We found a case where the source passed to flatview_write_continue() may
overlap with the destination when fuzzing igb, a new proposed network
device with sanitizers.

igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
buffer. While pci_dma_write() is usually used to write data from
memory not mapped to the guest, if igb is configured to perform
loopback, the data will be sourced from the guest memory. The source and
destination can overlap and the usage of memcpy() will be invalid in
such a case.

While we do not really have to deal with such an invalid request for
igb, detecting the overlap in igb code beforehand requires complex code,
and only covers this specific case. Instead, just replace memcpy() with
memmove() to torelate overlaps. Using memmove() will slightly damage the
performance as it will need to check overlaps before using SIMD
instructions for copying, but the cost should be negiligble, considering
the inherent complexity of flatview_write_continue().

The test cases generated by the fuzzer is available at:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/

The fixed test case is:
fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 softmmu/physmem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/softmmu/physmem.c b/softmmu/physmem.c
index cb998cdf23..3cd27b1c9d 100644
--- a/softmmu/physmem.c
+++ b/softmmu/physmem.c
@@ -2828,7 +2828,7 @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr,
         } else {
             /* RAM case */
             ram_ptr = qemu_ram_ptr_length(mr->ram_block, addr1, &l, false);
-            memcpy(ram_ptr, buf, l);
+            memmove(ram_ptr, buf, l);
             invalidate_and_set_dirty(mr, addr1, l);
         }
 
-- 
2.39.1

On 30/1/23 14:51, Akihiko Odaki wrote:
> We found a case where the source passed to flatview_write_continue() may
> overlap with the destination when fuzzing igb, a new proposed network
> device with sanitizers.
> 
> igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
> buffer. While pci_dma_write() is usually used to write data from
> memory not mapped to the guest, if igb is configured to perform
> loopback, the data will be sourced from the guest memory. The source and
> destination can overlap and the usage of memcpy() will be invalid in
> such a case.
> 
> While we do not really have to deal with such an invalid request for
> igb, detecting the overlap in igb code beforehand requires complex code,
> and only covers this specific case. Instead, just replace memcpy() with
> memmove() to torelate overlaps. Using memmove() will slightly damage the

"tolerate"?

> performance as it will need to check overlaps before using SIMD
> instructions for copying, but the cost should be negiligble, considering

"negligible"

> the inherent complexity of flatview_write_continue().
> 
> The test cases generated by the fuzzer is available at:
> https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
> 
> The fixed test case is:
> fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805
> 
> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> ---
>   softmmu/physmem.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/softmmu/physmem.c b/softmmu/physmem.c
> index cb998cdf23..3cd27b1c9d 100644
> --- a/softmmu/physmem.c
> +++ b/softmmu/physmem.c
> @@ -2828,7 +2828,7 @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr,
>           } else {
>               /* RAM case */
>               ram_ptr = qemu_ram_ptr_length(mr->ram_block, addr1, &l, false);
> -            memcpy(ram_ptr, buf, l);
> +            memmove(ram_ptr, buf, l);
>               invalidate_and_set_dirty(mr, addr1, l);
>           }
>

On 230130 2251, Akihiko Odaki wrote:
> We found a case where the source passed to flatview_write_continue() may
> overlap with the destination when fuzzing igb, a new proposed network
> device with sanitizers.
> 
> igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
> buffer. While pci_dma_write() is usually used to write data from
> memory not mapped to the guest, if igb is configured to perform
> loopback, the data will be sourced from the guest memory. The source and
> destination can overlap and the usage of memcpy() will be invalid in
> such a case.
> 
> While we do not really have to deal with such an invalid request for
> igb, detecting the overlap in igb code beforehand requires complex code,
> and only covers this specific case. Instead, just replace memcpy() with
> memmove() to torelate overlaps. Using memmove() will slightly damage the
> performance as it will need to check overlaps before using SIMD
> instructions for copying, but the cost should be negiligble, considering
> the inherent complexity of flatview_write_continue().
> 
> The test cases generated by the fuzzer is available at:
> https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
> 
> The fixed test case is:
> fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805
> 
> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>

Since this is called fairly often, I went down a rabit hole looking at
memmove vs memcpy perf, but It looks like this should not be much of a
problem.

Acked-by: Akihiko Odaki <akihiko.odaki@daynix.com>

Thank you

> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> ---
>  softmmu/physmem.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/softmmu/physmem.c b/softmmu/physmem.c
> index cb998cdf23..3cd27b1c9d 100644
> --- a/softmmu/physmem.c
> +++ b/softmmu/physmem.c
> @@ -2828,7 +2828,7 @@ static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr,
>          } else {
>              /* RAM case */
>              ram_ptr = qemu_ram_ptr_length(mr->ram_block, addr1, &l, false);
> -            memcpy(ram_ptr, buf, l);
> +            memmove(ram_ptr, buf, l);
>              invalidate_and_set_dirty(mr, addr1, l);
>          }
>  
> -- 
> 2.39.1
>

On Mon, Jan 30, 2023 at 03:03:00PM -0500, Alexander Bulekov wrote:
> On 230130 2251, Akihiko Odaki wrote:
> > We found a case where the source passed to flatview_write_continue() may
> > overlap with the destination when fuzzing igb, a new proposed network
> > device with sanitizers.
> > 
> > igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
> > buffer. While pci_dma_write() is usually used to write data from
> > memory not mapped to the guest, if igb is configured to perform
> > loopback, the data will be sourced from the guest memory. The source and
> > destination can overlap and the usage of memcpy() will be invalid in
> > such a case.
> > 
> > While we do not really have to deal with such an invalid request for
> > igb, detecting the overlap in igb code beforehand requires complex code,
> > and only covers this specific case. Instead, just replace memcpy() with
> > memmove() to torelate overlaps. Using memmove() will slightly damage the
> > performance as it will need to check overlaps before using SIMD
> > instructions for copying, but the cost should be negiligble, considering
> > the inherent complexity of flatview_write_continue().
> > 
> > The test cases generated by the fuzzer is available at:
> > https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
> > 
> > The fixed test case is:
> > fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805
> > 
> > Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> 
> Since this is called fairly often, I went down a rabit hole looking at
> memmove vs memcpy perf, but It looks like this should not be much of a
> problem.

Similar here. I quickly had a look at the dump of memmove() and it seems to
me it's directly invoking the SIMD instructions.  I'm not sure whether it
means in many cases the SIMD insts are compatible with overlapped buffers
already, so it can be mostly the same as memcpy() in modern hardwares.

> 
> Acked-by: Akihiko Odaki <akihiko.odaki@daynix.com>

I received this reply from Alexander Bulekov, but I think this is the
author's contact?

Thanks,

-- 
Peter Xu

On 230130 1528, Peter Xu wrote:
> On Mon, Jan 30, 2023 at 03:03:00PM -0500, Alexander Bulekov wrote:
> > On 230130 2251, Akihiko Odaki wrote:
> > > We found a case where the source passed to flatview_write_continue() may
> > > overlap with the destination when fuzzing igb, a new proposed network
> > > device with sanitizers.
> > > 
> > > igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
> > > buffer. While pci_dma_write() is usually used to write data from
> > > memory not mapped to the guest, if igb is configured to perform
> > > loopback, the data will be sourced from the guest memory. The source and
> > > destination can overlap and the usage of memcpy() will be invalid in
> > > such a case.
> > > 
> > > While we do not really have to deal with such an invalid request for
> > > igb, detecting the overlap in igb code beforehand requires complex code,
> > > and only covers this specific case. Instead, just replace memcpy() with
> > > memmove() to torelate overlaps. Using memmove() will slightly damage the
> > > performance as it will need to check overlaps before using SIMD
> > > instructions for copying, but the cost should be negiligble, considering
> > > the inherent complexity of flatview_write_continue().
> > > 
> > > The test cases generated by the fuzzer is available at:
> > > https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
> > > 
> > > The fixed test case is:
> > > fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805
> > > 
> > > Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> > 
> > Since this is called fairly often, I went down a rabit hole looking at
> > memmove vs memcpy perf, but It looks like this should not be much of a
> > problem.
> 
> Similar here. I quickly had a look at the dump of memmove() and it seems to
> me it's directly invoking the SIMD instructions.  I'm not sure whether it
> means in many cases the SIMD insts are compatible with overlapped buffers
> already, so it can be mostly the same as memcpy() in modern hardwares.
> 
> > 
> > Acked-by: Akihiko Odaki <akihiko.odaki@daynix.com>
> 
> I received this reply from Alexander Bulekov, but I think this is the
> author's contact?

Sorry about that!
Acked-by: Alexander Bulekov <alxndr@bu.edu>

> 
> Thanks,
> 
> -- 
> Peter Xu
>

On Mon, Jan 30, 2023 at 10:51:52PM +0900, Akihiko Odaki wrote:
> We found a case where the source passed to flatview_write_continue() may
> overlap with the destination when fuzzing igb, a new proposed network
> device with sanitizers.
> 
> igb uses pci_dma_map() to get Tx packet, and pci_dma_write() to write Rx
> buffer. While pci_dma_write() is usually used to write data from
> memory not mapped to the guest, if igb is configured to perform
> loopback, the data will be sourced from the guest memory. The source and
> destination can overlap and the usage of memcpy() will be invalid in
> such a case.
> 
> While we do not really have to deal with such an invalid request for
> igb, detecting the overlap in igb code beforehand requires complex code,
> and only covers this specific case. Instead, just replace memcpy() with
> memmove() to torelate overlaps. Using memmove() will slightly damage the
> performance as it will need to check overlaps before using SIMD
> instructions for copying, but the cost should be negiligble, considering
> the inherent complexity of flatview_write_continue().
> 
> The test cases generated by the fuzzer is available at:
> https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
> 
> The fixed test case is:
> fuzz/crash_47dfe62d9f911bf523ff48cd441b61c0013ed805
> 
> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>

Acked-by: Peter Xu <peterx@redhat.com>

-- 
Peter Xu