From nobody Wed Dec 25 02:03:10 2024 Delivered-To: importer@patchew.org Authentication-Results: mx.zohomail.com; dkim=fail; spf=none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) smtp.mailfrom=edk2-devel-bounces@lists.01.org Return-Path: Received: from ml01.01.org (ml01.01.org [198.145.21.10]) by mx.zohomail.com with SMTPS id 15094087499511.765441190161937; Mon, 30 Oct 2017 17:12:29 -0700 (PDT) Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 3E6B22034AB2B; Mon, 30 Oct 2017 17:08:37 -0700 (PDT) Received: from EUR03-VE1-obe.outbound.protection.outlook.com (mail-oln040092072072.outbound.protection.outlook.com [40.92.72.72]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id AC8532034AB20 for ; Mon, 30 Oct 2017 17:08:34 -0700 (PDT) Received: from AM5EUR03FT024.eop-EUR03.prod.protection.outlook.com (10.152.16.59) by AM5EUR03HT199.eop-EUR03.prod.protection.outlook.com (10.152.17.183) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384) id 15.20.178.5; Tue, 31 Oct 2017 00:12:23 +0000 Received: from AM4PR06MB1491.eurprd06.prod.outlook.com (10.152.16.60) by AM5EUR03FT024.mail.protection.outlook.com (10.152.16.175) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.20.178.5 via Frontend Transport; Tue, 31 Oct 2017 00:12:23 +0000 Received: from AM4PR06MB1491.eurprd06.prod.outlook.com ([fe80::9832:5b5d:f01b:7030]) by AM4PR06MB1491.eurprd06.prod.outlook.com ([fe80::9832:5b5d:f01b:7030%14]) with mapi id 15.20.0178.012; Tue, 31 Oct 2017 00:12:23 +0000 X-Original-To: edk2-devel@lists.01.org Received-SPF: none (zoho.com: 198.145.21.10 is neither permitted nor denied by domain of lists.01.org) client-ip=198.145.21.10; envelope-from=edk2-devel-bounces@lists.01.org; helo=ml01.01.org; Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=40.92.72.72; helo=eur03-ve1-obe.outbound.protection.outlook.com; envelope-from=marvin.haeuser@outlook.com; receiver=edk2-devel@lists.01.org DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version; bh=fNnaxSyJRlRnUgP5xBPoHy1rGtKxiYToopaSMJWiR3Q=; b=VVE3FxnDChs/kdcAKG+uMB6Gc6sNrZDtg8DLJd5tsEoaao8p1XsZ+hCIChHwG1ebVWB6/6cSXAyzp/bTxUvqkuOSDpEO131ocda7x+3TZsTSVNuNm/P92cKuD73erdCqLehm4kGEQf6eOcXQJNsGuDtxKVljQr9xP2yGv6Oo0VfJV120fK2CBmTJclE5fFL1cbaAG9NAIyDmnh7qXsGgUwOARsv1p99LXIBsbhJVVzJmzi8yJ+2YSyz4nRqID827EAcpErYd3X2//WlNtch6dC8Yl9iL8W5QeSPyPRx5KeXAWCt1xUEjDwiwL8R0rQvpLSDEd1TQL6tP8okQIMbG1w== From: =?iso-8859-1?Q?Marvin_H=E4user?= To: "edk2-devel@lists.01.org" Thread-Topic: [PATCH v2] MdePkg: Add definitions for the SPI protocols introduced in PI 1.6. Thread-Index: AQHTUdzsaWYALPb150iW7CfFOGVTJg== Date: Tue, 31 Oct 2017 00:12:22 +0000 Message-ID: Accept-Language: de-DE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: authentication-results: lists.01.org; dkim=none (message not signed) header.d=none;lists.01.org; dmarc=none action=none header.from=outlook.com; x-incomingtopheadermarker: OriginalChecksum:90A10FC0C0FBE82685BEBA15BE83AFC59BF4E12F6CC68AD63D990D872727D57F; UpperCasedChecksum:1D8534EF93A76B37BD614F1762E01BB5002F5916E50CC95818E0144AD0F2CE4D; SizeAsReceived:7250; Count:45 x-ms-exchange-messagesentrepresentingtype: 1 x-tmn: [zk6guo68aJaa6KOh2C+15ngEKCiucLV9] x-ms-publictraffictype: Email x-microsoft-exchange-diagnostics: 1; AM5EUR03HT199; 6:nTZIa/Nwos5sV60bZTJwkv9tYkt+8GPZUCR+UsiO3D+eTTfFmKhuSBz5bw+zzaXjVTffuTG6mcgLfD9bJPAS6yFA+7xca++OcaV5NcXFYWfHzFYefpPJD5HQUMpIK+ZcE7gQb0Tnz1P3B8ro4Ug34hgMZ9wZtaN75KHCfnVY1Ec4m6p3sjvyVHxh21UJejr5ooq9j/AIUzgILXnS7QllE7ba4/CTE/wlJcA5wwsiz58A4NBM032yzl5ojjaPeFMn7JHL8clfKXTAwwOhqYgLiRNuh9oUPWsg0Rup95lSZ+l5BnZ5ERQH2qjfOFQWwhCeNdd9z6+UXWK7hmgL35g5gSVyxVOg5e90dtJ66/CB85Q=; 5:Xu1i64DucFwBWogWxkVWqTkDMu9fe94Ft+C+DUkxa8gfWHJPbcoz/qO04NjFTyFpl6qK5/ofWrrbOj22xPs+zkenI4411c8sVEyjLMmMUEGfaf8zPkLJ6VlQ/aFyCn3vaaSdyYPF/Lqeqfk5hrn5wReJWqVdGCl4/X6HWQcwADQ=; 24:xhNFXPjrvpW51eubOuQQ6msFPquP4l/+QVPcOqg6hIvYzbjN90izkSm96x54sJdxVUtPogGH75XDXQ+MHyS74KDwcXcAWCd0XGKWKWbVpa4=; 7:MT8KC4IIIo49lCQqr3GQSGpW6zForzxurpVOWVWDTa9AZOFGManaNO0GdNsDvUMEg/+RQ+uL1QSEIvqShLXciY3LE7IxJUk4L9n8c9kvHmN9KQudci2XaEQHu6oKFwFjeYTsfhZe8zOFh5W0NYzqB3cwUyOvrGd1b29XYQ9Ji7iL9LiCjF1xdD0XGPhK00gIyGLJRN8rnufQMCJiPYE6V7T7WNai6+zgZfumaCSnGTasEfGorkmsE1JXEHFyIpNm x-incomingheadercount: 45 x-eopattributedmessage: 0 x-ms-office365-filtering-correlation-id: f308b6b5-4b17-4546-4c23-08d51ff40e2f x-microsoft-antispam: UriScan:; BCL:0; PCL:0; RULEID:(22001)(201702061074)(5061506573)(5061507331)(1603103135)(2017031320274)(2017031324274)(2017031323274)(2017031322404)(1603101448)(1601125374)(1701031045); SRVR:AM5EUR03HT199; x-ms-traffictypediagnostic: AM5EUR03HT199: x-exchange-antispam-report-test: UriScan:(192374486261705)(189930954265078)(788757137089); x-exchange-antispam-report-cfa-test: BCL:0; PCL:0; RULEID:(100000700101)(100105000095)(100000701101)(100105300095)(100000702101)(100105100095)(444000031); SRVR:AM5EUR03HT199; BCL:0; PCL:0; RULEID:(100000800101)(100110000095)(100000801101)(100110300095)(100000802101)(100110100095)(100000803101)(100110400095)(100000804101)(100110200095)(100000805101)(100110500095); SRVR:AM5EUR03HT199; x-forefront-prvs: 04772EA191 x-forefront-antispam-report: SFV:NSPM; SFS:(7070007)(98901004); DIR:OUT; SFP:1901; SCL:1; SRVR:AM5EUR03HT199; H:AM4PR06MB1491.eurprd06.prod.outlook.com; FPR:; SPF:None; LANG:; spamdiagnosticoutput: 1:99 spamdiagnosticmetadata: NSPM MIME-Version: 1.0 X-OriginatorOrg: outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: f308b6b5-4b17-4546-4c23-08d51ff40e2f X-MS-Exchange-CrossTenant-originalarrivaltime: 31 Oct 2017 00:12:23.0443 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Internet X-MS-Exchange-CrossTenant-id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM5EUR03HT199 Subject: [edk2] [PATCH v2] MdePkg: Add definitions for the SPI protocols introduced in PI 1.6. X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: "ruiyu.ni@intel.com" , "dandan.bi@intel.com" , "michael.d.kinney@intel.com" , "liming.gao@intel.com" Content-Transfer-Encoding: quoted-printable Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" X-ZohoMail-DKIM: fail (Header signature does not verify) X-ZohoMail: RDKM_2 RSF_4 Z_629925259 SPT_0 Content-Type: text/plain; charset="utf-8" This commit adds header files for the SPI protocols introduced in the UEFI PI 1.6 specification, as well as their GUIDs to MdePkg.dec. EFI_SPI_TRANSACTION_TYPE assumes an enum with its members ordered the way they are listed in the specification, as there are no values given explicitely. EFI_LEGACY_SPI_CONTROLLER_GUID assumes the character 'l' used in the specification was meant to be '1'. V2: - Fixed LegacySpiFlash.h's header guard. - Fixed LegacySpiSmmController's GUID name. - Removed EFI_SPI_NOR_FLASH_PROTOCOL_LF_READ_DATA as it's unused. - Added the missing SpiSmmNorFlash header. - Fixed all file endings to be CRLF. - Removed trailing whitespaces. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marvin Haeuser Reviewed-by: Dandan Bi --- MdePkg/Include/Protocol/LegacySpiController.h | 265 ++++++++++++++++++ MdePkg/Include/Protocol/LegacySpiFlash.h | 201 ++++++++++++++ MdePkg/Include/Protocol/LegacySpiSmmController.h | 36 +++ MdePkg/Include/Protocol/LegacySpiSmmFlash.h | 36 +++ MdePkg/Include/Protocol/SpiConfiguration.h | 293 ++++++++++++++++++++ MdePkg/Include/Protocol/SpiHc.h | 194 +++++++++++++ MdePkg/Include/Protocol/SpiIo.h | 292 +++++++++++++++++++ MdePkg/Include/Protocol/SpiNorFlash.h | 262 +++++++++++++++++ MdePkg/Include/Protocol/SpiSmmConfiguration.h | 36 +++ MdePkg/Include/Protocol/SpiSmmHc.h | 36 +++ MdePkg/Include/Protocol/SpiSmmNorFlash.h | 36 +++ MdePkg/MdePkg.dec | 34 +++ 12 files changed, 1721 insertions(+) diff --git a/MdePkg/Include/Protocol/LegacySpiController.h b/MdePkg/Include= /Protocol/LegacySpiController.h new file mode 100644 index 000000000000..7f6b07ec42e9 --- /dev/null +++ b/MdePkg/Include/Protocol/LegacySpiController.h @@ -0,0 +1,265 @@ +/** @file + This file defines the Legacy SPI Controller Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __LEGACY_SPI_CONTROLLER_PROTOCOL_H__ +#define __LEGACY_SPI_CONTROLLER_PROTOCOL_H__ + +/// +/// Note: The UEFI PI 1.6 specification uses the character 'l' in the GUID +/// definition. This definition assumes it was supposed to be '1'. +/// +/// Global ID for the Legacy SPI Controller Protocol +/// +#define EFI_LEGACY_SPI_CONTROLLER_GUID \ + { 0x39136fc7, 0x1a11, 0x49de, \ + { 0xbf, 0x35, 0x0e, 0x78, 0xdd, 0xb5, 0x24, 0xfc }} + +typedef +struct _EFI_LEGACY_SPI_CONTROLLER_PROTOCOL +EFI_LEGACY_SPI_CONTROLLER_PROTOCOL; + +/** + Set the erase block opcode. + + This routine must be called at or below TPL_NOTIFY. + The menu table contains SPI transaction opcodes which are accessible aft= er + the legacy SPI flash controller's configuration is locked. The board lay= er + specifies the erase block size for the SPI NOR flash part. The SPI NOR f= lash + peripheral driver selects the erase block opcode which matches the erase + block size and uses this API to load the opcode into the opcode menu tab= le. + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PRO= TOCOL + structure. + @param[in] EraseBlockOpcode Erase block opcode to be placed into the op= code + menu table. + + @retval EFI_SUCCESS The opcode menu table was updated + @retval EFI_ACCESS_ERROR The SPI controller is locked + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_ERASE_BLOCK_OPCODE) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This, + IN UINT8 EraseBlockOpcode + ); + +/** + Set the write status prefix opcode. + + This routine must be called at or below TPL_NOTIFY. + The prefix table contains SPI transaction write prefix opcodes which are + accessible after the legacy SPI flash controller's configuration is lock= ed. + The board layer specifies the write status prefix opcode for the SPI NOR + flash part. The SPI NOR flash peripheral driver uses this API to load the + opcode into the prefix table. + + @param[in] This Pointer to an + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL structu= re. + @param[in] WriteStatusPrefix Prefix opcode for the write status command. + + @retval EFI_SUCCESS The prefix table was updated + @retval EFI_ACCESS_ERROR The SPI controller is locked + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_WRITE_STATUS_PREFIX) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This, + IN UINT8 WriteStatusPrefix + ); + +/** + Set the BIOS base address. + + This routine must be called at or below TPL_NOTIFY. + The BIOS base address works with the protect range registers to protect + portions of the SPI NOR flash from erase and write operat ions. The BIOS + calls this API prior to passing control to the OS loader. + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PROT= OCOL + structure. + @param[in] BiosBaseAddress The BIOS base address. + + @retval EFI_SUCCESS The BIOS base address was properly set + @retval EFI_ACCESS_ERROR The SPI controller is locked + @retval EFI_INVALID_PARAMETER The BIOS base address is greater than + This->Maxi.mumOffset + @retval EFI_UNSUPPORTED The BIOS base address was already set + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_BIOS_BASE_ADDRESS) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This, + IN UINT32 BiosBaseAddress + ); + +/** + Clear the SPI protect range registers. + + This routine must be called at or below TPL_NOTIFY. + The BIOS uses this routine to set an initial condition on the SPI protect + range registers. + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PROTOCOL struct= ure. + + @retval EFI_SUCCESS The registers were successfully cleared + @retval EFI_ACCESS_ERROR The SPI controller is locked + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_CLEAR_SPI_PROTECT) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This + ); + +/** + Determine if the SPI range is protected. + + This routine must be called at or below TPL_NOTIFY. + The BIOS uses this routine to verify a range in the SPI is protected. + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PROTO= COL + structure. + @param[in] BiosAddress Address within a 4 KiB block to start protect= ing. + @param[in] BytesToProtect The number of 4 KiB blocks to protect. + + @retval TRUE The range is protected + @retval FALSE The range is not protected + +**/ +typedef +BOOLEAN +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_IS_RANGE_PROTECTED) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This, + IN UINT32 BiosAddress, + IN UINT32 BlocksToProtect + ); + +/** + Set the next protect range register. + + This routine must be called at or below TPL_NOTIFY. + The BIOS sets the protect range register to prevent write and erase + operations to a portion of the SPI NOR flash device. + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PROT= OCOL + structure. + @param[in] BiosAddress Address within a 4 KiB block to start protec= ting. + @param[in] BlocksToProtect The number of 4 KiB blocks to protect. + + @retval EFI_SUCCESS The register was successfully updated + @retval EFI_ACCESS_ERROR The SPI controller is locked + @retval EFI_INVALID_PARAMETER BiosAddress < This->BiosBaseAddress, or + BlocksToProtect * 4 KiB + > This->MaximumRangeBytes, or + BiosAddress - This->BiosBaseAddress + + (BlocksToProtect * 4 KiB) + > This->MaximumRangeBytes + @retval EFI_OUT_OF_RESOURCES No protect range register available + @retval EFI_UNSUPPORTED Call This->SetBaseAddress because the BIOS= base + address is not set + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_PROTECT_NEXT_RANGE) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This, + IN UINT32 BiosAddress, + IN UINT32 BlocksToProtect + ); + +/** + Lock the SPI controller configuration. + + This routine must be called at or below TPL_NOTIFY. + This routine locks the SPI controller's configuration so that the softwa= re + is no longer able to update: + * Prefix table + * Opcode menu + * Opcode type table + * BIOS base address + * Protect range registers + + @param[in] This Pointer to an EFI_LEGACY_SPI_CONTROLLER_PROTOCOL struct= ure. + + @retval EFI_SUCCESS The SPI controller was successfully locked + @retval EFI_ALREADY_STARTED The SPI controller was already locked + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_LOCK_CONTROLLER) ( + IN CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *This + ); + +/// +/// Support the extra features of the legacy SPI flash controller. +/// +struct _EFI_LEGACY_SPI_CONTROLLER_PROTOCOL { + /// + /// Maximum offset from the BIOS base address that is able to be protect= ed. + /// + UINT32 MaximumOffset; + + /// + /// Maximum number of bytes that can be protected by one range register. + /// + UINT32 MaximumRangeBytes; + + /// + /// The number of registers available for protecting the BIOS. + /// + UINT32 RangeRegisterCoun= t; + + /// + /// Set the erase block opcode. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_ERASE_BLOCK_OPCODE EraseBlockOpcode; + + /// + /// Set the write status prefix opcode. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_WRITE_STATUS_PREFIX WriteStatusPrefix; + + /// + /// Set the BIOS base address. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_BIOS_BASE_ADDRESS BiosBaseAddress; + + /// + /// Clear the SPI protect range registers. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_CLEAR_SPI_PROTECT ClearSpiProtect; + + /// + /// Determine if the SPI range is protected. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_IS_RANGE_PROTECTED IsRangeProtected; + + /// + /// Set the next protect range register. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_PROTECT_NEXT_RANGE ProtectNextRange; + + /// + /// Lock the SPI controller configuration. + /// + EFI_LEGACY_SPI_CONTROLLER_PROTOCOL_LOCK_CONTROLLER LockController; +}; + +extern EFI_GUID gEfiLegacySpiControllerProtocolGuid; + +#endif // __LEGACY_SPI_CONTROLLER_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/LegacySpiFlash.h b/MdePkg/Include/Prot= ocol/LegacySpiFlash.h new file mode 100644 index 000000000000..b627c193d198 --- /dev/null +++ b/MdePkg/Include/Protocol/LegacySpiFlash.h @@ -0,0 +1,201 @@ +/** @file + This file defines the Legacy SPI Flash Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __LEGACY_SPI_FLASH_PROTOCOL_H__ +#define __LEGACY_SPI_FLASH_PROTOCOL_H__ + +#include + +/// +/// Global ID for the Legacy SPI Flash Protocol +/// +#define EFI_LEGACY_SPI_FLASH_PROTOCOL_GUID \ + { 0xf01bed57, 0x04bc, 0x4f3f, \ + { 0x96, 0x60, 0xd6, 0xf2, 0xea, 0x22, 0x82, 0x59 }} + +typedef struct _EFI_LEGACY_SPI_FLASH_PROTOCOL EFI_LEGACY_SPI_FLASH_PROTOCO= L; + +/** + Set the BIOS base address. + + This routine must be called at or below TPL_NOTIFY. + The BIOS base address works with the protect range registers to protect + portions of the SPI NOR flash from erase and write operat ions. + The BIOS calls this API prior to passing control to the OS loader. + + @param[in] This Pointer to an EFI_LEGACY_SPI_FLASH_PROTOCOL = data + structure. + @param[in] BiosBaseAddress The BIOS base address. + + @retval EFI_SUCCESS The BIOS base address was properly set + @retval EFI_ACCESS_ERROR The SPI controller is locked + @retval EFI_INVALID_PARAMETER BiosBaseAddress > This->MaximumOffset + @retval EFI_UNSUPPORTED The BIOS base address was already set or = not a + legacy SPI host controller + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_FLASH_PROTOCOL_BIOS_BASE_ADDRESS) ( + IN CONST EFI_LEGACY_SPI_FLASH_PROTOCOL *This, + IN UINT32 BiosBaseAddress + ); + +/** + Clear the SPI protect range registers. + + This routine must be called at or below TPL_NOTIFY. + The BIOS uses this routine to set an initial condition on the SPI protect + range registers. + + @param[in] This Pointer to an EFI_LEGACY_SPI_FLASH_PROTOCOL data struct= ure. + + @retval EFI_SUCCESS The registers were successfully cleared + @retval EFI_ACCESS_ERROR The SPI controller is locked + @retval EFI_UNSUPPORTED Not a legacy SPI host controller + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_FLASH_PROTOCOL_CLEAR_SPI_PROTECT) ( + IN CONST EFI_LEGACY_SPI_FLASH_PROTOCOL *This + ); + +/** + Determine if the SPI range is protected. + + This routine must be called at or below TPL_NOTIFY. + The BIOS uses this routine to verify a range in the SPI is protected. + + @param[in] This Pointer to an EFI_LEGACY_SPI_FLASH_PROTOCOL = data + structure. + @param[in] BiosAddress Address within a 4 KiB block to start protec= ting. + @param[in] BlocksToProtect The number of 4 KiB blocks to protect. + + @retval TRUE The range is protected + @retval FALSE The range is not protected + +**/ +typedef +BOOLEAN +(EFIAPI *EFI_LEGACY_SPI_FLASH_PROTOCOL_IS_RANGE_PROTECTED) ( + IN CONST EFI_LEGACY_SPI_FLASH_PROTOCOL *This, + IN UINT32 BiosAddress, + IN UINT32 BlocksToProtect + ); + +/** + Set the next protect range register. + + This routine must be called at or below TPL_NOTIFY. + The BIOS sets the protect range register to prevent write and erase + operations to a portion of the SPI NOR flash device. + + @param[in] This Pointer to an EFI_LEGACY_SPI_FLASH_PROTOCOL = data + structure. + @param[in] BiosAddress Address within a 4 KiB block to start protec= ting. + @param[in] BlocksToProtect The number of 4 KiB blocks to protect. + + @retval EFI_SUCCESS The register was successfully updated + @retval EFI_ACCESS_ERROR The SPI controller is locked + @retval EFI_INVALID_PARAMETER BiosAddress < This->BiosBaseAddress, or + @retval EFI_INVALID_PARAMETER BlocksToProtect * 4 KiB + > This->MaximumRangeBytes, or + BiosAddress - This->BiosBaseAddress + + (BlocksToProtect * 4 KiB) + > This->MaximumRangeBytes + @retval EFI_OUT_OF_RESOURCES No protect range register available + @retval EFI_UNSUPPORTED Call This->SetBaseAddress because the BIOS + base address is not set Not a legacy SPI = host + controller + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_FLASH_PROTOCOL_PROTECT_NEXT_RANGE) ( + IN CONST EFI_LEGACY_SPI_FLASH_PROTOCOL *This, + IN UINT32 BiosAddress, + IN UINT32 BlocksToProtect + ); + +/** + Lock the SPI controller configuration. + + This routine must be called at or below TPL_NOTIFY. + This routine locks the SPI controller's configuration so that the softwa= re is + no longer able to update: + * Prefix table + * Opcode menu + * Opcode type table + * BIOS base address + * Protect range registers + + @param[in] This Pointer to an EFI_LEGACY_SPI_FLASH_PROTOCOL data struct= ure. + + @retval EFI_SUCCESS The SPI controller was successfully locked + @retval EFI_ALREADY_STARTED The SPI controller was already locked + @retval EFI_UNSUPPORTED Not a legacy SPI host controller +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_LEGACY_SPI_FLASH_PROTOCOL_LOCK_CONTROLLER) ( + IN CONST EFI_LEGACY_SPI_FLASH_PROTOCOL *This + ); + +/// +/// The EFI_LEGACY_SPI_FLASH_PROTOCOL extends the EFI_SPI_NOR_FLASH_PROTOC= OL +/// with APls to support the legacy SPI flash controller. +/// +struct _EFI_LEGACY_SPI_FLASH_PROTOCOL { + /// + /// This protocol manipulates the SPI NOR flash parts using a common set= of + /// commands. + /// + EFI_SPI_NOR_FLASH_PROTOCOL FlashProtocol; + + // + // Legacy flash (SPI host) controller support + // + + /// + /// Set the BIOS base address. + /// + EFI_LEGACY_SPI_FLASH_PROTOCOL_BIOS_BASE_ADDRESS BiosBaseAddress; + + /// + /// Clear the SPI protect range registers. + /// + EFI_LEGACY_SPI_FLASH_PROTOCOL_CLEAR_SPI_PROTECT ClearSpiProtect; + + /// + /// Determine if the SPI range is protected. + /// + EFI_LEGACY_SPI_FLASH_PROTOCOL_IS_RANGE_PROTECTED IsRangeProtected; + + /// + /// Set the next protect range register. + /// + EFI_LEGACY_SPI_FLASH_PROTOCOL_PROTECT_NEXT_RANGE ProtectNextRange; + + /// + /// Lock the SPI controller configuration. + /// + EFI_LEGACY_SPI_FLASH_PROTOCOL_LOCK_CONTROLLER LockController; +}; + +extern EFI_GUID gEfiLegacySpiFlashProtocolGuid; + +#endif // __LEGACY_SPI_FLASH_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/LegacySpiSmmController.h b/MdePkg/Incl= ude/Protocol/LegacySpiSmmController.h new file mode 100644 index 000000000000..fc32f88afdf1 --- /dev/null +++ b/MdePkg/Include/Protocol/LegacySpiSmmController.h @@ -0,0 +1,36 @@ +/** @file + This file defines the Legacy SPI SMM Controler Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __LEGACY_SPI_SMM_CONTROLLER_PROTOCOL_H__ +#define __LEGACY_SPI_SMM_CONTROLLER_PROTOCOL_H__ + +#include + +/// +/// Global ID for the Legacy SPI SMM Controller Protocol +/// +#define EFI_LEGACY_SPI_SMM_CONTROLLER_PROTOCOL_GUID \ + { 0x62331b78, 0xd8d0, 0x4c8c, \ + { 0x8c, 0xcb, 0xd2, 0x7d, 0xfe, 0x32, 0xdb, 0x9b }} + +typedef +struct _EFI_LEGACY_SPI_CONTROLLER_PROTOCOL +EFI_LEGACY_SPI_SMM_CONTROLLER_PROTOCOL; + +extern EFI_GUID gEfiLegacySpiSmmControllerProtocolGuid; + +#endif // __LEGACY_SPI_SMM_CONTROLLER_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/LegacySpiSmmFlash.h b/MdePkg/Include/P= rotocol/LegacySpiSmmFlash.h new file mode 100644 index 000000000000..d16619511b0f --- /dev/null +++ b/MdePkg/Include/Protocol/LegacySpiSmmFlash.h @@ -0,0 +1,36 @@ +/** @file + This file defines the Legacy SPI SMM Flash Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __LEGACY_SPI_SMM_FLASH_PROTOCOL_H__ +#define __LEGACY_SPI_SMM_FLASH_PROTOCOL_H__ + +#include + +/// +/// Global ID for the Legacy SPI SMM Flash Protocol +/// +#define EFI_LEGACY_SPI_SMM_FLASH_PROTOCOL_GUID \ + { 0x5e3848d4, 0x0db5, 0x4fc0, \ + { 0x97, 0x29, 0x3f, 0x35, 0x3d, 0x4f, 0x87, 0x9f }} + +typedef +struct _EFI_LEGACY_SPI_FLASH_PROTOCOL +EFI_LEGACY_SPI_SMM_FLASH_PROTOCOL; + +extern EFI_GUID gEfiLegacySpiSmmFlashProtocolGuid; + +#endif // __SPI_SMM_FLASH_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/SpiConfiguration.h b/MdePkg/Include/Pr= otocol/SpiConfiguration.h new file mode 100644 index 000000000000..c0df183ec7f0 --- /dev/null +++ b/MdePkg/Include/Protocol/SpiConfiguration.h @@ -0,0 +1,293 @@ +/** @file + This file defines the SPI Configuration Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_CONFIGURATION_PROTOCOL_H__ +#define __SPI_CONFIGURATION_PROTOCOL_H__ + +/// +/// Global ID for the SPI Configuration Protocol +/// +#define EFI_SPI_CONFIGURATION_GUID \ + { 0x85a6d3e6, 0xb65b, 0x4afc, \ + { 0xb3, 0x8f, 0xc6, 0xd5, 0x4a, 0xf6, 0xdd, 0xc8 }} + +/// +/// Macros to easily specify frequencies in hertz, kilohertz and megahertz. +/// +#define Hz(Frequency) (Frequency) +#define KHz(Frequency) (1000 * Hz (Frequency)) +#define MHz(Frequency) (1000 * KHz (Frequency)) + +typedef struct _EFI_SPI_PERIPHERAL EFI_SPI_PERIPHERAL; + +/** + Manipulate the chip select for a SPI device. + + This routine must be called at or below TPL_NOTIFY. + Update the value of the chip select line for a SPI peripheral. + The SPI bus layer calls this routine either in the board layer or in the= SPI + controller to manipulate the chip select pin at the start and end of a S= PI + transaction. + + @param[in] SpiPeripheral The address of an EFI_SPI_PERIPHERAL data stru= cture + describing the SPI peripheral whose chip selec= t pin + is to be manipulated. The routine may access t= he + ChipSelectParameter field to gain sufficient + context to complete the operation. + @param[in] PinValue The value to be applied to the chip select lin= e of + the SPI peripheral. + + @retval EFI_SUCCESS The chip select was set successfully + @retval EFI_NOT_READY Support for the chip select is not proper= ly + initialized + @retval EFI_INVALID_PARAMETER The SpiPeripheral->ChipSelectParameter va= lue + is invalid + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_CHIP_SELECT) ( + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral, + IN BOOLEAN PinValue + ); + +/** + Set up the clock generator to produce the correct clock frequency, phase= and + polarity for a SPI chip. + + This routine must be called at or below TPL_NOTIFY. + This routine updates the clock generator to generate the correct frequen= cy + and polarity for the SPI clock. + + @param[in] SpiPeripheral Pointer to a EFI_SPI_PERIPHERAL data structure= from + which the routine can access the ClockParamete= r, + ClockPhase and ClockPolarity fields. The routi= ne + also has access to the names for the SPI bus a= nd + chip which can be used during debugging. + @param[in] ClockHz Pointer to the requested clock frequency. The = clock + generator will choose a supported clock freque= ncy + which is less then or equal to this value. + Specify zero to turn the clock generator off. + The actual clock frequency supported by the cl= ock + generator will be returned. + + @retval EFI_SUCCESS The clock was set up successfully + @retval EFI_UNSUPPORTED The SPI controller was not able to support the + frequency requested by CLockHz + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_SPI_CLOCK) ( + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral, + IN UINT32 *ClockHz + ); + +/// +/// The EFI_SPI_PART data structure provides a description of a SPI part w= hich +/// is independent of the use on the board. This data is available directly +/// from the part's datasheet and may be provided by the vendor. +/// +typedef struct _EFI_SPI_PART { + /// + /// A Unicode string specifying the SPI chip vendor. + /// + CONST CHAR16 *Vendor; + + /// + /// A Unicode string specifying the SPI chip part number. + /// + CONST CHAR16 *PartNumber; + + /// + /// The minimum SPI bus clock frequency used to access this chip. This v= alue + /// may be specified in the chip's datasheet. If not, use the value of z= ero. + /// + UINT32 MinClockHz; + + /// + /// The maximum SPI bus clock frequency used to access this chip. This v= alue + /// is found in the chip's datasheet. + /// + UINT32 MaxClockHz; + + /// + /// Specify the polarity of the chip select pin. This value can be found= in + /// the SPI chip's datasheet. Specify TRUE when a one asserts the chip s= elect + ///and FALSE when a zero asserts the chip select. + /// + BOOLEAN ChipSelectPolarity; +} EFI_SPI_PART; + +/// +/// The EFI_SPI_BUS data structure provides the connection details between= the +/// physical SPI bus and the EFI_SPI_HC_PROTOCOL instance which controls t= hat +/// SPI bus. This data structure also describes the details of how the clo= ck is +/// generated for that SPI bus. Finally this data structure provides the l= ist +/// of physical SPI devices which are attached to the SPI bus. +/// +typedef struct _EFI_SPI_BUS { + /// + /// A Unicode string describing the SPI bus + /// + CONST CHAR16 *FriendlyName; + + /// + /// Address of the first EFI_SPI_PERIPHERAL data structure connected to = this + /// bus. Specify NULL if there are no SPI peripherals connected to this = bus. + /// + CONST EFI_SPI_PERIPHERAL *Peripherallist; + + /// + /// Address of an EFI_DEVICE_PATH_PROTOCOL data structure which uniquely + /// describes the SPI controller. + /// + CONST EFI_DEVICE_PATH_PROTOCOL *ControllerPath; + + /// + /// Address of the routine which controls the clock used by the SPI bus = for + /// this SPI peripheral. The SPI host co ntroller's clock routine is cal= led + /// when this value is set to NULL. + /// + EFI_SPI_CLOCK Clock; + + /// + /// Address of a data structure containing the additional values which + /// describe the necessary control for the clock. When Clock is NULL, + /// the declaration for this data structure is provided by the vendor of= the + /// host's SPI controller driver. When Clock is not NULL, the declaratio= n for + /// this data structure is provided by the board layer. + /// + VOID *ClockParameter; +} EFI_SPI_BUS; + +/// +/// The EFI_SPI_PERIPHERAL data structure describes how a specific block of +/// logic which is connected to the SPI bus. This data structure also sele= cts +/// which upper level driver is used to manipulate this SPI device. +/// The SpiPeripheraLDriverGuid is available from the vendor of the SPI +/// peripheral driver. +/// +struct _EFI_SPI_PERIPHERAL { + /// + /// Address of the next EFI_SPI_PERIPHERAL data structure. Specify NULL = if + /// the current data structure is the last one on the SPI bus. + /// + CONST EFI_SPI_PERIPHERAL *NextSpiPeripheral; + + /// + /// A unicode string describing the function of the SPI part. + /// + CONST CHAR16 *FriendlyName; + + /// + /// Address of a GUID provided by the vendor of the SPI peripheral drive= r. + /// Instead of using a " EFI_SPI_IO_PROTOCOL" GUID, the SPI bus driver u= ses + /// this GUID to identify an EFI_SPI_IO_PROTOCOL data structure and to + /// provide the connection points for the SPI peripheral drivers. + /// This reduces the comparison logic in the SPI peripheral driver's + /// Supported routine. + /// + CONST GUID *SpiPeripheralDriverGuid; + + /// + /// The address of an EFI_SPI_PART data structure which describes this c= hip. + /// + CONST EFI_SPI_PART *SpiPart; + + /// + /// The maximum clock frequency is specified in the EFI_SPI_P ART. When = this + /// this value is non-zero and less than the value in the EFI_SPI_PART t= hen + /// this value is used for the maximum clock frequency for the SPI part. + /// + UINT32 MaxClockHz; + + /// + /// Specify the idle value of the clock as found in the datasheet. + /// Use zero (0) if the clock'S idle value is low or one (1) if the the + /// clock's idle value is high. + /// + BOOLEAN ClockPolarity; + + /// + /// Specify the clock delay after chip select. Specify zero (0) to delay= an + /// entire clock cycle or one (1) to delay only half a clock cycle. + /// + BOOLEAN ClockPhase; + + /// + /// SPI peripheral attributes, select zero or more of: + /// * SPI_PART_SUPPORTS_2_B1T_DATA_BUS_W1DTH - The SPI peripheral is wir= ed to + /// support a 2-bit data bus + /// * SPI_PART_SUPPORTS_4_B1T_DATA_BUS_W1DTH - The SPI peripheral is wir= ed to + /// support a 4-bit data bus + /// + UINT32 Attributes; + + /// + /// Address of a vendor specific data structure containing additional bo= ard + /// configuration details related to the SPI chip. The SPI peripheral la= yer + /// uses this data structure when configuring the chip. + /// + CONST VOID *ConfigurationData; + + /// + /// The address of an EFI_SPI_BUS data structure which describes the SPI= bus + /// to which this chip is connected. + /// + CONST EFI_SPI_BUS *SpiBus; + + /// + /// Address of the routine which controls the chip select pin for this S= PI + /// peripheral. Call the SPI host controller's chip select routine when = this + /// value is set to NULL. + /// + EFI_SPI_CHIP_SELECT ChipSelect; + + /// + /// Address of a data structure containing the additional values which + /// describe the necessary control for the chip select. When ChipSelect = is + /// NULL, the declaration for this data structure is provided by the ven= dor + /// of the host's SPI controller driver. The vendor's documentation spec= ifies + /// the necessary values to use for the chip select pin selection and + /// control. When Chipselect is not NULL, the declaration for this data + /// structure is provided by the board layer. + /// + VOID *ChipSelectParameter; +}; + +/// +/// Describe the details of the board's SPI busses to the SPI driver stack. +/// The board layer uses the EFI_SPI_CONFIGURATION_PROTOCOL to expose the = data +/// tables which describe the board's SPI busses, The SPI bus layer uses t= hese +/// tables to configure the clock, chip select and manage the SPI transact= ions +/// on the SPI controllers. +/// +typedef struct _EFI_SPI_CONFIGURATION_PROTOCOL { + /// + /// The number of SPI busses on the board. + /// + UINT32 BusCount; + + /// + /// The address of an array of EFI_SPI_BUS data structure addresses. + /// + CONST EFI_SPI_BUS *CONST *CONST Buslist; +} EFI_SPI_CONFIGURATION_PROTOCOL; + +extern EFI_GUID gEfiSpiConfigurationProtocolGuid; + +#endif // __SPI_CONFIGURATION_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/SpiHc.h b/MdePkg/Include/Protocol/SpiH= c.h new file mode 100644 index 000000000000..12fe5d2dce0a --- /dev/null +++ b/MdePkg/Include/Protocol/SpiHc.h @@ -0,0 +1,194 @@ +/** @file + This file defines the SPI Host Controller Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_HC_PROTOCOL_H__ +#define __SPI_HC_PROTOCOL_H__ + +#include +#include + +/// +/// Global ID for the SPI Host Controller Protocol +/// +#define EFI_SPI_HOST_GUID \ + { 0xc74e5db2, 0xfa96, 0x4ae2, \ + { 0xb3, 0x99, 0x15, 0x97, 0x7f, 0xe3, 0x0, 0x2d }} + +/// +/// EDK2-style name +/// +#define EFI_SPI_HC_PROTOCOL_GUID EFI_SPI_HOST_GUID + +typedef struct _EFI_SPI_HC_PROTOCOL EFI_SPI_HC_PROTOCOL; + +/** + Assert or deassert the SPI chip select. + + This routine is called at TPL_NOTIFY. + Update the value of the chip select line for a SPI peripheral. The SPI b= us + layer calls this routine either in the board layer or in the SPI control= ler + to manipulate the chip select pin at the start and end of a SPI transact= ion. + + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure. + @param[in] SpiPeripheral The address of an EFI_SPI_PERIPHERAL data stru= cture + describing the SPI peripheral whose chip selec= t pin + is to be manipulated. The routine may access t= he + ChipSelectParameter field to gain sufficient + context to complete the operati on. + @param[in] PinValue The value to be applied to the chip select lin= e of + the SPI peripheral. + + @retval EFI_SUCCESS The chip select was set as requested + @retval EFI_NOT_READY Support for the chip select is not proper= ly + initialized + @retval EFI_INVALID_PARAMETER The ChipSeLect value or its contents are + invalid + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_SPI_HC_PROTOCOL_CHIP_SELECT) ( + IN CONST EFI_SPI_HC_PROTOCOL *This, + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral, + IN BOOLEAN PinValue + ); + +/** + Set up the clock generator to produce the correct clock frequency, phase= and + polarity for a SPI chip. + + This routine is called at TPL_NOTIFY. + This routine updates the clock generator to generate the correct frequen= cy + and polarity for the SPI clock. + + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure. + @param[in] SpiPeripheral Pointer to a EFI_SPI_PERIPHERAL data structure= from + which the routine can access the ClockParamete= r, + ClockPhase and ClockPolarity fields. The routi= ne + also has access to the names for the SPI bus a= nd + chip which can be used during debugging. + @param[in] ClockHz Pointer to the requested clock frequency. The = SPI + host controller will choose a supported clock + frequency which is less then or equal to this + value. Specify zero to turn the clock generator + off. The actual clock frequency supported by t= he + SPI host controller will be returned. + + @retval EFI_SUCCESS The clock was set up successfully + @retval EFI_UNSUPPORTED The SPI controller was not able to support the + frequency requested by ClockHz + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_SPI_HC_PROTOCOL_CLOCK) ( + IN CONST EFI_SPI_HC_PROTOCOL *This, + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral, + IN UINT32 *ClockHz + ); + +/** + Perform the SPI transaction on the SPI peripheral using the SPI host + controller. + + This routine is called at TPL_NOTIFY. + This routine synchronously returns EFI_SUCCESS indicating that the + asynchronous SPI transaction was started. The routine then waits for + completion of the SPI transaction prior to returning the final transacti= on + status. + + @param[in] This Pointer to an EFI_SPI_HC_PROTOCOL structure. + @param[in] BusTransaction Pointer to a EFI_SPI_BUS_ TRANSACTION contain= ing + the description of the SPI transaction to per= form. + + @retval EFI_SUCCESS The transaction completed successfully + @retval EFI_BAD_BUFFER_SIZE The BusTransaction->WriteBytes value is inv= alid, + or the BusTransaction->ReadinBytes value is + invalid + @retval EFI_UNSUPPORTED The BusTransaction-> Transaction Type is + unsupported + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_SPI_HC_PROTOCOL_TRANSACTION) ( + IN CONST EFI_SPI_HC_PROTOCOL *This, + IN EFI_SPI_BUS_TRANSACTION *BusTransaction + ); + +/// +/// Support a SPI data transaction between the SPI controller and a SPI ch= ip. +/// +struct _EFI_SPI_HC_PROTOCOL { + /// + /// Host control attributes, may have zero or more of the following set: + /// * HC_SUPPORTS_WRITE_ONLY_OPERATIONS + /// * HC_SUPPORTS_READ_ONLY_OPERATIONS + /// * HC_SUPPORTS_WRITE_THEN_READ_OPERATIONS + /// * HC_TX_FRAME_IN_MOST_SIGNIFICANT_BITS + /// - The SPI host controller requires the transmit frame to be in most + /// significant bits instead of least significant bits.The host driv= er + /// will adjust the frames if necessary. + /// * HC_RX_FRAME_IN_MOST_SIGNIFICANT_BITS + /// - The SPI host controller places the receive frame to be in most + /// significant bits instead of least significant bits.The host driv= er + /// will adjust the frames to be in the least significant bits if + /// necessary. + /// * HC_SUPPORTS_2_BIT_DATA_BUS_W1DTH + /// - The SPI controller supports a 2 - bit data bus + /// * HC_SUPPORTS_4_B1T_DATA_BUS_WIDTH + /// - The SPI controller supports a 4 - bit data bus + /// * HC_TRANSFER_SIZE_INCLUDES_OPCODE + /// - Transfer size includes the opcode byte + /// * HC_TRANSFER_SIZE_INCLUDES_ADDRESS + /// - Transfer size includes the 3 address bytes + /// The SPI host controller must support full - duplex (receive while + /// sending) operation.The SPI host controller must support a 1 - bit bus + /// width. + /// + UINT32 Attributes; + + /// + /// Mask of frame sizes which the SPI host controller supports. Frame si= ze of + /// N-bits is supported when bit N-1 is set. The host controller must su= pport + /// a frame size of 8-bits. + /// + UINT32 FrameSizeSupportMask; + + /// + /// Maximum transfer size in bytes: 1 - Oxffffffff + /// + UINT32 MaximumTransferBytes; + + /// + /// Assert or deassert the SPI chip select. + /// + EFI_SPI_HC_PROTOCOL_CHIP_SELECT ChipSelect; + + /// + /// Set up the clock generator to produce the correct clock frequency, p= hase + /// and polarity for a SPI chip. + /// + EFI_SPI_HC_PROTOCOL_CLOCK Clock; + + /// + /// Perform the SPI transaction on the SPI peripheral using the SPI host + /// controller. + /// + EFI_SPI_HC_PROTOCOL_TRANSACTION Transaction; +}; + +extern EFI_GUID gEfiSpiHcProtocolGuid; + +#endif // __SPI_HC_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/SpiIo.h b/MdePkg/Include/Protocol/SpiI= o.h new file mode 100644 index 000000000000..43e804518f8b --- /dev/null +++ b/MdePkg/Include/Protocol/SpiIo.h @@ -0,0 +1,292 @@ +/** @file + This file defines the SPI I/O Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_IO_PROTOCOL_H__ +#define __SPI_IO_PROTOCOL_H__ + +#include +#include + +typedef struct _EFI_SPI_IO_PROTOCOL EFI_SPI_IO_PROTOCOL; + +/// +/// Note: The UEFI PI 1.6 specification does not specify values for the +/// members below. The order matches the specification. +/// +typedef enum { + /// + /// Data flowing in both direction between the host and + /// SPI peripheral.ReadBytes must equal WriteBytes and both ReadBuffer a= nd + /// WriteBuffer must be provided. + /// + SPI_TRANSACTION_FULL_DUPLEX, + + /// + /// Data flowing from the host to the SPI peripheral.ReadBytes must be + /// zero.WriteBytes must be non - zero and WriteBuffer must be provided. + /// + SPI_TRANSACTION_WRITE_ONLY, + + /// + /// Data flowing from the SPI peripheral to the host.WriteBytes must be + /// zero.ReadBytes must be non - zero and ReadBuffer must be provided. + /// + SPI_TRANSACTION_READ_ONLY, + + /// + /// Data first flowing from the host to the SPI peripheral and then data + /// flows from the SPI peripheral to the host.These types of operations = get + /// used for SPI flash devices when control data (opcode, address) must = be + /// passed to the SPI peripheral to specify the data to be read. + /// + SPI_TRANSACTION_WRITE_THEN_READ +} EFI_SPI_TRANSACTION_TYPE; + +/** + Initiate a SPI transaction between the host and a SPI peripheral. + + This routine must be called at or below TPL_NOTIFY. + This routine works with the SPI bus layer to pass the SPI transaction to= the + SPI controller for execution on the SPI bus. There are four types of + supported transactions supported by this routine: + * Full Duplex: WriteBuffer and ReadBuffer are the same size. + * Write Only: WriteBuffer contains data for SPI peripheral, ReadBytes = =3D 0 + * Read Only: ReadBuffer to receive data from SPI peripheral, WriteBytes = =3D 0 + * Write Then Read: WriteBuffer contains control data to write to SPI + peripheral before data is placed into the ReadBuffer. + Both WriteBytes and ReadBytes must be non-zero. + + @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structur= e. + @param[in] TransactionType Type of SPI transaction. + @param[in] DebugTransaction Set TRUE only when debugging is desired. + Debugging may be turned on for a single SPI + transaction. Only this transaction will di= splay + debugging messages. All other transactions= with + this value set to FALSE will not display a= ny + debugging messages. + @param[in] ClockHz Specify the ClockHz value as zero (0) to u= se + the maximum clock frequency supported by t= he + SPI controller and part. Specify a non-zero + value only when a specific SPI transaction + requires a reduced clock rate. + @param[in] BusWidth Width of the SPI bus in bits: 1, 2, 4 + @param[in] FrameSize Frame size in bits, range: 1 - 32 + @param[in] WriteBytes The length of the WriteBuffer in bytes. + Specify zero for read-only operations. + @param[in] WriteBuffer The buffer containing data to be sent from= the + host to the SPI chip. Specify NULL for read + only operations. + * Frame sizes 1-8 bits: UINT8 (one byte) p= er + frame + * Frame sizes 7-16 bits: UINT16 (two bytes= ) per + frame + * Frame sizes 17-32 bits: UINT32 (four byt= es) + per frame The transmit frame is in the l= east + significant N bits. + @param[in] ReadBytes The length of the ReadBuffer in bytes. + Specify zero for write-only operations. + @param[out] ReadBuffer The buffer to receeive data from the SPI c= hip + during the transaction. Specify NULL for w= rite + only operations. + * Frame sizes 1-8 bits: UINT8 (one byte) p= er + frame + * Frame sizes 7-16 bits: UINT16 (two bytes= ) per + frame + * Frame sizes 17-32 bits: UINT32 (four byt= es) + per frame The received frame is in the l= east + significant N bits. + + @retval EFI_SUCCESS The SPI transaction completed successfully + @retval EFI_BAD_BUFFER_SIZE The writeBytes value was invalid + @retval EFI_BAD_BUFFER_SIZE The ReadBytes value was invalid + @retval EFI_INVALID_PARAMETER TransactionType is not valid, + or BusWidth not supported by SPI peripher= al or + SPI host controller, + or WriteBytes non-zero and WriteBuffer is + NULL, + or ReadBytes non-zero and ReadBuffer is N= ULL, + or ReadBuffer !=3D WriteBuffer for full-d= uplex + type, + or WriteBuffer was NULL, + or TPL is too high + @retval EFI_OUT_OF_RESOURCES Insufficient memory for SPI transaction + @retval EFI_UNSUPPORTED The FrameSize is not supported by the SPI= bus + layer or the SPI host controller + @retval EFI_UNSUPPORTED The SPI controller was not able to support + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_IO_PROTOCOL_TRANSACTION) ( + IN CONST EFI_SPI_IO_PROTOCOL *This, + IN EFI_SPI_TRANSACTION_TYPE TransactionType, + IN BOOLEAN DebugTransaction, + IN UINT32 ClockHz OPTIONAL, + IN UINT32 BusWidth, + IN UINT32 FrameSize, + IN UINT32 WriteBytes, + IN UINT8 *WriteBuffer, + IN UINT32 ReadBytes, + OUT UINT8 *ReadBuffer + ); + +/** + Update the SPI peripheral associated with this SPI 10 instance. + + Support socketed SPI parts by allowing the SPI peripheral driver to repl= ace + the SPI peripheral after the connection is made. An example use is socke= ted + SPI NOR flash parts, where the size and parameters change depending upon + device is in the socket. + + @param[in] This Pointer to an EFI_SPI_IO_PROTOCOL structure. + @param[in] SpiPeripheral Pointer to an EFI_SPI_PERIPHERAL structure. + + @retval EFI_SUCCESS The SPI peripheral was updated successful= ly + @retval EFI_INVALID_PARAMETER The SpiPeripheral value is NULL, + or the SpiPeripheral->SpiBus is NULL, + or the SpiP eripheral - >SpiBus pointing = at + wrong bus, + or the SpiP eripheral - >SpiPart is NULL + +**/ +typedef EFI_STATUS +(EFIAPI *EFI_SPI_IO_PROTOCOL_UPDATE_SPI_PERIPHERAL) ( + IN CONST EFI_SPI_IO_PROTOCOL *This, + IN CONST EFI_SPI_PERIPHERAL *SpiPeripheral + ); + +/// +/// The EFI_SPI_BUS_ TRANSACTION data structure contains the description o= f the +/// SPI transaction to perform on the host controller. +/// +typedef struct _EFI_SPI_BUS_TRANSACTION { + /// + /// Pointer to the SPI peripheral being manipulated. + /// + CONST EFI_SPI_PERIPHERAL *SpiPeripheral; + + /// + /// Type of transaction specified by one of the EFI_SPI_TRANSACTION_TYPE + /// values. + /// + EFI_SPI_TRANSACTION_TYPE TransactionType; + + /// + /// TRUE if the transaction is being debugged. Debugging may be turned o= n for + /// a single SPI transaction. Only this transaction will display debuggi= ng + /// messages. All other transactions with this value set to FALSE will n= ot + /// display any debugging messages. + /// + BOOLEAN DebugTransaction; + + /// + /// SPI bus width in bits: 1, 2, 4 + /// + UINT32 BusWidth; + + /// + /// Frame size in bits, range: 1 - 32 + /// + UINT32 FrameSize; + + /// + /// Length of the write buffer in bytes + /// + UINT32 WriteBytes; + + /// + /// Buffer containing data to send to the SPI peripheral + /// Frame sizes 1 - 8 bits: UINT8 (one byte) per frame + /// Frame sizes 7 - 16 bits : UINT16 (two bytes) per frame + /// + UINT8 *WriteBuffer; + + /// + /// Length of the read buffer in bytes + /// + UINT32 ReadBytes; + + /// + /// Buffer to receive the data from the SPI peripheral + /// * Frame sizes 1 - 8 bits: UINT8 (one byte) per frame + /// * Frame sizes 7 - 16 bits : UINT16 (two bytes) per frame + /// * Frame sizes 17 - 32 bits : UINT32 (four bytes) per frame + /// + UINT8 *ReadBuffer; +} EFI_SPI_BUS_TRANSACTION; + +/// +/// Support managed SPI data transactions between the SPI controller and a= SPI +/// chip. +/// +struct _EFI_SPI_IO_PROTOCOL { + /// + /// Address of an EFI_SPI_PERIPHERAL data structure associated with this + /// protocol instance. + /// + CONST EFI_SPI_PERIPHERAL *SpiPeripheral; + + /// + /// Address of the original EFI_SPI_PERIPHERAL data structure associated= with + /// this protocol instance. + /// + CONST EFI_SPI_PERIPHERAL *OriginalSpiPeripheral; + + /// + /// Mask of frame sizes which the SPI 10 layer supports. Frame size of N= -bits + /// is supported when bit N-1 is set. The host controller must support a + /// frame size of 8-bits. Frame sizes of 16, 24 and 32-bits are converte= d to + /// 8-bit frame sizes by the SPI bus layer if the frame size is not supp= orted + /// by the SPI host controller. + /// + UINT32 FrameSizeSupportMask; + + /// + /// Maximum transfer size in bytes: 1 - Oxffffffff + /// + UINT32 MaximumTransferBytes; + + /// + /// Transaction attributes: One or more from: + /// * SPI_10_SUPPORTS_2_B1T_DATA_BUS_W1DTH + /// - The SPI host and peripheral supports a 2-bit data bus + /// * SPI_IO_SUPPORTS_4_BIT_DATA_BUS_W1DTH + /// - The SPI host and peripheral supports a 4-bit data bus + /// * SPI_IO_TRANSFER_SIZE_INCLUDES_OPCODE + /// - Transfer size includes the opcode byte + /// * SPI_IO_TRANSFER_SIZE_INCLUDES_ADDRESS + /// - Transfer size includes the 3 address bytes + /// + UINT32 Attributes; + + /// + /// Pointer to legacy SPI controller protocol + /// + CONST EFI_LEGACY_SPI_CONTROLLER_PROTOCOL *LegacySpiProtocol; + + /// + /// Initiate a SPI transaction between the host and a SPI peripheral. + /// + EFI_SPI_IO_PROTOCOL_TRANSACTION Transaction; + + /// + /// Update the SPI peripheral associated with this SPI 10 instance. + /// + EFI_SPI_IO_PROTOCOL_UPDATE_SPI_PERIPHERAL UpdateSpiPeripheral; +}; + +#endif // __SPI_IO_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/SpiNorFlash.h b/MdePkg/Include/Protoco= l/SpiNorFlash.h new file mode 100644 index 000000000000..dc8ce0a513cc --- /dev/null +++ b/MdePkg/Include/Protocol/SpiNorFlash.h @@ -0,0 +1,262 @@ +/** @file + This file defines the SPI NOR Flash Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_NOR_FLASH_PROTOCOL_H__ +#define __SPI_NOR_FLASH_PROTOCOL_H__ + +#include + +/// +/// Global ID for the SPI NOR Flash Protocol +/// +#define EFI_SPI_NOR_FLASH_PROTOCOL_GUID \ + { 0xb57ec3fe, 0xf833, 0x4ba6, \ + { 0x85, 0x78, 0x2a, 0x7d, 0x6a, 0x87, 0x44, 0x4b }} + +typedef struct _EFI_SPI_NOR_FLASH_PROTOCOL EFI_SPI_NOR_FLASH_PROTOCOL; + +/** + Read the 3 byte manufacture and device ID from the SPI flash. + + This routine must be called at or below TPL_NOTIFY. + This routine reads the 3 byte manufacture and device ID from the flash p= art + filling the buffer provided. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data struct= ure. + @param[out] Buffer Pointer to a 3 byte buffer to receive the manufactur= e and + device ID. + + + + @retval EFI_SUCCESS The manufacture and device ID was read + successfully. + @retval EFI_INVALID_PARAMETER Buffer is NULL + @retval EFI_DEVICE_ERROR Invalid data received from SPI flash part. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + OUT UINT8 *Buffer + ); + +/** + Read data from the SPI flash. + + This routine must be called at or below TPL_NOTIFY. + This routine reads data from the SPI part in the buffer provided. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data + structure. + @param[in] FlashAddress Address in the flash to start reading + @param[in] LengthInBytes Read length in bytes + @param[out] Buffer Address of a buffer to receive the data + + @retval EFI_SUCCESS The data was read successfully. + @retval EFI_INVALID_PARAMETER Buffer is NULL, or + FlashAddress >=3D This->FlashSize, or + LengthInBytes > This->FlashSize - FlashAd= dress + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + IN UINT32 FlashAddress, + IN UINT32 LengthInBytes, + OUT UINT8 *Buffer + ); + +/** + Read the flash status register. + + This routine must be called at or below TPL_NOTIFY. + This routine reads the flash part status register. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data + structure. + @param[in] LengthInBytes Number of status bytes to read. + @param[out] FlashStatus Pointer to a buffer to receive the flash stat= us. + + @retval EFI_SUCCESS The status register was read successfully. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + IN UINT32 LengthInBytes, + OUT UINT8 *FlashStatus + ); + +/** + Write the flash status register. + + This routine must be called at or below TPL_N OTIFY. + This routine writes the flash part status register. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data + structure. + @param[in] LengthInBytes Number of status bytes to write. + @param[in] FlashStatus Pointer to a buffer containing the new status. + + @retval EFI_SUCCESS The status write was successful. + @retval EFI_OUT_OF_RESOURCES Failed to allocate the write buffer. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + IN UINT32 LengthInBytes, + IN UINT8 *FlashStatus + ); + +/** + Write data to the SPI flash. + + This routine must be called at or below TPL_NOTIFY. + This routine breaks up the write operation as necessary to write the dat= a to + the SPI part. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data + structure. + @param[in] FlashAddress Address in the flash to start writing + @param[in] LengthInBytes Write length in bytes + @param[in] Buffer Address of a buffer containing the data + + @retval EFI_SUCCESS The data was written successfully. + @retval EFI_INVALID_PARAMETER Buffer is NULL, or + FlashAddress >=3D This->FlashSize, or + LengthInBytes > This->FlashSize - FlashAd= dress + @retval EFI_OUT_OF_RESOURCES Insufficient memory to copy buffer. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + IN UINT32 FlashAddress, + IN UINT32 LengthInBytes, + IN UINT8 *Buffer + ); + +/** + Efficiently erases one or more 4KiB regions in the SPI flash. + + This routine must be called at or below TPL_NOTIFY. + This routine uses a combination of 4 KiB and larger blocks to erase the + specified area. + + @param[in] This Pointer to an EFI_SPI_NOR_FLASH_PROTOCOL data + structure. + @param[in] FlashAddress Address within a 4 KiB block to start erasing + @param[in] BlockCount Number of 4 KiB blocks to erase + + @retval EFI_SUCCESS The erase was completed successfully. + @retval EFI_INVALID_PARAMETER FlashAddress >=3D This->FlashSize, or + BlockCount * 4 KiB + > This->FlashSize - FlashAddress + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_SPI_NOR_FLASH_PROTOCOL_ERASE) ( + IN CONST EFI_SPI_NOR_FLASH_PROTOCOL *This, + IN UINT32 FlashAddress, + IN UINT32 BlockCount + ); + +/// +/// The EFI_SPI_NOR_FLASH_PROTOCOL exists in the SPI peripheral layer. +/// This protocol manipulates the SPI NOR flash parts using a common set of +/// commands. The board layer provides the interconnection and configurati= on +/// details for the SPI NOR flash part. The SPI NOR flash driver uses this +/// configuration data to expose a generic interface which provides the +/// following APls: +/// * Read manufacture and device ID +/// * Read data +/// * Read data using low frequency +/// * Read status +/// * Write data +/// * Erase 4 KiB blocks +/// * Erase 32 or 64 KiB blocks +/// * Write status +/// The EFI_SPI_NOR_FLASH_PROTOCOL also exposes some APls to set the secur= ity +/// features on the legacy SPI flash controller. +/// +struct _EFI_SPI_NOR_FLASH_PROTOCOL { + /// + /// Pointer to an EFI_SPI_PERIPHERAL data structure + /// + CONST EFI_SPI_PERIPHERAL *SpiPeripheral; + + /// + /// Flash size in bytes + /// + UINT32 FlashSize; + + /// + /// Manufacture and Device ID + /// + UINT8 Deviceid[3]; + + /// + /// Erase block size in bytes + /// + UINT32 EraseBlockBytes; + + /// + /// Read the 3 byte manufacture and device ID from the SPI flash. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_GET_FLASH_ID GetFlashid; + + /// + /// Read data from the SPI flash. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA ReadData; + + /// + /// Low frequency read data from the SPI flash. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_READ_DATA LfReadData; + + /// + /// Read the flash status register. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_READ_STATUS ReadStatus; + + /// + /// Write the flash status register. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_STATUS WriteStatus; + + /// + /// Write data to the SPI flash. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_WRITE_DATA WriteData; + + /// + /// Efficiently erases one or more 4KiB regions in the SPI flash. + /// + EFI_SPI_NOR_FLASH_PROTOCOL_ERASE Erase; +}; + +extern EFI_GUID gEfiSpiNorFlashProtocolGuid; + +#endif // __SPI_NOR_FLASH_PROTOCOL_H__ diff --git a/MdePkg/Include/Protocol/SpiSmmConfiguration.h b/MdePkg/Include= /Protocol/SpiSmmConfiguration.h new file mode 100644 index 000000000000..822a63ae1540 --- /dev/null +++ b/MdePkg/Include/Protocol/SpiSmmConfiguration.h @@ -0,0 +1,36 @@ +/** @file + This file defines the SPI SMM Configuration Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_SMM_CONFIGURATION_PROTOCOL_H__ +#define __SPI_SMM_CONFIGURATION_PROTOCOL_H__ + +#include + +/// +/// Global ID for the SPI SMM Configuration Protocol +/// +#define EFI_SPI_SMM_CONFIGURATION_PROTOCOL_GUID \ + { 0x995c6eca, 0x171b, 0x45fd, \ + { 0xa3, 0xaa, 0xfd, 0x4c, 0x9c, 0x9d, 0xef, 0x59 }} + +typedef +struct _EFI_SPI_CONFIGURATION_PROTOCOL +EFI_SPI_SMM_CONFIGURATION_PROTOCOL; + +extern EFI_GUID gEfiSpiSmmConfigurationProtocolGuid; + +#endif // __SPI_SMM_CONFIGURATION_H__ diff --git a/MdePkg/Include/Protocol/SpiSmmHc.h b/MdePkg/Include/Protocol/S= piSmmHc.h new file mode 100644 index 000000000000..178d9907e6a0 --- /dev/null +++ b/MdePkg/Include/Protocol/SpiSmmHc.h @@ -0,0 +1,36 @@ +/** @file + This file defines the SPI SMM Host Controller Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_SMM_HC_H__ +#define __SPI_SMM_HC_H__ + +#include + +/// +/// Global ID for the SPI SMM Host Controller Protocol +/// +#define EFI_SPI_SMM_HC_PROTOCOL_GUID \ + { 0xe9f02217, 0x2093, 0x4470, \ + { 0x8a, 0x54, 0x5c, 0x2c, 0xff, 0xe7, 0x3e, 0xcb }} + +typedef +struct _EFI_SPI_HC_PROTOCOL +EFI_SPI_SMM_HC_PROTOCOL; + +extern EFI_GUID gEfiSpiSmmHcProtocolGuid; + +#endif // __SPI_SMM_HC_H__ diff --git a/MdePkg/Include/Protocol/SpiSmmNorFlash.h b/MdePkg/Include/Prot= ocol/SpiSmmNorFlash.h new file mode 100644 index 000000000000..0242668d83dc --- /dev/null +++ b/MdePkg/Include/Protocol/SpiSmmNorFlash.h @@ -0,0 +1,36 @@ +/** @file + This file defines the SPI SMM NOR Flash Protocol. + + Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD + License which accompanies this distribution. The full text of the licens= e may + be found at http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMP= LIED. + + @par Revision Reference: + This Protocol was introduced in UEFI PI Specification 1.6. + +**/ + +#ifndef __SPI_SMM_NOR_FLASH_PROTOCOL_H__ +#define __SPI_SMM_NOR_FLASH_PROTOCOL_H__ + +#include + +/// +/// Global ID for the SPI SMM NOR Flash Protocol +/// +#define EFI_SPI_SMM_NOR_FLASH_PROTOCOL_GUID \ + { 0xaab18f19, 0xfe14, 0x4666, \ + { 0x86, 0x04, 0x87, 0xff, 0x6d, 0x66, 0x2c, 0x9a } } + +typedef +struct _EFI_SPI_NOR_FLASH_PROTOCOL +EFI_SPI_SMM_NOR_FLASH_PROTOCOL; + +extern EFI_GUID gEfiSpiSmmNorFlashProtocolGuid; + +#endif // __SPI_SMM_NOR_FLASH_PROTOCOL_H__ diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index 1867c54c3bc1..3e9abdf6b9bc 100644 --- a/MdePkg/MdePkg.dec +++ b/MdePkg/MdePkg.dec @@ -1246,6 +1246,40 @@ [Protocols] gEfiMmCommunicationProtocolGuid =3D { 0xc68ed8e2, 0x9dc6, 0x4cbd, { 0x9= d, 0x94, 0xdb, 0x65, 0xac, 0xc5, 0xc3, 0x32 }} =20 # + # Protocols defined in PI 1.6. + # + + ## Include/Protocol/LegacySpiController.h + gEfiLegacySpiControllerProtocolGuid =3D { 0x39136fc7, 0x1a11, 0x49de,= { 0xbf, 0x35, 0x0e, 0x78, 0xdd, 0xb5, 0x24, 0xfc }} + + ## Include/Protocol/LegacySpiFlash.h + gEfiLegacySpiFlashProtocolGuid =3D { 0xf01bed57, 0x04bc, 0x4f3f,= { 0x96, 0x60, 0xd6, 0xf2, 0xea, 0x22, 0x82, 0x59 }} + + ## Include/Protocol/LegacySpiSmmController.h + gEfiLegacySpiSmmControllerProtocolGuid =3D { 0x62331b78, 0xd8d0, 0x4c8c,= { 0x8c, 0xcb, 0xd2, 0x7d, 0xfe, 0x32, 0xdb, 0x9b }} + + ## Include/Protocol/LegacySpiSmmFlash.h + gEfiLegacySpiSmmFlashProtocolGuid =3D { 0x5e3848d4, 0x0db5, 0x4fc0,= { 0x97, 0x29, 0x3f, 0x35, 0x3d, 0x4f, 0x87, 0x9f }} + + ## Include/Protocol/SpiConfiguration.h + gEfiSpiConfigurationProtocolGuid =3D { 0x85a6d3e6, 0xb65b, 0x4afc,= { 0xb3, 0x8f, 0xc6, 0xd5, 0x4a, 0xf6, 0xdd, 0xc8 }} + + ## Include/Protocol/SpiHc.h + gEfiSpiHcProtocolGuid =3D { 0xc74e5db2, 0xfa96, 0x4ae2,= { 0xb3, 0x99, 0x15, 0x97, 0x7f, 0xe3, 0x0, 0x2d }} + + ## Include/Protocol/SpiNorFlash.h + gEfiSpiNorFlashProtocolGuid =3D { 0xb57ec3fe, 0xf833, 0x4ba6,= { 0x85, 0x78, 0x2a, 0x7d, 0x6a, 0x87, 0x44, 0x4b }} + + ## Include/Protocol/SpiSmmConfiguration.h + gEfiSpiSmmConfigurationProtocolGuid =3D { 0x995c6eca, 0x171b, 0x45fd,= { 0xa3, 0xaa, 0xfd, 0x4c, 0x9c, 0x9d, 0xef, 0x59 }} + + ## Include/Protocol/SpiSmmHc.h + gEfiSpiSmmHcProtocolGuid =3D { 0xe9f02217, 0x2093, 0x4470,= { 0x8a, 0x54, 0x5c, 0x2c, 0xff, 0xe7, 0x3e, 0xcb }} + + ## Include/Protocol/SpiSmmNorFlash.h + gEfiSpiSmmNorFlashProtocolGuid =3D { 0xaab18f19, 0xfe14, 0x4666,= { 0x86, 0x04, 0x87, 0xff, 0x6d, 0x66, 0x2c, 0x9a }} + + # # Protocols defined in UEFI2.1/UEFI2.0/EFI1.1 # =20 --=20 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel