The following changes since commit d61d1a1fb2f1db6c54651844a28389c523f3f8c7: Merge remote-tracking branch 'remotes/kraxel/tags/fixes-20190402-pull-request' into staging (2019-04-02 08:18:24 +0100) are available in the Git repository at: git://repo.or.cz/qemu/kevin.git tags/for-upstream for you to fetch changes up to f18957b854495129f2e8d6838df3bf47d1c1479c: tests/qemu-iotests/235: Allow fallback to tcg (2019-04-02 12:04:56 +0200) ---------------------------------------------------------------- Block layer patches: - file-posix: Ignore unlock failure instead of crashing - gluster: Limit the transfer size to 512 MiB - stream: Fix backing chain freezing - qemu-img: Enable BDRV_REQ_MAY_UNMAP for zero writes in convert - iotests fixes ---------------------------------------------------------------- Alberto Garcia (3): block: continue until base is found in bdrv_freeze_backing_chain() et al block: freeze the backing chain earlier in stream_start() block: test block-stream with a base node that is used by block-commit Nir Soffer (1): qemu-img: Enable BDRV_REQ_MAY_UNMAP in convert Stefano Garzarella (1): block/gluster: limit the transfer size to 512 MiB Thomas Huth (3): iotests: Fix test 200 on s390x without virtio-pci tests/qemu-iotests: Remove redundant COPYING file tests/qemu-iotests/235: Allow fallback to tcg Vladimir Sementsov-Ogievskiy (1): block/file-posix: do not fail on unlock bytes block.c | 21 ++- block/file-posix.c | 12 ++ block/gluster.c | 16 +++ block/stream.c | 13 +- qemu-img.c | 3 +- tests/qemu-iotests/030 | 17 +++ tests/qemu-iotests/030.out | 4 +- tests/qemu-iotests/200 | 14 +- tests/qemu-iotests/235 | 2 +- tests/qemu-iotests/COPYING | 339 --------------------------------------------- 10 files changed, 82 insertions(+), 359 deletions(-) delete mode 100644 tests/qemu-iotests/COPYING From: Thomas Huth <thuth@redhat.com> virtio-pci is optional on s390x, e.g. in downstream RHEL builds, it is disabled. On s390x, virtio-ccw should be used instead. Other tests like 051 or 240 already use virtio-scsi-ccw instead of virtio-scsi-pci on s390x, so let's do the same here and always use virtio-scsi-ccw on s390x. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- tests/qemu-iotests/200 | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/tests/qemu-iotests/200 b/tests/qemu-iotests/200 index XXXXXXX..XXXXXXX 100755 --- a/tests/qemu-iotests/200 +++ b/tests/qemu-iotests/200 @@ -XXX,XX +XXX,XX @@ ${QEMU_IMG} create -f $IMGFMT -F $IMGFMT "${TEST_IMG}" -b "${BACKING_IMG}" 512M ${QEMU_IO} -c "write -P 0xa5 512 300M" "${BACKING_IMG}" | _filter_qemu_io +case "$QEMU_DEFAULT_MACHINE" in + s390-ccw-virtio) + virtio_scsi="-device virtio-scsi-ccw,id=scsi0,iothread=iothread0" + ;; + *) + virtio_scsi="-device pci-bridge,id=bridge1,chassis_nr=1,bus=pci.0 + -device virtio-scsi-pci,bus=bridge1,addr=0x1f,id=scsi0,iothread=iothread0" + ;; +esac + echo echo === Starting QEMU VM === echo qemu_comm_method="qmp" -_launch_qemu -device pci-bridge,id=bridge1,chassis_nr=1,bus=pci.0 \ - -object iothread,id=iothread0 \ - -device virtio-scsi-pci,bus=bridge1,addr=0x1f,id=scsi0,iothread=iothread0 \ +_launch_qemu -object iothread,id=iothread0 $virtio_scsi \ -drive file="${TEST_IMG}",media=disk,if=none,cache=$CACHEMODE,id=drive_sysdisk,format=$IMGFMT \ -device scsi-hd,drive=drive_sysdisk,bus=scsi0.0,id=sysdisk,bootindex=0 h1=$QEMU_HANDLE -- 2.20.1 From: Nir Soffer <nirsof@gmail.com> With Kevin's "block: Fix slow pre-zeroing in qemu-img convert"[1] (commit c9fdcf202f, 'qemu-img: Use BDRV_REQ_NO_FALLBACK for pre-zeroing') we skip the pre zero step called like this: blk_make_zero(s->target, BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) And we write zeroes later using: blk_co_pwrite_zeroes(s->target, sector_num << BDRV_SECTOR_BITS, n << BDRV_SECTOR_BITS, 0); Since we use flags=0, this is translated to NBD_CMD_WRITE_ZEROES with NBD_CMD_FLAG_NO_HOLE flag, which cause the NBD server to allocated space instead of punching a hole. Here is an example failure: $ dd if=/dev/urandom of=src.img bs=1M count=5 $ truncate -s 50m src.img $ truncate -s 50m dst.img $ nbdkit -f -v -e '' -U nbd.sock file file=dst.img $ ./qemu-img convert -n src.img nbd:unix:nbd.sock We can see in nbdkit log that it received the NBD_CMD_FLAG_NO_HOLE (may_trim=0): nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d nbdkit: file[1]: debug: pwrite count=2097152 offset=0 nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152 nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304 nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=0 nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=0 nbdkit: file[1]: debug: flush And the image became fully allocated: $ qemu-img info dst.img virtual size: 50M (52428800 bytes) disk size: 50M With this change we see that nbdkit did not receive the NBD_CMD_FLAG_NO_HOLE (may_trim=1): nbdkit: file[1]: debug: newstyle negotiation: flags: export 0x4d nbdkit: file[1]: debug: pwrite count=2097152 offset=0 nbdkit: file[1]: debug: pwrite count=2097152 offset=2097152 nbdkit: file[1]: debug: pwrite count=1048576 offset=4194304 nbdkit: file[1]: debug: zero count=33554432 offset=5242880 may_trim=1 nbdkit: file[1]: debug: zero count=13631488 offset=38797312 may_trim=1 nbdkit: file[1]: debug: flush And the file is sparse as expected: $ qemu-img info dst.img virtual size: 50M (52428800 bytes) disk size: 5.0M [1] http://lists.nongnu.org/archive/html/qemu-block/2019-03/msg00761.html Signed-off-by: Nir Soffer <nsoffer@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- qemu-img.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/qemu-img.c b/qemu-img.c index XXXXXXX..XXXXXXX 100644 --- a/qemu-img.c +++ b/qemu-img.c @@ -XXX,XX +XXX,XX @@ static int coroutine_fn convert_co_write(ImgConvertState *s, int64_t sector_num, } ret = blk_co_pwrite_zeroes(s->target, sector_num << BDRV_SECTOR_BITS, - n << BDRV_SECTOR_BITS, 0); + n << BDRV_SECTOR_BITS, + BDRV_REQ_MAY_UNMAP); if (ret < 0) { return ret; } -- 2.20.1 From: Stefano Garzarella <sgarzare@redhat.com> Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size is greater or equal to 1024 MiB, so we are limiting the transfer size to 512 MiB to avoid this rare issue. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1691320 Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- block/gluster.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/block/gluster.c b/block/gluster.c index XXXXXXX..XXXXXXX 100644 --- a/block/gluster.c +++ b/block/gluster.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include <glusterfs/api/glfs.h> #include "block/block_int.h" #include "block/qdict.h" @@ -XXX,XX +XXX,XX @@ #define GLUSTER_DEBUG_MAX 9 #define GLUSTER_OPT_LOGFILE "logfile" #define GLUSTER_LOGFILE_DEFAULT "-" /* handled in libgfapi as /dev/stderr */ +/* + * Several versions of GlusterFS (3.12? -> 6.0.1) fail when the transfer size + * is greater or equal to 1024 MiB, so we are limiting the transfer size to 512 + * MiB to avoid this rare issue. + */ +#define GLUSTER_MAX_TRANSFER (512 * MiB) #define GERR_INDEX_HINT "hint: check in 'server' array index '%d'\n" @@ -XXX,XX +XXX,XX @@ out: return ret; } +static void qemu_gluster_refresh_limits(BlockDriverState *bs, Error **errp) +{ + bs->bl.max_transfer = GLUSTER_MAX_TRANSFER; +} + static int qemu_gluster_reopen_prepare(BDRVReopenState *state, BlockReopenQueue *queue, Error **errp) { @@ -XXX,XX +XXX,XX @@ static BlockDriver bdrv_gluster = { .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes, #endif .bdrv_co_block_status = qemu_gluster_co_block_status, + .bdrv_refresh_limits = qemu_gluster_refresh_limits, .create_opts = &qemu_gluster_create_opts, .strong_runtime_opts = gluster_strong_open_opts, }; @@ -XXX,XX +XXX,XX @@ static BlockDriver bdrv_gluster_tcp = { .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes, #endif .bdrv_co_block_status = qemu_gluster_co_block_status, + .bdrv_refresh_limits = qemu_gluster_refresh_limits, .create_opts = &qemu_gluster_create_opts, .strong_runtime_opts = gluster_strong_open_opts, }; @@ -XXX,XX +XXX,XX @@ static BlockDriver bdrv_gluster_unix = { .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes, #endif .bdrv_co_block_status = qemu_gluster_co_block_status, + .bdrv_refresh_limits = qemu_gluster_refresh_limits, .create_opts = &qemu_gluster_create_opts, .strong_runtime_opts = gluster_strong_open_opts, }; @@ -XXX,XX +XXX,XX @@ static BlockDriver bdrv_gluster_rdma = { .bdrv_co_pwrite_zeroes = qemu_gluster_co_pwrite_zeroes, #endif .bdrv_co_block_status = qemu_gluster_co_block_status, + .bdrv_refresh_limits = qemu_gluster_refresh_limits, .create_opts = &qemu_gluster_create_opts, .strong_runtime_opts = gluster_strong_open_opts, }; -- 2.20.1 From: Thomas Huth <thuth@redhat.com> The file tests/qemu-iotests/COPYING is the same text as in the COPYING file in the main directory. So as far as I can see, we don't need the duplicate here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- tests/qemu-iotests/COPYING | 339 ------------------------------------- 1 file changed, 339 deletions(-) delete mode 100644 tests/qemu-iotests/COPYING diff --git a/tests/qemu-iotests/COPYING b/tests/qemu-iotests/COPYING deleted file mode 100644 index XXXXXXX..XXXXXXX --- a/tests/qemu-iotests/COPYING +++ /dev/null @@ -XXX,XX +XXX,XX @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - <signature of Ty Coon>, 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. -- 2.20.1 From: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> bdrv_replace_child() calls bdrv_check_perm() with error_abort on loosening permissions. However file-locking operations may fail even in this case, for example on NFS. And this leads to Qemu crash. Let's avoid such errors. Note, that we ignore such things anyway on permission update commit and abort. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- block/file-posix.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/block/file-posix.c b/block/file-posix.c index XXXXXXX..XXXXXXX 100644 --- a/block/file-posix.c +++ b/block/file-posix.c @@ -XXX,XX +XXX,XX @@ static int raw_handle_perm_lock(BlockDriverState *bs, switch (op) { case RAW_PL_PREPARE: + if ((s->perm | new_perm) == s->perm && + (s->shared_perm & new_shared) == s->shared_perm) + { + /* + * We are going to unlock bytes, it should not fail. If it fail due + * to some fs-dependent permission-unrelated reasons (which occurs + * sometimes on NFS and leads to abort in bdrv_replace_child) we + * can't prevent such errors by any check here. And we ignore them + * anyway in ABORT and COMMIT. + */ + return 0; + } ret = raw_apply_lock_bytes(s, s->fd, s->perm | new_perm, ~s->shared_perm | ~new_shared, false, errp); -- 2.20.1 From: Alberto Garcia <berto@igalia.com> All three functions that handle the BdrvChild.frozen attribute walk the backing chain from 'bs' to 'base' and stop either when 'base' is found or at the end of the chain if 'base' is NULL. However if 'base' is not found then the functions return without errors as if it was NULL. This is wrong: if the caller passed an incorrect parameter that means that there is a bug in the code. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- block.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/block.c b/block.c index XXXXXXX..XXXXXXX 100644 --- a/block.c +++ b/block.c @@ -XXX,XX +XXX,XX @@ BlockDriverState *bdrv_find_base(BlockDriverState *bs) /* * Return true if at least one of the backing links between @bs and * @base is frozen. @errp is set if that's the case. + * @base must be reachable from @bs, or NULL. */ bool bdrv_is_backing_chain_frozen(BlockDriverState *bs, BlockDriverState *base, Error **errp) { BlockDriverState *i; - for (i = bs; i != base && i->backing; i = backing_bs(i)) { - if (i->backing->frozen) { + for (i = bs; i != base; i = backing_bs(i)) { + if (i->backing && i->backing->frozen) { error_setg(errp, "Cannot change '%s' link from '%s' to '%s'", i->backing->name, i->node_name, backing_bs(i)->node_name); @@ -XXX,XX +XXX,XX @@ bool bdrv_is_backing_chain_frozen(BlockDriverState *bs, BlockDriverState *base, * Freeze all backing links between @bs and @base. * If any of the links is already frozen the operation is aborted and * none of the links are modified. + * @base must be reachable from @bs, or NULL. * Returns 0 on success. On failure returns < 0 and sets @errp. */ int bdrv_freeze_backing_chain(BlockDriverState *bs, BlockDriverState *base, @@ -XXX,XX +XXX,XX @@ int bdrv_freeze_backing_chain(BlockDriverState *bs, BlockDriverState *base, return -EPERM; } - for (i = bs; i != base && i->backing; i = backing_bs(i)) { - i->backing->frozen = true; + for (i = bs; i != base; i = backing_bs(i)) { + if (i->backing) { + i->backing->frozen = true; + } } return 0; @@ -XXX,XX +XXX,XX @@ int bdrv_freeze_backing_chain(BlockDriverState *bs, BlockDriverState *base, /* * Unfreeze all backing links between @bs and @base. The caller must * ensure that all links are frozen before using this function. + * @base must be reachable from @bs, or NULL. */ void bdrv_unfreeze_backing_chain(BlockDriverState *bs, BlockDriverState *base) { BlockDriverState *i; - for (i = bs; i != base && i->backing; i = backing_bs(i)) { - assert(i->backing->frozen); - i->backing->frozen = false; + for (i = bs; i != base; i = backing_bs(i)) { + if (i->backing) { + assert(i->backing->frozen); + i->backing->frozen = false; + } } } -- 2.20.1 From: Alberto Garcia <berto@igalia.com> Commit 6585493369819a48d34a86d57ec6b97cb5cd9bc0 added code to freeze the backing chain from 'top' to 'base' for the duration of the block-stream job. The problem is that the freezing happens too late in stream_start(): during the bdrv_reopen_set_read_only() call earlier in that function another job can jump in and remove the base image. If that happens we have an invalid chain and QEMU crashes. This patch puts the bdrv_freeze_backing_chain() call at the beginning of the function. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- block/stream.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/block/stream.c b/block/stream.c index XXXXXXX..XXXXXXX 100644 --- a/block/stream.c +++ b/block/stream.c @@ -XXX,XX +XXX,XX @@ void stream_start(const char *job_id, BlockDriverState *bs, BlockDriverState *iter; bool bs_read_only; + if (bdrv_freeze_backing_chain(bs, base, errp) < 0) { + return; + } + /* Make sure that the image is opened in read-write mode */ bs_read_only = bdrv_is_read_only(bs); if (bs_read_only) { if (bdrv_reopen_set_read_only(bs, false, errp) != 0) { - return; + bs_read_only = false; + goto fail; } } @@ -XXX,XX +XXX,XX @@ void stream_start(const char *job_id, BlockDriverState *bs, &error_abort); } - if (bdrv_freeze_backing_chain(bs, base, errp) < 0) { - job_early_fail(&s->common.job); - goto fail; - } - s->base = base; s->backing_file_str = g_strdup(backing_file_str); s->bs_read_only = bs_read_only; @@ -XXX,XX +XXX,XX @@ fail: if (bs_read_only) { bdrv_reopen_set_read_only(bs, true, NULL); } + bdrv_unfreeze_backing_chain(bs, base); } -- 2.20.1 From: Alberto Garcia <berto@igalia.com> The base node of a block-stream operation indicates the first image from the backing chain starting from which no data is copied to the top node. The block-stream job allows others to use that base image, so a second block-stream job could be writing to it at the same time. An important restriction is that the base image must not disappear while the stream job is ongoing. stream_start() freezes the backing chain from top to base with that purpose but it does it too late in the code so there is a race condition there. This bug was fixed in the previous commit, and this patch contains an iotest for this scenario. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- tests/qemu-iotests/030 | 17 +++++++++++++++++ tests/qemu-iotests/030.out | 4 ++-- 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030 index XXXXXXX..XXXXXXX 100755 --- a/tests/qemu-iotests/030 +++ b/tests/qemu-iotests/030 @@ -XXX,XX +XXX,XX @@ class TestParallelOps(iotests.QMPTestCase): self.wait_until_completed(drive='commit-drive0') + # In this case the base node of the stream job is the same as the + # top node of commit job. Since block-commit removes the top node + # when it finishes, this is not allowed. + def test_overlapping_4(self): + self.assert_no_active_block_jobs() + + # Commit from node2 into node0 + result = self.vm.qmp('block-commit', device='drive0', top=self.imgs[2], base=self.imgs[0]) + self.assert_qmp(result, 'return', {}) + + # Stream from node2 into node4 + result = self.vm.qmp('block-stream', device='node4', base_node='node2', job_id='node4') + self.assert_qmp(result, 'error/class', 'GenericError') + + self.wait_until_completed() + self.assert_no_active_block_jobs() + # Test a block-stream and a block-commit job in parallel # Here the stream job is supposed to finish quickly in order to reproduce # the scenario that triggers the bug fixed in 3d5d319e1221 and 1a63a907507 diff --git a/tests/qemu-iotests/030.out b/tests/qemu-iotests/030.out index XXXXXXX..XXXXXXX 100644 --- a/tests/qemu-iotests/030.out +++ b/tests/qemu-iotests/030.out @@ -XXX,XX +XXX,XX @@ -........................ +......................... ---------------------------------------------------------------------- -Ran 24 tests +Ran 25 tests OK -- 2.20.1 From: Thomas Huth <thuth@redhat.com> iotest 235 currently only works with KVM - this is bad for systems where it is not available, e.g. CI pipelines. The test also works when using "tcg" as accelerator, so we can simply add that to the list of accelerators, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> --- tests/qemu-iotests/235 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qemu-iotests/235 b/tests/qemu-iotests/235 index XXXXXXX..XXXXXXX 100755 --- a/tests/qemu-iotests/235 +++ b/tests/qemu-iotests/235 @@ -XXX,XX +XXX,XX @@ qemu_img_create('-f', iotests.imgfmt, '-o', 'preallocation=metadata', disk, str(size)) vm = QEMUMachine(iotests.qemu_prog) -vm.add_args('-machine', 'accel=kvm') +vm.add_args('-machine', 'accel=kvm:tcg') if iotests.qemu_default_machine == 's390-ccw-virtio': vm.add_args('-no-shutdown') vm.add_args('-drive', 'id=src,file=' + disk) -- 2.20.1 The following changes since commit 13356edb87506c148b163b8c7eb0695647d00c2a: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-01-24 09:45:33 +0000) are available in the Git repository at: https://repo.or.cz/qemu/kevin.git tags/for-upstream for you to fetch changes up to d570177b50c389f379f93183155a27d44856ab46: qemu-img: Change info key names for protocol nodes (2023-02-01 16:52:33 +0100) v4: - Fixed the 'qemu-img-close-errors' test case to run only on Linux and only with the file protocol, use qemu-io instead of truncate v3: - Make the compiler happier on BSD and CentOS Stream 8 v2: - Rebased to resolve merge conflicts in coroutine.h ---------------------------------------------------------------- Block layer patches - qemu-img info: Show protocol-level information - Move more functions to coroutines - Make coroutine annotations ready for static analysis - qemu-img: Fix exit code for errors closing the image - qcow2 bitmaps: Fix theoretical corruption in error path - pflash: Only load non-zero parts of backend image to save memory - Code cleanup and test case improvements ---------------------------------------------------------------- Alberto Faria (2): coroutine: annotate coroutine_fn for libclang block: Add no_coroutine_fn and coroutine_mixed_fn marker Emanuele Giuseppe Esposito (14): block-coroutine-wrapper: support void functions block: Convert bdrv_io_plug() to co_wrapper block: Convert bdrv_io_unplug() to co_wrapper block: Convert bdrv_is_inserted() to co_wrapper block: Rename refresh_total_sectors to bdrv_refresh_total_sectors block: Convert bdrv_refresh_total_sectors() to co_wrapper_mixed block-backend: use bdrv_getlength instead of blk_getlength block: use bdrv_co_refresh_total_sectors when possible block: Convert bdrv_get_allocated_file_size() to co_wrapper block: Convert bdrv_get_info() to co_wrapper_mixed block: Convert bdrv_eject() to co_wrapper block: Convert bdrv_lock_medium() to co_wrapper block: Convert bdrv_debug_event() to co_wrapper_mixed block: Rename bdrv_load/save_vmstate() to bdrv_co_load/save_vmstate() Hanna Reitz (12): block: Improve empty format-specific info dump block/file: Add file-specific image info block/vmdk: Change extent info type block: Split BlockNodeInfo off of ImageInfo qemu-img: Use BlockNodeInfo block/qapi: Let bdrv_query_image_info() recurse block/qapi: Introduce BlockGraphInfo block/qapi: Add indentation to bdrv_node_info_dump() iotests: Filter child node information iotests/106, 214, 308: Read only one size line qemu-img: Let info print block graph qemu-img: Change info key names for protocol nodes Kevin Wolf (4): qcow2: Fix theoretical corruption in store_bitmap() error path qemu-img commit: Report errors while closing the image qemu-img bitmap: Report errors while closing the image qemu-iotests: Test qemu-img bitmap/commit exit code on error Paolo Bonzini (2): qemu-io: do not reinvent the blk_pwrite_zeroes wheel block: remove bdrv_coroutine_enter Philippe Mathieu-Daudé (1): block/nbd: Add missing <qemu/bswap.h> include Thomas Huth (2): tests/qemu-iotests/312: Mark "quorum" as required driver tests/qemu-iotests/262: Check for availability of "blkverify" first Xiang Zheng (1): pflash: Only read non-zero parts of backend image qapi/block-core.json | 123 +++++++- include/block/block-common.h | 11 +- include/block/block-io.h | 41 ++- include/block/block_int-common.h | 26 +- include/block/block_int-io.h | 5 +- include/block/nbd.h | 1 + include/block/qapi.h | 14 +- include/qemu/osdep.h | 44 +++ include/sysemu/block-backend-io.h | 31 +- block.c | 88 +++--- block/blkdebug.c | 11 +- block/blkio.c | 15 +- block/blklogwrites.c | 6 +- block/blkreplay.c | 6 +- block/blkverify.c | 6 +- block/block-backend.c | 38 +-- block/commit.c | 4 +- block/copy-on-read.c | 18 +- block/crypto.c | 14 +- block/curl.c | 10 +- block/file-posix.c | 137 +++++---- block/file-win32.c | 18 +- block/filter-compress.c | 20 +- block/gluster.c | 23 +- block/io.c | 76 ++--- block/iscsi.c | 17 +- block/mirror.c | 6 +- block/monitor/block-hmp-cmds.c | 2 +- block/nbd.c | 8 +- block/nfs.c | 4 +- block/null.c | 13 +- block/nvme.c | 14 +- block/preallocate.c | 16 +- block/qapi.c | 317 ++++++++++++++++----- block/qcow.c | 5 +- block/qcow2-bitmap.c | 5 +- block/qcow2-refcount.c | 2 +- block/qcow2.c | 17 +- block/qed.c | 11 +- block/quorum.c | 8 +- block/raw-format.c | 25 +- block/rbd.c | 9 +- block/replication.c | 6 +- block/ssh.c | 4 +- block/throttle.c | 6 +- block/vdi.c | 7 +- block/vhdx.c | 5 +- block/vmdk.c | 22 +- block/vpc.c | 5 +- blockdev.c | 8 +- hw/block/block.c | 36 ++- hw/scsi/scsi-disk.c | 5 + qemu-img.c | 100 +++++-- qemu-io-cmds.c | 62 +--- tests/unit/test-block-iothread.c | 3 + scripts/block-coroutine-wrapper.py | 20 +- tests/qemu-iotests/iotests.py | 18 +- block/meson.build | 1 + tests/qemu-iotests/065 | 2 +- tests/qemu-iotests/106 | 4 +- tests/qemu-iotests/214 | 6 +- tests/qemu-iotests/262 | 3 +- tests/qemu-iotests/302.out | 5 + tests/qemu-iotests/308 | 4 +- tests/qemu-iotests/312 | 1 + tests/qemu-iotests/common.filter | 22 +- tests/qemu-iotests/common.rc | 22 +- tests/qemu-iotests/tests/qemu-img-close-errors | 96 +++++++ tests/qemu-iotests/tests/qemu-img-close-errors.out | 23 ++ 69 files changed, 1209 insertions(+), 552 deletions(-) create mode 100755 tests/qemu-iotests/tests/qemu-img-close-errors create mode 100644 tests/qemu-iotests/tests/qemu-img-close-errors.out