The lack of certain capabilities is going to cause errors pretty
much exclusively when building the QEMU command line, because we
purposefully leave such checks to the very last moments before
starting a guest; so it doesn't make much sense to pass QEMU
capabilities to DO_TEST_PARSE_ERROR() call which are supposed,
as the name implies, to result in much earlier error.
The only exception is the "cpu-hotplug-granularity" test, due
to the fact that the checks we want to fail are skipped entirely
if the relevant QEMU feature is not available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
---
tests/qemuxml2argvtest.c | 184 +++++++++++++----------------------------------
1 file changed, 51 insertions(+), 133 deletions(-)
diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
index c8739909d..2df778853 100644
--- a/tests/qemuxml2argvtest.c
+++ b/tests/qemuxml2argvtest.c
@@ -743,9 +743,7 @@ mymain(void)
DO_TEST("boot-menu-disable-drive-bootindex",
QEMU_CAPS_BOOT_MENU,
QEMU_CAPS_BOOTINDEX);
- DO_TEST_PARSE_ERROR("boot-dev+order",
- QEMU_CAPS_BOOTINDEX,
- QEMU_CAPS_VIRTIO_BLK_SCSI);
+ DO_TEST_PARSE_ERROR("boot-dev+order", NONE);
DO_TEST("boot-order",
QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_VIRTIO_BLK_SCSI);
@@ -959,8 +957,7 @@ mymain(void)
VIR_FREE(driver.config->vxhsTLSx509certdir);
DO_TEST("disk-drive-no-boot",
QEMU_CAPS_BOOTINDEX);
- DO_TEST_PARSE_ERROR("disk-device-lun-type-invalid",
- QEMU_CAPS_VIRTIO_SCSI);
+ DO_TEST_PARSE_ERROR("disk-device-lun-type-invalid", NONE);
DO_TEST_FAILURE("disk-usb-nosupport", NONE);
DO_TEST("disk-usb-device",
QEMU_CAPS_DEVICE_USB_STORAGE,
@@ -1037,17 +1034,10 @@ mymain(void)
QEMU_CAPS_DRIVE_DISCARD,
QEMU_CAPS_DRIVE_DETECT_ZEROES);
DO_TEST("disk-snapshot", NONE);
- DO_TEST_PARSE_ERROR("disk-same-targets",
- QEMU_CAPS_SCSI_LSI,
- QEMU_CAPS_DEVICE_USB_STORAGE, QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("disk-drive-address-conflict",
- QEMU_CAPS_ICH9_AHCI);
- DO_TEST_PARSE_ERROR("disk-hostdev-scsi-address-conflict",
- QEMU_CAPS_VIRTIO_SCSI,
- QEMU_CAPS_DEVICE_SCSI_GENERIC);
- DO_TEST_PARSE_ERROR("hostdevs-drive-address-conflict",
- QEMU_CAPS_VIRTIO_SCSI,
- QEMU_CAPS_DEVICE_SCSI_GENERIC);
+ DO_TEST_PARSE_ERROR("disk-same-targets", NONE);
+ DO_TEST_PARSE_ERROR("disk-drive-address-conflict", NONE);
+ DO_TEST_PARSE_ERROR("disk-hostdev-scsi-address-conflict", NONE);
+ DO_TEST_PARSE_ERROR("hostdevs-drive-address-conflict", NONE);
DO_TEST("event_idx",
QEMU_CAPS_VIRTIO_BLK_EVENT_IDX,
QEMU_CAPS_VIRTIO_NET_EVENT_IDX,
@@ -1060,14 +1050,10 @@ mymain(void)
DO_TEST("disk-serial",
QEMU_CAPS_KVM,
QEMU_CAPS_DRIVE_SERIAL);
- DO_TEST_PARSE_ERROR("disk-fdc-incompatible-address",
- NONE);
- DO_TEST_PARSE_ERROR("disk-ide-incompatible-address",
- NONE);
- DO_TEST_PARSE_ERROR("disk-sata-incompatible-address",
- QEMU_CAPS_ICH9_AHCI);
- DO_TEST_PARSE_ERROR("disk-scsi-incompatible-address",
- QEMU_CAPS_VIRTIO_SCSI);
+ DO_TEST_PARSE_ERROR("disk-fdc-incompatible-address", NONE);
+ DO_TEST_PARSE_ERROR("disk-ide-incompatible-address", NONE);
+ DO_TEST_PARSE_ERROR("disk-sata-incompatible-address", NONE);
+ DO_TEST_PARSE_ERROR("disk-scsi-incompatible-address", NONE);
DO_TEST("graphics-vnc", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
DO_TEST("graphics-vnc-socket", QEMU_CAPS_VNC, QEMU_CAPS_DEVICE_CIRRUS_VGA);
@@ -1396,12 +1382,8 @@ mymain(void)
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD,
QEMU_CAPS_CCID_PASSTHRU);
- DO_TEST_PARSE_ERROR("chardev-reconnect-invalid-timeout",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_CHARDEV_RECONNECT);
- DO_TEST_PARSE_ERROR("chardev-reconnect-generated-path",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_CHARDEV_RECONNECT);
+ DO_TEST_PARSE_ERROR("chardev-reconnect-invalid-timeout", NONE);
+ DO_TEST_PARSE_ERROR("chardev-reconnect-generated-path", NONE);
DO_TEST("usb-controller",
QEMU_CAPS_NODEFCONFIG);
@@ -1419,10 +1401,7 @@ mymain(void)
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION,
QEMU_CAPS_ICH9_USB_EHCI1);
- DO_TEST_PARSE_ERROR("usb-ich9-no-companion",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_PCI_MULTIFUNCTION,
- QEMU_CAPS_ICH9_USB_EHCI1);
+ DO_TEST_PARSE_ERROR("usb-ich9-no-companion", NONE);
DO_TEST("usb-ich9-autoassign",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_PCI_MULTIFUNCTION,
@@ -1437,12 +1416,8 @@ mymain(void)
DO_TEST("usb-hub-autoadd-deluxe",
QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("usb-hub-conflict",
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("usb-hub-nonexistent",
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NODEFCONFIG);
+ DO_TEST_PARSE_ERROR("usb-hub-conflict", NONE);
+ DO_TEST_PARSE_ERROR("usb-hub-nonexistent", NONE);
DO_TEST("usb-port-missing",
QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
@@ -1452,9 +1427,7 @@ mymain(void)
DO_TEST("usb-ports",
QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("usb-ports-out-of-range",
- QEMU_CAPS_USB_HUB,
- QEMU_CAPS_NODEFCONFIG);
+ DO_TEST_PARSE_ERROR("usb-ports-out-of-range", NONE);
DO_TEST("usb-port-autoassign",
QEMU_CAPS_USB_HUB,
QEMU_CAPS_NODEFCONFIG);
@@ -1499,13 +1472,9 @@ mymain(void)
QEMU_CAPS_ICH9_USB_EHCI1);
DO_TEST("usb-none",
QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("usb-none-other",
- QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("usb-none-hub",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_USB_HUB);
- DO_TEST_PARSE_ERROR("usb-none-usbtablet",
- QEMU_CAPS_NODEFCONFIG);
+ DO_TEST_PARSE_ERROR("usb-none-other", NONE);
+ DO_TEST_PARSE_ERROR("usb-none-hub", NONE);
+ DO_TEST_PARSE_ERROR("usb-none-usbtablet", NONE);
DO_TEST("usb-controller-default-q35",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_PCI_OHCI,
@@ -1535,19 +1504,14 @@ mymain(void)
QEMU_CAPS_NEC_USB_XHCI,
QEMU_CAPS_NEC_USB_XHCI_PORTS,
QEMU_CAPS_USB_HUB);
- DO_TEST_PARSE_ERROR("usb-controller-xhci-limit",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_PIIX3_USB_UHCI,
- QEMU_CAPS_NEC_USB_XHCI,
- QEMU_CAPS_NEC_USB_XHCI_PORTS);
+ DO_TEST_PARSE_ERROR("usb-controller-xhci-limit", NONE);
DO_TEST("usb-controller-qemu-xhci", QEMU_CAPS_DEVICE_QEMU_XHCI);
DO_TEST_FAILURE("usb-controller-qemu-xhci-unavailable", NONE);
- DO_TEST_PARSE_ERROR("usb-controller-qemu-xhci-limit",
- QEMU_CAPS_DEVICE_QEMU_XHCI);
+ DO_TEST_PARSE_ERROR("usb-controller-qemu-xhci-limit", NONE);
DO_TEST("smbios", QEMU_CAPS_SMBIOS_TYPE);
- DO_TEST_PARSE_ERROR("smbios-date", QEMU_CAPS_SMBIOS_TYPE);
- DO_TEST_PARSE_ERROR("smbios-uuid-match", QEMU_CAPS_SMBIOS_TYPE);
+ DO_TEST_PARSE_ERROR("smbios-date", NONE);
+ DO_TEST_PARSE_ERROR("smbios-uuid-match", NONE);
DO_TEST("watchdog", NONE);
DO_TEST("watchdog-device", QEMU_CAPS_NODEFCONFIG);
@@ -1601,12 +1565,8 @@ mymain(void)
DO_TEST("hostdev-mdev-precreated",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_DEVICE_VFIO_PCI);
- DO_TEST_PARSE_ERROR("hostdev-mdev-src-address-invalid",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_DEVICE_VFIO_PCI);
- DO_TEST_PARSE_ERROR("hostdev-mdev-invalid-target-address",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_DEVICE_VFIO_PCI);
+ DO_TEST_PARSE_ERROR("hostdev-mdev-src-address-invalid", NONE);
+ DO_TEST_PARSE_ERROR("hostdev-mdev-invalid-target-address", NONE);
DO_TEST_FAILURE("hostdev-vfio-multidomain",
QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_DEVICE_VFIO_PCI);
DO_TEST("pci-rom",
@@ -1695,7 +1655,7 @@ mymain(void)
DO_TEST_FAILURE("luks-disks", QEMU_CAPS_OBJECT_SECRET);
# endif
DO_TEST_PARSE_ERROR("luks-disk-invalid", NONE);
- DO_TEST_PARSE_ERROR("luks-disks-source-both", QEMU_CAPS_OBJECT_SECRET);
+ DO_TEST_PARSE_ERROR("luks-disks-source-both", NONE);
DO_TEST("memtune", NONE);
DO_TEST("memtune-unlimited", NONE);
@@ -1799,8 +1759,7 @@ mymain(void)
DO_TEST("pseries-vio-user-assigned",
QEMU_CAPS_DEVICE_SPAPR_VTY,
QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("pseries-vio-address-clash",
- QEMU_CAPS_NODEFCONFIG);
+ DO_TEST_PARSE_ERROR("pseries-vio-address-clash", NONE);
DO_TEST("pseries-nvram", QEMU_CAPS_DEVICE_NVRAM);
DO_TEST("pseries-usb-kbd", QEMU_CAPS_PCI_OHCI,
QEMU_CAPS_DEVICE_USB_KBD,
@@ -1809,8 +1768,7 @@ mymain(void)
DO_TEST("pseries-cpu-exact",
QEMU_CAPS_DEVICE_SPAPR_VTY,
QEMU_CAPS_NODEFCONFIG);
- DO_TEST_PARSE_ERROR("pseries-no-parallel",
- QEMU_CAPS_NODEFCONFIG);
+ DO_TEST_PARSE_ERROR("pseries-no-parallel", NONE);
qemuTestSetHostArch(driver.caps, VIR_ARCH_PPC64);
DO_TEST("pseries-cpu-compat", QEMU_CAPS_KVM,
@@ -1898,10 +1856,7 @@ mymain(void)
DO_TEST_FAILURE("pseries-hpt-resizing",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_MACHINE_OPT);
- DO_TEST_PARSE_ERROR("pseries-hpt-resizing-invalid-machine",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_MACHINE_OPT,
- QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT);
+ DO_TEST_PARSE_ERROR("pseries-hpt-resizing-invalid-machine", NONE);
DO_TEST("pseries-serial-native",
QEMU_CAPS_NODEFCONFIG,
@@ -2041,9 +1996,7 @@ mymain(void)
QEMU_CAPS_DEVICE_VIRTIO_RNG,
QEMU_CAPS_OBJECT_RNG_EGD,
QEMU_CAPS_OBJECT_RNG_RANDOM);
- DO_TEST_PARSE_ERROR("virtio-rng-egd-crash",
- QEMU_CAPS_DEVICE_VIRTIO_RNG,
- QEMU_CAPS_OBJECT_RNG_EGD);
+ DO_TEST_PARSE_ERROR("virtio-rng-egd-crash", NONE);
DO_TEST("virtio-rng-ccw",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_BOOTINDEX,
@@ -2077,10 +2030,7 @@ mymain(void)
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_CCW,
QEMU_CAPS_VIRTIO_S390);
- DO_TEST_PARSE_ERROR("s390-no-parallel",
- QEMU_CAPS_NODEFCONFIG,
- QEMU_CAPS_VIRTIO_CCW,
- QEMU_CAPS_VIRTIO_S390);
+ DO_TEST_PARSE_ERROR("s390-no-parallel", NONE);
DO_TEST("s390-serial",
QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_VIRTIO_CCW,
@@ -2106,8 +2056,7 @@ mymain(void)
DO_TEST("tpm-passthrough",
QEMU_CAPS_DEVICE_TPM_PASSTHROUGH, QEMU_CAPS_DEVICE_TPM_TIS);
- DO_TEST_PARSE_ERROR("tpm-no-backend-invalid",
- QEMU_CAPS_DEVICE_TPM_PASSTHROUGH, QEMU_CAPS_DEVICE_TPM_TIS);
+ DO_TEST_PARSE_ERROR("tpm-no-backend-invalid", NONE);
DO_TEST_PARSE_ERROR("pci-domain-invalid", NONE);
@@ -2144,14 +2093,8 @@ mymain(void)
QEMU_CAPS_ICH9_USB_EHCI1,
QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
QEMU_CAPS_DEVICE_QXL);
- DO_TEST_PARSE_ERROR("q35-dmi-bad-address1",
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_IOH3420);
- DO_TEST_PARSE_ERROR("q35-dmi-bad-address2",
- QEMU_CAPS_DEVICE_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE,
- QEMU_CAPS_DEVICE_IOH3420);
+ DO_TEST_PARSE_ERROR("q35-dmi-bad-address1", NONE);
+ DO_TEST_PARSE_ERROR("q35-dmi-bad-address2", NONE);
DO_TEST("q35-pm-disable",
QEMU_CAPS_DEVICE_PCI_BRIDGE,
QEMU_CAPS_DEVICE_IOH3420,
@@ -2382,21 +2325,11 @@ mymain(void)
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_HDA_DUPLEX);
- DO_TEST_PARSE_ERROR("q35-wrong-root",
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_ICH9_AHCI,
- QEMU_CAPS_PCI_MULTIFUNCTION, QEMU_CAPS_ICH9_USB_EHCI1,
- QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
- QEMU_CAPS_DEVICE_QXL);
+ DO_TEST_PARSE_ERROR("q35-wrong-root", NONE);
DO_TEST_PARSE_ERROR("440fx-wrong-root", NONE);
DO_TEST_PARSE_ERROR("440fx-ide-address-conflict", NONE);
- DO_TEST_PARSE_ERROR("pcie-root-port-too-many",
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_ICH9_AHCI,
- QEMU_CAPS_PCI_MULTIFUNCTION,
- QEMU_CAPS_DEVICE_VIDEO_PRIMARY,
- QEMU_CAPS_DEVICE_QXL);
+ DO_TEST_PARSE_ERROR("pcie-root-port-too-many", NONE);
DO_TEST("pcie-switch-upstream-port",
QEMU_CAPS_DEVICE_IOH3420,
@@ -2415,26 +2348,17 @@ mymain(void)
DO_TEST("pci-expander-bus",
QEMU_CAPS_DEVICE_PXB);
- DO_TEST_PARSE_ERROR("pci-expander-bus-bad-node",
- QEMU_CAPS_DEVICE_PXB);
- DO_TEST_PARSE_ERROR("pci-expander-bus-bad-machine",
- QEMU_CAPS_DEVICE_PXB);
- DO_TEST_PARSE_ERROR("pci-expander-bus-bad-bus",
- QEMU_CAPS_DEVICE_PXB);
+ DO_TEST_PARSE_ERROR("pci-expander-bus-bad-node", NONE);
+ DO_TEST_PARSE_ERROR("pci-expander-bus-bad-machine", NONE);
+ DO_TEST_PARSE_ERROR("pci-expander-bus-bad-bus", NONE);
DO_TEST("pcie-expander-bus",
QEMU_CAPS_DEVICE_IOH3420,
QEMU_CAPS_DEVICE_X3130_UPSTREAM,
QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
QEMU_CAPS_DEVICE_PXB_PCIE);
- DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-machine",
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_DEVICE_X3130_UPSTREAM,
- QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM,
- QEMU_CAPS_DEVICE_PXB_PCIE);
- DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-bus",
- QEMU_CAPS_DEVICE_IOH3420,
- QEMU_CAPS_DEVICE_PXB_PCIE);
+ DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-machine", NONE);
+ DO_TEST_PARSE_ERROR("pcie-expander-bus-bad-bus", NONE);
DO_TEST("hostdev-scsi-lsi",
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
@@ -2653,9 +2577,7 @@ mymain(void)
DO_TEST_GIC("aarch64-gic-host", GIC_BOTH,
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
- DO_TEST_PARSE_ERROR("aarch64-gic-invalid",
- QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
- QEMU_CAPS_MACH_VIRT_GIC_VERSION);
+ DO_TEST_PARSE_ERROR("aarch64-gic-invalid", NONE);
DO_TEST_FAILURE("aarch64-gic-not-virt",
QEMU_CAPS_KVM, QEMU_CAPS_MACHINE_OPT,
QEMU_CAPS_MACH_VIRT_GIC_VERSION);
@@ -2822,14 +2744,8 @@ mymain(void)
QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_VIRTIO_CCW,
QEMU_CAPS_VIRTIO_S390, QEMU_CAPS_BOOTINDEX,
QEMU_CAPS_LOADPARM);
- DO_TEST_PARSE_ERROR("machine-loadparm-s390-char-invalid",
- QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_VIRTIO_CCW,
- QEMU_CAPS_VIRTIO_S390, QEMU_CAPS_BOOTINDEX,
- QEMU_CAPS_LOADPARM);
- DO_TEST_PARSE_ERROR("machine-loadparm-s390-len-invalid",
- QEMU_CAPS_MACHINE_OPT, QEMU_CAPS_VIRTIO_CCW,
- QEMU_CAPS_VIRTIO_S390, QEMU_CAPS_BOOTINDEX,
- QEMU_CAPS_LOADPARM);
+ DO_TEST_PARSE_ERROR("machine-loadparm-s390-char-invalid", NONE);
+ DO_TEST_PARSE_ERROR("machine-loadparm-s390-len-invalid", NONE);
DO_TEST("qemu-ns-domain-ns0", NONE);
DO_TEST("qemu-ns-domain-commandline", NONE);
@@ -2877,8 +2793,7 @@ mymain(void)
DO_TEST("master-key", QEMU_CAPS_OBJECT_SECRET);
DO_TEST("usb-long-port-path", QEMU_CAPS_NODEFCONFIG,
QEMU_CAPS_USB_HUB);
- DO_TEST_PARSE_ERROR("usb-too-long-port-path-invalid",
- QEMU_CAPS_NODEFCONFIG, QEMU_CAPS_USB_HUB);
+ DO_TEST_PARSE_ERROR("usb-too-long-port-path-invalid", NONE);
DO_TEST("acpi-table", NONE);
DO_TEST("intel-iommu",
@@ -2915,6 +2830,9 @@ mymain(void)
QEMU_CAPS_DEVICE_INTEL_IOMMU);
DO_TEST("cpu-hotplug-startup", QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS);
+ /* The _QUERY_HOTPLUGGABLE_CPUS capability is needed here because, if
+ * not present, libvirt will not perform the vCPU hotplug granularity
+ * validation and the test will pass rather than failing */
DO_TEST_PARSE_ERROR("cpu-hotplug-granularity",
QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS);
@@ -2954,9 +2872,9 @@ mymain(void)
DO_TEST("cpu-cache-passthrough", QEMU_CAPS_KVM, QEMU_CAPS_CPU_CACHE);
DO_TEST("cpu-cache-passthrough2", QEMU_CAPS_KVM);
DO_TEST("cpu-cache-emulate-l3", QEMU_CAPS_KVM, QEMU_CAPS_CPU_CACHE);
- DO_TEST_PARSE_ERROR("cpu-cache-emulate-l2", QEMU_CAPS_KVM);
- DO_TEST_PARSE_ERROR("cpu-cache-passthrough3", QEMU_CAPS_KVM);
- DO_TEST_PARSE_ERROR("cpu-cache-passthrough-l3", QEMU_CAPS_KVM);
+ DO_TEST_PARSE_ERROR("cpu-cache-emulate-l2", NONE);
+ DO_TEST_PARSE_ERROR("cpu-cache-passthrough3", NONE);
+ DO_TEST_PARSE_ERROR("cpu-cache-passthrough-l3", NONE);
DO_TEST("vmcoreinfo", QEMU_CAPS_DEVICE_VMCOREINFO);
DO_TEST("user-aliases", QEMU_CAPS_KVM, QEMU_CAPS_DEVICE_CIRRUS_VGA,
--
2.14.3
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On Tue, Jan 30, 2018 at 19:10:06 +0100, Andrea Bolognani wrote:
> The lack of certain capabilities is going to cause errors pretty
> much exclusively when building the QEMU command line, because we
> purposefully leave such checks to the very last moments before
> starting a guest; so it doesn't make much sense to pass QEMU
> capabilities to DO_TEST_PARSE_ERROR() call which are supposed,
> as the name implies, to result in much earlier error.
This is a pretty strong statement which is not entirely true. Capability
bits may be also used in the post-parse and validation callbacks. Most
of the checks that the command line can be built are still in the
command line formatter but that's not the rule
> The only exception is the "cpu-hotplug-granularity" test, due
> to the fact that the checks we want to fail are skipped entirely
> if the relevant QEMU feature is not available.
>
> Signed-off-by: Andrea Bolognani <abologna@redhat.com>
> ---
> tests/qemuxml2argvtest.c | 184 +++++++++++++----------------------------------
> 1 file changed, 51 insertions(+), 133 deletions(-)
>
> diff --git a/tests/qemuxml2argvtest.c b/tests/qemuxml2argvtest.c
> index c8739909d..2df778853 100644
> --- a/tests/qemuxml2argvtest.c
> +++ b/tests/qemuxml2argvtest.c
[...]
> @@ -1037,17 +1034,10 @@ mymain(void)
> QEMU_CAPS_DRIVE_DISCARD,
> QEMU_CAPS_DRIVE_DETECT_ZEROES);
> DO_TEST("disk-snapshot", NONE);
> - DO_TEST_PARSE_ERROR("disk-same-targets",
> - QEMU_CAPS_SCSI_LSI,
> - QEMU_CAPS_DEVICE_USB_STORAGE, QEMU_CAPS_NODEFCONFIG);
So this is not quite equivalent. Here's a diff of error messages prior
and after your patch:
$ diff -u stderr stderr2
--- stderr 2018-01-31 09:34:37.295273384 +0100
+++ stderr2 2018-01-31 09:34:39.241273208 +0100
@@ -359,7 +359,7 @@
176) QEMU XML-2-ARGV disk-drive-detect-zeroes ... OK
177) QEMU XML-2-ARGV disk-snapshot ... OK
178) QEMU XML-2-ARGV disk-same-targets ... Got expected error:
- error : virDomainDiskDefCheckDuplicateInfo:28528 : XML error: target 'sda' duplicated for disk sources '/tmp/idedisk.img' and '/tmp/usbdisk.img'
+ error : qemuDomainSetSCSIControllerModel:100 : internal error: Unable to determine model for scsi controller
OK
179) QEMU XML-2-ARGV disk-drive-address-conflict ... Got expected error:
error : virDomainDefCheckDuplicateDriveAddresses:5764 : unsupported configuration: Found duplicate drive address for disk with target name 'sda' controller='0' bus='0' target='0' unit='0'
@@ -368,7 +368,7 @@
error : virDomainDiskDefAssignAddress:7912 : unsupported configuration: using disk target name 'sda' conflicts with SCSI host device address controller='0' bus='0' target='0' unit='0
OK
181) QEMU XML-2-ARGV hostdevs-drive-address-conflict ... Got expected error:
- error : virDomainDefCheckDuplicateDriveAddresses:5805 : unsupported configuration: SCSI host address controller='0' bus='0' target='0' unit='0' in use by another SCSI host device
+ error : qemuDomainSetSCSIControllerModel:62 : unsupported configuration: This QEMU doesn't support virtio scsi controller
OK
182) QEMU XML-2-ARGV event_idx ... OK
183) QEMU XML-2-ARGV virtio-lun ... OK
@@ -387,8 +387,7 @@
error : virDomainDiskDefValidate:5193 : unsupported configuration: Invalid address type 'pci' for the disk 'sda' with the bus type 'sata'
OK
189) QEMU XML-2-ARGV disk-scsi-incompatible-address ... Got expected error:
- warning : qemuDomainCollectPCIAddress:1242 : qemuDomainDeviceCalculatePCIConnectFlags() thinks that the device with PCI address 0000:00:01.1 should not have a PCI address
- error : virDomainDiskDefValidate:5193 : unsupported configuration: Invalid address type 'pci' for the disk 'sda' with the bus type 'scsi'
+ error : qemuDomainSetSCSIControllerModel:62 : unsupported configuration: This QEMU doesn't support virtio scsi controller
OK
190) QEMU XML-2-ARGV graphics-vnc ... OK
191) QEMU XML-2-ARGV graphics-vnc-socket ... OK
@@ -896,7 +895,7 @@
OK
560) QEMU XML-2-ARGV s390-panic-missing ... OK
561) QEMU XML-2-ARGV s390-no-parallel ... Got expected error:
- error : qemuDomainChrDefValidate:3588 : unsupported configuration: parallel ports are not supported
+ error : virDomainPCIAddressGetNextAddr:805 : XML error: No PCI buses available
OK
562) QEMU XML-2-ARGV s390-serial ... OK
563) QEMU XML-2-ARGV s390-serial-2 ... OK
> @@ -2915,6 +2830,9 @@ mymain(void)
> QEMU_CAPS_DEVICE_INTEL_IOMMU);
>
> DO_TEST("cpu-hotplug-startup", QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS);
> + /* The _QUERY_HOTPLUGGABLE_CPUS capability is needed here because, if
> + * not present, libvirt will not perform the vCPU hotplug granularity
> + * validation and the test will pass rather than failing */
This error message is spurious. There is a good reason to have
capability bits for some tests and I don't think it needs to be
explained.
> DO_TEST_PARSE_ERROR("cpu-hotplug-granularity",
> QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS);
>
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
On Wed, 2018-01-31 at 09:38 +0100, Peter Krempa wrote:
> > @@ -1037,17 +1034,10 @@ mymain(void)
> > QEMU_CAPS_DRIVE_DISCARD,
> > QEMU_CAPS_DRIVE_DETECT_ZEROES);
> > DO_TEST("disk-snapshot", NONE);
> > - DO_TEST_PARSE_ERROR("disk-same-targets",
> > - QEMU_CAPS_SCSI_LSI,
> > - QEMU_CAPS_DEVICE_USB_STORAGE, QEMU_CAPS_NODEFCONFIG);
>
> So this is not quite equivalent. Here's a diff of error messages prior
> and after your patch:
>
> $ diff -u stderr stderr2
> --- stderr 2018-01-31 09:34:37.295273384 +0100
> +++ stderr2 2018-01-31 09:34:39.241273208 +0100
[...]
> @@ -896,7 +895,7 @@
> OK
> 560) QEMU XML-2-ARGV s390-panic-missing ... OK
> 561) QEMU XML-2-ARGV s390-no-parallel ... Got expected error:
> - error : qemuDomainChrDefValidate:3588 : unsupported configuration: parallel ports are not supported
> + error : virDomainPCIAddressGetNextAddr:805 : XML error: No PCI buses available
> OK
> 562) QEMU XML-2-ARGV s390-serial ... OK
> 563) QEMU XML-2-ARGV s390-serial-2 ... OK
Yeah, I thought about going through this exercise of comparing the
output from before and after my patch - but only after leaving the
office for the day ;)
I could go through the list and only remove the capabilities that
are really unused, but it sounds like an awful lot of work just to
shave less than 100 lines off the test suite. Let's just drop it.
--
Andrea Bolognani / Red Hat / Virtualization
--
libvir-list mailing list
libvir-list@redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
© 2016 - 2025 Red Hat, Inc.