qemu-nbd.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 172 insertions(+), 9 deletions(-)
Socket activation (sometimes known as systemd socket activation)
allows an Internet superserver to pass a pre-opened listening socket
to the process, instead of having qemu-nbd open a socket itself. This
is done via the LISTEN_FDS and LISTEN_PID environment variables, and a
standard file descriptor range.
This change partially implements socket activation for qemu-nbd. If
the environment variables are set correctly, then socket activation
will happen automatically, otherwise everything works as before. The
limitation is that LISTEN_FDS must be 1.
Signed-off-by: Richard W.M. Jones.
---
qemu-nbd.c | 181 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 172 insertions(+), 9 deletions(-)
diff --git a/qemu-nbd.c b/qemu-nbd.c
index c734f62..bde2740 100644
--- a/qemu-nbd.c
+++ b/qemu-nbd.c
@@ -463,6 +463,143 @@ static QCryptoTLSCreds *nbd_get_tls_creds(const char *id, Error **errp)
return creds;
}
+#define MACRO_EXPAND_STRINGIFY(x) STRINGIFY(x)
+#define STRINGIFY(x) #x
+
+static void setup_address_and_port(const char **address, const char **port)
+{
+ if (*address == NULL) {
+ *address = "0.0.0.0";
+ }
+
+ if (*port == NULL) {
+ *port = MACRO_EXPAND_STRINGIFY(NBD_DEFAULT_PORT);
+ }
+}
+
+#define FIRST_SOCKET_ACTIVATION_FD 3 /* defined by systemd ABI */
+
+#ifndef _WIN32
+/*
+ * Check if socket activation was requested via use of the
+ * LISTEN_FDS and LISTEN_PID environment variables.
+ *
+ * Returns 0 if no socket activation, or the number of FDs.
+ */
+static unsigned int check_socket_activation(void)
+{
+ const char *s;
+ unsigned long pid;
+ unsigned long nr_fds;
+ unsigned int i;
+ int fd;
+ int err;
+
+ s = getenv("LISTEN_PID");
+ if (s == NULL) {
+ return 0;
+ }
+ err = qemu_strtoul(s, NULL, 10, &pid);
+ if (err) {
+ if (verbose) {
+ fprintf(stderr, "malformed %s environment variable (ignored)\n",
+ "LISTEN_PID");
+ }
+ return 0;
+ }
+ if (pid != getpid()) {
+ if (verbose) {
+ fprintf(stderr, "%s was not for us (ignored)\n",
+ "LISTEN_PID");
+ }
+ return 0;
+ }
+
+ s = getenv("LISTEN_FDS");
+ if (s == NULL) {
+ return 0;
+ }
+ err = qemu_strtoul(s, NULL, 10, &nr_fds);
+ if (err) {
+ if (verbose) {
+ fprintf(stderr, "malformed %s environment variable (ignored)\n",
+ "LISTEN_FDS");
+ }
+ return 0;
+ }
+ assert(nr_fds <= UINT_MAX);
+
+ /* A limitation of current qemu-nbd is that it can only listen on
+ * a single socket. When that limitation is lifted, we can change
+ * this function to allow LISTEN_FDS > 1, and remove the assertion
+ * in the main function below.
+ */
+ if (nr_fds > 1) {
+ error_report("qemu-nbd does not support socket activation with %s > 1",
+ "LISTEN_FDS");
+ exit(EXIT_FAILURE);
+ }
+
+ /* So these are not passed to any child processes we might start. */
+ unsetenv("LISTEN_FDS");
+ unsetenv("LISTEN_PID");
+
+ /* So the file descriptors don't leak into child processes. */
+ for (i = 0; i < nr_fds; ++i) {
+ fd = FIRST_SOCKET_ACTIVATION_FD + i;
+ if (fcntl(fd, F_SETFD, FD_CLOEXEC) == -1) {
+ /* If we cannot set FD_CLOEXEC then it probably means the file
+ * descriptor is invalid, so socket activation has gone wrong
+ * and we should exit.
+ */
+ error_report("Socket activation failed: "
+ "invalid file descriptor fd = %d: %m",
+ fd);
+ exit(EXIT_FAILURE);
+ }
+ }
+
+ return (unsigned int) nr_fds;
+}
+
+#else /* !_WIN32 */
+static unsigned int check_socket_activation(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * Check socket parameters compatibility when socket activation is used.
+ */
+static const char *socket_activation_validate_opts(const char *device,
+ const char *sockpath,
+ const char *address,
+ const char *port,
+ bool fork_process)
+{
+ if (device != NULL) {
+ return "NBD device can't be set when using socket activation";
+ }
+
+ if (sockpath != NULL) {
+ return "Unix socket can't be set when using socket activation";
+ }
+
+ if (address != NULL) {
+ return "The interface can't be set when using socket activation";
+ }
+
+ if (port != NULL) {
+ return "TCP port number can't be set when using socket activation";
+ }
+
+ if (fork_process) {
+ return "Fork (--fork) can't be used with socket activation";
+ }
+
+ return NULL;
+}
int main(int argc, char **argv)
{
@@ -471,7 +608,7 @@ int main(int argc, char **argv)
off_t dev_offset = 0;
uint16_t nbdflags = 0;
bool disconnect = false;
- const char *bindto = "0.0.0.0";
+ const char *bindto = NULL;
const char *port = NULL;
char *sockpath = NULL;
char *device = NULL;
@@ -533,6 +670,7 @@ int main(int argc, char **argv)
char *trace_file = NULL;
bool fork_process = false;
int old_stderr = -1;
+ unsigned socket_activation;
/* The client thread uses SIGTERM to interrupt the server. A signal
* handler ensures that "qemu-nbd -v -c" exits with a nice status code.
@@ -751,6 +889,20 @@ int main(int argc, char **argv)
trace_init_file(trace_file);
qemu_set_log(LOG_TRACE);
+ socket_activation = check_socket_activation();
+ if (socket_activation == 0) {
+ setup_address_and_port(&bindto, &port);
+ } else {
+ /* Using socket activation - check user didn't use -p etc. */
+ const char *err_msg = socket_activation_validate_opts(device, sockpath,
+ bindto, port,
+ fork_process);
+ if (err_msg != NULL) {
+ error_report("%s", err_msg);
+ exit(EXIT_FAILURE);
+ }
+ }
+
if (tlscredsid) {
if (sockpath) {
error_report("TLS is only supported with IPv4/IPv6");
@@ -855,7 +1007,25 @@ int main(int argc, char **argv)
snprintf(sockpath, 128, SOCKET_PATH, basename(device));
}
- saddr = nbd_build_socket_address(sockpath, bindto, port);
+ if (socket_activation == 0) {
+ server_ioc = qio_channel_socket_new();
+ saddr = nbd_build_socket_address(sockpath, bindto, port);
+ if (qio_channel_socket_listen_sync(server_ioc, saddr, &local_err) < 0) {
+ object_unref(OBJECT(server_ioc));
+ error_report_err(local_err);
+ return 1;
+ }
+ } else {
+ /* See comment in check_socket_activation above. */
+ assert(socket_activation == 1);
+ server_ioc = qio_channel_socket_new_fd(FIRST_SOCKET_ACTIVATION_FD,
+ &local_err);
+ if (server_ioc == NULL) {
+ error_report("Failed to use socket activation: %s",
+ error_get_pretty(local_err));
+ exit(EXIT_FAILURE);
+ }
+ }
if (qemu_init_main_loop(&local_err)) {
error_report_err(local_err);
@@ -950,13 +1120,6 @@ int main(int argc, char **argv)
exit(EXIT_FAILURE);
}
- server_ioc = qio_channel_socket_new();
- if (qio_channel_socket_listen_sync(server_ioc, saddr, &local_err) < 0) {
- object_unref(OBJECT(server_ioc));
- error_report_err(local_err);
- return 1;
- }
-
if (device) {
int ret;
--
2.10.2
On 03/02/2017 09:09, Richard W.M. Jones wrote: > + const char *port, > + bool fork_process) > +{ > + if (device != NULL) { > + return "NBD device can't be set when using socket activation"; > + } > + > + if (sockpath != NULL) { > + return "Unix socket can't be set when using socket activation"; > + } > + > + if (address != NULL) { > + return "The interface can't be set when using socket activation"; > + } > + > + if (port != NULL) { > + return "TCP port number can't be set when using socket activation"; > + } > + > + if (fork_process) { > + return "Fork (--fork) can't be used with socket activation"; > + } Why not? You could have a Type=forking foo.service, which makes little sense but would work. Apart from this, the patch seems fine. > + return NULL; > +}
On Fri, Feb 03, 2017 at 09:31:43AM -0800, Paolo Bonzini wrote: > > > On 03/02/2017 09:09, Richard W.M. Jones wrote: > > + const char *port, > > + bool fork_process) > > +{ > > + if (device != NULL) { > > + return "NBD device can't be set when using socket activation"; > > + } > > + > > + if (sockpath != NULL) { > > + return "Unix socket can't be set when using socket activation"; > > + } > > + > > + if (address != NULL) { > > + return "The interface can't be set when using socket activation"; > > + } > > + > > + if (port != NULL) { > > + return "TCP port number can't be set when using socket activation"; > > + } > > + > > + if (fork_process) { > > + return "Fork (--fork) can't be used with socket activation"; > > + } > > Why not? You could have a Type=forking foo.service, which makes little > sense but would work. The answer, I think, is because systemd will lose track of the PID of the qemu-nbd process. This would be important because systemd can kill a socket-activated service which is idle. Normally you would work around that by using PIDFile=... in the unit file, but it looks like qemu-nbd doesn't support pid files. Rich. > Apart from this, the patch seems fine. > > > + return NULL; > > +} > > -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
On 03/02/2017 10:56, Richard W.M. Jones wrote: > On Fri, Feb 03, 2017 at 09:31:43AM -0800, Paolo Bonzini wrote: >> >> >> On 03/02/2017 09:09, Richard W.M. Jones wrote: >>> + const char *port, >>> + bool fork_process) >>> +{ >>> + if (device != NULL) { >>> + return "NBD device can't be set when using socket activation"; >>> + } >>> + >>> + if (sockpath != NULL) { >>> + return "Unix socket can't be set when using socket activation"; >>> + } >>> + >>> + if (address != NULL) { >>> + return "The interface can't be set when using socket activation"; >>> + } >>> + >>> + if (port != NULL) { >>> + return "TCP port number can't be set when using socket activation"; >>> + } >>> + >>> + if (fork_process) { >>> + return "Fork (--fork) can't be used with socket activation"; >>> + } >> >> Why not? You could have a Type=forking foo.service, which makes little >> sense but would work. > > The answer, I think, is because systemd will lose track of the PID of > the qemu-nbd process. This would be important because systemd can > kill a socket-activated service which is idle. > > Normally you would work around that by using PIDFile=... in the unit > file, but it looks like qemu-nbd doesn't support pid files. PIDFile is recommended indeed but GuessMainPID=yes (the default for no PIDFile) should work, since qemu-nbd only has one parent process. Paolo
On Fri, Feb 03, 2017 at 10:58:15AM -0800, Paolo Bonzini wrote: > On 03/02/2017 10:56, Richard W.M. Jones wrote: > > On Fri, Feb 03, 2017 at 09:31:43AM -0800, Paolo Bonzini wrote: > >> On 03/02/2017 09:09, Richard W.M. Jones wrote: > >>> + if (fork_process) { > >>> + return "Fork (--fork) can't be used with socket activation"; > >>> + } > >> > >> Why not? You could have a Type=forking foo.service, which makes little > >> sense but would work. > > > > The answer, I think, is because systemd will lose track of the PID of > > the qemu-nbd process. This would be important because systemd can > > kill a socket-activated service which is idle. > > > > Normally you would work around that by using PIDFile=... in the unit > > file, but it looks like qemu-nbd doesn't support pid files. > > PIDFile is recommended indeed but GuessMainPID=yes (the default for no > PIDFile) should work, since qemu-nbd only has one parent process. Another reason: I think that the --fork option is mainly intended for command line use of qemu-nbd. If you're running qemu-nbd from a program there's no real reason to use --fork, since you can control the fork process better yourself. LISTEN_PID isn't settable from the command line. It's also not settable from a shell script (as far as I can tell when I was trying to write a shell script to test nbdkit). It has to be set between the fork and exec calls, because it is set to the qemu-nbd PID. So I don't think --fork and socket activation are really features that it makes any sense to mix. Rich. -- Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones Read my programming and virtualization blog: http://rwmj.wordpress.com virt-builder quickly builds VMs from scratch http://libguestfs.org/virt-builder.1.html
On 03/02/2017 11:22, Richard W.M. Jones wrote: > > I think that the --fork option is mainly intended for command line use > of qemu-nbd. If you're running qemu-nbd from a program there's no > real reason to use --fork, since you can control the fork process > better yourself. > > LISTEN_PID isn't settable from the command line. It's also not > settable from a shell script (as far as I can tell when I was trying > to write a shell script to test nbdkit). It has to be set between the > fork and exec calls, because it is set to the qemu-nbd PID. > > So I don't think --fork and socket activation are really features that > it makes any sense to mix. I agree it doesn't really make sense, but I also don't see why it wouldn't work. Paolo
© 2016 - 2024 Red Hat, Inc.