[PATCH 19/23] hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros

Philippe Mathieu-Daudé posted 23 patches 6 months, 1 week ago
There is a newer version of this series
[PATCH 19/23] hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
Posted by Philippe Mathieu-Daudé 6 months, 1 week ago
These macros only save 3 chars and make the code harder
to maintain, simply remove them.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/sd/sd.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 8d63a39a54..ca2c903c5b 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -816,8 +816,6 @@ static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
     }
 }
 
-#define BLK_READ_BLOCK(a, len)  sd_blk_read(sd, a, len)
-#define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len)
 #define APP_READ_BLOCK(a, len)  memset(sd->data, 0xec, len)
 #define APP_WRITE_BLOCK(a, len)
 
@@ -869,7 +867,7 @@ static void sd_erase(SDState *sd)
                 continue;
             }
         }
-        BLK_WRITE_BLOCK(erase_addr, erase_len);
+        sd_blk_write(sd, erase_addr, erase_len);
     }
 }
 
@@ -1901,7 +1899,7 @@ void sd_write_byte(SDState *sd, uint8_t value)
         if (sd->data_offset >= sd->blk_len) {
             /* TODO: Check CRC before committing */
             sd->state = sd_programming_state;
-            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
+            sd_blk_write(sd, sd->data_start, sd->data_offset);
             sd->blk_written ++;
             sd->csd[14] |= 0x40;
             /* Bzzzzzzztt .... Operation complete.  */
@@ -1927,7 +1925,7 @@ void sd_write_byte(SDState *sd, uint8_t value)
         if (sd->data_offset >= sd->blk_len) {
             /* TODO: Check CRC before committing */
             sd->state = sd_programming_state;
-            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
+            sd_blk_read(sd, sd->data_start, sd->data_offset);
             sd->blk_written++;
             sd->data_start += sd->blk_len;
             sd->data_offset = 0;
@@ -2075,8 +2073,9 @@ uint8_t sd_read_byte(SDState *sd)
         break;
 
     case 17:  /* CMD17:  READ_SINGLE_BLOCK */
-        if (sd->data_offset == 0)
-            BLK_READ_BLOCK(sd->data_start, io_len);
+        if (sd->data_offset == 0) {
+            sd_blk_read(sd, sd->data_start, io_len);
+        }
         ret = sd->data[sd->data_offset ++];
 
         if (sd->data_offset >= io_len)
@@ -2089,7 +2088,7 @@ uint8_t sd_read_byte(SDState *sd)
                                   sd->data_start, io_len)) {
                 return 0x00;
             }
-            BLK_READ_BLOCK(sd->data_start, io_len);
+            sd_blk_read(sd, sd->data_start, io_len);
         }
         ret = sd->data[sd->data_offset ++];
 
-- 
2.41.0


Re: [PATCH 19/23] hw/sd/sdcard: Inline BLK_READ_BLOCK / BLK_WRITE_BLOCK macros
Posted by Cédric Le Goater 6 months, 1 week ago
On 6/21/24 10:05 AM, Philippe Mathieu-Daudé wrote:
> These macros only save 3 chars and make the code harder
> to maintain, simply remove them.
> 
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>


Reviewed-by: Cédric Le Goater <clg@redhat.com>

Thanks,

C.


> ---
>   hw/sd/sd.c | 15 +++++++--------
>   1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/hw/sd/sd.c b/hw/sd/sd.c
> index 8d63a39a54..ca2c903c5b 100644
> --- a/hw/sd/sd.c
> +++ b/hw/sd/sd.c
> @@ -816,8 +816,6 @@ static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
>       }
>   }
>   
> -#define BLK_READ_BLOCK(a, len)  sd_blk_read(sd, a, len)
> -#define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len)
>   #define APP_READ_BLOCK(a, len)  memset(sd->data, 0xec, len)
>   #define APP_WRITE_BLOCK(a, len)
>   
> @@ -869,7 +867,7 @@ static void sd_erase(SDState *sd)
>                   continue;
>               }
>           }
> -        BLK_WRITE_BLOCK(erase_addr, erase_len);
> +        sd_blk_write(sd, erase_addr, erase_len);
>       }
>   }
>   
> @@ -1901,7 +1899,7 @@ void sd_write_byte(SDState *sd, uint8_t value)
>           if (sd->data_offset >= sd->blk_len) {
>               /* TODO: Check CRC before committing */
>               sd->state = sd_programming_state;
> -            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
> +            sd_blk_write(sd, sd->data_start, sd->data_offset);
>               sd->blk_written ++;
>               sd->csd[14] |= 0x40;
>               /* Bzzzzzzztt .... Operation complete.  */
> @@ -1927,7 +1925,7 @@ void sd_write_byte(SDState *sd, uint8_t value)
>           if (sd->data_offset >= sd->blk_len) {
>               /* TODO: Check CRC before committing */
>               sd->state = sd_programming_state;
> -            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
> +            sd_blk_read(sd, sd->data_start, sd->data_offset);
>               sd->blk_written++;
>               sd->data_start += sd->blk_len;
>               sd->data_offset = 0;
> @@ -2075,8 +2073,9 @@ uint8_t sd_read_byte(SDState *sd)
>           break;
>   
>       case 17:  /* CMD17:  READ_SINGLE_BLOCK */
> -        if (sd->data_offset == 0)
> -            BLK_READ_BLOCK(sd->data_start, io_len);
> +        if (sd->data_offset == 0) {
> +            sd_blk_read(sd, sd->data_start, io_len);
> +        }
>           ret = sd->data[sd->data_offset ++];
>   
>           if (sd->data_offset >= io_len)
> @@ -2089,7 +2088,7 @@ uint8_t sd_read_byte(SDState *sd)
>                                     sd->data_start, io_len)) {
>                   return 0x00;
>               }
> -            BLK_READ_BLOCK(sd->data_start, io_len);
> +            sd_blk_read(sd, sd->data_start, io_len);
>           }
>           ret = sd->data[sd->data_offset ++];
>