WaitForInt ( + IN SYNQUACER_I2C_MASTER *I2c + ) +{ + UINT8 Bsr; + UINTN Timeout =3D 50000; + + do { + MemoryFence (); + + Bsr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BCR); + if (Bsr & F_I2C_BCR_INT) { + return EFI_SUCCESS; + } + } while (Timeout--); + + return EFI_DEVICE_ERROR; +} + +//STATIC +//EFI_STATUS +//WaitForAck ( +// IN SYNQUACER_I2C_MASTER *I2c +// ) +//{ +// UINT8 Bsr; +// UINTN Timeout =3D 50000; +// +// do { +// MemoryFence (); +// +// Bsr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR); +// if (!(Bsr & F_I2C_BSR_LRB)) { +// return EFI_SUCCESS; +// } +// } while (Timeout--); +// +// return EFI_DEVICE_ERROR; +//} + +/** + Start an I2C transaction on the host controller. + + This routine must be called at or below TPL_NOTIFY. For synchronous + requests this routine must be called at or below TPL_CALLBACK. + + This function initiates an I2C transaction on the controller. To + enable proper error handling by the I2C protocol stack, the I2C + master protocol does not support queuing but instead only manages + one I2C transaction at a time. This API requires that the I2C bus + is in the correct configuration for the I2C transaction. + + The transaction is performed by sending a start-bit and selecting the + I2C device with the specified I2C slave address and then performing + the specified I2C operations. When multiple operations are requested + they are separated with a repeated start bit and the slave address. + The transaction is terminated with a stop bit. + + When Event is NULL, StartRequest operates synchronously and returns + the I2C completion status as its return value. + + When Event is not NULL, StartRequest synchronously returns EFI_SUCCESS + indicating that the I2C transaction was started asynchronously. The + transaction status value is returned in the buffer pointed to by + I2cStatus upon the completion of the I2C transaction when I2cStatus + is not NULL. After the transaction status is returned the Event is + signaled. + + Note: The typical consumer of this API is the I2C host protocol. + Extreme care must be taken by other consumers of this API to prevent + confusing the third party I2C drivers due to a state change at the + I2C device which the third party I2C drivers did not initiate. I2C + platform specific code may use this API within these guidelines. + + @param[in] This Pointer to an EFI_I2C_MASTER_PROTOCOL structur= e. + @param[in] SlaveAddress Address of the device on the I2C bus. Set the + I2C_ADDRESSING_10_BIT when using 10-bit addres= ses, + clear this bit for 7-bit addressing. Bits 0-6 + are used for 7-bit I2C slave addresses and bits + 0-9 are used for 10-bit I2C slave addresses. + @param[in] RequestPacket Pointer to an EFI_I2C_REQUEST_PACKET + structure describing the I2C transaction. + @param[in] Event Event to signal for asynchronous transactions, + NULL for synchronous transactions + @param[out] I2cStatus Optional buffer to receive the I2C transaction + completion status + + @retval EFI_SUCCESS The asynchronous transaction was successfu= lly + started when Event is not NULL. + @retval EFI_SUCCESS The transaction completed successfully when + Event is NULL. + @retval EFI_ALREADY_STARTED The controller is busy with another transa= ction. + @retval EFI_BAD_BUFFER_SIZE The RequestPacket->LengthInBytes value is = too + large. + @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the + transaction. + @retval EFI_INVALID_PARAMETER RequestPacket is NULL + @retval EFI_NOT_FOUND Reserved bit set in the SlaveAddress param= eter + @retval EFI_NO_RESPONSE The I2C device is not responding to the sl= ave + address. EFI_DEVICE_ERROR will be returne= d if + the controller cannot distinguish when the= NACK + occurred. + @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C transaction + @retval EFI_UNSUPPORTED The controller does not support the reques= ted + transaction. + +**/ +STATIC +EFI_STATUS +EFIAPI +SynQuacerI2cStartRequest ( + IN CONST EFI_I2C_MASTER_PROTOCOL *This, + IN UINTN SlaveAddress, + IN EFI_I2C_REQUEST_PACKET *RequestPacket, + IN EFI_EVENT Event OPTIONAL, + OUT EFI_STATUS *I2cStatus OPTIONAL + ) +{ + SYNQUACER_I2C_MASTER *I2c; + UINTN Idx; + EFI_I2C_OPERATION *Op; + UINTN BufIdx; + EFI_STATUS Status; + EFI_TPL Tpl; + BOOLEAN AtRuntime; + UINT8 Bsr; + UINT8 Bcr; + + I2c =3D SYNQUACER_I2C_FROM_THIS (This); + + // + // We can only do synchronous operations at runtime + // + AtRuntime =3D EfiAtRuntime (); + if (AtRuntime && Event !=3D NULL) { + return EFI_UNSUPPORTED; + } + + if (!AtRuntime) { + Tpl =3D gBS->RaiseTPL (TPL_HIGH_LEVEL); + } + + for (Idx =3D 0, Op =3D RequestPacket->Operation, Status =3D EFI_SUCCESS; + Idx < RequestPacket->OperationCount && !EFI_ERROR (Status); + Idx++, Op++) { + + Status =3D SynQuacerI2cMasterStart (I2c, SlaveAddress, Op); + if (EFI_ERROR (Status)) { + return Status; + } + + Status =3D WaitForInt (I2c); + if (EFI_ERROR (Status)) { + __DEBUG ((DEBUG_WARN, "%a: Timeout waiting for interrupt - %r\n", + Status)); + break; + } + + if (MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR) & F_I2C_BSR_LRB) { + __DEBUG ((DEBUG_WARN, "%a: No ack received - %r\n", __FUNCTION__)); + Status =3D EFI_DEVICE_ERROR; + break; + } + + BufIdx =3D 0; + do { + Bsr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR); + Bcr =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_BCR); + + __DEBUG ((DEBUG_INFO, "%a: Bcr:0x%x\n", __FUNCTION__, Bcr)); + + if (Bcr & F_I2C_BCR_BER) { + __DEBUG ((DEBUG_WARN, "%a: Bus error detected\n", __FUNCTION__)); + Status =3D EFI_DEVICE_ERROR; + break; + } + + if ((Bsr & F_I2C_BSR_AL) || !(Bcr & F_I2C_BCR_MSS)) { + __DEBUG ((DEBUG_WARN, "%a: Arbitration lost\n", __FUNCTION__)); + Status =3D EFI_DEVICE_ERROR; + break; + } + + if (Op->Flags & I2C_FLAG_READ) { + if (BufIdx =3D=3D Op->LengthInBytes - 1) { + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, + F_I2C_BCR_MSS | F_I2C_BCR_INTE | F_I2C_BCR_BEIE); + } else { + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, + F_I2C_BCR_MSS | F_I2C_BCR_INTE | F_I2C_BCR_BEIE | F_I2C_BCR_AC= K); + } + + Status =3D WaitForInt (I2c); + if (EFI_ERROR (Status)) { + __DEBUG ((DEBUG_WARN, "%a: Timeout waiting for interrupt - %r\n", + __FUNCTION__, Status)); + break; + } + + if (!(MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR) & F_I2C_BSR_FBT)) { + Op->Buffer [BufIdx++] =3D MmioRead8 (I2c->MmioBase + F_I2C_REG_D= AR); + } + } else { + MmioWrite8 (I2c->MmioBase + F_I2C_REG_DAR, Op->Buffer [BufIdx++]); + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, + F_I2C_BCR_MSS | F_I2C_BCR_INTE | F_I2C_BCR_BEIE); + + Status =3D WaitForInt (I2c); + if (EFI_ERROR (Status)) { + __DEBUG ((DEBUG_WARN, "%a: Timeout waiting for interrupt - %r\n", + __FUNCTION__, Status)); + break; + } + + if (MmioRead8 (I2c->MmioBase + F_I2C_REG_BSR) & F_I2C_BSR_LRB) { + __DEBUG ((DEBUG_WARN, "%a: No ack received\n", __FUNCTION__)); + Status =3D EFI_DEVICE_ERROR; + break; + } + } + } while (BufIdx < Op->LengthInBytes); + } + + // Stop the transfer + MmioWrite8 (I2c->MmioBase + F_I2C_REG_BCR, 0); + + if (!AtRuntime) { + gBS->RestoreTPL (Tpl); + } + + if (Event) { + *I2cStatus =3D Status; + gBS->SignalEvent (Event); + } + return Status; +} + +STATIC +VOID +EFIAPI +SynQuacerI2cVirtualNotifyEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + SYNQUACER_I2C_MASTER *I2c =3D Context; + + EfiConvertPointer (0x0, (VOID **)&I2c->I2cMaster.SetBusFrequency); + EfiConvertPointer (0x0, (VOID **)&I2c->I2cMaster.Reset); + EfiConvertPointer (0x0, (VOID **)&I2c->I2cMaster.StartRequest); + EfiConvertPointer (0x0, (VOID **)&I2c->I2cMaster.I2cControllerCapabiliti= es); + EfiConvertPointer (0x0, (VOID **)&I2c->MmioBase); +} + +EFI_STATUS +SynQuacerI2cInit ( + IN EFI_HANDLE DriverBindingHandle, + IN EFI_HANDLE ControllerHandle + ) +{ + EFI_STATUS Status; + NON_DISCOVERABLE_DEVICE *Dev; + SYNQUACER_I2C_MASTER *I2c; + BOOLEAN Runtime; + + Status =3D gBS->OpenProtocol (ControllerHandle, + &gEdkiiNonDiscoverableDeviceProtocolGuid, + (VOID **)&Dev, DriverBindingHandle, + ControllerHandle, EFI_OPEN_PROTOCOL_BY_DRIVE= R); + if (EFI_ERROR (Status)) { + return Status; + } + + Runtime =3D CompareGuid (Dev->Type, + &gSynQuacerNonDiscoverableRuntimeI2cMasterGuid); + + // Allocate Resources + if (Runtime) { + I2c =3D AllocateRuntimeZeroPool (sizeof (SYNQUACER_I2C_MASTER)); + } else { + I2c =3D AllocateZeroPool (sizeof (SYNQUACER_I2C_MASTER)); + } + if (I2c =3D=3D NULL) { + Status =3D EFI_OUT_OF_RESOURCES; + goto CloseProtocol; + } + + I2c->Signature =3D SYNQUACER_I2C_SIGNATURE; + I2c->I2cMaster.SetBusFrequency =3D SynQuacerI2cSetBusFrequency; + I2c->I2cMaster.Reset =3D SynQuacerI2cReset; + I2c->I2cMaster.StartRequest =3D SynQuacerI2cStartRequest; + I2c->MmioBase =3D Dev->Resources[0].AddrRangeMin; + I2c->Dev =3D Dev; + + if (Runtime) { + I2c->Runtime =3D TRUE; + + // Declare the controller as EFI_MEMORY_RUNTIME + Status =3D gDS->AddMemorySpace ( + EfiGcdMemoryTypeMemoryMappedIo, + Dev->Resources[0].AddrRangeMin, + Dev->Resources[0].AddrLen, + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME); + if (EFI_ERROR (Status)) { + __DEBUG ((DEBUG_WARN, "%a: failed to add memory space - %r\n", + __FUNCTION__, Status)); + } + + Status =3D gDS->SetMemorySpaceAttributes ( + Dev->Resources[0].AddrRangeMin, + Dev->Resources[0].AddrLen, + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME); + if (EFI_ERROR (Status)) { + goto FreeDevice; + } + + // + // Register for the virtual address change event + // + Status =3D gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, TPL_NOTIFY, + SynQuacerI2cVirtualNotifyEvent, I2c, + &gEfiEventVirtualAddressChangeGuid, + &I2c->VirtualAddressChangeEvent); + if (EFI_ERROR (Status)) { + goto FreeDevice; + } + } + + CopyGuid (&I2c->DevicePath.Vendor.Guid, &gEfiCallerIdGuid); + I2c->DevicePath.MmioBase =3D I2c->MmioBase; + SetDevicePathNodeLength (&I2c->DevicePath.Vendor, + sizeof (I2c->DevicePath) - sizeof (I2c->DevicePath.End)); + SetDevicePathEndNode (&I2c->DevicePath.End); + + Status =3D gBS->InstallMultipleProtocolInterfaces (&ControllerHandle, + &gEfiI2cMasterProtocolGuid, &I2c->I2cMaster, + &gEfiDevicePathProtocolGuid, &I2c->DevicePath, + NULL); + if (EFI_ERROR (Status)) { + goto CloseEvent; + } + return EFI_SUCCESS; + +CloseEvent: + if (Runtime) { + gBS->CloseEvent (I2c->VirtualAddressChangeEvent); + } + +FreeDevice: + FreePool (I2c); + +CloseProtocol: + gBS->CloseProtocol (ControllerHandle, + &gEdkiiNonDiscoverableDeviceProtocolGuid, + DriverBindingHandle, + ControllerHandle); + return Status; +} + +EFI_STATUS +SynQuacerI2cRelease ( + IN EFI_HANDLE DriverBindingHandle, + IN EFI_HANDLE ControllerHandle + ) +{ + EFI_I2C_MASTER_PROTOCOL *I2cMaster; + SYNQUACER_I2C_MASTER *I2c; + EFI_STATUS Status; + + Status =3D gBS->HandleProtocol (ControllerHandle, + &gEfiI2cMasterProtocolGuid, + (VOID **)&I2cMaster); + ASSERT_EFI_ERROR (Status); + if (EFI_ERROR (Status)) { + return Status; + } + + I2c =3D SYNQUACER_I2C_FROM_THIS (I2cMaster); + + Status =3D gBS->UninstallMultipleProtocolInterfaces (ControllerHandle, + &gEfiI2cMasterProtocolGuid, I2cMaster, + &gEfiDevicePathProtocolGuid, &I2c->DevicePath, + NULL); + if (EFI_ERROR (Status)) { + return Status; + } + + if (I2c->Runtime) { + gBS->CloseEvent (I2c->VirtualAddressChangeEvent); + } + + Status =3D gBS->CloseProtocol (ControllerHandle, + &gEdkiiNonDiscoverableDeviceProtocolGuid, + DriverBindingHandle, + ControllerHandle); + ASSERT_EFI_ERROR (Status); + if (EFI_ERROR (Status)) { + return Status; + } + + gBS->FreePool (I2c); + + return EFI_SUCCESS; +} diff --git a/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI= 2cDxe.h b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cD= xe.h new file mode 100644 index 000000000000..dac02e951bb2 --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.h @@ -0,0 +1,162 @@ +/** @file + + Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BS= D License + which accompanies this distribution. The full text of the license may be= found at + http://opensource.org/licenses/bsd-license.php + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + +**/ + +#ifndef __SYNQUACER_I2C_DXE_H__ +#define __SYNQUACER_I2C_DXE_H__ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +extern EFI_COMPONENT_NAME2_PROTOCOL gSynQuacerI2cDriverComponentName2; + +#define SYNQUACER_I2C_SIGNATURE SIGNATURE_32 ('S', 'I', '2', 'C') +#define SYNQUACER_I2C_FROM_THIS(a) CR (a, SYNQUACER_I2C_MASTER, \ + I2cMaster, SYNQUACER_I2C_SIGNA= TURE) + +#pragma pack(1) +typedef struct { + VENDOR_DEVICE_PATH Vendor; + UINT64 MmioBase; + EFI_DEVICE_PATH_PROTOCOL End; +} SYNQUACER_I2C_DEVICE_PATH; +#pragma pack() + +typedef struct { + UINT32 Signature; + EFI_I2C_MASTER_PROTOCOL I2cMaster; + EFI_PHYSICAL_ADDRESS MmioBase; + SYNQUACER_I2C_DEVICE_PATH DevicePath; + NON_DISCOVERABLE_DEVICE *Dev; + EFI_EVENT VirtualAddressChangeEvent; + BOOLEAN Runtime; +} SYNQUACER_I2C_MASTER; + +EFI_STATUS +SynQuacerI2cInit ( + IN EFI_HANDLE DriverBindingHandle, + IN EFI_HANDLE ControllerHandle + ); + +EFI_STATUS +SynQuacerI2cRelease ( + IN EFI_HANDLE DriverBindingHandle, + IN EFI_HANDLE ControllerHandle + ); + +#define REFCLK_RATE FixedPcdGet32 (PcdI2cReferenceClock) + +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + +#define F_I2C_SPEED_SM 100 +#define F_I2C_SPEED_FM 400 + +// I2C register adress definitions +#define F_I2C_REG_BSR (0x00 << 2) // Bus Status Regster +#define F_I2C_REG_BCR (0x01 << 2) // Bus Control Register +#define F_I2C_REG_CCR (0x02 << 2) // Clock Control Register +#define F_I2C_REG_ADR (0x03 << 2) // Address Register +#define F_I2C_REG_DAR (0x04 << 2) // Data Register +#define F_I2C_REG_CSR (0x05 << 2) // Expansion CS Register +#define F_I2C_REG_FSR (0x06 << 2) // Bus Clock Frequency Register +#define F_I2C_REG_BC2R (0x07 << 2) // Bus Control 2 Register + +// I2C register bit definitions +#define F_I2C_BSR_FBT BIT0 // First Byte Transfer +#define F_I2C_BSR_GCA BIT1 // General Call Address +#define F_I2C_BSR_AAS BIT2 // Address as Slave +#define F_I2C_BSR_TRX BIT3 // Transfer/Receive +#define F_I2C_BSR_LRB BIT4 // Last Received Bit +#define F_I2C_BSR_AL BIT5 // Arbitration Lost +#define F_I2C_BSR_RSC BIT6 // Repeated Start Condition +#define F_I2C_BSR_BB BIT7 // Bus Busy + +#define F_I2C_BCR_INT BIT0 // Interrupt +#define F_I2C_BCR_INTE BIT1 // Interrupt Enable +#define F_I2C_BCR_GCAA BIT2 // General Call Access Acknowledge +#define F_I2C_BCR_ACK BIT3 // Acknowledge +#define F_I2C_BCR_MSS BIT4 // Master Slave Select +#define F_I2C_BCR_SCC BIT5 // Start Condition Continue +#define F_I2C_BCR_BEIE BIT6 // Bus Error Interrupt Enable +#define F_I2C_BCR_BER BIT7 // Bus Error + +#define F_I2C_CCR_CS_MASK 0x1f // CCR Clock Period Select +#define F_I2C_CCR_EN BIT5 // Enable +#define F_I2C_CCR_FM BIT6 // Speed Mode Select + +#define F_I2C_CSR_CS_MASK 0x3f // CSR Clock Period Select + +#define F_I2C_BC2R_SCLL BIT0 // SCL Low Drive +#define F_I2C_BC2R_SDAL BIT1 // SDA Low Drive +#define F_I2C_BC2R_SCLS BIT4 // SCL Status +#define F_I2C_BC2R_SDAS BIT5 // SDA Status + +// PCLK frequency +#define F_I2C_BUS_CLK_FR(rate) ((rate) / 20000000 + 1) + +#define F_I2C_MIN_CLK_RATE (14 * 1000000) // min frequency 1= 4 MHz +#define F_I2C_MAX_CLK_RATE (200 * 1000000) // max frequency 2= 00 MHz +#define F_I2C_CLK_RATE_18M (18 * 1000000) // threshold freq = 18 MHz + +// STANDARD MODE frequency +#define F_I2C_CLK_MASTER_STANDARD(rate) \ + DIV_ROUND_UP (DIV_ROUND_UP ((rate), 100000) - 2, 2) + +// FAST MODE frequency +#define F_I2C_CLK_MASTER_FAST(rate) \ + DIV_ROUND_UP ((DIV_ROUND_UP ((rate), 400000) - 2) * 2, 3) + +// (clkrate <=3D 18000000) +// calculate the value of CS bits in CCR register in standard mode +#define F_I2C_CCR_CS_STANDARD_MAX_18M(rate) \ + ((F_I2C_CLK_MASTER_STANDARD (rate) - 65) & F_I2C_CCR_CS_MASK) + +// calculate the value of CS bits in CSR register in standard mode +#define F_I2C_CSR_CS_STANDARD_MAX_18M(rate) 0x00 + +// calculate the value of CS bits in CCR register in fast mode +#define F_I2C_CCR_CS_FAST_MAX_18M(rate) \ + ((F_I2C_CLK_MASTER_FAST (rate) - 1) & F_I2C_CCR_CS_MASK) + +// calculate the value of CS bits in CSR register in fast mode +#define F_I2C_CSR_CS_FAST_MAX_18M(rate) 0x00 + +// (clkrate > 18000000) +// calculate the value of CS bits in CCR register in standard mode */ +#define F_I2C_CCR_CS_STANDARD_MIN_18M(rate) \ + ((F_I2C_CLK_MASTER_STANDARD (rate) - 1) & F_I2C_CCR_CS_MASK) + +// calculate the value of CS bits in CSR register in standard mode +#define F_I2C_CSR_CS_STANDARD_MIN_18M(rate) \ + (((F_I2C_CLK_MASTER_STANDARD (rate) - 1) >> 5) & F_I2C_CSR_CS_= MASK) + +// calculate the value of CS bits in CCR register in fast mode +#define F_I2C_CCR_CS_FAST_MIN_18M(rate) \ + ((F_I2C_CLK_MASTER_FAST (rate) - 1) & F_I2C_CCR_CS_MASK) + +/* calculate the value of CS bits in CSR register in fast mode */ +#define F_I2C_CSR_CS_FAST_MIN_18M(rate) \ + (((F_I2C_CLK_MASTER_FAST (rate) - 1) >> 5) & F_I2C_CSR_CS_MASK) + +#endif diff --git a/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI= 2cDxe.inf b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2= cDxe.inf new file mode 100644 index 000000000000..fa715366878c --- /dev/null +++ b/Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.i= nf @@ -0,0 +1,59 @@ +#/** @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the B= SD License +# which accompanies this distribution. The full text of the license may b= e found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IM= PLIED. +# +#**/ + +[Defines] + INF_VERSION =3D 0x0001001A + BASE_NAME =3D SynQuacerI2cDxe + FILE_GUID =3D ab5ed376-dd38-4d22-ae89-b645a4a3236e + MODULE_TYPE =3D DXE_RUNTIME_DRIVER + VERSION_STRING =3D 1.0 + ENTRY_POINT =3D SynQuacerI2cDxeEntryPoint + UNLOAD =3D SynQuacerI2cDxeUnload + +[Sources.common] + ComponentName.c + DriverBinding.c + SynQuacerI2cDxe.c + SynQuacerI2cDxe.h + +[Packages] + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + Silicon/Socionext/SynQuacer/SynQuacer.dec + +[LibraryClasses] + BaseMemoryLib + DebugLib + DevicePathLib + DxeServicesTableLib + IoLib + MemoryAllocationLib + UefiBootServicesTableLib + UefiLib + UefiDriverEntryPoint + UefiRuntimeLib + +[Guids] + gEfiEventVirtualAddressChangeGuid + gSynQuacerNonDiscoverableI2cMasterGuid + gSynQuacerNonDiscoverableRuntimeI2cMasterGuid + +[Protocols] + gEdkiiNonDiscoverableDeviceProtocolGuid ## TO_START + gEfiI2cMasterProtocolGuid ## BY_START + +[FixedPcd] + gSynQuacerTokenSpaceGuid.PcdI2cReferenceClock + +[Depex] + TRUE diff --git a/Silicon/Socionext/SynQuacer/SynQuacer.dec b/Silicon/Socionext/= SynQuacer/SynQuacer.dec index a48338c4693a..6f2849efe026 100644 --- a/Silicon/Socionext/SynQuacer/SynQuacer.dec +++ b/Silicon/Socionext/SynQuacer/SynQuacer.dec @@ -22,6 +22,9 @@ [Includes] [Guids] gSynQuacerTokenSpaceGuid =3D { 0x4d04555b, 0xdfdc, 0x418a, { 0x8a, 0xab,= 0x07, 0xce, 0xef, 0x46, 0x82, 0xbb } } =20 + gSynQuacerNonDiscoverableI2cMasterGuid =3D { 0x364ee675, 0x9e44, 0x42b7,= { 0xa5, 0xe4, 0x92, 0x84, 0xdb, 0x85, 0xda, 0x09 } } + gSynQuacerNonDiscoverableRuntimeI2cMasterGuid =3D { 0x5f35aa9b, 0x8c6f, = 0x4828, { 0xbd, 0x44, 0x7c, 0xc0, 0xeb, 0x2d, 0xfe, 0xb9 } } + [Ppis] gSynQuacerDramInfoPpiGuid =3D { 0x3e1d7356, 0xdda4, 0x4b1a, { 0x93, 0x46= , 0xbf, 0x89, 0x1c, 0x86, 0x46, 0xcc } } =20 @@ -35,3 +38,5 @@ [PcdsFixedAtBuild] gSynQuacerTokenSpaceGuid.PcdNetsecPhyAddress|0|UINT8|0x00000005 =20 gSynQuacerTokenSpaceGuid.PcdClearSettingsGpioPin|0|UINT32|0x00000006 + + gSynQuacerTokenSpaceGuid.PcdI2cReferenceClock|62500000|UINT32|0x00000007 --=20 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel From nobody Wed Dec 25 02:40:34 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 1509704237807467.3635007138058; Fri, 3 Nov 2017 03:17:17 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 52660203555EB; Fri, 3 Nov 2017 03:13:19 -0700 (PDT) Received: from mail-wr0-x243.google.com (mail-wr0-x243.google.com [IPv6:2a00:1450:400c:c0c::243]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 2271F203555E2 for ; Fri, 3 Nov 2017 03:13:18 -0700 (PDT) Received: by mail-wr0-x243.google.com with SMTP id k62so2042732wrc.9 for ; Fri, 03 Nov 2017 03:17:13 -0700 (PDT) Received: from localhost.localdomain ([105.129.222.2]) by smtp.gmail.com with ESMTPSA id w18sm5331408wra.30.2017.11.03.03.17.09 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Fri, 03 Nov 2017 03:17:10 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2a00:1450:400c:c0c::243; helo=mail-wr0-x243.google.com; envelope-from=ard.biesheuvel@linaro.org; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=WFcUzyOY9NOi0CTB2d7ITyqD+bjRTYq0r97pVQOoFrQ=; b=BMEysTRcukvFZaYMv/3al+hNe6Nxs5DCRCzo32Ntso3jkP/eCggPNOJx5xRUOvLRaD g5FqOIHgsi2vy6wwt/QIAcbfqwwmkXtrcky0/TbRAMbTdK6CksPO1HAaD26N2i+3Sf7w 2Tou7D5DHqkICzxLA/2Bzc1DBN34iJtXclIfE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=WFcUzyOY9NOi0CTB2d7ITyqD+bjRTYq0r97pVQOoFrQ=; b=ehIDVxJaL+vw9hCOS98ssDTa1kF0cqa0o+CceRqzLnhm8iwFcmEevJisBrvuboZZug C7K3eq0P8j9jq7/W9xRJkcTjoxui0GQnDoT79MtI6DdS2Oyjky70jIM+osYb+8CYdo/U CkQExVAgOzUdUYqu1fxd/Y7mAF6PU4nQKYZn5hJT5Wk/xGpCJnBoVnS09c/QvX63B6eX 8FsiEmyXE/h8ad7OFn7nAEcp+XfPe2/G6HHFVPcXN2/oMajQNZimtC+5DJ6Gda3xv0D2 5pe0neWqN0OLp2YlVedj65zc5F3J046I/3bxUD8jKEvKUpOHt0vn9Ybwqls87nq+cZxB AI7g== X-Gm-Message-State: AMCzsaU3jhj2TSbkBINqr0SvAvh03IziztPIjGBd3Hc8k5qeL6ToIxKE lBlLRIBs92dPg5ndOKGez0Xr1odp/bY= X-Google-Smtp-Source: ABhQp+TxIVY6z1Dk4E8JmQLSV3Y7o7s6DsWs8ksQID1GL17vb7Mj1zYFp8dYkWbga+CcRbPFPWPjFg== X-Received: by 10.223.136.51 with SMTP id d48mr5245496wrd.150.1509704231181; Fri, 03 Nov 2017 03:17:11 -0700 (PDT) From: Ard Biesheuvel To: edk2-devel@lists.01.org, leif.lindholm@linaro.org, daniel.thompson@linaro.org Date: Fri, 3 Nov 2017 10:16:54 +0000 Message-Id: <20171103101654.30973-4-ard.biesheuvel@linaro.org> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20171103101654.30973-1-ard.biesheuvel@linaro.org> References: <20171103101654.30973-1-ard.biesheuvel@linaro.org> Subject: [edk2] [RFC PATCH edk2-platforms 3/3] Platform/DeveloperBox: wire up RTC support X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Ard Biesheuvel MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" Add the drivers, library resolutions and PCD settings to enable RTC support on DeveloperBox. Also, update PlatformDxe to register the non-discoverable device handles for both I2C controllers. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm --- Platform/Socionext/DeveloperBox/DeveloperBox.dsc = | 8 ++- Platform/Socionext/DeveloperBox/DeveloperBox.fdf = | 5 ++ Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c = | 76 +++++++++++++++++--- Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf = | 6 +- Silicon/Socionext/SynQuacer/Include/Platform/MemoryMap.h = | 8 +++ Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuacerMem= oryInitPeiLib.c | 4 ++ 6 files changed, 96 insertions(+), 11 deletions(-) diff --git a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc b/Platform/So= cionext/DeveloperBox/DeveloperBox.dsc index b558b1f805b4..91898faa6ecc 100644 --- a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc +++ b/Platform/Socionext/DeveloperBox/DeveloperBox.dsc @@ -446,8 +446,7 @@ [Components.common] MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntim= eDxe.inf EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf { - ## TODO - RealTimeClockLib|EmbeddedPkg/Library/TemplateRealTimeClockLib/Templa= teRealTimeClockLib.inf + RealTimeClockLib|Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563= RealTimeClockLib.inf } MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf @@ -627,6 +626,11 @@ [Components.common] =20 Platform/Socionext/DeveloperBox/OsInstallerMenuDxe/OsInstallerMenuDxe.inf =20 + # + # I2C + # + Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.inf + !if $(DO_X86EMU) =3D=3D TRUE # # x86 emulator diff --git a/Platform/Socionext/DeveloperBox/DeveloperBox.fdf b/Platform/So= cionext/DeveloperBox/DeveloperBox.fdf index 19dbcf17c1e1..368bf801e036 100644 --- a/Platform/Socionext/DeveloperBox/DeveloperBox.fdf +++ b/Platform/Socionext/DeveloperBox/DeveloperBox.fdf @@ -236,6 +236,11 @@ [FV.FvMain] =20 INF Platform/Socionext/DeveloperBox/OsInstallerMenuDxe/OsInstallerMenuDx= e.inf =20 + # + # I2C + # + INF Silicon/Socionext/SynQuacer/Drivers/SynQuacerI2cDxe/SynQuacerI2cDxe.= inf + !if $(DO_X86EMU) =3D=3D TRUE # # x86 emulator diff --git a/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c = b/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c index 1d300b15e25b..b39cbc5f5291 100644 --- a/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c +++ b/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c @@ -62,27 +62,61 @@ STATIC EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR mNetsecDesc[] = =3D { } }; =20 +STATIC EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR mI2c0Desc[] =3D { + { + ACPI_ADDRESS_SPACE_DESCRIPTOR, // Desc + sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3, // Len + ACPI_ADDRESS_SPACE_TYPE_MEM, // ResType + 0, // GenFlag + 0, // SpecificFlag + 32, // AddrSpaceGranular= ity + SYNQUACER_I2C0_BASE, // AddrRangeMin + SYNQUACER_I2C0_BASE + SYNQUACER_I2C0_SIZE - 1, // AddrRangeMax + 0, // AddrTranslationOf= fset + SYNQUACER_I2C0_SIZE, // AddrLen + }, { + ACPI_END_TAG_DESCRIPTOR // Desc + } +}; + +STATIC EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR mI2c1Desc[] =3D { + { + ACPI_ADDRESS_SPACE_DESCRIPTOR, // Desc + sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3, // Len + ACPI_ADDRESS_SPACE_TYPE_MEM, // ResType + 0, // GenFlag + 0, // SpecificFlag + 32, // AddrSpaceGranular= ity + SYNQUACER_I2C1_BASE, // AddrRangeMin + SYNQUACER_I2C1_BASE + SYNQUACER_I2C1_SIZE - 1, // AddrRangeMax + 0, // AddrTranslationOf= fset + SYNQUACER_I2C1_SIZE, // AddrLen + }, { + ACPI_END_TAG_DESCRIPTOR // Desc + } +}; + STATIC EFI_STATUS -RegisterNetsec ( - VOID +RegisterDevice ( + IN EFI_GUID *TypeGuid, + IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc, + OUT EFI_HANDLE *Handle ) { NON_DISCOVERABLE_DEVICE *Device; EFI_STATUS Status; - EFI_HANDLE Handle; =20 Device =3D (NON_DISCOVERABLE_DEVICE *)AllocateZeroPool (sizeof (*Device)= ); if (Device =3D=3D NULL) { return EFI_OUT_OF_RESOURCES; } =20 - Device->Type =3D &gNetsecNonDiscoverableDeviceGuid; + Device->Type =3D TypeGuid; Device->DmaType =3D NonDiscoverableDeviceDmaTypeNonCoherent; - Device->Resources =3D mNetsecDesc; + Device->Resources =3D Desc; =20 - Handle =3D NULL; - Status =3D gBS->InstallMultipleProtocolInterfaces (&Handle, + Status =3D gBS->InstallMultipleProtocolInterfaces (Handle, &gEdkiiNonDiscoverableDeviceProtocolGuid, Device, NULL); if (EFI_ERROR (Status)) { @@ -106,6 +140,7 @@ PlatformDxeEntryPoint ( EFI_STATUS Status; VOID *Dtb; UINTN DtbSize; + EFI_HANDLE Handle; =20 Dtb =3D NULL; Status =3D DtPlatformLoadDtb (&Dtb, &DtbSize); @@ -118,5 +153,30 @@ PlatformDxeEntryPoint ( Status)); } =20 - return RegisterNetsec (); + Handle =3D NULL; + Status =3D RegisterDevice (&gNetsecNonDiscoverableDeviceGuid, mNetsecDes= c, + &Handle); + ASSERT_EFI_ERROR (Status); + + Handle =3D NULL; + Status =3D RegisterDevice (&gSynQuacerNonDiscoverableRuntimeI2cMasterGui= d, + mI2c0Desc, &Handle); + ASSERT_EFI_ERROR (Status); + + // + // Install the PCF8563 I2C Master protocol on this handle so the RTC dri= ver + // can identify it as the I2C master it can invoke directly, rather than + // through the I2C driver stack (which cannot be used at runtime) + // + Status =3D gBS->InstallProtocolInterface (&Handle, + &gPcf8563RealTimeClockLibI2cMasterProtolGuid, + EFI_NATIVE_INTERFACE, NULL); + ASSERT_EFI_ERROR (Status); + + Handle =3D NULL; + Status =3D RegisterDevice (&gSynQuacerNonDiscoverableI2cMasterGuid, mI2c= 1Desc, + &Handle); + ASSERT_EFI_ERROR (Status); + + return EFI_SUCCESS; } diff --git a/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.in= f b/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf index 25e6248f1c61..478e0c7d33e9 100644 --- a/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf +++ b/Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf @@ -29,6 +29,7 @@ [Packages] EmbeddedPkg/EmbeddedPkg.dec MdeModulePkg/MdeModulePkg.dec MdePkg/MdePkg.dec + Silicon/NXP/Library/Pcf8563RealTimeClockLib/Pcf8563RealTimeClockLib.dec Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec Silicon/Socionext/SynQuacer/SynQuacer.dec =20 @@ -43,9 +44,12 @@ [LibraryClasses] [Guids] gFdtTableGuid gNetsecNonDiscoverableDeviceGuid + gSynQuacerNonDiscoverableI2cMasterGuid + gSynQuacerNonDiscoverableRuntimeI2cMasterGuid =20 [Protocols] - gEdkiiNonDiscoverableDeviceProtocolGuid ## PRODUCES + gEdkiiNonDiscoverableDeviceProtocolGuid ## PRODUCES + gPcf8563RealTimeClockLibI2cMasterProtolGuid ## PRODUCES =20 [FixedPcd] gSynQuacerTokenSpaceGuid.PcdNetsecEepromBase diff --git a/Silicon/Socionext/SynQuacer/Include/Platform/MemoryMap.h b/Sil= icon/Socionext/SynQuacer/Include/Platform/MemoryMap.h index 1ccd3122cdda..49795f97602c 100644 --- a/Silicon/Socionext/SynQuacer/Include/Platform/MemoryMap.h +++ b/Silicon/Socionext/SynQuacer/Include/Platform/MemoryMap.h @@ -42,6 +42,14 @@ #define SYNQUACER_GPIO_BASE 0x51000000 #define SYNQUACER_GPIO_SIZE SIZE_4KB =20 +// I2C0 block +#define SYNQUACER_I2C0_BASE 0x51200000 +#define SYNQUACER_I2C0_SIZE SIZE_4KB + +// I2C1 block +#define SYNQUACER_I2C1_BASE 0x51210000 +#define SYNQUACER_I2C1_SIZE SIZE_4KB + // eMMC(SDH30) #define SYNQUACER_EMMC_BASE 0x52300000 #define SYNQUACER_EMMC_BASE_SZ SIZE_4KB diff --git a/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/= SynQuacerMemoryInitPeiLib.c b/Silicon/Socionext/SynQuacer/Library/SynQuacer= MemoryInitPeiLib/SynQuacerMemoryInitPeiLib.c index be9e28d2ff49..c8c940f27917 100644 --- a/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuac= erMemoryInitPeiLib.c +++ b/Silicon/Socionext/SynQuacer/Library/SynQuacerMemoryInitPeiLib/SynQuac= erMemoryInitPeiLib.c @@ -82,6 +82,10 @@ STATIC CONST ARM_MEMORY_REGION_DESCRIPTOR mVirtualMemory= Table[] =3D { ARM_DEVICE_REGION (FixedPcdGet32 (PcdNetsecEepromBase), SYNQUACER_EEPROM_BASE_SZ), =20 + // SynQuacer I2C + ARM_DEVICE_REGION (SYNQUACER_I2C0_BASE, SYNQUACER_I2C0_SIZE), + ARM_DEVICE_REGION (SYNQUACER_I2C1_BASE, SYNQUACER_I2C1_SIZE), + // SynQuacer NETSEC ARM_DEVICE_REGION (SYNQUACER_NETSEC_BASE, SYNQUACER_NETSEC_BASE_SZ), =20 --=20 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel