https://bugzilla.tianocore.org/show_bug.cgi?id=799
Based on content from the following branch/commit:
https://github.com/Microsoft/MS_UEFI/tree/share/MsCapsuleSupport
https://github.com/Microsoft/MS_UEFI/commit/33bab4031a417d7d5a7d356c15a14c2e60302b2d
Add new Boot Logo 2 Protocol that adds a GetBootLogo()
service that can be used to retrieve the GOP BLT buffer,
location, and size of the boot logo that was previously
registered with the SetBootLogo() service.
The Boot Logo 2 Protocol service GetBootLogo() is amended
to return the pointer to the GOP BLT buffer previously
registered with the SetBootLogo() service.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
---
MdeModulePkg/Include/Protocol/BootLogo2.h | 114 ++++++++++++++++++++++++++++++
MdeModulePkg/MdeModulePkg.dec | 3 +
2 files changed, 117 insertions(+)
create mode 100644 MdeModulePkg/Include/Protocol/BootLogo2.h
diff --git a/MdeModulePkg/Include/Protocol/BootLogo2.h b/MdeModulePkg/Include/Protocol/BootLogo2.h
new file mode 100644
index 0000000000..91318c8adb
--- /dev/null
+++ b/MdeModulePkg/Include/Protocol/BootLogo2.h
@@ -0,0 +1,114 @@
+/**
+Boot Logo 2 Protocol is used to convey information of Logo dispayed during boot.
+
+Copyright (c) 2016, Microsoft Corporation
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+1. Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+**/
+
+#ifndef _BOOT_LOGO2_H_
+#define _BOOT_LOGO2_H_
+
+#include <Protocol/GraphicsOutput.h>
+
+#define EDKII_BOOT_LOGO2_PROTOCOL_GUID \
+ { \
+ 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } \
+ }
+
+//
+// Forward reference for pure ANSI compatability
+//
+typedef struct _EDKII_BOOT_LOGO2_PROTOCOL EDKII_BOOT_LOGO2_PROTOCOL;
+
+/**
+ Update information of logo image drawn on screen.
+
+ @param[in] This The pointer to the Boot Logo protocol 2 instance.
+ @param[in] BltBuffer The BLT buffer for logo drawn on screen. If BltBuffer
+ is set to NULL, it indicates that logo image is no
+ longer on the screen.
+ @param[in] DestinationX X coordinate of destination for the BltBuffer.
+ @param[in] DestinationY Y coordinate of destination for the BltBuffer.
+ @param[in] Width Width of rectangle in BltBuffer in pixels.
+ @param[in] Height Hight of rectangle in BltBuffer in pixels.
+
+ @retval EFI_SUCCESS The boot logo information was updated.
+ @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
+ @retval EFI_OUT_OF_RESOURCES The logo information was not updated due to
+ insufficient memory resources.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_SET_BOOT_LOGO2)(
+ IN EDKII_BOOT_LOGO2_PROTOCOL *This,
+ IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer OPTIONAL,
+ IN UINTN DestinationX,
+ IN UINTN DestinationY,
+ IN UINTN Width,
+ IN UINTN Height
+ );
+
+/**
+ Get the location of the boot logo on the screen.
+
+ @param[in] This The pointer to the Boot Logo Protocol 2 instance
+ @param[out] BltBuffer Returns pointer to the GOP BLT buffer that was
+ previously registered with SetBootLogo2(). The
+ buffer returned must not be modified or freed.
+ @param[out] DestinationX Returns the X start position of the GOP BLT buffer
+ that was previously registers with SetBootLogo2().
+ @param[out] DestinationY Returns the Y start position of the GOP BLT buffer
+ that was previously registers with SetBootLogo2().
+ @param[out] Width Returns the width of the GOP BLT buffer
+ that was previously registers with SetBootLogo2().
+ @param[out] Height Returns the height of the GOP BLT buffer
+ that was previously registers with SetBootLogo2().
+
+ @retval EFI_SUCCESS The location of the boot logo was returned.
+ @retval EFI_NOT_READY The boot logo has not been set.
+ @retval EFI_INVALID_PARAMETER BltBuffer is NULL.
+ @retval EFI_INVALID_PARAMETER DestinationX is NULL.
+ @retval EFI_INVALID_PARAMETER DestinationY is NULL.
+ @retval EFI_INVALID_PARAMETER Width is NULL.
+ @retval EFI_INVALID_PARAMETER Height is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_GET_BOOT_LOGO2)(
+ IN EDKII_BOOT_LOGO2_PROTOCOL *This,
+ OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL **BltBuffer,
+ OUT UINTN *DestinationX,
+ OUT UINTN *DestinationY,
+ OUT UINTN *Width,
+ OUT UINTN *Height
+ );
+
+struct _EDKII_BOOT_LOGO2_PROTOCOL {
+ EDKII_SET_BOOT_LOGO2 SetBootLogo;
+ EDKII_GET_BOOT_LOGO2 GetBootLogo;
+};
+
+extern EFI_GUID gEdkiiBootLogo2ProtocolGuid;
+
+#endif
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 455979386e..ba0585936b 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -538,6 +538,9 @@ [Protocols]
## Include/Protocol/BootLogo.h
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
+ # Include/Protocol/BootLogo2.h
+ gEdkiiBootLogo2ProtocolGuid = { 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } }
+
## Include/Protocol/DisplayProtocol.h
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
--
2.14.2.windows.3
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.