[PATCH] imx_serial: set wake bit when we receive a data byte

Martin Kaiser posted 1 patch 9 months, 3 weeks ago
There is a newer version of this series
hw/char/imx_serial.c | 3 +++
1 file changed, 3 insertions(+)
[PATCH] imx_serial: set wake bit when we receive a data byte
Posted by Martin Kaiser 9 months, 3 weeks ago
The linux kernel added a flood check for rx data recently in commmit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the uart status register 2. The wake bit
indicates that the receiver detected a start bit. If the kernel sees a
number of rx interrupts without the wake bit being set, it treats this as
spurious data and resets the uart port. imx_serial does never set the
wake bit and triggers the kernel's flood check.

This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
 hw/char/imx_serial.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index ee1375e26d..44125d5f47 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -321,6 +321,9 @@ static void imx_put_data(void *opaque, uint32_t value)
 
 static void imx_receive(void *opaque, const uint8_t *buf, int size)
 {
+    IMXSerialState *s = (IMXSerialState *)opaque;
+
+    s->usr2 |= USR2_WAKE;
     imx_put_data(opaque, *buf);
 }
 
-- 
2.30.2
Re: [PATCH] imx_serial: set wake bit when we receive a data byte
Posted by Philippe Mathieu-Daudé 9 months, 2 weeks ago
Hi Martin,

On 8/6/23 17:41, Martin Kaiser wrote:
> The linux kernel added a flood check for rx data recently in commmit
> 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
> check uses the wake bit in the uart status register 2. The wake bit
> indicates that the receiver detected a start bit. If the kernel sees a
> number of rx interrupts without the wake bit being set, it treats this as
> spurious data and resets the uart port. imx_serial does never set the
> wake bit and triggers the kernel's flood check.
> 
> This patch adds support for the wake bit. wake is set when we receive a
> new character (it's not set for break events). It seems that wake is
> cleared by the kernel driver, the hardware does not have to clear it
> automatically after data was read.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
>   hw/char/imx_serial.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
> index ee1375e26d..44125d5f47 100644
> --- a/hw/char/imx_serial.c
> +++ b/hw/char/imx_serial.c
> @@ -321,6 +321,9 @@ static void imx_put_data(void *opaque, uint32_t value)
>   
>   static void imx_receive(void *opaque, const uint8_t *buf, int size)
>   {
> +    IMXSerialState *s = (IMXSerialState *)opaque;
> +
> +    s->usr2 |= USR2_WAKE;
>       imx_put_data(opaque, *buf);
>   }
>   

Shouldn't we mask this bit for interruptions now?

-- >8 --
diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
index 91c9894ad5..b823f94519 100644
--- a/include/hw/char/imx_serial.h
+++ b/include/hw/char/imx_serial.h
@@ -71,6 +71,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL)

  #define UCR4_DREN       BIT(0)    /* Receive Data Ready interrupt 
enable */
  #define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
+#define UCR4_WKEN       BIT(7)    /* WAKE interrupt enable */

  #define UTS1_TXEMPTY    (1<<6)
  #define UTS1_RXEMPTY    (1<<5)
diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index ee1375e26d..c8ec247350 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -80,7 +80,7 @@ static void imx_update(IMXSerialState *s)
       * TCEN and TXDC are both bit 3
       * RDR and DREN are both bit 0
       */
-    mask |= s->ucr4 & (UCR4_TCEN | UCR4_DREN);
+    mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN);

      usr2 = s->usr2 & mask;
---
Re: [PATCH] imx_serial: set wake bit when we receive a data byte
Posted by Martin Kaiser 9 months, 2 weeks ago
Hi Philippe,

thanks for reviewing my patch.

Philippe Mathieu-Daudé (philmd@linaro.org) wrote:

> Shouldn't we mask this bit for interruptions now?

yes, we should support interrupts from the wake bit. I'll add your
snippet and send a v2.

Thanks,
Martin

> -- >8 --
> diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
> index 91c9894ad5..b823f94519 100644
> --- a/include/hw/char/imx_serial.h
> +++ b/include/hw/char/imx_serial.h
> @@ -71,6 +71,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL)

>  #define UCR4_DREN       BIT(0)    /* Receive Data Ready interrupt enable */
>  #define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
> +#define UCR4_WKEN       BIT(7)    /* WAKE interrupt enable */

>  #define UTS1_TXEMPTY    (1<<6)
>  #define UTS1_RXEMPTY    (1<<5)
> diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
> index ee1375e26d..c8ec247350 100644
> --- a/hw/char/imx_serial.c
> +++ b/hw/char/imx_serial.c
> @@ -80,7 +80,7 @@ static void imx_update(IMXSerialState *s)
>       * TCEN and TXDC are both bit 3
>       * RDR and DREN are both bit 0
>       */
> -    mask |= s->ucr4 & (UCR4_TCEN | UCR4_DREN);
> +    mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN);

>      usr2 = s->usr2 & mask;
> ---
[PATCH v3] imx_serial: set wake bit when we receive a data byte
Posted by Martin Kaiser 9 months, 2 weeks ago
The Linux kernel added a flood check for RX data recently in commit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the UART status register 2. The wake bit
indicates that the receiver detected a start bit on the RX line. If the
kernel sees a number of RX interrupts without the wake bit being set, it
treats this as spurious data and resets the UART port. imx_serial does
never set the wake bit and triggers the kernel's flood check.

This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.

The wake bit can be configured as an interrupt source. Support this
mechanism as well.

Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
v3:
 - fix some spelling mistakes in the commit message
 - add Philippe's Reviewed-by

v2:
 - support interrupts from wake
 - clean up the commit message

 hw/char/imx_serial.c         | 5 ++++-
 include/hw/char/imx_serial.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index ee1375e26d..1b75a89588 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -80,7 +80,7 @@ static void imx_update(IMXSerialState *s)
      * TCEN and TXDC are both bit 3
      * RDR and DREN are both bit 0
      */
-    mask |= s->ucr4 & (UCR4_TCEN | UCR4_DREN);
+    mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN);
 
     usr2 = s->usr2 & mask;
 
@@ -321,6 +321,9 @@ static void imx_put_data(void *opaque, uint32_t value)
 
 static void imx_receive(void *opaque, const uint8_t *buf, int size)
 {
+    IMXSerialState *s = (IMXSerialState *)opaque;
+
+    s->usr2 |= USR2_WAKE;
     imx_put_data(opaque, *buf);
 }
 
diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
index 91c9894ad5..b823f94519 100644
--- a/include/hw/char/imx_serial.h
+++ b/include/hw/char/imx_serial.h
@@ -71,6 +71,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL)
 
 #define UCR4_DREN       BIT(0)    /* Receive Data Ready interrupt enable */
 #define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
+#define UCR4_WKEN       BIT(7)    /* WAKE interrupt enable */
 
 #define UTS1_TXEMPTY    (1<<6)
 #define UTS1_RXEMPTY    (1<<5)
-- 
2.30.2


Re: [PATCH v3] imx_serial: set wake bit when we receive a data byte
Posted by Peter Maydell 9 months, 1 week ago
On Thu, 15 Jun 2023 at 15:24, Martin Kaiser <martin@kaiser.cx> wrote:
>
> The Linux kernel added a flood check for RX data recently in commit
> 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
> check uses the wake bit in the UART status register 2. The wake bit
> indicates that the receiver detected a start bit on the RX line. If the
> kernel sees a number of RX interrupts without the wake bit being set, it
> treats this as spurious data and resets the UART port. imx_serial does
> never set the wake bit and triggers the kernel's flood check.
>
> This patch adds support for the wake bit. wake is set when we receive a
> new character (it's not set for break events). It seems that wake is
> cleared by the kernel driver, the hardware does not have to clear it
> automatically after data was read.
>
> The wake bit can be configured as an interrupt source. Support this
> mechanism as well.
>
> Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>



Applied to target-arm.next, thanks.

-- PMM
Re: [PATCH v3] imx_serial: set wake bit when we receive a data byte
Posted by Philippe Mathieu-Daudé 9 months, 1 week ago
On 19/6/23 12:36, Peter Maydell wrote:
> On Thu, 15 Jun 2023 at 15:24, Martin Kaiser <martin@kaiser.cx> wrote:
>>
>> The Linux kernel added a flood check for RX data recently in commit
>> 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
>> check uses the wake bit in the UART status register 2. The wake bit
>> indicates that the receiver detected a start bit on the RX line. If the
>> kernel sees a number of RX interrupts without the wake bit being set, it
>> treats this as spurious data and resets the UART port. imx_serial does
>> never set the wake bit and triggers the kernel's flood check.
>>
>> This patch adds support for the wake bit. wake is set when we receive a
>> new character (it's not set for break events). It seems that wake is
>> cleared by the kernel driver, the hardware does not have to clear it
>> automatically after data was read.
>>
>> The wake bit can be configured as an interrupt source. Support this
>> mechanism as well.
>>
>> Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>

>> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
>> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> 
> 
> 
> Applied to target-arm.next, thanks.
> 
> -- PMM


[PATCH v2] imx_serial: set wake bit when we receive a data byte
Posted by Martin Kaiser 9 months, 2 weeks ago
The linux kernel added a flood check for rx data recently in commmit
496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
check uses the wake bit in the uart status register 2. The wake bit
indicates that the receiver detected a start bit on the rx line. If the
kernel sees a number of rx interrupts without the wake bit being set, it
treats this as spurious data and resets the uart port. imx_serial does
never set the wake bit and triggers the kernel's flood check.

This patch adds support for the wake bit. wake is set when we receive a
new character (it's not set for break events). It seems that wake is
cleared by the kernel driver, the hardware does not have to clear it
automatically after data was read.

The wake bit can be configured as an interrupt source. Support this
mechanism as well.

Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
v2:
 - support interrupts from wake
 - clean up the commit message

 hw/char/imx_serial.c         | 5 ++++-
 include/hw/char/imx_serial.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index ee1375e26d..1b75a89588 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -80,7 +80,7 @@ static void imx_update(IMXSerialState *s)
      * TCEN and TXDC are both bit 3
      * RDR and DREN are both bit 0
      */
-    mask |= s->ucr4 & (UCR4_TCEN | UCR4_DREN);
+    mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN);
 
     usr2 = s->usr2 & mask;
 
@@ -321,6 +321,9 @@ static void imx_put_data(void *opaque, uint32_t value)
 
 static void imx_receive(void *opaque, const uint8_t *buf, int size)
 {
+    IMXSerialState *s = (IMXSerialState *)opaque;
+
+    s->usr2 |= USR2_WAKE;
     imx_put_data(opaque, *buf);
 }
 
diff --git a/include/hw/char/imx_serial.h b/include/hw/char/imx_serial.h
index 91c9894ad5..b823f94519 100644
--- a/include/hw/char/imx_serial.h
+++ b/include/hw/char/imx_serial.h
@@ -71,6 +71,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState, IMX_SERIAL)
 
 #define UCR4_DREN       BIT(0)    /* Receive Data Ready interrupt enable */
 #define UCR4_TCEN       BIT(3)    /* TX complete interrupt enable */
+#define UCR4_WKEN       BIT(7)    /* WAKE interrupt enable */
 
 #define UTS1_TXEMPTY    (1<<6)
 #define UTS1_RXEMPTY    (1<<5)
-- 
2.30.2


Re: [PATCH v2] imx_serial: set wake bit when we receive a data byte
Posted by Philippe Mathieu-Daudé 9 months, 2 weeks ago
On 15/6/23 11:30, Martin Kaiser wrote:
> The linux kernel added a flood check for rx data recently in commmit

"Linux", "commit"

Also maybe s/rx/RX/ s/uart/UART/.

> 496a4471b7c3 ("serial: imx: work-around for hardware RX flood"). This
> check uses the wake bit in the uart status register 2. The wake bit
> indicates that the receiver detected a start bit on the rx line. If the
> kernel sees a number of rx interrupts without the wake bit being set, it
> treats this as spurious data and resets the uart port. imx_serial does
> never set the wake bit and triggers the kernel's flood check.
> 
> This patch adds support for the wake bit. wake is set when we receive a
> new character (it's not set for break events). It seems that wake is
> cleared by the kernel driver, the hardware does not have to clear it
> automatically after data was read.
> 
> The wake bit can be configured as an interrupt source. Support this
> mechanism as well.
> 
> Co-developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

Thanks ;)

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>

> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> v2:
>   - support interrupts from wake
>   - clean up the commit message
> 
>   hw/char/imx_serial.c         | 5 ++++-
>   include/hw/char/imx_serial.h | 1 +
>   2 files changed, 5 insertions(+), 1 deletion(-)