Hi Peter! The following changes since commit 13356edb87506c148b163b8c7eb0695647d00c2a: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-01-24 09:45:33 +0000) are available in the Git repository at: https://gitlab.com/thuth/qemu.git tags/pull-request-2023-01-31 for you to fetch changes up to e030d08c2fc02743dd37e3d2e6e28fdd739590b9: gitlab-ci.d/buildtest: Merge the --without-default-* jobs (2023-01-31 09:05:26 +0100) ---------------------------------------------------------------- * qtest improvements * Remove the deprecated OTP config of sifive_u * Add libfdt to some of our CI jobs that were still missing it * Use __builtin_bswap() everywhere (all compiler versions support it now) * Deprecate the HAXM accelerator * Document PCI devices handling on s390x * Make Audiodev introspectable * Improve the runtime of some CI jobs ---------------------------------------------------------------- Daniel P. Berrangé (2): qapi, audio: add query-audiodev command qapi, audio: Make introspection reflect build configuration more closely Fabiano Rosas (1): tests/tcg: Do not build/run TCG tests if TCG is disabled Laurent Vivier (1): tests/qtest: netdev: test stream and dgram backends Philippe Mathieu-Daudé (10): qemu/bswap: Replace bswapXX() by compiler __builtin_bswap() qemu/bswap: Replace bswapXXs() by compiler __builtin_bswap() qemu/bswap: Remove <byteswap.h> dependency qemu/bswap: Use compiler __builtin_bswap() on Haiku qemu/bswap: Use compiler __builtin_bswap() on FreeBSD qemu/bswap: Use compiler __builtin_bswap() on NetBSD tests/qtest/vnc-display-test: Suppress build warnings on Windows tests/qtest/vnc-display-test: Use the 'none' machine tests/qtest/vnc-display-test: Disable on Darwin tests/qtest/boot-serial-test: Constify tests[] array Sebastian Mitterle (1): docs/s390x/pcidevices: document pci devices on s390x Thomas Huth (11): tests/qtest/qom-test: Stop spamming the test log tests/qtest/bios-tables-test: Make the test less verbose by default hw/misc/sifive_u_otp: Remove the deprecated OTP config with '-drive if=none' configs/targets/nios2-softmmu: Add TARGET_NEED_FDT=y to the nios2 config travis.yml: Use the libfdt from the distro instead of the submodule travis.yml: Remove the generic addons section tests/docker/dockerfiles: Add libfdt to the i386 and to the riscv64 container docs/about/deprecated: Mark HAXM in QEMU as deprecated gitlab-ci.d/buildtest: Remove ppc-softmmu from the clang-system job tests/qtest/display-vga-test: Add proper checks if a device is available gitlab-ci.d/buildtest: Merge the --without-default-* jobs Wenchao Wang (1): MAINTAINERS: Abort HAXM maintenance MAINTAINERS | 5 +- docs/about/deprecated.rst | 12 +- docs/about/removed-features.rst | 7 + docs/system/s390x/pcidevices.rst | 41 ++ docs/system/target-s390x.rst | 1 + configure | 6 +- configs/targets/nios2-softmmu.mak | 1 + meson.build | 6 - qapi/audio.json | 57 ++- audio/audio_template.h | 20 + include/qemu/bswap.h | 83 +--- audio/audio.c | 32 ++ audio/audio_legacy.c | 41 +- hw/misc/sifive_u_otp.c | 7 - target/i386/hax/hax-all.c | 3 + tests/qtest/bios-tables-test.c | 17 +- tests/qtest/boot-serial-test.c | 2 +- tests/qtest/display-vga-test.c | 65 ++- tests/qtest/netdev-socket.c | 448 +++++++++++++++++++++ tests/qtest/qom-test.c | 12 +- tests/qtest/vnc-display-test.c | 9 +- .gitlab-ci.d/buildtest.yml | 20 +- .travis.yml | 59 +-- .../docker/dockerfiles/debian-riscv64-cross.docker | 1 + tests/docker/dockerfiles/fedora-i386-cross.docker | 1 + tests/qtest/meson.build | 2 + 26 files changed, 743 insertions(+), 215 deletions(-) create mode 100644 docs/system/s390x/pcidevices.rst create mode 100644 tests/qtest/netdev-socket.c From: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20230118120405.1876329-1-lvivier@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/netdev-socket.c | 448 ++++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 2 + 2 files changed, 450 insertions(+) create mode 100644 tests/qtest/netdev-socket.c diff --git a/tests/qtest/netdev-socket.c b/tests/qtest/netdev-socket.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/netdev-socket.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for netdev stream and dgram + * + * Copyright (c) 2022 Red Hat, Inc. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/sockets.h" +#include <glib/gstdio.h> +#include "../unit/socket-helpers.h" +#include "libqtest.h" + +#define CONNECTION_TIMEOUT 5 + +#define EXPECT_STATE(q, e, t) \ +do { \ + char *resp = NULL; \ + g_test_timer_start(); \ + do { \ + g_free(resp); \ + resp = qtest_hmp(q, "info network"); \ + if (t) { \ + strrchr(resp, t)[0] = 0; \ + } \ + if (g_str_equal(resp, e)) { \ + break; \ + } \ + } while (g_test_timer_elapsed() < CONNECTION_TIMEOUT); \ + g_assert_cmpstr(resp, ==, e); \ + g_free(resp); \ +} while (0) + +static gchar *tmpdir; + +static int inet_get_free_port_socket_ipv4(int sock) +{ + struct sockaddr_in addr; + socklen_t len; + + memset(&addr, 0, sizeof(addr)); + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = INADDR_ANY; + addr.sin_port = 0; + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + return -1; + } + + len = sizeof(addr); + if (getsockname(sock, (struct sockaddr *)&addr, &len) < 0) { + return -1; + } + + return ntohs(addr.sin_port); +} + +static int inet_get_free_port_socket_ipv6(int sock) +{ + struct sockaddr_in6 addr; + socklen_t len; + + memset(&addr, 0, sizeof(addr)); + addr.sin6_family = AF_INET6; + addr.sin6_addr = in6addr_any; + addr.sin6_port = 0; + if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { + return -1; + } + + len = sizeof(addr); + if (getsockname(sock, (struct sockaddr *)&addr, &len) < 0) { + return -1; + } + + return ntohs(addr.sin6_port); +} + +static int inet_get_free_port_multiple(int nb, int *port, bool ipv6) +{ + int sock[nb]; + int i; + + for (i = 0; i < nb; i++) { + sock[i] = socket(ipv6 ? AF_INET6 : AF_INET, SOCK_STREAM, 0); + if (sock[i] < 0) { + break; + } + port[i] = ipv6 ? inet_get_free_port_socket_ipv6(sock[i]) : + inet_get_free_port_socket_ipv4(sock[i]); + if (port[i] == -1) { + break; + } + } + + nb = i; + for (i = 0; i < nb; i++) { + closesocket(sock[i]); + } + + return nb; +} + +static int inet_get_free_port(bool ipv6) +{ + int nb, port; + + nb = inet_get_free_port_multiple(1, &port, ipv6); + g_assert_cmpint(nb, ==, 1); + + return port; +} + +static void test_stream_inet_ipv4(void) +{ + QTestState *qts0, *qts1; + char *expect; + int port; + + port = inet_get_free_port(false); + qts0 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=true,addr.type=inet," + "addr.ipv4=on,addr.ipv6=off," + "addr.host=127.0.0.1,addr.port=%d", port); + + EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev stream,server=false,id=st0,addr.type=inet," + "addr.ipv4=on,addr.ipv6=off," + "addr.host=127.0.0.1,addr.port=%d", port); + + expect = g_strdup_printf("st0: index=0,type=stream,tcp:127.0.0.1:%d\r\n", + port); + EXPECT_STATE(qts1, expect, 0); + g_free(expect); + + /* the port is unknown, check only the address */ + EXPECT_STATE(qts0, "st0: index=0,type=stream,tcp:127.0.0.1", ':'); + + qtest_quit(qts1); + qtest_quit(qts0); +} + +static void test_stream_inet_ipv6(void) +{ + QTestState *qts0, *qts1; + char *expect; + int port; + + port = inet_get_free_port(true); + qts0 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=true,addr.type=inet," + "addr.ipv4=off,addr.ipv6=on," + "addr.host=::1,addr.port=%d", port); + + EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev stream,server=false,id=st0,addr.type=inet," + "addr.ipv4=off,addr.ipv6=on," + "addr.host=::1,addr.port=%d", port); + + expect = g_strdup_printf("st0: index=0,type=stream,tcp:::1:%d\r\n", + port); + EXPECT_STATE(qts1, expect, 0); + g_free(expect); + + /* the port is unknown, check only the address */ + EXPECT_STATE(qts0, "st0: index=0,type=stream,tcp:::1", ':'); + + qtest_quit(qts1); + qtest_quit(qts0); +} + +static void test_stream_unix(void) +{ + QTestState *qts0, *qts1; + char *expect; + gchar *path; + + path = g_strconcat(tmpdir, "/stream_unix", NULL); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=true," + "addr.type=unix,addr.path=%s,", + path); + + EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=false," + "addr.type=unix,addr.path=%s", + path); + + expect = g_strdup_printf("st0: index=0,type=stream,unix:%s\r\n", path); + EXPECT_STATE(qts1, expect, 0); + EXPECT_STATE(qts0, expect, 0); + g_free(expect); + g_free(path); + + qtest_quit(qts1); + qtest_quit(qts0); +} + +#ifdef CONFIG_LINUX +static void test_stream_unix_abstract(void) +{ + QTestState *qts0, *qts1; + char *expect; + gchar *path; + + path = g_strconcat(tmpdir, "/stream_unix_abstract", NULL); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=true," + "addr.type=unix,addr.path=%s," + "addr.abstract=on", + path); + + EXPECT_STATE(qts0, "st0: index=0,type=stream,\r\n", 0); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,server=false," + "addr.type=unix,addr.path=%s,addr.abstract=on", + path); + + expect = g_strdup_printf("st0: index=0,type=stream,unix:%s\r\n", path); + EXPECT_STATE(qts1, expect, 0); + EXPECT_STATE(qts0, expect, 0); + g_free(expect); + g_free(path); + + qtest_quit(qts1); + qtest_quit(qts0); +} +#endif + +#ifndef _WIN32 +static void test_stream_fd(void) +{ + QTestState *qts0, *qts1; + int sock[2]; + int ret; + + ret = socketpair(AF_LOCAL, SOCK_STREAM, 0, sock); + g_assert_true(ret == 0); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,addr.type=fd,addr.str=%d", + sock[0]); + + EXPECT_STATE(qts0, "st0: index=0,type=stream,unix:\r\n", 0); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev stream,id=st0,addr.type=fd,addr.str=%d", + sock[1]); + + EXPECT_STATE(qts1, "st0: index=0,type=stream,unix:\r\n", 0); + EXPECT_STATE(qts0, "st0: index=0,type=stream,unix:\r\n", 0); + + qtest_quit(qts1); + qtest_quit(qts0); + + closesocket(sock[0]); + closesocket(sock[1]); +} +#endif + +static void test_dgram_inet(void) +{ + QTestState *qts0, *qts1; + char *expect; + int port[2]; + int nb; + + nb = inet_get_free_port_multiple(2, port, false); + g_assert_cmpint(nb, ==, 2); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0," + "local.type=inet,local.host=127.0.0.1,local.port=%d," + "remote.type=inet,remote.host=127.0.0.1,remote.port=%d", + port[0], port[1]); + + expect = g_strdup_printf("st0: index=0,type=dgram," + "udp=127.0.0.1:%d/127.0.0.1:%d\r\n", + port[0], port[1]); + EXPECT_STATE(qts0, expect, 0); + g_free(expect); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0," + "local.type=inet,local.host=127.0.0.1,local.port=%d," + "remote.type=inet,remote.host=127.0.0.1,remote.port=%d", + port[1], port[0]); + + expect = g_strdup_printf("st0: index=0,type=dgram," + "udp=127.0.0.1:%d/127.0.0.1:%d\r\n", + port[1], port[0]); + EXPECT_STATE(qts1, expect, 0); + g_free(expect); + + qtest_quit(qts1); + qtest_quit(qts0); +} + +#ifndef _WIN32 +static void test_dgram_mcast(void) +{ + QTestState *qts; + + qts = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0," + "remote.type=inet,remote.host=230.0.0.1,remote.port=1234"); + + EXPECT_STATE(qts, "st0: index=0,type=dgram,mcast=230.0.0.1:1234\r\n", 0); + + qtest_quit(qts); +} + +static void test_dgram_unix(void) +{ + QTestState *qts0, *qts1; + char *expect; + gchar *path0, *path1; + + path0 = g_strconcat(tmpdir, "/dgram_unix0", NULL); + path1 = g_strconcat(tmpdir, "/dgram_unix1", NULL); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0,local.type=unix,local.path=%s," + "remote.type=unix,remote.path=%s", + path0, path1); + + expect = g_strdup_printf("st0: index=0,type=dgram,udp=%s:%s\r\n", + path0, path1); + EXPECT_STATE(qts0, expect, 0); + g_free(expect); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0,local.type=unix,local.path=%s," + "remote.type=unix,remote.path=%s", + path1, path0); + + + expect = g_strdup_printf("st0: index=0,type=dgram,udp=%s:%s\r\n", + path1, path0); + EXPECT_STATE(qts1, expect, 0); + g_free(expect); + + unlink(path0); + g_free(path0); + unlink(path1); + g_free(path1); + + qtest_quit(qts1); + qtest_quit(qts0); +} + +static void test_dgram_fd(void) +{ + QTestState *qts0, *qts1; + char *expect; + int ret; + int sv[2]; + + ret = socketpair(PF_UNIX, SOCK_DGRAM, 0, sv); + g_assert_cmpint(ret, !=, -1); + + qts0 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0,local.type=fd,local.str=%d", + sv[0]); + + expect = g_strdup_printf("st0: index=0,type=dgram,fd=%d unix\r\n", sv[0]); + EXPECT_STATE(qts0, expect, 0); + g_free(expect); + + qts1 = qtest_initf("-nodefaults -M none " + "-netdev dgram,id=st0,local.type=fd,local.str=%d", + sv[1]); + + + expect = g_strdup_printf("st0: index=0,type=dgram,fd=%d unix\r\n", sv[1]); + EXPECT_STATE(qts1, expect, 0); + g_free(expect); + + qtest_quit(qts1); + qtest_quit(qts0); + + closesocket(sv[0]); + closesocket(sv[1]); +} +#endif + +int main(int argc, char **argv) +{ + int ret; + bool has_ipv4, has_ipv6, has_afunix; + g_autoptr(GError) err = NULL; + + socket_init(); + g_test_init(&argc, &argv, NULL); + + if (socket_check_protocol_support(&has_ipv4, &has_ipv6) < 0) { + g_error("socket_check_protocol_support() failed\n"); + } + + tmpdir = g_dir_make_tmp("netdev-socket.XXXXXX", &err); + if (tmpdir == NULL) { + g_error("Can't create temporary directory in %s: %s", + g_get_tmp_dir(), err->message); + } + + if (has_ipv4) { + qtest_add_func("/netdev/stream/inet/ipv4", test_stream_inet_ipv4); + qtest_add_func("/netdev/dgram/inet", test_dgram_inet); +#ifndef _WIN32 + qtest_add_func("/netdev/dgram/mcast", test_dgram_mcast); +#endif + } + if (has_ipv6) { + qtest_add_func("/netdev/stream/inet/ipv6", test_stream_inet_ipv6); + } + + socket_check_afunix_support(&has_afunix); + if (has_afunix) { +#ifndef _WIN32 + qtest_add_func("/netdev/dgram/unix", test_dgram_unix); +#endif + qtest_add_func("/netdev/stream/unix", test_stream_unix); +#ifdef CONFIG_LINUX + qtest_add_func("/netdev/stream/unix/abstract", + test_stream_unix_abstract); +#endif +#ifndef _WIN32 + qtest_add_func("/netdev/stream/fd", test_stream_fd); + qtest_add_func("/netdev/dgram/fd", test_dgram_fd); +#endif + } + + ret = g_test_run(); + + g_rmdir(tmpdir); + g_free(tmpdir); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_generic = [ 'test-hmp', 'qos-test', 'readconfig-test', + 'netdev-socket', ] if config_host.has_key('CONFIG_MODULES') qtests_generic += [ 'modules-test' ] @@ -XXX,XX +XXX,XX @@ qtests = { 'tpm-tis-device-swtpm-test': [io, tpmemu_files, 'tpm-tis-util.c'], 'tpm-tis-device-test': [io, tpmemu_files, 'tpm-tis-util.c'], 'vmgenid-test': files('boot-sector.c', 'acpi-utils.c'), + 'netdev-socket': files('netdev-socket.c', '../unit/socket-helpers.c'), } gvnc = dependency('gvnc-1.0', required: false) -- 2.31.1 We are still facing the issues that our test logs in the gitlab CI are too big (and thus cut off). A huge part is still caused by the qom-test that prints the path and name of each object it looks at by default. That's too much. Let's be silent by default, and only print the object path+name when running with V=2 (and the properties only with V=3 and higher). Message-Id: <20230118122557.1668860-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/qom-test.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/tests/qtest/qom-test.c b/tests/qtest/qom-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/qom-test.c +++ b/tests/qtest/qom-test.c @@ -XXX,XX +XXX,XX @@ #include "qemu/cutils.h" #include "libqtest.h" -static bool verbose; +static int verbosity_level; static void test_properties(QTestState *qts, const char *path, bool recurse) { @@ -XXX,XX +XXX,XX @@ static void test_properties(QTestState *qts, const char *path, bool recurse) QListEntry *entry; GSList *children = NULL, *links = NULL; - g_test_message("Obtaining properties of %s", path); + if (verbosity_level >= 2) { + g_test_message("Obtaining properties of %s", path); + } response = qtest_qmp(qts, "{ 'execute': 'qom-list'," " 'arguments': { 'path': %s } }", path); g_assert(response); @@ -XXX,XX +XXX,XX @@ static void test_properties(QTestState *qts, const char *path, bool recurse) } } else { const char *prop = qdict_get_str(tuple, "name"); - if (verbose) { + if (verbosity_level >= 3) { g_test_message("-> %s", prop); } tmp = qtest_qmp(qts, @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) { char *v_env = getenv("V"); - if (v_env && atoi(v_env) >= 2) { - verbose = true; + if (v_env) { + verbosity_level = atoi(v_env); } g_test_init(&argc, &argv, NULL); -- 2.31.1 We are facing the issues that our test logs in the gitlab CI are too big (and thus cut off). The bios-tables-test is one of the few qtests that prints many lines of output by default when running with V=1, so it contributes to this problem. Almost all other qtests are silent with V=1 and only print debug messages with V=2 and higher. Thus let's change the bios-tables-test to behave more like the other tests and only print the debug messages with V=2 (or higher). Message-Id: <20230118125132.1694469-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/bios-tables-test.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/tests/qtest/bios-tables-test.c b/tests/qtest/bios-tables-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test.c +++ b/tests/qtest/bios-tables-test.c @@ -XXX,XX +XXX,XX @@ * You will also notice that tests/qtest/bios-tables-test-allowed-diff.h lists * a bunch of files. This is your hint that you need to do the below: * 4. Run - * make check V=1 + * make check V=2 * this will produce a bunch of warnings about differences * beween actual and expected ACPI tables. If you have IASL installed, * they will also be disassembled so you can look at the disassembled @@ -XXX,XX +XXX,XX @@ static const char *iasl = CONFIG_IASL; static const char *iasl; #endif +static int verbosity_level; + static bool compare_signature(const AcpiSdtTable *sdt, const char *signature) { return !memcmp(sdt->aml, signature, 4); @@ -XXX,XX +XXX,XX @@ static GArray *load_expected_aml(test_data *data) gsize aml_len; GArray *exp_tables = g_array_new(false, true, sizeof(AcpiSdtTable)); - if (getenv("V")) { + if (verbosity_level >= 2) { fputc('\n', stderr); } for (i = 0; i < data->tables->len; ++i) { @@ -XXX,XX +XXX,XX @@ static GArray *load_expected_aml(test_data *data) try_again: aml_file = g_strdup_printf("%s/%s/%.4s%s", data_dir, data->machine, sdt->aml, ext); - if (getenv("V")) { + if (verbosity_level >= 2) { fprintf(stderr, "Looking for expected file '%s'\n", aml_file); } if (g_file_test(aml_file, G_FILE_TEST_EXISTS)) { @@ -XXX,XX +XXX,XX @@ try_again: goto try_again; } g_assert(exp_sdt.aml_file); - if (getenv("V")) { + if (verbosity_level >= 2) { fprintf(stderr, "Using expected file '%s'\n", aml_file); } ret = g_file_get_contents(aml_file, (gchar **)&exp_sdt.aml, @@ -XXX,XX +XXX,XX @@ static void test_acpi_asl(test_data *data) exp_sdt->aml, sdt->asl_file, sdt->aml_file, exp_sdt->asl_file, exp_sdt->aml_file); fflush(stderr); - if (getenv("V")) { + if (verbosity_level >= 1) { const char *diff_env = getenv("DIFF"); const char *diff_cmd = diff_env ? diff_env : "diff -U 16"; char *diff = g_strdup_printf("%s %s %s", diff_cmd, @@ -XXX,XX +XXX,XX @@ int main(int argc, char *argv[]) const char *arch = qtest_get_arch(); const bool has_kvm = qtest_has_accel("kvm"); const bool has_tcg = qtest_has_accel("tcg"); + char *v_env = getenv("V"); int ret; + if (v_env) { + verbosity_level = atoi(v_env); + } + g_test_init(&argc, &argv, NULL); if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) { -- 2.31.1 '-drive if=none' is meant for configuring back-end devices only, so this got marked as deprecated in QEMU 6.2. Users should now only use the new way with '-drive if=pflash' instead. Message-Id: <20230112083921.887828-1-thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- docs/about/deprecated.rst | 6 ------ docs/about/removed-features.rst | 7 +++++++ hw/misc/sifive_u_otp.c | 7 ------- 3 files changed, 7 insertions(+), 13 deletions(-) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ as short-form boolean values, and passed to plugins as ``arg_name=on``. However, short-form booleans are deprecated and full explicit ``arg_name=on`` form is preferred. -``-drive if=none`` for the sifive_u OTP device (since 6.2) -'''''''''''''''''''''''''''''''''''''''''''''''''''''''''' - -Using ``-drive if=none`` to configure the OTP device of the sifive_u -RISC-V machine is deprecated. Use ``-drive if=pflash`` instead. - ``-no-hpet`` (since 8.0) '''''''''''''''''''''''' diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -XXX,XX +XXX,XX @@ the value is hexadecimal. That is, '0x20M' should be written either as ``tty`` and ``parport`` used to be aliases for ``serial`` and ``parallel`` respectively. The actual backend names should be used instead. +``-drive if=none`` for the sifive_u OTP device (removed in 8.0) +''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' + +Use ``-drive if=pflash`` to configure the OTP device of the sifive_u +RISC-V machine instead. + + QEMU Machine Protocol (QMP) commands ------------------------------------ diff --git a/hw/misc/sifive_u_otp.c b/hw/misc/sifive_u_otp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sifive_u_otp.c +++ b/hw/misc/sifive_u_otp.c @@ -XXX,XX +XXX,XX @@ static void sifive_u_otp_realize(DeviceState *dev, Error **errp) sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!dinfo) { - dinfo = drive_get(IF_NONE, 0, 0); - if (dinfo) { - warn_report("using \"-drive if=none\" for the OTP is deprecated, " - "use \"-drive if=pflash\" instead."); - } - } if (dinfo) { int ret; uint64_t perm; -- 2.31.1 qemu-system-nios2 uses the functions from libfdt in hw/nios2/boot.c, so this target has to be marked with TARGET_NEED_FDT=y in its config file. Message-Id: <20230119125745.2028814-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- configs/targets/nios2-softmmu.mak | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/targets/nios2-softmmu.mak b/configs/targets/nios2-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/targets/nios2-softmmu.mak +++ b/configs/targets/nios2-softmmu.mak @@ -XXX,XX +XXX,XX @@ TARGET_ARCH=nios2 TARGET_ALIGNED_ONLY=y +TARGET_NEED_FDT=y -- 2.31.1 No need to compile-test third party submodules over and over again if we can simply use the pre-build library from the distribution instead. By also adding --enable-fdt=system to the configure options, we can also avoid to check out the "dtc" submodule here. Message-Id: <20230120075330.2076773-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- .travis.yml | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/.travis.yml b/.travis.yml index XXXXXXX..XXXXXXX 100644 --- a/.travis.yml +++ b/.travis.yml @@ -XXX,XX +XXX,XX @@ jobs: - libbrlapi-dev - libcacard-dev - libcap-ng-dev + - libfdt-dev - libgcrypt20-dev - libgnutls28-dev - libgtk-3-dev @@ -XXX,XX +XXX,XX @@ jobs: - genisoimage env: - TEST_CMD="make check check-tcg V=1" - - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS} --cxx=/bin/false" + - CONFIG="--disable-containers --enable-fdt=system + --target-list=${MAIN_SOFTMMU_TARGETS} --cxx=/bin/false" - UNRELIABLE=true - name: "[ppc64] GCC check-tcg" @@ -XXX,XX +XXX,XX @@ jobs: - libbrlapi-dev - libcacard-dev - libcap-ng-dev + - libfdt-dev - libgcrypt20-dev - libgnutls28-dev - libgtk-3-dev @@ -XXX,XX +XXX,XX @@ jobs: - genisoimage env: - TEST_CMD="make check check-tcg V=1" - - CONFIG="--disable-containers --target-list=ppc64-softmmu,ppc64le-linux-user" + - CONFIG="--disable-containers --enable-fdt=system + --target-list=ppc64-softmmu,ppc64le-linux-user" - name: "[s390x] GCC check-tcg" arch: s390x @@ -XXX,XX +XXX,XX @@ jobs: - libbrlapi-dev - libcacard-dev - libcap-ng-dev + - libfdt-dev - libgcrypt20-dev - libgnutls28-dev - libgtk-3-dev @@ -XXX,XX +XXX,XX @@ jobs: - genisoimage env: - TEST_CMD="make check check-tcg V=1" - - CONFIG="--disable-containers --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user" + - CONFIG="--disable-containers --enable-fdt=system + --target-list=${MAIN_SOFTMMU_TARGETS},s390x-linux-user" - UNRELIABLE=true script: - BUILD_RC=0 && make -j${JOBS} || BUILD_RC=$? @@ -XXX,XX +XXX,XX @@ jobs: - libattr1-dev - libcacard-dev - libcap-ng-dev + - libfdt-dev - libgnutls28-dev - libiscsi-dev - liblttng-ust-dev @@ -XXX,XX +XXX,XX @@ jobs: # Tests dependencies - genisoimage env: - - CONFIG="--disable-containers --audio-drv-list=sdl --disable-user - --target-list-exclude=${MAIN_SOFTMMU_TARGETS}" + - CONFIG="--disable-containers --enable-fdt=system --audio-drv-list=sdl + --disable-user --target-list-exclude=${MAIN_SOFTMMU_TARGETS}" - name: "[s390x] GCC (user)" arch: s390x @@ -XXX,XX +XXX,XX @@ jobs: - libbrlapi-dev - libcacard-dev - libcap-ng-dev + - libfdt-dev - libgcrypt20-dev - libgnutls28-dev - libgtk-3-dev @@ -XXX,XX +XXX,XX @@ jobs: - ninja-build env: - TEST_CMD="make check-unit" - - CONFIG="--disable-containers --disable-tcg --enable-kvm - --disable-tools --host-cc=clang --cxx=clang++" + - CONFIG="--disable-containers --disable-tcg --enable-kvm --disable-tools + --enable-fdt=system --host-cc=clang --cxx=clang++" - UNRELIABLE=true -- 2.31.1 Each job uses its own addons section nowadays, so the generic section is completely unused and outdated, thus we can remove it now. Message-Id: <20230119135914.2040853-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- .travis.yml | 37 ------------------------------------- 1 file changed, 37 deletions(-) diff --git a/.travis.yml b/.travis.yml index XXXXXXX..XXXXXXX 100644 --- a/.travis.yml +++ b/.travis.yml @@ -XXX,XX +XXX,XX @@ cache: - $HOME/avocado/data/cache -addons: - apt: - packages: - # Build dependencies - - libaio-dev - - libattr1-dev - - libbrlapi-dev - - libcap-ng-dev - - libcacard-dev - - libgcc-7-dev - - libgnutls28-dev - - libgtk-3-dev - - libiscsi-dev - - liblttng-ust-dev - - libncurses5-dev - - libnfs-dev - - libpixman-1-dev - - libpng-dev - - librados-dev - - libsdl2-dev - - libsdl2-image-dev - - libseccomp-dev - - libspice-protocol-dev - - libspice-server-dev - - libssh-dev - - liburcu-dev - - libusb-1.0-0-dev - - libvdeplug-dev - - libvte-2.91-dev - - libzstd-dev - - ninja-build - - sparse - - uuid-dev - # Tests dependencies - - genisoimage - - # The channel name "irc.oftc.net#qemu" is encrypted against qemu/qemu # to prevent IRC notifications from forks. This was created using: # $ travis encrypt -r "qemu/qemu" "irc.oftc.net#qemu" -- 2.31.1 No need to recompile the dtc submodule here again and again, we can use the pre-built binary from the distribution instead. (And this will also help in case we finally get rid of the dtc submodule in QEMU one day) Message-Id: <20230124143824.844040-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/docker/dockerfiles/debian-riscv64-cross.docker | 1 + tests/docker/dockerfiles/fedora-i386-cross.docker | 1 + 2 files changed, 2 insertions(+) diff --git a/tests/docker/dockerfiles/debian-riscv64-cross.docker b/tests/docker/dockerfiles/debian-riscv64-cross.docker index XXXXXXX..XXXXXXX 100644 --- a/tests/docker/dockerfiles/debian-riscv64-cross.docker +++ b/tests/docker/dockerfiles/debian-riscv64-cross.docker @@ -XXX,XX +XXX,XX @@ RUN apt update && \ apt install -y --no-install-recommends \ gcc-riscv64-linux-gnu \ libc6-dev-riscv64-cross \ + libfdt-dev:riscv64 \ libffi-dev:riscv64 \ libglib2.0-dev:riscv64 \ libpixman-1-dev:riscv64 diff --git a/tests/docker/dockerfiles/fedora-i386-cross.docker b/tests/docker/dockerfiles/fedora-i386-cross.docker index XXXXXXX..XXXXXXX 100644 --- a/tests/docker/dockerfiles/fedora-i386-cross.docker +++ b/tests/docker/dockerfiles/fedora-i386-cross.docker @@ -XXX,XX +XXX,XX @@ ENV PACKAGES \ findutils \ gcc \ git \ + libfdt-devel.i686 \ libffi-devel.i686 \ libselinux-devel.i686 \ libtasn1-devel.i686 \ -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use the compiler built-in function to byte swap values, as the compiler is clever and will fold constants. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- include/qemu/bswap.h | 31 ++++++------------------------- 1 file changed, 6 insertions(+), 25 deletions(-) diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t bswap64(uint64_t x) #endif #ifdef BSWAP_FROM_FALLBACKS -static inline uint16_t bswap16(uint16_t x) -{ - return (((x & 0x00ff) << 8) | - ((x & 0xff00) >> 8)); -} - -static inline uint32_t bswap32(uint32_t x) -{ - return (((x & 0x000000ffU) << 24) | - ((x & 0x0000ff00U) << 8) | - ((x & 0x00ff0000U) >> 8) | - ((x & 0xff000000U) >> 24)); -} - -static inline uint64_t bswap64(uint64_t x) -{ - return (((x & 0x00000000000000ffULL) << 56) | - ((x & 0x000000000000ff00ULL) << 40) | - ((x & 0x0000000000ff0000ULL) << 24) | - ((x & 0x00000000ff000000ULL) << 8) | - ((x & 0x000000ff00000000ULL) >> 8) | - ((x & 0x0000ff0000000000ULL) >> 24) | - ((x & 0x00ff000000000000ULL) >> 40) | - ((x & 0xff00000000000000ULL) >> 56)); -} +#undef bswap16 +#define bswap16(_x) __builtin_bswap16(_x) +#undef bswap32 +#define bswap32(_x) __builtin_bswap32(_x) +#undef bswap64 +#define bswap64(_x) __builtin_bswap64(_x) #endif #undef BSWAP_FROM_BYTESWAP -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-3-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- include/qemu/bswap.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ static inline uint64_t bswap64(uint64_t x) static inline void bswap16s(uint16_t *s) { - *s = bswap16(*s); + *s = __builtin_bswap16(*s); } static inline void bswap32s(uint32_t *s) { - *s = bswap32(*s); + *s = __builtin_bswap32(*s); } static inline void bswap64s(uint64_t *s) { - *s = bswap64(*s); + *s = __builtin_bswap64(*s); } #if HOST_BIG_ENDIAN #define be_bswap(v, size) (v) -#define le_bswap(v, size) glue(bswap, size)(v) +#define le_bswap(v, size) glue(__builtin_bswap, size)(v) #define be_bswaps(v, size) -#define le_bswaps(p, size) do { *p = glue(bswap, size)(*p); } while(0) +#define le_bswaps(p, size) \ + do { *p = glue(__builtin_bswap, size)(*p); } while (0) #else #define le_bswap(v, size) (v) -#define be_bswap(v, size) glue(bswap, size)(v) +#define be_bswap(v, size) glue(__builtin_bswap, size)(v) #define le_bswaps(v, size) -#define be_bswaps(p, size) do { *p = glue(bswap, size)(*p); } while(0) +#define be_bswaps(p, size) \ + do { *p = glue(__builtin_bswap, size)(*p); } while (0) #endif /** -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Drop the <byteswap.h> dependency. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-4-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- meson.build | 2 -- include/qemu/bswap.h | 21 --------------------- 2 files changed, 23 deletions(-) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if rdma.found() endif # has_header_symbol -config_host_data.set('CONFIG_BYTESWAP_H', - cc.has_header_symbol('byteswap.h', 'bswap_32')) config_host_data.set('CONFIG_EPOLL_CREATE1', cc.has_header_symbol('sys/epoll.h', 'epoll_create1')) config_host_data.set('CONFIG_FALLOCATE_PUNCH_HOLE', diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ # include <sys/endian.h> #elif defined(__HAIKU__) # include <endian.h> -#elif defined(CONFIG_BYTESWAP_H) -# include <byteswap.h> -#define BSWAP_FROM_BYTESWAP # else #define BSWAP_FROM_FALLBACKS #endif /* ! CONFIG_MACHINE_BSWAP_H */ @@ -XXX,XX +XXX,XX @@ extern "C" { #endif -#ifdef BSWAP_FROM_BYTESWAP -static inline uint16_t bswap16(uint16_t x) -{ - return bswap_16(x); -} - -static inline uint32_t bswap32(uint32_t x) -{ - return bswap_32(x); -} - -static inline uint64_t bswap64(uint64_t x) -{ - return bswap_64(x); -} -#endif - #ifdef BSWAP_FROM_FALLBACKS #undef bswap16 #define bswap16(_x) __builtin_bswap16(_x) @@ -XXX,XX +XXX,XX @@ static inline uint64_t bswap64(uint64_t x) #define bswap64(_x) __builtin_bswap64(_x) #endif -#undef BSWAP_FROM_BYTESWAP #undef BSWAP_FROM_FALLBACKS static inline void bswap16s(uint16_t *s) -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Remove the Haiku specific ifdef'ry. This reverts commit 652a46ebba970017c7a23767dcc983265cdb8eb7 ("bswap.h: Include <endian.h> on Haiku for bswap operations"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-5-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- include/qemu/bswap.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ # include <machine/bswap.h> #elif defined(__FreeBSD__) # include <sys/endian.h> -#elif defined(__HAIKU__) -# include <endian.h> # else #define BSWAP_FROM_FALLBACKS #endif /* ! CONFIG_MACHINE_BSWAP_H */ -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Remove the FreeBSD specific ifdef'ry. This reverts commit de03c3164accc21311c39327601fcdd95da301f3 ("bswap: Fix build on FreeBSD 10.0"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-6-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- include/qemu/bswap.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ #ifdef CONFIG_MACHINE_BSWAP_H # include <sys/endian.h> # include <machine/bswap.h> -#elif defined(__FreeBSD__) -# include <sys/endian.h> # else #define BSWAP_FROM_FALLBACKS #endif /* ! CONFIG_MACHINE_BSWAP_H */ -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit efc6c070aca ("configure: Add a test for the minimum compiler version") the minimum compiler version required for GCC is 4.8, which supports __builtin_bswap(). Remove the NetBSD specific ifdef'ry. This reverts commit 1360677cfe3ca8f945fa1de77823df21a77e4500 ("makes NetBSD use the native bswap functions"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230111163147.71761-7-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- meson.build | 4 ---- include/qemu/bswap.h | 11 ----------- 2 files changed, 15 deletions(-) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('CONFIG_INOTIFY', cc.has_header_symbol('sys/inotify.h', 'inotify_init')) config_host_data.set('CONFIG_INOTIFY1', cc.has_header_symbol('sys/inotify.h', 'inotify_init1')) -config_host_data.set('CONFIG_MACHINE_BSWAP_H', - cc.has_header_symbol('machine/bswap.h', 'bswap32', - prefix: '''#include <sys/endian.h> - #include <sys/types.h>''')) config_host_data.set('CONFIG_PRCTL_PR_SET_TIMERSLACK', cc.has_header_symbol('sys/prctl.h', 'PR_SET_TIMERSLACK')) config_host_data.set('CONFIG_RTNETLINK', diff --git a/include/qemu/bswap.h b/include/qemu/bswap.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/bswap.h +++ b/include/qemu/bswap.h @@ -XXX,XX +XXX,XX @@ #ifndef BSWAP_H #define BSWAP_H -#ifdef CONFIG_MACHINE_BSWAP_H -# include <sys/endian.h> -# include <machine/bswap.h> -# else -#define BSWAP_FROM_FALLBACKS -#endif /* ! CONFIG_MACHINE_BSWAP_H */ - #ifdef __cplusplus extern "C" { #endif -#ifdef BSWAP_FROM_FALLBACKS #undef bswap16 #define bswap16(_x) __builtin_bswap16(_x) #undef bswap32 #define bswap32(_x) __builtin_bswap32(_x) #undef bswap64 #define bswap64(_x) __builtin_bswap64(_x) -#endif - -#undef BSWAP_FROM_FALLBACKS static inline void bswap16s(uint16_t *s) { -- 2.31.1 From: Wenchao Wang <wenchao.wang@intel.com> Abort the maintenance of Guest CPU Cores (HAXM). * Clean up the maintainer list of X86 HAXM CPUs * Remove the web page URL and the mailing list * Change the status to Orphan Reviewed-by: Hang Yuan <hang.yuan@intel.com> Signed-off-by: Wenchao Wang <wenchao.wang@intel.com> Message-Id: <DM6PR11MB40903B55C23D5140E5BEF17687C49@DM6PR11MB4090.namprd11.prod.outlook.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- MAINTAINERS | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: stubs/xen-hw-stub.c Guest CPU Cores (HAXM) --------------------- X86 HAXM CPUs -M: Wenchao Wang <wenchao.wang@intel.com> -L: haxm-team@intel.com -W: https://github.com/intel/haxm/issues -S: Maintained +S: Orphan F: accel/stubs/hax-stub.c F: include/sysemu/hax.h F: target/i386/hax/ -- 2.31.1 The HAXM project has been retired (see https://github.com/intel/haxm#status), so we should mark the code in QEMU as deprecated (and finally remove it unless somebody else picks the project up again - which is quite unlikely since there are now whpx and hvf on these operating systems, too). Message-Id: <20230126121034.1035138-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- docs/about/deprecated.rst | 6 ++++++ target/i386/hax/hax-all.c | 3 +++ 2 files changed, 9 insertions(+) diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -XXX,XX +XXX,XX @@ form is preferred. The HPET setting has been turned into a machine property. Use ``-machine hpet=off`` instead. +``-accel hax`` (since 8.0) +'''''''''''''''''''''''''' + +The HAXM project has been retired (see https://github.com/intel/haxm#status). +Use "whpx" (on Windows) or "hvf" (on macOS) instead. + QEMU Machine Protocol (QMP) commands ------------------------------------ diff --git a/target/i386/hax/hax-all.c b/target/i386/hax/hax-all.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/hax/hax-all.c +++ b/target/i386/hax/hax-all.c @@ -XXX,XX +XXX,XX @@ static int hax_accel_init(MachineState *ms) fprintf(stdout, "HAX is %s and emulator runs in %s mode.\n", !ret ? "working" : "not working", !ret ? "fast virt" : "emulation"); + fprintf(stdout, + "NOTE: HAX is deprecated and will be removed in a future release.\n" + " Use 'whpx' (on Windows) or 'hvf' (on macOS) instead.\n"); } return ret; } -- 2.31.1 From: Fabiano Rosas <farosas@suse.de> The tests under tests/tcg depend on the TCG accelerator. Do not build them if --disable-tcg was given in the configure line. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230120184825.31626-7-farosas@suse.de> Signed-off-by: Thomas Huth <thuth@redhat.com> --- configure | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ for target in $target_list; do tcg_tests_targets="$tcg_tests_targets $target" fi done -echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> config-host.mak) + +if test "$tcg" = "enabled"; then + echo "TCG_TESTS_TARGETS=$tcg_tests_targets" >> config-host.mak +fi +) if test "$skip_meson" = no; then cross="config-meson.cross.new" -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> While this test is skipped on Windows, we still get when building: tests/qtest/vnc-display-test.c:22:20: warning: unused function 'on_vnc_error' [-Wunused-function] static inline void on_vnc_error(VncConnection* self, ^ tests/qtest/vnc-display-test.c:28:20: warning: unused function 'on_vnc_auth_failure' [-Wunused-function] static inline void on_vnc_auth_failure(VncConnection *self, ^ 2 warnings generated. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230119120514.28778-2-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/vnc-display-test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tests/qtest/vnc-display-test.c b/tests/qtest/vnc-display-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/vnc-display-test.c +++ b/tests/qtest/vnc-display-test.c @@ -XXX,XX +XXX,XX @@ typedef struct Test { GMainLoop *loop; } Test; +#if !defined(WIN32) + static void on_vnc_error(VncConnection* self, const char* msg) { @@ -XXX,XX +XXX,XX @@ static void on_vnc_auth_failure(VncConnection *self, g_error("vnc-auth-failure: %s", msg); } +#endif + static bool test_setup(Test *test) { -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> If we don't specify any machine, an architecture default might be picked. But some architectures don't provide any default, such ARM: $ make check-qtest-aarch64 ... 19/20 qemu:qtest+qtest-aarch64 / qtest-aarch64/vnc-display-test qemu-system-aarch64: No machine specified, and there is no default Since we don't need any particular machine to run this VNC test, use the 'none' machine. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230119120514.28778-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/vnc-display-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/vnc-display-test.c b/tests/qtest/vnc-display-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/vnc-display-test.c +++ b/tests/qtest/vnc-display-test.c @@ -XXX,XX +XXX,XX @@ test_setup(Test *test) #else int pair[2]; - test->qts = qtest_init("-vnc none -name vnc-test"); + test->qts = qtest_init("-M none -vnc none -name vnc-test"); g_assert_cmpint(qemu_socketpair(AF_UNIX, SOCK_STREAM, 0, pair), ==, 0); -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This test is failing in gtk-vnc on Darwin: $ make check-qtest-aarch64 ... 19/20 qemu:qtest+qtest-aarch64 / qtest-aarch64/vnc-display-test ERROR **: 10:42:35.488: vnc-error: Unsupported auth type 17973672 While QEMU picks the sigaltstack coroutine backend, gtk-vnc uses the ucontext coroutine backend, which might be broken on Darwin. Disable this test (current problem being investigated in this thread: https://lore.kernel.org/qemu-devel/Y8kw6X6keB5l53nl@redhat.com/). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230119120514.28778-4-philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/vnc-display-test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tests/qtest/vnc-display-test.c b/tests/qtest/vnc-display-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/vnc-display-test.c +++ b/tests/qtest/vnc-display-test.c @@ -XXX,XX +XXX,XX @@ typedef struct Test { GMainLoop *loop; } Test; -#if !defined(WIN32) +#if !defined(WIN32) && !defined(CONFIG_DARWIN) static void on_vnc_error(VncConnection* self, const char* msg) @@ -XXX,XX +XXX,XX @@ test_setup(Test *test) #ifdef WIN32 g_test_skip("Not supported on Windows yet"); return false; +#elif defined(CONFIG_DARWIN) + g_test_skip("Broken on Darwin"); + return false; #else int pair[2]; -- 2.31.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230120082341.59913-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/boot-serial-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/boot-serial-test.c +++ b/tests/qtest/boot-serial-test.c @@ -XXX,XX +XXX,XX @@ typedef struct testdef { const uint8_t *bios; /* Set in case we use our own mini bios */ } testdef_t; -static testdef_t tests[] = { +static const testdef_t tests[] = { { "alpha", "clipper", "", "PCI:" }, { "avr", "arduino-duemilanove", "", "T", sizeof(bios_avr), NULL, bios_avr }, { "avr", "arduino-mega-2560-v3", "", "T", sizeof(bios_avr), NULL, bios_avr}, -- 2.31.1 From: Sebastian Mitterle <smitterl@redhat.com> Add some documentation about the zpci device and how to use it with pci devices on s390x. Used source: Cornelia Huck's blog post https://people.redhat.com/~cohuck/2018/02/19/notes-on-pci-on-s390x.html Signed-off-by: Sebastian Mitterle <smitterl@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20230127123349.55294-1-smitterl@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- docs/system/s390x/pcidevices.rst | 41 ++++++++++++++++++++++++++++++++ docs/system/target-s390x.rst | 1 + 2 files changed, 42 insertions(+) create mode 100644 docs/system/s390x/pcidevices.rst diff --git a/docs/system/s390x/pcidevices.rst b/docs/system/s390x/pcidevices.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/system/s390x/pcidevices.rst @@ -XXX,XX +XXX,XX @@ +PCI devices on s390x +==================== + +PCI devices on s390x work differently than on other architectures and need to +be configured in a slightly different way. + +Every PCI device is linked with an additional ``zpci`` device. +While the ``zpci`` device will be autogenerated if not specified, it is +recommended to specify it explicitly so that you can pass s390-specific +PCI configuration. + +For example, in order to pass a PCI device ``0000:00:00.0`` through to the +guest, you would specify:: + + qemu-system-s390x ... \ + -device zpci,uid=1,fid=0,target=hostdev0,id=zpci1 \ + -device vfio-pci,host=0000:00:00.0,id=hostdev0 + +Here, the zpci device is joined with the PCI device via the ``target`` property. + +Note that we don't set bus, slot or function here for the guest as is common in +other PCI implementations. Topology information is not available on s390x, and +the guest will not see any of the bus, slot or function information specified +on the command line. + +Instead, ``uid`` and ``fid`` determine how the device is presented to the guest +operating system. + +In case of Linux, ``uid`` will be used in the ``domain`` part of the PCI +identifier, and ``fid`` identifies the physical slot, i.e.:: + + qemu-system-s390x ... \ + -device zpci,uid=7,fid=8,target=hostdev0,id=zpci1 \ + ... + +will be presented in the guest as:: + + # lspci -v + 0007:00:00.0 ... + Physical Slot: 00000008 + ... diff --git a/docs/system/target-s390x.rst b/docs/system/target-s390x.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/target-s390x.rst +++ b/docs/system/target-s390x.rst @@ -XXX,XX +XXX,XX @@ or vfio-ap is also available. s390x/css s390x/3270 s390x/vfio-ccw + s390x/pcidevices Architectural features ====================== -- 2.31.1 From: Daniel P. Berrangé <berrange@redhat.com> Way back in QEMU 4.0, the -audiodev command line option was introduced for configuring audio backends. This CLI option does not use QemuOpts so it is not visible for introspection in 'query-command-line-options', instead using the QAPI Audiodev type. Unfortunately there is also no QMP command that uses the Audiodev type, so it is not introspectable with 'query-qmp-schema' either. This introduces a 'query-audiodev' command that simply reflects back the list of configured -audiodev command line options. This alone is maybe not very useful by itself, but it makes Audiodev introspectable via 'query-qmp-schema', so that libvirt (and other upper layer tools) can discover the available audiodevs. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Update for upcoming QEMU v8.0, and use QAPI_LIST_PREPEND] Message-Id: <20230123083957.20349-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- qapi/audio.json | 13 +++++++++++++ audio/audio.c | 12 ++++++++++++ 2 files changed, 25 insertions(+) diff --git a/qapi/audio.json b/qapi/audio.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/audio.json +++ b/qapi/audio.json @@ -XXX,XX +XXX,XX @@ 'sndio': 'AudiodevSndioOptions', 'spice': 'AudiodevGenericOptions', 'wav': 'AudiodevWavOptions' } } + +## +# @query-audiodevs: +# +# Returns information about audiodev configuration +# +# Returns: array of @Audiodev +# +# Since: 8.0 +# +## +{ 'command': 'query-audiodevs', + 'returns': ['Audiodev'] } diff --git a/audio/audio.c b/audio/audio.c index XXXXXXX..XXXXXXX 100644 --- a/audio/audio.c +++ b/audio/audio.c @@ -XXX,XX +XXX,XX @@ #include "monitor/monitor.h" #include "qemu/timer.h" #include "qapi/error.h" +#include "qapi/clone-visitor.h" #include "qapi/qobject-input-visitor.h" #include "qapi/qapi-visit-audio.h" +#include "qapi/qapi-commands-audio.h" #include "qemu/cutils.h" #include "qemu/module.h" #include "qemu/help_option.h" @@ -XXX,XX +XXX,XX @@ size_t audio_rate_get_bytes(RateCtl *rate, struct audio_pcm_info *info, return bytes; } + +AudiodevList *qmp_query_audiodevs(Error **errp) +{ + AudiodevList *ret = NULL; + AudiodevListEntry *e; + QSIMPLEQ_FOREACH(e, &audiodevs, next) { + QAPI_LIST_PREPEND(ret, QAPI_CLONE(Audiodev, e->dev)); + } + return ret; +} -- 2.31.1 From: Daniel P. Berrangé <berrange@redhat.com> Currently the -audiodev accepts any audiodev type regardless of what is built in to QEMU. An error only occurs later at runtime when a sound device tries to use the audio backend. With this change QEMU will immediately reject -audiodev args that are not compiled into the binary. The QMP schema will also be introspectable to identify what is compiled in. This also helps to avoid compiling code that is not required in the binary. Note: When building the audiodevs as modules, the patch only compiles out code for modules that we don't build at all. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> [thuth: Rebase, take sndio and dbus devices into account] Message-Id: <20230123083957.20349-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- qapi/audio.json | 44 ++++++++++++++++++++++++++++++------------ audio/audio_template.h | 20 +++++++++++++++++++ audio/audio.c | 20 +++++++++++++++++++ audio/audio_legacy.c | 41 ++++++++++++++++++++++++++++++++++++++- 4 files changed, 112 insertions(+), 13 deletions(-) diff --git a/qapi/audio.json b/qapi/audio.json index XXXXXXX..XXXXXXX 100644 --- a/qapi/audio.json +++ b/qapi/audio.json @@ -XXX,XX +XXX,XX @@ # Since: 4.0 ## { 'enum': 'AudiodevDriver', - 'data': [ 'none', 'alsa', 'coreaudio', 'dbus', 'dsound', 'jack', 'oss', 'pa', - 'sdl', 'sndio', 'spice', 'wav' ] } + 'data': [ 'none', + { 'name': 'alsa', 'if': 'CONFIG_AUDIO_ALSA' }, + { 'name': 'coreaudio', 'if': 'CONFIG_AUDIO_COREAUDIO' }, + { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' }, + { 'name': 'dsound', 'if': 'CONFIG_AUDIO_DSOUND' }, + { 'name': 'jack', 'if': 'CONFIG_AUDIO_JACK' }, + { 'name': 'oss', 'if': 'CONFIG_AUDIO_OSS' }, + { 'name': 'pa', 'if': 'CONFIG_AUDIO_PA' }, + { 'name': 'sdl', 'if': 'CONFIG_AUDIO_SDL' }, + { 'name': 'sndio', 'if': 'CONFIG_AUDIO_SNDIO' }, + { 'name': 'spice', 'if': 'CONFIG_SPICE' }, + 'wav' ] } ## # @Audiodev: @@ -XXX,XX +XXX,XX @@ 'discriminator': 'driver', 'data': { 'none': 'AudiodevGenericOptions', - 'alsa': 'AudiodevAlsaOptions', - 'coreaudio': 'AudiodevCoreaudioOptions', - 'dbus': 'AudiodevGenericOptions', - 'dsound': 'AudiodevDsoundOptions', - 'jack': 'AudiodevJackOptions', - 'oss': 'AudiodevOssOptions', - 'pa': 'AudiodevPaOptions', - 'sdl': 'AudiodevSdlOptions', - 'sndio': 'AudiodevSndioOptions', - 'spice': 'AudiodevGenericOptions', + 'alsa': { 'type': 'AudiodevAlsaOptions', + 'if': 'CONFIG_AUDIO_ALSA' }, + 'coreaudio': { 'type': 'AudiodevCoreaudioOptions', + 'if': 'CONFIG_AUDIO_COREAUDIO' }, + 'dbus': { 'type': 'AudiodevGenericOptions', + 'if': 'CONFIG_DBUS_DISPLAY' }, + 'dsound': { 'type': 'AudiodevDsoundOptions', + 'if': 'CONFIG_AUDIO_DSOUND' }, + 'jack': { 'type': 'AudiodevJackOptions', + 'if': 'CONFIG_AUDIO_JACK' }, + 'oss': { 'type': 'AudiodevOssOptions', + 'if': 'CONFIG_AUDIO_OSS' }, + 'pa': { 'type': 'AudiodevPaOptions', + 'if': 'CONFIG_AUDIO_PA' }, + 'sdl': { 'type': 'AudiodevSdlOptions', + 'if': 'CONFIG_AUDIO_SDL' }, + 'sndio': { 'type': 'AudiodevSndioOptions', + 'if': 'CONFIG_AUDIO_SNDIO' }, + 'spice': { 'type': 'AudiodevGenericOptions', + 'if': 'CONFIG_SPICE' }, 'wav': 'AudiodevWavOptions' } } ## diff --git a/audio/audio_template.h b/audio/audio_template.h index XXXXXXX..XXXXXXX 100644 --- a/audio/audio_template.h +++ b/audio/audio_template.h @@ -XXX,XX +XXX,XX @@ AudiodevPerDirectionOptions *glue(audio_get_pdo_, TYPE)(Audiodev *dev) switch (dev->driver) { case AUDIODEV_DRIVER_NONE: return dev->u.none.TYPE; +#ifdef CONFIG_AUDIO_ALSA case AUDIODEV_DRIVER_ALSA: return qapi_AudiodevAlsaPerDirectionOptions_base(dev->u.alsa.TYPE); +#endif +#ifdef CONFIG_AUDIO_COREAUDIO case AUDIODEV_DRIVER_COREAUDIO: return qapi_AudiodevCoreaudioPerDirectionOptions_base( dev->u.coreaudio.TYPE); +#endif +#ifdef CONFIG_DBUS_DISPLAY case AUDIODEV_DRIVER_DBUS: return dev->u.dbus.TYPE; +#endif +#ifdef CONFIG_AUDIO_DSOUND case AUDIODEV_DRIVER_DSOUND: return dev->u.dsound.TYPE; +#endif +#ifdef CONFIG_AUDIO_JACK case AUDIODEV_DRIVER_JACK: return qapi_AudiodevJackPerDirectionOptions_base(dev->u.jack.TYPE); +#endif +#ifdef CONFIG_AUDIO_OSS case AUDIODEV_DRIVER_OSS: return qapi_AudiodevOssPerDirectionOptions_base(dev->u.oss.TYPE); +#endif +#ifdef CONFIG_AUDIO_PA case AUDIODEV_DRIVER_PA: return qapi_AudiodevPaPerDirectionOptions_base(dev->u.pa.TYPE); +#endif +#ifdef CONFIG_AUDIO_SDL case AUDIODEV_DRIVER_SDL: return qapi_AudiodevSdlPerDirectionOptions_base(dev->u.sdl.TYPE); +#endif +#ifdef CONFIG_AUDIO_SNDIO case AUDIODEV_DRIVER_SNDIO: return dev->u.sndio.TYPE; +#endif +#ifdef CONFIG_SPICE case AUDIODEV_DRIVER_SPICE: return dev->u.spice.TYPE; +#endif case AUDIODEV_DRIVER_WAV: return dev->u.wav.TYPE; diff --git a/audio/audio.c b/audio/audio.c index XXXXXXX..XXXXXXX 100644 --- a/audio/audio.c +++ b/audio/audio.c @@ -XXX,XX +XXX,XX @@ void audio_create_pdos(Audiodev *dev) break CASE(NONE, none, ); +#ifdef CONFIG_AUDIO_ALSA CASE(ALSA, alsa, Alsa); +#endif +#ifdef CONFIG_AUDIO_COREAUDIO CASE(COREAUDIO, coreaudio, Coreaudio); +#endif +#ifdef CONFIG_DBUS_DISPLAY CASE(DBUS, dbus, ); +#endif +#ifdef CONFIG_AUDIO_DSOUND CASE(DSOUND, dsound, ); +#endif +#ifdef CONFIG_AUDIO_JACK CASE(JACK, jack, Jack); +#endif +#ifdef CONFIG_AUDIO_OSS CASE(OSS, oss, Oss); +#endif +#ifdef CONFIG_AUDIO_PA CASE(PA, pa, Pa); +#endif +#ifdef CONFIG_AUDIO_SDL CASE(SDL, sdl, Sdl); +#endif +#ifdef CONFIG_AUDIO_SNDIO CASE(SNDIO, sndio, ); +#endif +#ifdef CONFIG_SPICE CASE(SPICE, spice, ); +#endif CASE(WAV, wav, ); case AUDIODEV_DRIVER__MAX: diff --git a/audio/audio_legacy.c b/audio/audio_legacy.c index XXXXXXX..XXXXXXX 100644 --- a/audio/audio_legacy.c +++ b/audio/audio_legacy.c @@ -XXX,XX +XXX,XX @@ static void get_fmt(const char *env, AudioFormat *dst, bool *has_dst) } +#if defined(CONFIG_AUDIO_ALSA) || defined(CONFIG_AUDIO_DSOUND) static void get_millis_to_usecs(const char *env, uint32_t *dst, bool *has_dst) { const char *val = getenv(env); @@ -XXX,XX +XXX,XX @@ static void get_millis_to_usecs(const char *env, uint32_t *dst, bool *has_dst) *has_dst = true; } } +#endif +#if defined(CONFIG_AUDIO_ALSA) || defined(CONFIG_AUDIO_COREAUDIO) || \ + defined(CONFIG_AUDIO_PA) || defined(CONFIG_AUDIO_SDL) || \ + defined(CONFIG_AUDIO_DSOUND) || defined(CONFIG_AUDIO_OSS) static uint32_t frames_to_usecs(uint32_t frames, AudiodevPerDirectionOptions *pdo) { uint32_t freq = pdo->has_frequency ? pdo->frequency : 44100; return (frames * 1000000 + freq / 2) / freq; } +#endif - +#ifdef CONFIG_AUDIO_COREAUDIO static void get_frames_to_usecs(const char *env, uint32_t *dst, bool *has_dst, AudiodevPerDirectionOptions *pdo) { @@ -XXX,XX +XXX,XX @@ static void get_frames_to_usecs(const char *env, uint32_t *dst, bool *has_dst, *has_dst = true; } } +#endif +#if defined(CONFIG_AUDIO_PA) || defined(CONFIG_AUDIO_SDL) || \ + defined(CONFIG_AUDIO_DSOUND) || defined(CONFIG_AUDIO_OSS) static uint32_t samples_to_usecs(uint32_t samples, AudiodevPerDirectionOptions *pdo) { uint32_t channels = pdo->has_channels ? pdo->channels : 2; return frames_to_usecs(samples / channels, pdo); } +#endif +#if defined(CONFIG_AUDIO_PA) || defined(CONFIG_AUDIO_SDL) static void get_samples_to_usecs(const char *env, uint32_t *dst, bool *has_dst, AudiodevPerDirectionOptions *pdo) { @@ -XXX,XX +XXX,XX @@ static void get_samples_to_usecs(const char *env, uint32_t *dst, bool *has_dst, *has_dst = true; } } +#endif +#if defined(CONFIG_AUDIO_DSOUND) || defined(CONFIG_AUDIO_OSS) static uint32_t bytes_to_usecs(uint32_t bytes, AudiodevPerDirectionOptions *pdo) { AudioFormat fmt = pdo->has_format ? pdo->format : AUDIO_FORMAT_S16; @@ -XXX,XX +XXX,XX @@ static void get_bytes_to_usecs(const char *env, uint32_t *dst, bool *has_dst, *has_dst = true; } } +#endif /* backend specific functions */ + +#ifdef CONFIG_AUDIO_ALSA /* ALSA */ static void handle_alsa_per_direction( AudiodevAlsaPerDirectionOptions *apdo, const char *prefix) @@ -XXX,XX +XXX,XX @@ static void handle_alsa(Audiodev *dev) get_millis_to_usecs("QEMU_ALSA_THRESHOLD", &aopt->threshold, &aopt->has_threshold); } +#endif +#ifdef CONFIG_AUDIO_COREAUDIO /* coreaudio */ static void handle_coreaudio(Audiodev *dev) { @@ -XXX,XX +XXX,XX @@ static void handle_coreaudio(Audiodev *dev) &dev->u.coreaudio.out->buffer_count, &dev->u.coreaudio.out->has_buffer_count); } +#endif +#ifdef CONFIG_AUDIO_DSOUND /* dsound */ static void handle_dsound(Audiodev *dev) { @@ -XXX,XX +XXX,XX @@ static void handle_dsound(Audiodev *dev) &dev->u.dsound.in->has_buffer_length, dev->u.dsound.in); } +#endif +#ifdef CONFIG_AUDIO_OSS /* OSS */ static void handle_oss_per_direction( AudiodevOssPerDirectionOptions *opdo, const char *try_poll_env, @@ -XXX,XX +XXX,XX @@ static void handle_oss(Audiodev *dev) get_bool("QEMU_OSS_EXCLUSIVE", &oopt->exclusive, &oopt->has_exclusive); get_int("QEMU_OSS_POLICY", &oopt->dsp_policy, &oopt->has_dsp_policy); } +#endif +#ifdef CONFIG_AUDIO_PA /* pulseaudio */ static void handle_pa_per_direction( AudiodevPaPerDirectionOptions *ppdo, const char *env) @@ -XXX,XX +XXX,XX @@ static void handle_pa(Audiodev *dev) get_str("QEMU_PA_SERVER", &dev->u.pa.server); } +#endif +#ifdef CONFIG_AUDIO_SDL /* SDL */ static void handle_sdl(Audiodev *dev) { @@ -XXX,XX +XXX,XX @@ static void handle_sdl(Audiodev *dev) &dev->u.sdl.out->has_buffer_length, qapi_AudiodevSdlPerDirectionOptions_base(dev->u.sdl.out)); } +#endif /* wav */ static void handle_wav(Audiodev *dev) @@ -XXX,XX +XXX,XX @@ static AudiodevListEntry *legacy_opt(const char *drvname) } switch (e->dev->driver) { +#ifdef CONFIG_AUDIO_ALSA case AUDIODEV_DRIVER_ALSA: handle_alsa(e->dev); break; +#endif +#ifdef CONFIG_AUDIO_COREAUDIO case AUDIODEV_DRIVER_COREAUDIO: handle_coreaudio(e->dev); break; +#endif +#ifdef CONFIG_AUDIO_DSOUND case AUDIODEV_DRIVER_DSOUND: handle_dsound(e->dev); break; +#endif +#ifdef CONFIG_AUDIO_OSS case AUDIODEV_DRIVER_OSS: handle_oss(e->dev); break; +#endif +#ifdef CONFIG_AUDIO_PA case AUDIODEV_DRIVER_PA: handle_pa(e->dev); break; +#endif +#ifdef CONFIG_AUDIO_SDL case AUDIODEV_DRIVER_SDL: handle_sdl(e->dev); break; +#endif case AUDIODEV_DRIVER_WAV: handle_wav(e->dev); -- 2.31.1 We are also compile-testing ppc64-softmmu with clang in the "tsan-build" job, and ppc64-softmmu covers pretty much the same code as ppc-softmmu, so we should not lose much test coverage here by removing ppc-softmmu from the "clang-system" job. Message-Id: <20230130104446.1286773-2-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- .gitlab-ci.d/buildtest.yml | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml index XXXXXXX..XXXXXXX 100644 --- a/.gitlab-ci.d/buildtest.yml +++ b/.gitlab-ci.d/buildtest.yml @@ -XXX,XX +XXX,XX @@ clang-system: IMAGE: fedora CONFIGURE_ARGS: --cc=clang --cxx=clang++ --extra-cflags=-fsanitize=undefined --extra-cflags=-fno-sanitize-recover=undefined - TARGETS: alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu - ppc-softmmu s390x-softmmu + TARGETS: alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu s390x-softmmu MAKE_CHECK_ARGS: check-qtest check-tcg clang-user: -- 2.31.1 display-vga-test currently tries to guess the usable VGA devices according to the target architecture that is used for the test. This of course does not work if QEMU has been built with the "--without-default-devices" configure switch. To fix this, use the qtest_has_device() function for the decision instead. This way we can also consolidate most of the test functions into one single function (that takes a parameter with the device name now), except for the multihead test that tries to instantiate two devices and thus is a little bit different. Message-Id: <20230130104446.1286773-4-thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/display-vga-test.c | 65 +++++++++++++--------------------- 1 file changed, 25 insertions(+), 40 deletions(-) diff --git a/tests/qtest/display-vga-test.c b/tests/qtest/display-vga-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/display-vga-test.c +++ b/tests/qtest/display-vga-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "libqtest-single.h" - -static void pci_cirrus(void) -{ - qtest_start("-vga none -device cirrus-vga"); - qtest_end(); -} - -static void pci_stdvga(void) -{ - qtest_start("-vga none -device VGA"); - qtest_end(); -} - -static void pci_secondary(void) -{ - qtest_start("-vga none -device secondary-vga"); - qtest_end(); -} +#include "libqtest.h" static void pci_multihead(void) { - qtest_start("-vga none -device VGA -device secondary-vga"); - qtest_end(); -} + QTestState *qts; -static void pci_virtio_gpu(void) -{ - qtest_start("-vga none -device virtio-gpu-pci"); - qtest_end(); + qts = qtest_init("-vga none -device VGA -device secondary-vga"); + qtest_quit(qts); } -static void pci_virtio_vga(void) +static void test_vga(gconstpointer data) { - qtest_start("-vga none -device virtio-vga"); - qtest_end(); + QTestState *qts; + + qts = qtest_initf("-vga none -device %s", (const char *)data); + qtest_quit(qts); } int main(int argc, char **argv) { - const char *arch = qtest_get_arch(); + static const char *devices[] = { + "cirrus-vga", + "VGA", + "secondary-vga", + "virtio-gpu-pci", + "virtio-vga" + }; g_test_init(&argc, &argv, NULL); - if (strcmp(arch, "alpha") == 0 || strcmp(arch, "i386") == 0 || - strcmp(arch, "mips") == 0 || strcmp(arch, "x86_64") == 0) { - qtest_add_func("/display/pci/cirrus", pci_cirrus); + for (int i = 0; i < ARRAY_SIZE(devices); i++) { + if (qtest_has_device(devices[i])) { + char *testpath = g_strdup_printf("/display/pci/%s", devices[i]); + qtest_add_data_func(testpath, devices[i], test_vga); + g_free(testpath); + } } - qtest_add_func("/display/pci/stdvga", pci_stdvga); - qtest_add_func("/display/pci/secondary", pci_secondary); - qtest_add_func("/display/pci/multihead", pci_multihead); - qtest_add_func("/display/pci/virtio-gpu", pci_virtio_gpu); - if (g_str_equal(arch, "i386") || g_str_equal(arch, "x86_64") || - g_str_equal(arch, "hppa") || g_str_equal(arch, "ppc64")) { - qtest_add_func("/display/pci/virtio-vga", pci_virtio_vga); + + if (qtest_has_device("secondary-vga")) { + qtest_add_func("/display/pci/multihead", pci_multihead); } return g_test_run(); -- 2.31.1 Let's safe some CI minutes by merging these two jobs. We can now also drop "--disable-capstone" since the capstone submodule has been removed a while ago. We should rather test --disable-fdt now to check a compilation without the "dtc" submodule (for this we have to drop i386-softmmu from the target list unfortunately). Additionally, the qtests with s390x and sh4 are not read for "--without-default-devices" yet, so we can only test mips64 and avr here now. Message-Id: <20230130104446.1286773-5-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- .gitlab-ci.d/buildtest.yml | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/.gitlab-ci.d/buildtest.yml b/.gitlab-ci.d/buildtest.yml index XXXXXXX..XXXXXXX 100644 --- a/.gitlab-ci.d/buildtest.yml +++ b/.gitlab-ci.d/buildtest.yml @@ -XXX,XX +XXX,XX @@ build-coroutine-sigaltstack: MAKE_CHECK_ARGS: check-unit # Check our reduced build configurations -build-without-default-devices: +build-without-defaults: extends: .native_build_job_template needs: job: amd64-centos8-container variables: IMAGE: centos8 - CONFIGURE_ARGS: --without-default-devices --disable-user - -build-without-default-features: - extends: .native_build_job_template - needs: - job: amd64-fedora-container - variables: - IMAGE: fedora CONFIGURE_ARGS: + --without-default-devices --without-default-features - --disable-capstone + --disable-fdt --disable-pie --disable-qom-cast-debug --disable-strip - TARGETS: avr-softmmu i386-softmmu mips64-softmmu s390x-softmmu sh4-softmmu + TARGETS: avr-softmmu mips64-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu hexagon-linux-user i386-linux-user s390x-linux-user - MAKE_CHECK_ARGS: check-unit check-qtest SPEED=slow + MAKE_CHECK_ARGS: check-unit check-qtest-avr check-qtest-mips64 build-libvhost-user: extends: .base_job_template -- 2.31.1 Hi Stefan! The following changes since commit b55e4b9c0525560577384adfc6d30eb0daa8d7be: Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging (2023-09-21 09:32:47 -0400) are available in the Git repository at: https://gitlab.com/thuth/qemu.git tags/pull-request-2023-09-25 for you to fetch changes up to b821109583a035a17fa5b89c0ebd8917d09cc82d: tests/avocado: fix waiting for vm shutdown in replay_linux (2023-09-25 08:02:23 +0200) ---------------------------------------------------------------- * Make keyutils independent from keyring in meson.build * Simplify the NIC init code of the jazz machine a little bit * Minor qtest and avocado fixes ---------------------------------------------------------------- Pavel Dovgalyuk (1): tests/avocado: fix waiting for vm shutdown in replay_linux Philippe Mathieu-Daudé (1): tests/qtest/netdev-socket: Do not test multicast on Darwin Stefan Hajnoczi (1): tests/qtest/netdev-socket: Raise connection timeout to 120 seconds Thomas Huth (4): meson.build: Make keyutils independent from keyring tests/qtest/m48t59-test: Silence compiler warning with -Wshadow hw/mips/jazz: Move the NIC init code into a separate function hw/mips/jazz: Simplify the NIC setup code meson.build | 6 ++-- hw/mips/jazz.c | 81 +++++++++++++++++++++---------------------- tests/qtest/m48t59-test.c | 12 +++---- tests/qtest/netdev-socket.c | 8 +++-- meson_options.txt | 2 ++ scripts/meson-buildoptions.sh | 3 ++ tests/avocado/replay_linux.py | 2 +- 7 files changed, 60 insertions(+), 54 deletions(-) Commit 0db0fbb5cf ("Add conditional dependency for libkeyutils") tried to provide a possibility for the user to disable keyutils if not required by makeing it depend on the keyring feature. This looked reasonable at a first glance (the unit test in tests/unit/ needs both), but the condition in meson.build fails if the feature is meant to be detected automatically, and there is also another spot in backends/meson.build where keyutils is used independently from keyring. So let's remove the dependency on keyring again and introduce a proper meson build option instead. Cc: qemu-stable@nongnu.org Fixes: 0db0fbb5cf ("Add conditional dependency for libkeyutils") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1842 Message-ID: <20230824094208.255279-1-thuth@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- meson.build | 6 ++++-- meson_options.txt | 2 ++ scripts/meson-buildoptions.sh | 3 +++ 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ if gnutls.found() method: 'pkg-config') endif keyutils = not_found -if get_option('keyring').enabled() - keyutils = dependency('libkeyutils', required: false, method: 'pkg-config') +if not get_option('libkeyutils').auto() or have_block + keyutils = dependency('libkeyutils', required: get_option('libkeyutils'), + method: 'pkg-config') endif has_gettid = cc.has_function('gettid') @@ -XXX,XX +XXX,XX @@ endif summary_info += {'AF_ALG support': have_afalg} summary_info += {'rng-none': get_option('rng_none')} summary_info += {'Linux keyring': have_keyring} +summary_info += {'Linux keyutils': keyutils} summary(summary_info, bool_yn: true, section: 'Crypto') # UI diff --git a/meson_options.txt b/meson_options.txt index XXXXXXX..XXXXXXX 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -XXX,XX +XXX,XX @@ option('avx512bw', type: 'feature', value: 'auto', description: 'AVX512BW optimizations') option('keyring', type: 'feature', value: 'auto', description: 'Linux keyring support') +option('libkeyutils', type: 'feature', value: 'auto', + description: 'Linux keyutils support') option('af_xdp', type : 'feature', value : 'auto', description: 'AF_XDP network backend support') diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh index XXXXXXX..XXXXXXX 100644 --- a/scripts/meson-buildoptions.sh +++ b/scripts/meson-buildoptions.sh @@ -XXX,XX +XXX,XX @@ meson_options_help() { printf "%s\n" ' libdaxctl libdaxctl support' printf "%s\n" ' libdw debuginfo support' printf "%s\n" ' libiscsi libiscsi userspace initiator' + printf "%s\n" ' libkeyutils Linux keyutils support' printf "%s\n" ' libnfs libnfs block device driver' printf "%s\n" ' libpmem libpmem support' printf "%s\n" ' libssh ssh block device support' @@ -XXX,XX +XXX,XX @@ _meson_option_parse() { --libexecdir=*) quote_sh "-Dlibexecdir=$2" ;; --enable-libiscsi) printf "%s" -Dlibiscsi=enabled ;; --disable-libiscsi) printf "%s" -Dlibiscsi=disabled ;; + --enable-libkeyutils) printf "%s" -Dlibkeyutils=enabled ;; + --disable-libkeyutils) printf "%s" -Dlibkeyutils=disabled ;; --enable-libnfs) printf "%s" -Dlibnfs=enabled ;; --disable-libnfs) printf "%s" -Dlibnfs=disabled ;; --enable-libpmem) printf "%s" -Dlibpmem=enabled ;; -- 2.41.0 From: Stefan Hajnoczi <stefanha@redhat.com> The test still fails intermittently with a 60 second timeout in the GitLab CI environment. Raise the timeout to 120 seconds. 576/839 ERROR:../tests/qtest/netdev-socket.c:293:test_stream_unix: assertion failed (resp == expect): ("st0: index=0,type=stream,connection error\r\n" == "st0: index=0,type=stream,unix:/tmp/netdev-socket.UW5IA2/stream_unix\r\n") ERROR 576/839 qemu:qtest+qtest-sh4 / qtest-sh4/netdev-socket ERROR 62.85s killed by signal 6 SIGABRT >>> MALLOC_PERTURB_=249 QTEST_QEMU_BINARY=./qemu-system-sh4 QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon G_TEST_DBUS_DAEMON=/home/gitlab-runner/builds/-LCfcJ2T/0/qemu-project/qemu/tests/dbus-vmstate-daemon.sh QTEST_QEMU_IMG=./qemu-img /home/gitlab-runner/builds/-LCfcJ2T/0/qemu-project/qemu/build/tests/qtest/netdev-socket --tap -k ――――――――――――――――――――――――――――――――――――― ✀ ――――――――――――――――――――――――――――――――――――― stderr: ** ERROR:../tests/qtest/netdev-socket.c:293:test_stream_unix: assertion failed (resp == expect): ("st0: index=0,type=stream,connection error\r\n" == "st0: index=0,type=stream,unix:/tmp/netdev-socket.UW5IA2/stream_unix\r\n") (test program exited with status code -6) Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1881 Fixes: 417296c8d858 ("tests/qtest/netdev-socket: Raise connection timeout to 60 seconds") Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Message-ID: <20230912133310.60583-1-stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/netdev-socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/netdev-socket.c b/tests/qtest/netdev-socket.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/netdev-socket.c +++ b/tests/qtest/netdev-socket.c @@ -XXX,XX +XXX,XX @@ #include "qapi/qobject-input-visitor.h" #include "qapi/qapi-visit-sockets.h" -#define CONNECTION_TIMEOUT 60 +#define CONNECTION_TIMEOUT 120 #define EXPECT_STATE(q, e, t) \ do { \ -- 2.41.0 When compiling this file with -Wshadow=local , we get: ../tests/qtest/m48t59-test.c: In function ‘bcd_check_time’: ../tests/qtest/m48t59-test.c:195:17: warning: declaration of ‘s’ shadows a previous local [-Wshadow=local] 195 | long t, s; | ^ ../tests/qtest/m48t59-test.c:158:17: note: shadowed declaration is here 158 | QTestState *s = m48t59_qtest_start(); | ^ Rename the QTestState variable to "qts" which is the common naming for such a variable in other tests. Reported-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20230922163742.149444-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/m48t59-test.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tests/qtest/m48t59-test.c b/tests/qtest/m48t59-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/m48t59-test.c +++ b/tests/qtest/m48t59-test.c @@ -XXX,XX +XXX,XX @@ static void bcd_check_time(void) struct tm *datep; time_t ts; const int wiggle = 2; - QTestState *s = m48t59_qtest_start(); + QTestState *qts = m48t59_qtest_start(); /* * This check assumes a few things. First, we cannot guarantee that we get @@ -XXX,XX +XXX,XX @@ static void bcd_check_time(void) ts = time(NULL); gmtime_r(&ts, &start); - cmos_get_date_time(s, &date[0]); - cmos_get_date_time(s, &date[1]); - cmos_get_date_time(s, &date[2]); - cmos_get_date_time(s, &date[3]); + cmos_get_date_time(qts, &date[0]); + cmos_get_date_time(qts, &date[1]); + cmos_get_date_time(qts, &date[2]); + cmos_get_date_time(qts, &date[3]); ts = time(NULL); gmtime_r(&ts, &end); @@ -XXX,XX +XXX,XX @@ static void bcd_check_time(void) g_assert_cmpint(ABS(t - s), <=, wiggle); } - qtest_quit(s); + qtest_quit(qts); } /* success if no crash or abort */ -- 2.41.0 From: Philippe Mathieu-Daudé <philmd@linaro.org> Do not run this test on Darwin, otherwise we get: qemu-system-arm: -netdev dgram,id=st0,remote.type=inet,remote.host=230.0.0.1,remote.port=1234: can't add socket to multicast group 230.0.0.1: Can't assign requested address Broken pipe ../../tests/qtest/libqtest.c:191: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0) Abort trap: 6 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230918062549.2363-1-philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/qtest/netdev-socket.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tests/qtest/netdev-socket.c b/tests/qtest/netdev-socket.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/netdev-socket.c +++ b/tests/qtest/netdev-socket.c @@ -XXX,XX +XXX,XX @@ static void test_dgram_inet(void) qtest_quit(qts0); } -#ifndef _WIN32 +#if !defined(_WIN32) && !defined(CONFIG_DARWIN) static void test_dgram_mcast(void) { QTestState *qts; @@ -XXX,XX +XXX,XX @@ static void test_dgram_mcast(void) qtest_quit(qts); } +#endif +#ifndef _WIN32 static void test_dgram_unix(void) { QTestState *qts0, *qts1; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) if (has_ipv4) { qtest_add_func("/netdev/stream/inet/ipv4", test_stream_inet_ipv4); qtest_add_func("/netdev/dgram/inet", test_dgram_inet); -#ifndef _WIN32 +#if !defined(_WIN32) && !defined(CONFIG_DARWIN) qtest_add_func("/netdev/dgram/mcast", test_dgram_mcast); #endif } -- 2.41.0 The mips_jazz_init() function is already quite big, so moving away some code here can help to make it more understandable. Additionally, by moving this code into a separate function, the next patch (that will refactor the for-loop around the NIC init code) will be much shorter and easier to understand. Message-ID: <20230913160922.355640-2-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- hw/mips/jazz.c | 62 ++++++++++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 27 deletions(-) diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/jazz.c +++ b/hw/mips/jazz.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps dma_dummy_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; +static void mips_jazz_init_net(NICInfo *nd, IOMMUMemoryRegion *rc4030_dma_mr, + DeviceState *rc4030, MemoryRegion *dp8393x_prom) +{ + DeviceState *dev; + SysBusDevice *sysbus; + int checksum, i; + uint8_t *prom; + + qemu_check_nic_model(nd, "dp83932"); + + dev = qdev_new("dp8393x"); + qdev_set_nic_properties(dev, nd); + qdev_prop_set_uint8(dev, "it_shift", 2); + qdev_prop_set_bit(dev, "big_endian", TARGET_BIG_ENDIAN); + object_property_set_link(OBJECT(dev), "dma_mr", + OBJECT(rc4030_dma_mr), &error_abort); + sysbus = SYS_BUS_DEVICE(dev); + sysbus_realize_and_unref(sysbus, &error_fatal); + sysbus_mmio_map(sysbus, 0, 0x80001000); + sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4)); + + /* Add MAC address with valid checksum to PROM */ + prom = memory_region_get_ram_ptr(dp8393x_prom); + checksum = 0; + for (i = 0; i < 6; i++) { + prom[i] = nd->macaddr.a[i]; + checksum += prom[i]; + if (checksum > 0xff) { + checksum = (checksum + 1) & 0xff; + } + } + prom[7] = 0xff - checksum; +} + #define MAGNUM_BIOS_SIZE_MAX 0x7e000 #define MAGNUM_BIOS_SIZE \ (BIOS_SIZE < MAGNUM_BIOS_SIZE_MAX ? BIOS_SIZE : MAGNUM_BIOS_SIZE_MAX) @@ -XXX,XX +XXX,XX @@ static void mips_jazz_init(MachineState *machine, nd->model = g_strdup("dp83932"); } if (strcmp(nd->model, "dp83932") == 0) { - int checksum, i; - uint8_t *prom; - - qemu_check_nic_model(nd, "dp83932"); - - dev = qdev_new("dp8393x"); - qdev_set_nic_properties(dev, nd); - qdev_prop_set_uint8(dev, "it_shift", 2); - qdev_prop_set_bit(dev, "big_endian", TARGET_BIG_ENDIAN); - object_property_set_link(OBJECT(dev), "dma_mr", - OBJECT(rc4030_dma_mr), &error_abort); - sysbus = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(sysbus, &error_fatal); - sysbus_mmio_map(sysbus, 0, 0x80001000); - sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4)); - - /* Add MAC address with valid checksum to PROM */ - prom = memory_region_get_ram_ptr(dp8393x_prom); - checksum = 0; - for (i = 0; i < 6; i++) { - prom[i] = nd->macaddr.a[i]; - checksum += prom[i]; - if (checksum > 0xff) { - checksum = (checksum + 1) & 0xff; - } - } - prom[7] = 0xff - checksum; + mips_jazz_init_net(nd, rc4030_dma_mr, rc4030, dp8393x_prom); break; } else if (is_help_option(nd->model)) { error_report("Supported NICs: dp83932"); -- 2.41.0 The for-loop does not make much sense here - it is always left after the first iteration, so we can also check for nb_nics == 1 instead which is way easier to understand. Also, the checks for nd->model are superfluous since the code in mips_jazz_init_net() calls qemu_check_nic_model() that already takes care of this (i.e. initializing nd->model if it has not been set yet, and checking whether it is the "help" option or the supported NIC model). Message-ID: <20230913160922.355640-3-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> --- hw/mips/jazz.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/mips/jazz.c +++ b/hw/mips/jazz.c @@ -XXX,XX +XXX,XX @@ static void mips_jazz_init(MachineState *machine, MemoryRegion *rtc = g_new(MemoryRegion, 1); MemoryRegion *dma_dummy = g_new(MemoryRegion, 1); MemoryRegion *dp8393x_prom = g_new(MemoryRegion, 1); - NICInfo *nd; DeviceState *dev, *rc4030; MMIOKBDState *i8042; SysBusDevice *sysbus; @@ -XXX,XX +XXX,XX @@ static void mips_jazz_init(MachineState *machine, } /* Network controller */ - for (n = 0; n < nb_nics; n++) { - nd = &nd_table[n]; - if (!nd->model) { - nd->model = g_strdup("dp83932"); - } - if (strcmp(nd->model, "dp83932") == 0) { - mips_jazz_init_net(nd, rc4030_dma_mr, rc4030, dp8393x_prom); - break; - } else if (is_help_option(nd->model)) { - error_report("Supported NICs: dp83932"); - exit(1); - } else { - error_report("Unsupported NIC: %s", nd->model); - exit(1); - } + if (nb_nics == 1) { + mips_jazz_init_net(&nd_table[0], rc4030_dma_mr, rc4030, dp8393x_prom); + } else if (nb_nics > 1) { + error_report("This machine only supports one NIC"); + exit(1); } /* SCSI adapter */ -- 2.41.0 From: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru> This patch fixes the race condition in waiting for shutdown of the replay linux test. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Suggested-by: John Snow <jsnow@redhat.com> Message-ID: <20230811070608.3383343-4-pavel.dovgalyuk@ispras.ru> Signed-off-by: Thomas Huth <thuth@redhat.com> --- tests/avocado/replay_linux.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/avocado/replay_linux.py b/tests/avocado/replay_linux.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/replay_linux.py +++ b/tests/avocado/replay_linux.py @@ -XXX,XX +XXX,XX @@ def launch_and_wait(self, record, args, shift): % os.path.getsize(replay_path)) else: vm.event_wait('SHUTDOWN', self.timeout) - vm.shutdown(True) + vm.wait() logger.info('successfully fihished the replay') elapsed = time.time() - start_time logger.info('elapsed time %.2f sec' % elapsed) -- 2.41.0